Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Uniform Quantum Transport Properties Across Different Chemical Decorations in Bilayer Graphene

The electronic and quantum transport properties of AB-stacked bilayer graphene nanoribbons with various types of chemical and structural modifications are investigated numerically. First-principles calculations evidence that, for parallel ribbons separated by the typical graphitic van der Waals-bond distance, the modification of one ribbon affects the electronic structure of both layers. Oxygen atoms in epoxide configuration, sp3-type defects, p- and ntype doping and Stone-Wales defects are found to enhance the inter-layer coupling, introduce quasi-bound states that extend over both ribbons, and affect the conductance of the bilayered network. Most of the impurities exhibit an acceptor-like character that leads to asymmetric electron-hole transmission profiles, providing the possibility of creating mobility gaps that are nearly independent of the type of external modification. initially small band gap of the bilayer with different strengths.

Lopez-Bezanilla, Alejandro↗

Impact of preparation condition of ZnO electron transport layer on performance of hybrid organic-inorganic light-emitting diodes

In this article, we have demonstrated the hybrid polymer light-emitting diodes (PLEDs) with a sol-gel derived or rf-sputtered ZnO electron transport layer (ETL). For the ZnO films prepared under different conditions, low annealing temperature (300 °C) leads to the film amorphous while the polycrystalline films is readily achieved by sputtering. Though the surface roughness can be improved by thermal annealing at 400 °C for sputtered films, the release of compressive stress after treatment has shrunk the optical band gap from 3.282 to 3.268 eV. As the ETL in PLEDs, the reduced band gap could increase potential barrier for electron injection and decrease the hole blocking capability. In our cases, luminance larger than 7000 cd/m{sup 2} can be obtained in device with pristine sputtered ZnO ETL. It is concluded that crystalline structure of ZnO films is important to facilitate the balance of carrier mobility to obtain high luminance and high efficiency devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Embedded boron nitride domains in graphene nanoribbons for transport gap engineering

In this study, we numerically investigate the impact of boron nitride (BN) domains on the transport properties of graphene nanoribbons with lengths ranging from a few to several hundreds of nanometers and lateral size up to 4 nm. By varying the size and morphology of the BN islands embedded in the graphene matrix, a wide transport tunability is obtained from perfect insulating interfaces to asymmetric electron-hole transmission profiles, providing the possibility to engineer mobility gaps to improve device performances. Even in the low-density limit of embedded BN islands, transport properties are found to be highly dependent on both the BN-domain shape and the size with a strong tendency toward an insulating regime when increasing the number of ionic bonds in the ribbon. This versatility of conduction properties offers remarkable opportunities for transport gap engineering for the design of complex device architectures based on a newly synthesized one-atom hybrid layered material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Carrier Transport in Iron Pyrite Thin Films: Disorder-Induced Variable-Range Hopping

Here, the origin of p-type conductivity and the mechanism responsible for low carrier mobility were investigated in pyrite (FeS 2 ) thin films. Temperature-dependent resistivity measurements (10-400 K) were performed on polycrystalline and nanostructured thin films prepared by three different methods: (1) spray pyrolysis, (2) hot-injection synthesized and spin-coated nanocubes, and (3) pulsed laser deposition. The films have a high hole density (10 18 -10 19 ) cm -3 and low mobility (0.1-4 cm 2 V -1 s -1 ) regardless of the method used for their preparation. The charge transport mechanism is determined to be thermally activated conduction (TAC) at near room temperature, with Mott-type variable-range hopping (VRH) of holes via localized states occurring at lower temperatures. The density functional theory (DFT) predicts that sulfur vacancy induces localized defect states within the band gap and the charge remains localized around the defect. The data indicates that the electronic properties including hopping transport in pyrite thin films can be correlated to sulfur vacancy-related defects. The results provide insights into the electronic properties of pyrite thin films and their implications for charge transport.

36 MATERIALS SCIENCE↗

Atmospheric pressure route to epitaxial nitrogen-doped trilayer graphene on 4H-SiC (0001) substrate

Large-area graphene film doped with nitrogen is of great interest for a wide spectrum of nanoelectronics applications, such as field effect devices, super capacitors, and fuel cells among many others. Here, we report on the structural and electronic properties of nitrogen doped trilayer graphene on 4H-SiC (0001) grown under atmospheric pressure. The trilayer nature of the growth is evidenced by scanning transmission electron microscopy. X-ray photoelectron spectroscopy shows the incorporation of 1.2% of nitrogen distributed in pyrrolic-N, and pyridinic-N configurations as well as a graphitic-N contribution. This incorporation causes an increase in the D band on the Raman signature indicating that the nitrogen is creating defects. Ultraviolet photoelectron spectroscopy shows a decrease of the work function of 0.3 eV due to the N-type doping of the nitrogen atoms in the carbon lattice and the edge defects. A top gate field effect transistor device has been fabricated and exhibits carrier mobilities up to 1300 cm{sup 2}/V s for holes and 850 cm{sup 2}/V s for electrons at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of carrier transport properties in strained crystalline Si wall-like structures in the quasi-quantum regime

We report the transport characteristics of both electrons and holes through narrow constricted crystalline Si “wall-like” long-channels that were surrounded by a thermally grown SiO{sub 2} layer. The strained buffering depth inside the Si region (due to Si/SiO{sub 2} interfacial lattice mismatch) is where scattering is seen to enhance some modes of the carrier-lattice interaction, while suppressing others, thereby changing the relative value of the effective masses of both electrons and holes, as compared to bulk Si. In the narrowest wall devices, a considerable increase in conductivity was observed as a result of higher carrier mobilities due to lateral constriction and strain. The strain effects, which include the reversal splitting of light- and heavy-hole bands as well as the decrease of conduction-band effective mass by reduced Si bandgap energy, are formulated in our microscopic model for explaining the experimentally observed enhancements in both conduction- and valence-band mobilities with reduced Si wall thickness. Also, the enhancements of the valence-band and conduction-band mobilities are found to be associated with different aspects of theoretical model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detailed Studies of Pixelated CZT Detectors Grown with the Modified Horizontal Bridgman Method

The detector material Cadmium Zinc Telluride (CZT) achieves excellent spatial resolution and good energy resolution over a broad energy range, several keV up to some MeV. Presently, there are two main methods to grow CZT crystals, the Modified High-Pressure Bridgman (MHB) and the High-Pressure Bridgman (HPB) process. The study presented in this paper is based on MHB CZT substrates from the company Orbotech Medical Solutions Ltd. [Orbotech Medical Solutions Ltd., 10 Plaut St., Park Rabin, P.O. Box 2489, Rehovot, Israel, 76124]. Former studies have shown that high-work-function materials on the cathode side reduce the leakage current and, therefore, improve the energy resolution at lower energies. None of the studies have emphasized on the anode contact material. Therefore, we present in this paper the result of a detailed study in which for the first time the cathode material was kept constant and the anode material was varied. We used four different anode materials: Indium, Titanium, Chromium and Gold, metals with work-functions between 4.1 eV and 5.1 eV. The detector size was 2.0 x 2.0 x 0.5 cu cm with 8 x 8 pixels and a pitch of 2.46 mm. The best performance was achieved with the low-work-function materials Indium and Titanium with energy resolutions of 2.0 keV (at 59 keV) and 1.9 keV (at 122 keV) for Titanium and 2.1 keV (at 59 keV) and 2.9 keV (at 122 keV) for Indium. Taking into account the large pixel pitch of 2.46 mm, these resolutions are very competitive in comparison to those achieved with detectors made of material produced with the more expensive conventional HPB method. We present a detailed comparison of our detector response with 3D simulations. The latter comparisons allow us to determine the mobility-lifetime-products (mu tau-products) for electrons and holes. Finally, we evaluated the temperature dependency of the detector performance and ls-products. For many applications temperature dependence is important, therefore, we extended the scope of our study to temperatures as low as -30 C. There are two important results. The breakdown voltage increases with decreasing temperature, and electron mobility-lifetime-product decreases by about 30% over a range from 20 C to -30 C. The latter effect causes the energy resolution to deteriorate, but the concomitantly increasing breakdown voltage makes it possible to increase the applied bias voltage and restore the full performance

Jung, I.↗

Lunar deep drill apparatus

Proposed as a baseline configuration, this rotary drill apparatus is designed to produce 100-mm diameter holes in the lunar surface at depths up to 50 meters. The drill is intended to acquire samples for scientific analysis, mineral resource location, calibration of electronic exploration devices, and foundation analysis at construction sites. It is also intended to prepare holes for emplacement of scientific instruments, the setting of structural anchors, and explosive methods in excavation and mining activities. Defined as a deep drill because of the modular drill string, it incorporates an automatic rod changer. The apparatus is teleoperated from a remote location, such as earth, utilizing supervisory control techniques. It is thus suitable for unmanned and man-tended operation. Proven terrestrial drilling technology is used to the extent it is compatible with the lunar environment. Augers and drive tubes form holes in the regolith and may be used to acquire loose samples. An inertial cutting removal system operates intermittently while rock core drilling is in progress. The apparatus is carried to the work site by a three-legged mobile platform which also provides a 2-meter feed along the hole centerline, an off-hole movement of approximately .5 meters, an angular alignment of up to 20 deg. from gravity vertical, and other dexterity required in handling rods and samples. The technology can also be applied using other carriers which incorporate similar motion capabilities. The apparatus also includes storage racks for augers, rods, and ancillary devices such as the foot-plate that holds the down-hole tooling during rod changing operations.

Source record↗

Characterization of Shallow, Undoped Ge/SiGe Quantum Wells Commercially Grown on 8-in. (100) Si Wafers

Hole spins in Ge quantum wells have shown success in both spintronic and quantum applications, thereby increasing the demand for high-quality material. We performed material analysis and device characterization of commercially grown shallow and undoped Ge/SiGe quantum well heterostructures on 8-in. (100) Si wafers. Material analysis reveals the high crystalline quality, sharp interfaces, and uniformity of the material. We demonstrate a high mobility (1.7 × 10 5 cm 2 V –1 s –1 ) 2D hole gas in a device with a conduction threshold density of 9.2 × 10 10 cm –2 . We study the use of surface preparation as a tool to control barrier thickness, density, mobility, and interface trap density. We report interface trap densities of 6 × 10 12 eV –1 . Our results validate the material’s high quality and show that further investigation into improving device performance is needed. We conclude that surface preparations which include weak Ge etchants, such as dilute H 2 O 2 , can be used for postgrowth control of quantum well depth in Ge-rich SiGe while still providing a relatively smooth oxide–semiconductor interface. Our results show that interface state density is mostly independent of our surface preparations, thereby implying that a Si cap layer is not necessary for device performance. Transport in our devices is instead limited by the quantum well depth. Commercially sourced Ge/SiGe, such as studied here, will provide accessibility for future investigations.

36 MATERIALS SCIENCE↗

Properties of antimony doped ZnO thin films deposited by spray pyrolysis technique

Antimony (Sb) doped zinc oxide (ZnO) thin films were deposited on the glass substrate at 450°C using spray pyrolysis technique. Effect of Sb doping on surface morphology structural, optical and electrical properties were studied. X-ray diffraction (XRD) analysis showed that both the undoped and doped ZnO thin films are polycrystalline in nature with (101) preferred orientation. SEM analysis showed a change in surface morphology of Sb doped ZnO thin films. Doping results in a marked increase in conductivity without affecting the transmittance of the films. ZnO films prepared with 3 at % Sb shows the lowest resistivity of 0.185 Ohm cm with a Hall mobility of 54.05 cm{sup 2} V{sup –1} s{sup –1}, and a hole concentration of 6.25 × 10{sup 17} cm{sup –3}.

36 MATERIALS SCIENCE↗

Fabrication and characterisation of gallium arsenide ambipolar quantum point contacts

We show that ballistic one-dimensional channels can be formed in an ambipolar device fabricated on a high mobility Al{sub 0.34}Ga{sub 0.66}As/GaAs heterostructure. Both electron and hole quantised conductances can be measured in the same one-dimensional channel. We have used this device to compare directly the subband spacings of the two charge carriers in the same confining potential and used this to compare the electron and hole effective masses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Infrared analysis of hole properties of Mg-doped p-type InN films

Mg-doped InN films grown by plasma-assisted molecular beam epitaxy were characterized by infrared reflectance. Signatures of p-type conductivity in the spectra were obtained in the same doping density range where the existence of net acceptors was found by electrolyte capacitance-voltage measurements. Numerical spectrum analysis, which takes into account the large broadening factor of the normal mode energies of longitudinal optical phonon-plasmon coupling yielded high hole densities in the range of (0.1-1.2)x10{sup 19} cm{sup -3} and optical mobilities in the range of 25-70 cm{sup 2}/V s.

36 MATERIALS SCIENCE↗

Formation of secondary electron cascades in single-crystalline plasma-deposited diamond upon exposure to femtosecond x-ray pulses

Secondary electron cascades were measured in high purity single-crystalline chemical vapor deposition (CVD) diamond, following exposure to ultrashort hard x-ray pulses (140 fs full width at half maximum, 8.9 keV energy) from the Sub-Picosecond Pulse Source at the Stanford Linear Accelerator Center. We report measurements of the pair creation energy and of drift mobility of carriers in two CVD diamond crystals. This was done for the first time using femtosecond x-ray excitation. Values for the average pair creation energy were found to be 12.17{+-}0.57 and 11.81{+-}0.59 eV for the two crystals, respectively. These values are in good agreement with recent theoretical predictions. The average drift mobility of carriers, obtained by the best fit to device simulations, was {mu}{sub h}=2750 cm{sup 2}/V s for holes and was {mu}{sub e}=2760 cm{sup 2}/V s for electrons. These mobility values represent lower bounds for charge mobilities due to possible polarization of the samples. The results demonstrate outstanding electric properties and the enormous potential of diamond in ultrafast x-ray detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppressing Charged Cation Antisites via Se Vapor Annealing Enables p-Type Dopability in AgBiSe 2 –SnSe Thermoelectrics

Cation disordering is commonly found in multinary cubic compounds, but its effect on electronic properties has been neglected because of difficulties in determining the ordered structure and defect energetics. An absence of rational understanding of the point defects present has led to poor reproducibility and uncontrolled conduction type. AgBiSe 2 is a representative compound that suffers from poor reproducibility of thermoelectric properties, while the origins of its intrinsic n-type conductivity remain speculative. Here, it is demonstrated that cation disordering is facilitated by Bi Ag charged antisite defects in cubic AgBiSe 2 which also act as a principal donor defect that greatly controls the electronic properties. Using density functional theory calculations and in situ Raman spectroscopy, how saturation annealing with selenium vapor can stabilize p-type conductivity in cubic AgBiSe 2 alloyed with SnSe at high temperatures is elucidated. With stable and controlled hole concentration, a peak is observed in the weighted mobility and the density-of-states effective mass in AgBiSnSe 3 , implying an increased valley degeneracy in this system. These findings corroborate the importance of considering the defect energetics for exploring the dopability of ternary thermoelectric chalcogenides and engineering electronic bands by controlling self-doping.

36 MATERIALS SCIENCE↗

First-principles study of the electronic structures of alpha-rhombohedral boron codoped with lithium and oxygen

alpha-Rhombohedral (alpha-rh) boron, which is the most stable of boron's polymorphs at low temperatures, has p-type semiconductive properties. There have been some attempts to dope the interstitial sites with alkali atoms to create metallic or n-type semiconductive alpha-rh boron, but this has yet to be achieved. In a previous work, we proposed the codoping of alpha-rh boron with Li and P or As, and revealed from first principles calculations that B{sub 12}PLi and B{sub 12}AsLi could be synthesized and become narrow-gap semiconductors. The band structure suggested that the mobility of electrons might be greater than that of holes. In this paper, based on these prospective results, we selected a new combination of dopants, Li and O, and theoretically studied such compounds as B{sub 12}OLi and B{sub 12}O{sub 2}Li. The results showed that both of these materials are metallic, while the reaction energies of the Li insertion into B{sub 12}O and B{sub 12}O{sub 2} are lower (more unstable) than with B{sub 12}PLi and B{sub 12}AsLi. It was proved that the differences in the electronic structures are caused by the dangling bonds of the dopant atoms, O, P and As. - Graphical abstract: Density of electrons of B{sub 12}O{sub 2}, B{sub 12}OLi and B{sub 12}O{sub 2}Li. The unit is electron/(a.u.){sup 3}.

36 MATERIALS SCIENCE↗

Thermodynamics, local structure, and transport of protons in triple-conducing oxide, BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3-δ (BCFZY4411)

Triple-conducting oxides (TCOs) are an emerging class of mixed ionic and electronically conducting materials that show great promise for oxygen reduction/oxygen evolution (ORR/OER) electrocatalysis—primarily in high-temperature ceramic electrochemical cells— but also in aqueous alkaline environments. Their high activity is attributed, at least in part, to their ability to incorporate and transport three mobile charge carriers: protons, oxygen vacancies, and electron-holes Despite their promise, fundamental studies of TCOs are challenging, as transport dynamics from three charge carriers cannot be fully disentangled via traditional electrical measurement techniques. Characterizing proton dynamics in TCOs is particularly difficult as protons are generally the minority carrier, and their conduction response is typically obscured by the oxygen vacancies and electron holes. Here, we demonstrate successful isolation of the proton behavior in an archetypal TCO, BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3-δ (BCFZY4411), using a combination of non-electrical techniques. We determine proton uptake and oxygen non-stoichiometry (δ) using thermogravimetric analysis (TGA). X-ray absorption near edge structure (XANES) and neutron diffraction (ND) are used to validate the oxidation state of Co and the δ values obtained through TGA. We apply 1H solid-state magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) to provide insights into local structure, dynamics, and proton kinetics. Finally, the proton transport properties are further quantified using tracer isotope exchange with time-of-flight secondary ion mass spectrometry (ToF-SIMS). Despite the very low proton concentrations in BCFZY4411 (<0.2% under most conditions), our analysis suggests that the oxygen Manuscript File Click here to view linked References 2 reduction and evolution reactions are nevertheless limited by the oxygen ion kinetics (e.g., oxygen surface exchange) rather than the proton kinetics at the reduced operating temperatures (<500 °C) that are targeted for electrochemical cell applications. These findings provide a comprehensive understanding of proton behavior in BCFZY4411 and pave the way for advancing the fundamental study of TCOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TlHgInS 3 : An Indirect-Band-Gap Semiconductor with X-ray Photoconductivity Response

The quaternary compound TlHgInS3 crystallizes in a new structure type of space group, C2/c, with cell parameters a = 13.916(3) angstrom, b = 3.9132(8) angstrom, c = 21.403(4) angstrom, beta = 104.16(3)degrees, V = 1130.1(8) angstrom(3), and rho = 7.241 g/cm(3). The structure is a unique three-dimensional framework with parallel tunnels, which is formed by (1)(infinity)[InS33-] infinite chains bridged by linearly coordinated Hg2+ ions. TlHgInS3 is a semiconductor with a band gap of 1.74 eV and a resistivity of similar to 4.32 G Omega cm. TlHgInS3 single crystals exhibit photocurrent response when exposed to Ag X-rays. The mobility-lifetime product (mu tau) of the electrons and holes estimated from the photocurrent measurements are (mu tau)(e) approximate to 3.6 x 10(-4) cm(2)/V and (mu tau)(h) approximate to 2.0 x 10(-4) cm(2)/V. Electronic structure calculations at the density functional theory level indicate an indirect band gap and a relatively small effective mass for both electrons and holes. Based on the photoconductivity data, TlHgInS3 is a potential material for radiation detection applications.

Li, Hao↗