Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grain boundary diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Heteroepitaxial film silicon solar cell grown on Ni-W foils

Today, silicon-wafer-based technology dominates the photovoltaic (PV) industry because it enables high efficiency, is produced from abundant, non-toxic materials and is proven in the PV marketplace.[1] However, costs associated with the wafer itself limit ultimate cost reductions.[1,2] PV based on absorber layers of crystalline Si with only 2 to 10 m thickness are a promising route to reduce these costs, while maintaining efficiencies above 15%.[3-5] With the goal of fabricating low-cost film crystalline Si (c-Si), recent research has explored wafer peeling,[6,7] crystallization of amorphous silicon films on glass,[4,8-10] and seed and epitaxy approaches.[3,5,11] In this third approach, one initially forms a seed layer that establishes the grain size and crystalline order. The Si layer is then grown heteroepitaxially on the seed layer, so that it replicates the seed crystal structure. In all of these film c-Si approaches, the critical challenge is to grow c-Si with adequate material quality: specifically, the diffusion length (LD) must be at least three times the film thickness.[12] In polycrystalline Si films, grain boundaries (GBs) are recombination-active and significantly reduce LD. This adverse effects of GBs motivates research into growth of large grained c-Si [13,14] (for a low density of GBs) and biaxially-textured c-Si [11] (for low-angle GBs).

Wee, Sung Hun↗

Capture efficiency and bias from the defect dynamics near grain boundaries in BCC Fe using mesoscale simulations

The capture efficiency describes the capability of a sink, such as a grain boundary (GB), dislocation, and void, to absorb point defects (PDs). The bias defines the difference in capture efficiency between the absorption of a vacancy and dumbbell at a sink. Complete kinetic information on PDs, including diffusion barriers and diffusion orientations, as well as accurate saddle points, are needed to determine the capture efficiency and bias at a sink accurately, which is computationally demanding. Here, in the present study, the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC) method was used to investigate the defect dynamics of PDs near different types of grain boundaries (GBs) (with both $\langle$100$\rangle$ and $\langle$110$\rangle$ families) accurately in body-centered cubic (BCC) iron (Fe). The capture efficiency, sink strength, and bias factor of different types of GBs were determined in Fe, which, different from traditional rate theory estimation, showed a distinct capture efficiency, sink strength, and bias in different GBs. The results demonstrate a strong positive correlation between the capture efficiency and the GB strain width, instead of the GB misorientation, GB energy, or GB-PD binding energy, which have been investigated previously. This work provides valuable insight into the radiation-induced microstructural evolution of GBs.

36 MATERIALS SCIENCE↗

Atomistic simulations and machine learning of solute grain boundary segregation in Mg alloys at finite temperatures

Understanding solute segregation thermodynamics is the first step in investigating grain boundary (GB) properties, such as strong yttrium (Y) effects on grain growth and texture evolution in micro-scale polycrystalline magnesium (Mg) alloys. To estimate the average GB segregation behavior in low-solute-concentration Mg alloys (e.g., 2 at.% Y), a state-of-the-art spectral approach is applied based on a per-site segregation energy spectrum for Y solute atoms at zero K obtained from molecular statistics (MS) simulations of ~10 4 GB sites in Mg symmetric tilt GBs (STGBs). Although selected MS simulation results are consistent with verification by density functional theory (DFT) calculations, estimates of average segregation tendency based on the zero-K energy spectrum deviate from experimental observations. To resolve this problem, thermodynamic integration (TI) methods based on molecular dynamics (MD) simulations are used to determine the per-site segregation free energies of Y at representative GB sites, which show contributions beyond harmonic approximations can be important for certain GB sites at high temperatures. A surrogate model of per-site segregation free energy is constructed from a small set of TI data points using stacking cross-validation regressors and physics-informed descriptors. This model is applied to predict the Y segregation free energy spectra for thousands of GB sites in Mg STGBs with uncertainty quantification. Finally, the average segregation tendency predicted by the spectral approach based on the free energy spectra agrees well (within the uncertainty range) with experimental observations for micro-scale polycrystalline Mg alloys at typical thermomechanical processing temperatures (500 ~ 800 K), where thermodynamic equilibrium states are likely to be achieved due to fast diffusion.

Atomistic simulations↗

Bulk and Short-Circuit Anion Diffusion in Epitaxial Fe 2 O 3 Films Quantified Using Buried Isotopic Tracer Layers

Self-diffusion is a fundamental physical process that, in solid materials, is intimately correlated with both microstructure and functional properties. In this work, a universal approach is presented to precisely characterize self-diffusion in ionic solids by isotopically enriching anions and/or cations at specific locations within an epitaxial film stack, and characterize their redistribution at high spatial resolution with atom probe tomography. Nanoscale anion diffusivity is quantified in epitaxial α-Fe 2 O 3 thin films deposited by molecular beam epitaxy with a thin (10 nm) buried layer highly enriched in 18 O. The isotopic sensitivity of the atom probe allows precise measurement of 18 O distribution across the sharp interfaces between this layer and the surrounding Fe 2 O 3 after annealing. Short-circuit anion diffusion through 1D and 2D structural defects in Fe 2 O 3 are also directly visualized in 3D. This versatile approach to study precisely tailored thin film samples at high spatial and mass fidelity will facilitate a deeper understanding of atomic-scale diffusion phenomena.

36 MATERIALS SCIENCE↗

Response of nanostructured ferritic alloys to high-dose heavy ion irradiation

A latest-generation aberration-corrected scanning/transmission electron microscope (STEM) is used to study heavy-ion-irradiated nanostructured ferritic alloys (NFAs). Results are presented for STEM X-ray mapping of NFA 14YWT irradiated with 10 MeV Pt to 16 or 160 dpa at -100°C and 750°C, as well as pre-irradiation reference material. Irradiation at -100°C results in ballistic destruction of the beneficial microstructural features present in the pre-irradiated reference material, such as Ti-Y-O nanoclusters (NCs) and grain boundary (GB) segregation. Irradiation at 750°C retains these beneficial features, but indicates some coarsening of the NCs, diffusion of Al to the NCs, and a reduction of the Cr-W GB segregation (or solute excess) content. Ion irradiation combined with the latest-generation STEM hardware allows for rapid screening of fusion candidate materials and improved understanding of irradiation-induced microstructural changes in NFAs.

Environmental Molecular Sciences Laboratory↗

Modification of Ni-20Cr corrosion dealloying behavior in molten fluorides via cold work induced plastic deformation

The corrosion dealloying behavior of cold-worked (CW) Ni20Cr alloy (wt%) was studied in molten LiF-NaF-KF (or FLiNaK) salts at 600 °C, equal to a homologous temperature (TH) of 0.52. Alloys were cold-rolled to achieve reductions of thickness of 10%, 30%, and 50% introducing plastic deformation and a high density of dislocations. Potentiostatic holds (Eapplied) were applied in two different electrode potential regimes. At 1.75VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, Cr dealloying to Cr(II) and Cr(III) is predominant, while at 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, both Ni and Cr are oxidized in molten FLiNaK at 600 °C. In these potential regimes, dealloyed Ni20Cr displayed bicontinuous porosity within the grain interior and at grain boundaries, driven by the high driving force for Cr dissolution and sustained by defect mediated outward solid state diffusion of Cr in parallel with surface diffusion of Ni. The bicontinuous porous structure developed was observed to undergo further coarsening and densification of the Ni-rich ligaments at a higher electrode potential. The main effect of CW observed is the introduction of plastic deformation and dislocation substructures that serve as short-circuit paths for Cr solid state diffusion to surfaces exposed to FLiNaK. This modified the evolution of the bicontinuous porous structure which increased with CW substantially. Kinetic analysis reveals that the Cr dealloying at +1.75 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$ and 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$ is initially charge transfer controlled, except for the 50% CW condition at 1.90 VK+/K$${\text{V}}_{{\text{K}}^{+}/{\text{K}}}$$, where the process becomes limited by slow Cr defect mediated bulk diffusion. The rate determining factors are explored and compared to experimental results.

Chan, Ho Lun↗

Diffused phase transitions in Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} multiferroics

The solid solutions of (1−x)Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-xPb(Fe{sub 2/3}W{sub 1/3})O{sub 3} in different ratios were fabricated by a high-temperature solid-state reaction method using high-purity oxides for possible multi-ferroic applications. Structural analysis using x-ray diffraction powder patterns of the system by Rietveld refinement method exhibits the formation of rhombohedral phase with R3c space group. Detailed studies of dielectric permittivity as a function of temperature of the systems show that the frequency independent dielectric maximum temperature shifts toward room temperature on increasing x. In addition to this, the degree of diffuseness of the permittivity anomaly is more pronounced for higher content of Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}, implying the existence of a composition-induced diffuse phase transition for the limited range of compositional ratios. Detailed impedance spectroscopy analysis shows the contributions of grain, grain boundary, and interfacial polarizations in the resistive characteristics and conduction mechanism of the materials. The weak ferromagnetic and saturated ferroelectric loops indicate that system with x = 0.1, 0.2 have good multiferroic characteristics, and may be useful for future spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SrZrO 3 Formation at the Interlayer/Electrolyte Interface during (La 1-x Sr x ) 1-δ Co 1-y Fe y O 3 Cathode Sintering

This work probes the formation of SrZrO 3 at the SDC/YSZ interface (Sm doped ceria, SDC; Y stabilized zirconia, YSZ) during (La 1-x Sr x ) 1-δ Co1 -y Fe y O 3 (LSCF) cathode sintering. SEM/EDS and grazing incidence X-ray diffraction results of annealed LSCF and YSZ samples reveal that even without physical contact between LSCF and YSZ, SrZrO 3 was formed on the surface of YSZ, preferentially at the grain boundaries. It was suspected that the SrZrO 3 formation is due to the Sr-containing gas species diffused through the pores of the SDC layer and reacted with the YSZ electrolyte. Computational thermodynamics was adopted to predict the gas species formed in air during sintering by using the La-Sr-Co-Fe-O-H thermodynamic database. Sr(OH) 2 is identified as the dominant Sr-containing gas species under the experimental conditions. In addition, it was found that A-site deficiency in LSCF could effectively suppress the SrZrO 3 formation while a dense and pore-free SDC interlayer is required to totally block the SrZrO 3 formation. As a result, cell performance was significantly improved for a cell with a dense SDC interlayer fabricated by pulsed laser deposition, due to elimination of SrZrO 3 formation and therefore reduced interfacial resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Examination of Na-Doped Mo Sputtering for CIGS Devices (CRADA Final Report)

Na is an important ingredient in Cu(In,Ga)(Se,S) 2 (CIGS) photovoltaic devices, due to its ability to increase carrier density and passivate surfaces, grain boundaries, and Se vacancies. In the highest efficiency devices, Na is supplied to the growing CIGS film by diffusion through the Mo back contact from the sodalime glass substrate. This arrangement is problematic in that the Na content of the film is only indirectly controlled: deposition times, deposition temperatures, Mo morphology, and glass composition are coupled with the Na diffusion. Results in the literature show that the Mo, not the CIGS, is the primary barrier to Na diffusion. Alternatively, using a Na-free substrate or diffusion barrier, Na may be introduced by a NaF precursor deposited on top of the Mo. However, this forces a trade-off between carrier density and adhesion. If the NaF is not entirely consumed, the CIGS layer peels away from the Mo, encouraging the use of less NaF even though the best device properties tend to result from the thickest possible NaF layers. Furthermore, although early studies show that gross control of Na is sufficient to produce 12-14% small devices, the industry has reached this level and is ready to progress to higher performance. The sensitivity of NREL device efficiency (15 to 20%) to Mo morphology suggests that fine control of Na content is necessary for very high performance. This work has investigated the use of Na doped Mo (“MONA”) sputtering targets for use in preparing CIGS devices. The Mo:Na material is doped to about 3% Na by weight, implying that a 40 nm layer on top of the standard Mo contact validation of their product. contains sufficient Na to dope a 2.5 µm CIGS film. The ability to control Na doping independent of both CIGS processing conditions and adhesion is an important gain for industry and research. Manufacturers gain a route to increased manufacturability and performance, while NREL researchers gain a tightened performance distribution of devices and increased process flexibility. Our immediate partner in this work, the Climax Molybdenum Technology Center, gains validation of their product.

14 SOLAR ENERGY↗

Corrosion characteristics of Mo and TZM alloy for plasma facing components in molten lithium at 623 K

Here, in this study, the corrosion behaviours of molybdenum (Mo) and a Mo-based alloy (TZM) were investigated using a static immersion corrosion technique. Weight loss, surface microstructure, and corrosion depth of Mo and the TZM alloy were correlated with elements. The compatibility of Mo and the TZM alloy in static liquid Li was suitable. Mo demonstrated uniform corrosion with a homogenous dissolution of free C and Mo, and TZM alloy exhibited a nonuniform corrosion behaviour with a preferential grain boundary attack caused by the selective dissolution of free C, Ti, and Zr. When the surface oxidation layer of the samples was consumed, free C from Mo and TZM diffused into molten Li to form Li 2 C 2 and then was captured by Zr, Ti, and Mo to form thermodynamically stable carbides, which resulted in the enrichment of the C layer near the sample surfaces. In addition, Ti and Zr acted as N-trappers in liquid Li; the formation of Zr and Ti nitrides resulted in the enrichment of N, Ti, and Zr elements on the surface and led to TZM corrosion increase. Thus, Zr and Ti depletion, pitting, and grain boundary corrosion were problematic for TZM under long-term exposure to liquid Li. Reducing the content of free C and nonmetallic N and increasing the amount of Ti and Zr carbides on the surface of and inside the raw TZM alloy helped improve the corrosion resistance of TZM in liquid Li.

36 MATERIALS SCIENCE↗

Temperature and Excitation Dependence of Recombination in CIGS Thin Films with High Spatial Resolution

Alkali post-deposition treatments significantly improve the performance of CuInGaSe2 (CIGS) devices, but there is still room for improvement. Here, we investigate the effects of potassium fluoride alkali post-deposition treatment on the defect chemistry and recombination at grain boundaries and grain interiors using temperature- and injection-dependent cathodoluminescence (CL) spectrum imaging. We study CIGS thin films grown on alkali-free sapphire substrates to isolate the effects of alkali treatment from alkali metals that can diffuse from standard soda-lime glass substrates. We find that alkali treatment affects the energy and temperature dependence of the luminescence peaks, as well as the defect activation energies. CL spectrum images reveal that the luminescence transitions at grain boundaries have a distinct power dependence after alkali treatment and substantially different defect chemistry. This work shows that temperatureand injection-dependence CL spectrum images can provide unique insight into the defect chemistry and recombination behavior of CIGS thin films.

14 SOLAR ENERGY↗

Grain Boundary-Limited Thermal Transport in Suspended Thin Graphite across an Unexplored Thickness Regime

Here, we present systematic thermal conductivity (κ) measurements of suspended thin graphite ribbons, 234–527 nm thick, using a four-probe 3ω method. Unlike recent reports of phonon hydrodynamics and exceptionally high κ in micrometer-thick graphite ( Science, 2020), we observe significantly lower κ and no signatures of collective phonon flow in this intermediate thickness regime. Instead, our measured κ lies between few-layer graphene and bulk graphite. These results agree with a first-principles-informed Peierls–Boltzmann transport model with spatially resolved Monte Carlo sampling. Additionally, the temperature for the peak κ shifts lower with increasing thickness, due to the interplay of phonon-boundary and phonon-isotope scattering. Incorporating grain boundary scattering into simulations is necessary to replicate the experimental trends. These findings delineate the boundary between ballistic, hydrodynamic, and diffusive transport regimes in graphite and underscore the dominant role of disorder and geometry in phonon transport in quasi-two-dimensional materials, offering insights for nanoscale thermal management.

Boltzmann transport model↗

Cathodoluminescence for the 21st century: Learning more from light

Cathodoluminescence (CL) is the emission of light from a material in response to excitation by incident electrons. The technique has had significant impact in the characterization of semiconductors, minerals, ceramics, and many nanostructured materials. Since 2010, there have been a number of innovative developments that have revolutionized and expanded the information that can be gained from CL and broadened the areas of application. While the primary historical application of CL was for spatial mapping of luminescence variations (e.g., imaging dark line defects in semiconductor lasers or providing high resolution imaging of compositional variations in geological materials), new ways to collect and analyze the emitted light have expanded the science impact of CL, particularly at the intersection of materials science and nanotechnology. Current developments include (1) angular and polarized CL, (2) advances in time resolved CL, (3) far-field and near-field transport imaging that enable drift and diffusion information to be obtained through real space imaging, (4) increasing use of statistical analyses for the study of grain boundaries and interfaces, (5) 3D CL including tomography and combined work utilizing dual beam systems with CL, and (6) combined STEM/CL measurements that are reaching new levels of resolution and advancing single photon spectroscopy. This focused review will first summarize the fundamentals and then briefly describe the state-of-the-art in conventional CL imaging and spectroscopy. We also review these recent novel experimental approaches that enable added insight and information, providing a range of examples from nanophotonics, photovoltaics, plasmonics, and studies of individual defects and grain boundaries.

14 SOLAR ENERGY↗

Lithium metal stripping beneath the solid electrolyte interphase

Lithium stripping is a crucial process coupled with lithium deposition during the cycling of Li metal batteries. Lithium deposition has been widely studied, whereas stripping as a subsurface process has rarely been investigated. Here we reveal the fundamental mechanism of stripping on lithium by visualizing the interface between stripped lithium and the solid electrolyte interphase (SEI). We observed nanovoids formed between lithium and the SEI layer after stripping, which are attributed to the accumulation of lithium metal vacancies. High-rate dissolution of lithium causes vigorous growth and subsequent aggregation of voids, followed by the collapse of the SEI layer, i.e., pitting. We systematically measured the lithium polarization behavior during stripping and find that the lithium cation diffusion through the SEI layer is the rate-determining step. Nonuniform sites on typical lithium surfaces, such as grain boundaries and slip lines, greatly accelerated the local dissolution of lithium. As a result, the deeper understanding of this buried interface stripping process provides beneficial clues for future lithium anode and electrolyte design.

25 ENERGY STORAGE↗

Atom probe tomography study of internal interfaces in Cu{sub 2}ZnSnSe{sub 4} thin-films

We report on atom probe tomography studies of the composition at internal interfaces in Cu{sub 2}ZnSnSe{sub 4} thin-films. For Cu{sub 2}ZnSnSe{sub 4} precursors, which are deposited at 320 °C under Zn-rich conditions, grain boundaries are found to be enriched with Cu irrespective of whether Cu-poor or Cu-rich growth conditions are chosen. Cu{sub 2}ZnSnSe{sub 4} grains are found to be Cu-poor and excess Cu atoms are found to be accumulated at grain boundaries. In addition, nanometer-sized ZnSe grains are detected at or near grain boundaries. The compositions at grain boundaries show different trends after annealing at 500 °C. Grain boundaries in the annealed absorber films, which are free of impurities, are Cu-, Sn-, and Se-depleted and Zn-enriched. This is attributed to dissolution of ZnSe at the Cu-enriched grain boundaries during annealing. Furthermore, some of the grain boundaries of the absorbers are enriched with Na and K atoms, stemming from the soda-lime glass substrate. Such grain boundaries show no or only small changes in composition of the matrix elements. Na and K impurities are also partly segregated at some of the Cu{sub 2}ZnSnSe{sub 4}/ZnSe interfaces in the absorber, whereas for the precursors, only Na was detected at such phase boundaries possibly due to a higher diffusivity of Na compared to K. Possible effects of the detected compositional fluctuations on cell performance are discussed.

36 MATERIALS SCIENCE↗

Mitigation of Cu-Induced Grain Boundary Sensitization in Steel Wire Rods Through a Desensitization Heat Treatment

Steel wire rods are essential for manufacturing high-strength steel tire cords. Yet, the presence of residual copper (Cu) in recycled steel can cause grain-boundary sensitization, embrittlement, and deterioration of the mechanical performance of the final product. This study introduces a desensitization heat treatment step designed to redistribute Cu away from austenite grain boundaries after sensitization occurs. The treatment consists of a 10 min dwell at 1000 °C in a 5%H 2 -Ar reducing atmosphere followed by quench. The temperature and hold time were selected based on diffusion calculations to promote solid-state back diffusion of Cu without altering grain morphology. Experimental validation showed that the dwell step reduced the length of Cu-rich sensitized zones of steel wire rod samples containing 0.21 wt.% Cu by approximately 89% and restored the mechanical properties to nearly 95–98% relative to low-Cu baseline steel (0.01 wt.% Cu). Compared with sensitized and as-obtained samples, these results highlight the effectiveness of the proposed method in improving both the microstructure and tensile performance of recycled steel wire rods, enabling their potential application in tire manufacturing.

copper↗

Investigation of the structure and chemical nature of Pd fission product agglomerations in irradiated TRISO particle SiC

Tristructural-isotropic (TRISO)-coated fuel particles are used in high-temperature gas-cooled nuclear reactors. Although the polycrystalline 3C-SiC layer acts as the main barrier to fission product release, post-irradiation examinations have shown that certain metallic fission products are found outside of the TRISO coated particle, with no observable micro-cracks or other mechanical failure feature. In this study, an atomic resolution transmission electron microscopy investigation of a SiC layer of a neutron irradiated (19.38% fissions per initial metal atom average burnup; 1072°C time-averaged temperature) TRISO-coated particle from the first advanced gas reactor experiment at Idaho National Laboratory containing mainly Pd and U was conducted. The fission product Pd was found to be present at dislocation cores associated with twins, stacking faults, and their intersections. The Pd present at the dislocation cores were bonded to Si, suggesting that the diffusion of Pd along the SiC dislocation cores involves the formation of Pd-Si bonds. Evidence of single atom grain boundary migration was also found. Fission product agglomerations at grain boundaries most likely consist of a random solid solution containing Si-FP, Si-C, and C-C type bonding arrangements. No difference in the Si- or C-bonding environment is found for the unoccupied grain boundary adjacent to a fission product agglomeration compared to the bulk SiC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Helium segregation and transport behavior near $\langle$100$\rangle$ and $\langle$110$\rangle$ symmetric tilt grain boundaries in tungsten

This work reports on the results of a systematic atomistic modeling study of small helium cluster behavior near tungsten symmetric tilt grain boundaries. This behavior was viewed qualitatively by molecular dynamics simulations and quantitatively by molecular statics simulations combined with elastic inclusion theory. The sink strength is used to describe the magnitude of the clusters' attraction to the grain boundary. We find that small helium clusters show impeded transport behavior relative to the bulk around all types of grain boundaries, including low-angle, high-angle, low-Sigma-value, and high-Sigma-value grain boundaries. Helium clusters tend to become trapped near, but usually not directly on, the grain boundary plane. Both the distance between the helium cluster and the grain boundary when the cluster first becomes immobilized and the sink strength are correlated with helium cluster size, grain boundary formation energy, grain boundary tilt angle, excess volume, and other aspects of grain boundary structure. We anticipate similar impeded transport behavior for other types of grain boundaries and in other metals, because helium is effectively insoluble in most materials and has a similar interstitial-based diffusion mechanism in most metals.

36 MATERIALS SCIENCE↗