Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Magnetoelectric polymer nanocomposite for flexible electronics

This paper reports the fabrication and characterization of a new type of magnetoelectric polymer nanocomposite that exhibits excellent ferromagnetism and ferroelectricity simultaneously at room temperature. The multiferroic nanocomposite consists of high aspect ratio ferromagnetic iron nanowires embedded inside a ferroelectric co-polymer poly(vinylindene fluoride-trifluoroethylene), P(VDF-TrFE). The nanocomposite has been fabricated via a simple low temperature spin coating technique. Structural, ferromagnetic, ferroelectric, and magnetoelectric properties of the developed nanocomposite have been characterized. The nanocomposite films showed isotropic magnetic properties due to the random orientation of the iron nanowires inside the film. In addition, the embedded nanowires did not hinder the ferroelectric phase development of the nanocomposite. The developed nanocomposite showed a high magnetoelectric coupling response of 156 mV/cmOe measured at 3.1 kOe DC bias field. This value is among the highest reported magnetoelectric coupling in two phase particulate polymer nanocomposites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Switchable orbital polarization and magnetization in strained LaCo O 3 films

Strain engineering of epitaxial heterostructures offers opportunities to control the orbital degree of freedom by lifting the degeneracy of e g states. In this work, we show that the orbital occupation in LaCoO 3 (LCO) films can be switched between two degenerate e g bands with epitaxial strain. The orbital polarization of nearly -100% (or 100%) is controlled by depleting occupation of the d x2-y2 (or d( 3z2-r2 ) orbital entirely in LCO for large compressive (or moderate tensile) strain. The change of electronic configuration associated with the spin-state transition modulates the magnetization of strained LCO films. Under compressive strain, LCO films exhibit a small magnetization without long-range ferromagnetic ordering. With tensile-strain increases, the magnetization of LCO films increases and reaches the maximum value when the bonding angle (Co-O-Co) is close to 180° and the in-plane bond length (Co-O) is unstretched. Our results highlight the role of octahedral distortion and spin-state crossover in tailoring the magnetic properties of cobaltite thin films, indicating an attractive route to deliberately control the orbital polarization that can be tuned to maximize the functionality of oxide heterostructures.

36 MATERIALS SCIENCE↗

Structural, magnetic and phonon properties of Cr(III)-doped perovskite metal formate framework [(CH{sub 3}){sub 2}NH{sub 2}][Mn(HCOO){sub 3}]

We have incorporated Cr(III) into [(CH{sub 3}){sub 2}NH{sub 2}][Mn(HCOO){sub 3}] (DMMn) multiferroic metal organic framework (MOF). The highest concentration of Cr(III) in the synthesized samples reached 15.9 mol%. The obtained samples were characterized by powder and single-crystal X-ray diffraction, DSC, magnetic susceptibility, dielectric, EPR, Raman and IR methods. These methods and the performed chemical analysis revealed that electrical charge neutrality after substitution of Cr(III) for Mn(II) is maintained by partial replacement of dimethylammonium (DMA{sup +}) cations by neutral HCOOH molecules. These changes in the chemical composition are responsible for weakening of the hydrogen bonds and decreased flexibility of the framework. This in turn leads to lowering of the ferroelectric phase transition temperature, observed around 185 K for undoped DMMn and around 155 K for the sample containing 3.1 mol% of Cr(III), and lack of macroscopic phase transition for the samples with Cr(III) content of 8.2 and 15.9 mol %. Another interesting effect observed for the studied samples is pronounced strengthening of the weak ferromagnetism of in Cr(III)-doped samples, associated with slight decrease of the ferromagnetic ordering temperature from 8.5 K for DMMn to 7.0 K for the sample with 15.9 mol % Cr(III) content. - Graphical abstract: Incorporation of Cr(III) into [(CH3)2NH2[Mn(HCOO)3] framework increases the magnetization. - Highlights: • Chromium(III) substitutes for Mn(II) in the studied MOF. • Charge neutrality is maintained by replacing DMA{sup +} cations by neutral HCOOH molecules. • Compounds with 8.2 and 15.9% of Cr(III) show no phase transition above 100 K. • Doping with Cr(III) increases magnetization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Fe Doping and Point Defects (V{sub O} and V{sub Sn}) on the Magnetic Properties of SnO{sub 2}

We investigated the effects of Fe doping and point defects (oxygen and tin vacancies, V{sub O} and V{sub Sn}, respectively) on the ferromagnetism of SnO{sub 2} through first-principles calculations by using generalized gradient approximation + U under density functional theory. Calculation results show that Fe-doped SnO{sub 2} with V{sub O} or V{sub Sn} exhibit long-range ordered ferromagnetism and Curie temperature above room temperature. The system has different magnetic properties with different doping modes, which are beneficial to the magnetic adjustment of dilute magnetic semiconductor (DMS). The double-exchange effects among the electrons of O–2p and Fe–3d states are the origin of ferromagnetism in Sn{sub 15}FeO{sub 31}. Similarly, ferromagnetism in Sn{sub 14}FeO{sub 32} is derived from the double-exchange effects among the electrons of O–2p and Fe–3d states. These effects are produced by hole carriers after complexes form by Fe doping and V{sub O} or V{sub Sn}. Simultaneously, Sn{sub 14}FeO{sub 32} shows a half-metallic behavior, thus resulting in 100% conduction hole polarizability, which is highly beneficial to DMSs as a hole-injection source. Moreover, results also show that the decreased distance between Fe and vacancies (V{sub O} or V{sub Sn}) lowers formation energy and thus increases the system stability.

36 MATERIALS SCIENCE↗

Surface spins enhanced magnetoelectric coefficient and impedance spectroscopy of BaFe{sub 0.01}Ti{sub 0.99}O{sub 3} and BaFe{sub 0.015}Ti{sub 0.985}O{sub 3} nanorods

Highlights: • Multiferroic Fe-doped BaTiO{sub 3} nanorods. • Sol–gel. • Magnetoelectric coefficient. • Transmission electron microscopy. • Cole–Cole plots. - Abstract: Multiferroic BaFe{sub 0.01}Ti{sub 0.99}O{sub 3} (BFT1) and BaFe{sub 0.015}Ti{sub 0.985}O{sub 3} (BFT15) nanorods were prepared by a sol–gel synthesis and annealed at 700 °C/2 h. The tetragonal phase and nano dimensions of BFT samples are identified by X-ray diffraction and transmission electron microscopy. The enhancement in ferroelectricity depends upon low porosity, tetragonal phase, space charge field, larger surface area and oriented growth. The ferromagnetism depends upon partially filled inner shells, surface spins and oxygen vacancies. The magnetoelectric coefficient is explained on the basis of surface spins, short-range interactions near surface boundary, compressive stress and twin structure contributed by nano grains which can reside stress near grain boundaries. The frequency dependent real (Z′) and imaginary (Z″) parts of impedance spectra are confirmed by the variations that observed in dielectric properties. The values of resistance of grain boundaries, R{sub gb} is higher than grains, R{sub g} indicating that the effect of grain boundaries is dominant in BFT nanorods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferromagnetism and topological surface states of manganese doped Bi{sub 2}Te{sub 3}: Insights from density-functional calculations

Based on first-principles calculations, the electronic, magnetic, and topological characters of manganese (Mn) doped topological insulator Bi{sub 2}Te{sub 3} were investigated. The Mn substitutionally doped Bi{sub 2}Te{sub 3}, where Mn atoms tend to be uniformly distributed, was shown to be p-type ferromagnetic, arising from hole-mediated Ruderman-Kittel-Kasuya-Yosida interaction. Mn doping leads to an intrinsic band splitting at Γ point, which is substantially different from that of nonmagnetic dopant. The topological surface state of Bi{sub 2}Te{sub 3} is indeed gapped by Mn doping; however, the bulk conductance limits the appearance of an insulating state. Moreover, the n-type doping behavior of Bi{sub 2}Te{sub 3} is derived from Mn entering into the van der Waals gap of Bi{sub 2}Te{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, Optical, Magnetic, and Dielectric Properties of Cr{sup 3+} Substituted Cobalt Aluminate Nanoparticles

The present study investigates the influence of Cr{sup 3+} substitution on structural, optical, dielectric, and magnetic properties of cobalt aluminates in the aluminates series CoAl{sub 2-x}Cr{sub x}O{sub 4}, 0.00 ≤ x ≤ 0.20. These series of nanoparticles are effectively synthesized using the co-precipitation method. The cubic spinel aluminate structure is confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic measurements. Transmission electron microscopy (TEM) analysis shows the formation of spherical nanoparticles, which are homogeneous in shape and size. The optical properties of the prepared samples have been investigated by means of optical absorbance spectra. The optical band gap E{sub opt}{sup i} and Urbach energy E{sub u} are estimated. At room temperature, the magnetization of undoped CoAl{sub 2}O{sub 4} reveals a weak ferromagnetic behavior. This ferromagnetism is increased for the sample with x = 0.05, and the samples with higher Cr{sup 3+} content have a tendency to be superparamagnetic on account of the formation of single-domain particles as a consequence of small particle size. Real part of dielectric constant (ε{sup ′}), dielectric loss (tanδ), ac conductivity (σ{sub ac}), real part of impedance (Z{sup ′}), and imaginary part of impedance (Z{sup ″}) are analyzed as a function of frequency and Cr{sup 3+} content. The results show that the dielectric loss (tanδ), dielectric permittivity (ε{sup ′}), and ac conductivity (σ{sub ac}) decrease with the increase in Cr{sup 3+} content, x = 0.05, and then increase with a further increase in Cr{sup 3+} content. The increase in these parameters has been explained on the basis of the hopping mechanism. From the Cole–Cole diagram, the value of the relaxation time τ can be calculated and it has been found to increase with increasing the Cr{sup 3+} content. Actually, a high dielectric constant makes these materials good for energy storage at high frequencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electric-field-controlled interface strain coupling and non-volatile resistance switching of La{sub 1-x}Ba{sub x}MnO₃ thin films epitaxially grown on relaxor-based ferroelectric single crystals

We have fabricated magnetoelectric heterostructures by growing ferromagnetic La{sub 1-x}Ba{sub x}MnO₃ (x=0.2, 0.4) thin films on (001)-, (110)-, and (111)-oriented 0.31Pb(In{sub 1/2}Nb{sub 1/2})O₃-0.35Pb(Mg{sub 1/3}Nb{sub 1/2})O₃-0.34PbTiO₃ (PINT) ferroelectric single-crystal substrates. Upon poling along the [001], [110], or [111] crystal direction, the electric-field-induced non-180° domain switching gives rise to a decrease in the resistance and an enhancement of the metal-to-insulator transition temperature T C of the films. By taking advantage of the 180° ferroelectric domain switching, we identify that such changes in the resistance and T C are caused by domain switching-induced strain but not domain switching-induced accumulation or depletion of charge carriers at the interface. Further, we found that the domain switching-induced strain effects can be efficiently controlled by a magnetic field, mediated by the electronic phase separation. Moreover, we determined the evolution of the strength of the electronic phase separation against temperature and magnetic field by recording the strain-tunability of the resistance [(ΔR/R){sub strain}] under magnetic fields. Additionally, opposing effects of domain switching-induced strain on ferromagnetism above and below 197 K for the La₀.₈Ba₀.₂MnO₃ film and 150 K for the La₀.₆Ba₀.₄MnO₃ film, respectively, were observed and explained by the magnetoelastic effect through adjusting the magnetic anisotropy. Finally, using the reversible ferroelastic domain switching of the PINT, we realized non-volatile resistance switching of the films at room temperature, implying potential applications of the magnetoelectric heterostructure in non-volatile memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent structure of Tb-doped magnetite nanoparticles

High quality 5 nm cubic Tb-doped magnetite nanoparticles have been synthesized by a wet-chemical method to investigate tailoring of magnetic properties for imaging and biomedical applications. We show that the Tb is incorporated into the octahedral 3+ sites. High-angle annular dark-field microscopy shows that the dopant is well-distributed throughout the particle, and x-ray diffraction measurements show a small lattice parameter shift with the inclusion of a rare-earth dopant. Magnetization and x-ray magnetic circular dichroism data indicate that the Tb spins are unpolarized and weakly coupled to the iron spin lattice at room temperature, and begin to polarize and couple to the iron oxide lattice at temperatures below 50 K. Broadband ferromagnetic resonance measurements show no increase in magnetic damping at room temperature for Tb-doped nanoparticles relative to undoped nanoparticles, further confirming weak coupling between Fe and Tb spins at room temperature. The Gilbert damping constant, α, is remarkably low for the Tb-doped nanoparticles, with α = 0.024 ± 0.003. These nanoparticles, which have a large fixed moment, a large fluctuating moment and optically active rare-earth elements, are potential high-relaxivity T1 and T2 MRI agents with integrated optical signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Signature of Ferromagnetic Phase at Low Temperature in Low-Doped La{sub 0.88}Ca{sub 0.12}MnO{sub 3} Single Crystal

The confirmation of ferromagnetism at low temperature in a low-doped manganites system is always debatable. It is for the first time, electrical, magnetic, and thermal properties have been measured for manganites single crystal of La{sub 0.88}Ca{sub 0.12}MnO{sub 3} by using a floating-zone method. The electrical resistivity shows a perceptible change of resistance at a low temperature which can be viewed as a signature of the ferromagnetic phase. The ferromagnetic phase of the investigated La{sub 0.88}Ca{sub 0.12}MnO{sub 3} single crystal with Curie temperature of T{sub C} = 120 K which is in closed agreement with ac-susceptibility measurement. An analysis of the specific heat suggests the transition peak (T{sub P}) coincides with the T{sub C} and attains 1.2 J mol{sup −1} K at 116 K. The magnetoresistance (MR) and temperature coefficient of resistance (TCR) were found to be 69% and 10% respectively, which expands its subtle potential for applications in spintronics and thermistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and dielectric properties of Aurivillius phase Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4)

We investigate the structural, magnetic, and dielectric properties of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4). The room-temperature ferromagnetism is observed in the Nb and Co co-doped samples compared with the paramagnetic behavior in Bi{sub 6}Fe{sub 2}Ti{sub 3}O{sub 18}. The ferromagnetism in Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} can be understood in terms of spin canting of the antiferromagnetic coupling of the Fe-based and Co-based sublattices via Dzyaloshinsky-Moriya interaction. Moreover, doping Co at Ti sites can significantly enhance the ferromagnetic Curie temperature compared with the substitution of Co for Fe in the Aurivillius compounds. The dielectric loss of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0.1 ≤ x ≤ 0.4) exhibits a relaxation process. The rather large activation energy in the 0.1 ≤ x ≤ 0.3 samples implies that the relaxation process is not due to the thermal motion of oxygen vacancies inside ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic modification at sub-surface of FeRh bulk by energetic ion beam irradiation

Ferromagnetic layered structure has been made at sub-surface of the antiferromagnetic FeRh bulk samples by high energy He ion beam irradiation. In accordance with the Transport of Ions in Matter simulation, such ion beam can effectively deposit the elastic collision energy in several μm regions in the depth from the surface. Measurement with a superconducting quantum interference device reveals the irradiated samples to be ferromagnetic. Assuming that only the part the energy deposited can be modified to be ferromagnetic, the corresponding irradiation induced magnetization is consistent with the data that we previously reported. On the other hand, the X-ray magnetic circular dichroism (XMCD) spectra for the irradiated samples are totally unchanged as those for the unirradiated samples. Since XMCD signal in total emission yield method is considered to be surface sensitive with a typical probing depth of several nm, the surface magnetic state is maintained to be antiferromagnetic. By utilizing these phenomena, three-dimensional magnetic patterning of FeRh can be realized, which may potentially be used for future magnetic exchange device application such as nano-scale sensors and memories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface-induced superconductivity in magnetic topological insulators

The interface between two different materials can show unexpected quantum phenomena. Here, in this study, we used molecular beam epitaxy to synthesize heterostructures formed by stacking together two magnetic materials, a ferromagnetic topological insulator (TI) and an antiferromagnetic iron chalcogenide (FeTe). We observed emergent interface-induced superconductivity in these heterostructures and demonstrated the co-occurrence of superconductivity, ferromagnetism, and topological band structure in the magnetic TI layer—the three essential ingredients of chiral topological superconductivity (TSC). The unusual coexistence of ferromagnetism and superconductivity is accompanied by a high upper critical magnetic field that exceeds the Pauli paramagnetic limit for conventional superconductors at low temperatures. These magnetic TI/FeTe heterostructures with robust superconductivity and atomically sharp interfaces provide an ideal wafer-scale platform for the exploration of chiral TSC and Majorana physics.

36 MATERIALS SCIENCE↗

Modulating above-room-temperature magnetism in Ga-implanted Fe 5 GeTe 2 van der Waals magnets

The creation of van der Waals (vdW) ferromagnets with tunable Curie temperature (T C ) and magnetic anisotropy is essential in developing vdW magnet-based devices. Here, we report an effective and reliable method for modulating the magnetic properties of vdW Fe 5 GeTe 2 by site-specific Ga + implantation. In this study, we report an easy axis in the ab-plane for bulk Fe 5 GeTe 2 (T C = 310 K) and an axis out of the plane for thin Fe 5 GeTe 2 flakes (T C = 290 K). Combining element-resolved photoemission electron microscopy and spatially resolved magneto-optic Kerr microscopy, we find that the implantation of a tiny amount of 10 –3 Ga + ·Å –3 in Fe 5 GeTe 2 greatly enhances the T C from 290 to 360 K and switches the magnetic easy axis from the out-of-plane c axis to the ab-plane. The room-temperature x-ray magnetic circular dichroism signal is enhanced from 0% to 9% at an implantation level of 10 –2 Ga + ·Å –3 . These results provide new opportunities for tailoring the magnetic properties of vdW materials beyond room temperature.

36 MATERIALS SCIENCE↗

Two-current model of the composition dependence of resistivity in amorphous (Fe100-xCox)(89-y)Zr7B4Cuy alloys using a rigid-band assumption

Composition dependence of resistivity is studied in amorphous (Fe100-xCox)(89-y)Zr7B4Cuy (0 <= x <= 50, y = 0, 1) alloys. The two-current model proposed by Mott for crystalline materials is extended to a disordered amorphous system where s-d scattering is dominant in electron conduction. A rigid-band assumption is made due to the small atomic number difference between Fe and Co. Band structures with a constant density of states (DOS), parabolic distributed DOS, and Gaussian distributed DOS were investigated to fit experimental data. The Gaussian distributed DOS was found to simulate the resistivity maximum and magnetic moment maximum in the Fe-rich region. The basic concepts presented here can potentially provide insight into the optimization of FeCo-based HITPERM alloys for applications at increased frequencies. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4765673]

Shen, S↗

Magnetic, dielectric, and magneto-dielectric properties of rare-earth-substituted Aurivillius phase Bi₆Fe₁.₄Co₀.₆Ti₃O₁₈

We investigate the magnetic, dielectric, and magnetodielectric properties of rare-earth-substituted Aurivillius phase Bi₆Fe₁.₄Co₀.₆Ti₃O₁₈. The room-temperature ferromagnetic behavior is observed in all samples, and the rare-earth-substituted samples exhibit an enhanced magnetization. The weak ferromagnetism can be ascribed to the spin canting of the antiferromagnetic coupling of the Fe-based and Co-based sublattices via Dzyaloshinsky-Moriya interaction. The dielectric loss of all samples exhibits two dielectric relaxation peaks corresponding to two different relaxation mechanisms. One relaxation process with E{sub a}=0.5 eV is related to the hoping process of oxygen vacancies and the other one with E{sub a}=1.6 eV can be ascribed to the intrinsic conduction. The Gd-doped sample exhibits a remarkable magnetodielectric effect (9.4%) at RT implying this Aurivillius phase may be the potential candidate for magnetodielectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic response of 17-4 stainless steel as a function of manufacturing method and heat treatment

We present a series of plate-impact experiments on 17-4 stainless steel to study the effect of manufacturing method and heat treatment on the Hugoniot elastic limit (HEL), Hugoniot, phase transformation stress, and spallation strength. Two traditional manufacturing methods were considered, wrought processing and casting, as well as two additive manufacturing methods, laser powder-bed fusion (LPBF) and wire-fed electron beam (EBAM). For both LPBF and EBAM 17-4 stainless steel variants, two billets were printed, enabling the application of two unique heat treatments. The HEL stress depended heavily on the thermal history, with the HEL increasing after the formation of Cu-rich precipitates via heat treatment. The Hugoniot response both below and above the phase transition was unaffected by the manufacturing method or heat treatment. The phase transition stress depended heavily on the thermal history, with its variation being attributed to the presence of various microstructural features. This is supported by a marked increase in the phase transition stress after precipitation hardening. These results suggest that the notion of the phase transition stress being dictated by bulk composition is an oversimplification and the stress fields generated by the meso-scale structure are a dominant force. The spallation strength was lower in the cast material compared to all other 17-4 stainless steel variants due to the presence of brittle δ-ferrite inclusions. Additionally, a drop in the tensile strain-rate was observed in the spallation response above the phase transition stress, which was hypothesized to stem from the kinetics of the reversion to the low-pressure phase during spall.

Compressive stress↗

Magnetic anisotropy induced by crystal distortion in Ge{sub 1−x}Mn{sub x}Te/PbTe//KCl (001) ferromagnetic semiconductor layers

Ferromagnetic resonance (FMR) study of magnetic anisotropy is presented for thin layers of IV-VI diluted magnetic semiconductor Ge{sub 1−x}Mn{sub x}Te with x = 0.14 grown by molecular beam epitaxy on KCl (001) substrate with a thin PbTe buffer. Analysis of the angular dependence of the FMR resonant field reveals that an easy magnetization axis is located near to the normal to the layer plane and is controlled by two crystal distortions present in these rhombohedral Ge{sub 1−x}Mn{sub x}Te layers: the ferroelectric distortion with the relative shift of cation and anion sub-lattices along the [111] crystal direction and the biaxial in-plane, compressive strain due to thermal mismatch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗