Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

'Bottleneck' calculation of ion-electron recombination coefficients for lithium-like ions

The ion-electron recombination coefficients for the lithium-like ions C IV, O VI, Ne VIII, Si XII and Ar XVI are computed by the bottleneck method of Byron et al. (1962). In this method, the minimum rate of transitions down the ladder of energy level is taken as the limiting recombination rate, and the particular energy level corresponding to the minimum transition rate is found. The partial collisional radiative recombination coefficient is obtained in terms of the equilibrium population, the rate of collisional de-excitation, the mean radiative transition probability from the bottleneck level and the total transition probability from a level above the bottleneck level to all levels below it. The full collisional-radiative recombination is then obtained by the addition of the values of the radiative recombination coefficient and the three-body recombination coefficient to the ground level. Results of the calculation are shown to be in good agreement with those of Drawin and Emard (1975) for the case of hydrogen. It is also noted that the process of dielectronic recombination, which is not accounted for here, may be significant at lower densities.

Kastner, S. O.↗

Fe i Oscillator Strengths for Transitions from High-lying Odd-parity Levels

We report new experimental Fe i oscillator strengths obtained by combining measurements of branching fractions measured with a Fourier Transform spectrometer and time-resolved, laser-induced fluorescence lifetimes. This study covers the spectral region ranging from 213 to 1033 nm. A total of 120 experimental log(gf)-values coming from 15 odd-parity energy levels are provided, 22 of which have not been reported previously and 63 of which have values with lower uncertainty than the existing data. The radiative lifetimes for 60 upper energy levels are presented, 39 of which have no previous measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ruthenium-europium configuration in the Eu{sub 2}Ru{sub 2}O{sub 7} pyrochlore

The magnetic and electronic properties of Eu{sub 2}Ru{sub 2}O{sub 7} are discussed in terms of the local ruthenium and europium coordination, electronic band structure calculations, and molecular orbital energy levels. A preliminary electronic structure was calculated within the local density approximation (LDA) and local spin density approximation taking in to account on-site Hubbard U (LSDA + U). The molecular orbital energy level diagrams have been used to interpret the Eu-Ru ligand spectrum and the ensuing magnetic properties. The orbital hybridizations and bonds are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybrid power source

A hybrid power system is comprised of a high energy density element such as a fuel-cell and high power density elements such as a supercapacitor banks. A DC/DC converter electrically connected to the fuel cell and converting the energy level of the energy supplied by the fuel cell. A first switch is electrically connected to the DC/DC converter. First and second supercapacitors are electrically connected to the first switch and a second switch. A controller is connected to the first switch and the second switch, monitoring charge levels of the supercapacitors and controls the switching in response to the charge levels. A load is electrically connected to the second switch. The first switch connects the DC/DC converter to the first supercapacitor when the second switch connects the second supercapacitor to the load. The first switch connects the DC/DC converter to the second supercapacitor when the second switch connects the first supercapacitor to the load.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An experimental and theoretical study of the electronic spectrum of the HBCl free radical

Following our previous discovery of the spectra of the HBX (X = F, Cl, and Br) free radicals [S.-G. He, F. X. Sunahori, and D. J. Clouthier, J. Am. Chem. Soc. 127, 10814 (2005)], the A{sup ~2}A{sup ″}Π−X{sup ~2}A{sup ′} band systems of the HBCl and DBCl free radicals have been studied in detail. The radicals have been prepared in a pulsed electric discharge jet using a precursor mixture of BCl{sub 3} and H{sub 2} or D{sub 2} in high pressure argon. Laser-induced fluorescence (LIF) and single vibronic level emission spectra have been recorded to map out the ground and excited state vibrational energy levels. The band system involves a linear-bent transition between the two Renner-Teller components of what would be a {sup 2}Π electronic state at linearity. We have used high level ab initio theory to calculate the ground and excited state potential energy surfaces and have determined the vibronic energy levels variationally. The theory results were used to assign the LIF spectra which involve transitions from the ground state zero-point level to high vibrational levels of the excited state. The correspondence between theory and experiment, including the transition frequencies, upper state band symmetries, and H, B, and Cl isotope shifts, was used to validate the assignments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of atomic constants for optical radiation, volume 2

Various atomic constant for 23 elements from helium to mercury were computed and are presented in tables. The data given for each element start with the element name, its atomic number, its ionic state, and the designation and series limit for each parent configuration. This is followed by information on the energy level, parent configuration, and designation for each term available to the program. The matrix elements subtables are ordered by the sequence numbers, which represent the initial and final levels of the transitions. Each subtable gives the following: configuration of the core or parent, designation and energy level for the reference state, effective principal quantum number, energy of the series limit, value of the matrix element for the reference state interacting with itself, and sum of all of the dipole matrix elements listed in the subtable. Dipole and quadrupole interaction data are also given.

Kylstra, C. D.↗

Large-scale calculations of atomic level and transition properties in the aluminum isoelectronic sequence from Ti X through Kr XXIV, Xe XLII, and W LXII

Large-scale self-consistent multiconfiguration Dirac–Hartree–Fock subsequent relativistic configuration interaction (RCI) calculations are reported for 360 states belonging to the 30 configurations 3s{sup 2}{3l,4l,5l}, 3p{sup 2}{3d,4l}, 3s{3p"2,3d"2}, 3s{3p3d,3p4l,3p5s,3d4l"′}, 3p3d{sup 2}, 3p{sup 3} and 3d{sup 3} with l=0,1,…,n−1 and l{sup ′}=0,1,2 in 17 systems of the aluminum-like isoelectronic sequence: Ti X through Kr XXIV, Xe XLII, and W LXII. Effects from electron correlation are taken into account by means of large expansions in terms of a basis of configuration state functions (CSF) and calculated energy levels are compared with existing theoretical calculations and the NIST Atomic Spectra database. Radiative E1, E2, M1 and M2 transition rates and associated lifetimes of energy levels are presented in online tables. The uncertainties of the calculated energies are very small, on average between 0.02% and 0.05%, which aid new line identifications in laboratory and astronomical spectra and also make it possible to find and rule out misidentifications. The uncertainties of the E1 transition probabilities, based on the agreement between values in the length and velocity gauges, are estimated to be of the order 0.5% for the strong transitions and 25% for the weaker intercombination transitions. The M1 transition values are not sensitive to electron correlation and are believed to be accurate to well within 1%.

74 ATOMIC AND MOLECULAR PHYSICS↗

The 3-dimensional cored and logarithm potentials: Periodic orbits

We study analytically families of periodic orbits for the cored and logarithmic Hamiltonians with 3 degrees of freedom, which are relevant in the analysis of the galactic dynamics. First, after introducing a scale transformation in the coordinates and momenta with a parameter ε, we show that both systems give essentially the same set of equations of motion up to first order in ε. Then the conditions for finding families of periodic orbits, using the averaging theory up to first order in ε, apply equally to both systems in every energy level H = h > 0 showing the existence of at least 3 periodic orbits, for ε small enough, and also provides an analytic approximation for the initial conditions of these periodic orbits. We prove that at every positive energy level the cored and logarithmic Hamiltonians with 3 degrees of freedom have at least three periodic solutions. The technique used for proving such a result can be applied to other Hamiltonian systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An asymptotic expansion for energy eigenvalues of anharmonic oscillators

In the present contribution, we derive an asymptotic expansion for the energy eigenvalues of anharmonic oscillators for potentials of the form V(x)=κx{sup 2q}+ωx{sup 2},q=2,3,… as the energy level n approaches infinity. The asymptotic expansion is obtained using the WKB theory and series reversion. Furthermore, we construct an algorithm for computing the coefficients of the asymptotic expansion for quartic anharmonic oscillators, leading to an efficient and accurate computation of the energy values for n≥6. -- Highlights: •We derived the asymptotic expansion for energy eigenvalues of anharmonic oscillators. •A highly efficient recursive algorithm for computing S{sub k}{sup ′}(z) for WKB. •We contributed to series reversion theory by reverting a new form of asymptotic series. •Our numerical algorithm achieves high accuracy for higher energy levels.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

HYPERFINE STRUCTURE CONSTANTS OF ENERGETICALLY HIGH-LYING LEVELS OF ODD PARITY OF ATOMIC VANADIUM

High-resolution Fourier transform spectra of a vanadium-argon plasma have been recorded in the wavelength range of 365-670 nm (15,000-27,400 cm{sup –1}). Optical bandpass filters were used in the experimental setup to enhance the sensitivity of the Fourier transform spectrometer. In total, 138 atomic vanadium spectral lines showing resolved or partially resolved hyperfine structure have been analyzed to determine the magnetic dipole hyperfine structure constants A of the involved energy levels. One of the investigated lines has not been previously classified. As a result, the magnetic dipole hyperfine structure constants A for 90 energy levels are presented: 35 of them belong to the configuration 3d {sup 3}4s4p and 55 to the configuration 3d {sup 4}4p. Of these 90 constants, 67 have been determined for the first time, with 23 corresponding to the configuration 3d {sup 3}4s4p and 44 to 3d {sup 4}4p.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analysis of characteristics of a diode-pumped rubidium vapour laser using a kinetic algorithm

We consider diode-pumped alkali vapour lasers (DPALs), which make it possible to achieve a high output power. Characteristics of such DPALs strongly depend on the physical properties of buffer gases and on structural parameters of a vapour cell. Special attention is paid to a diode-pumped rubidium vapour laser (DPRVL): We have investigated the effect of different conditions on its characteristics. The results show that the linewidth of the D{sub 2} line of a DPRVL and the fine-structure mixing rate between two excited energy levels, which are two crucial factors in implementing a high-power DPRVL, increase with the pressure of buffer gases and the temperature of the vapour cell. It is demonstrated that the population ratio of two excited energy levels is close to that corresponding to a thermal equilibrium as the pressure of buffer gases and the temperature of the vapour cell become higher. We have found that the optimal values of the methane pressure, the cell temperature and the cell length can be determined through a kinetic analysis. The conclusions can be valuable for designing configurations of an end-pumped DPAL. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search for critical-point nuclei in terms of the sextic oscillator

The spherical to deformed gamma-unstable shape transition in nuclei is discussed in terms of the sextic oscillator as a gamma-independent potential in the Bohr Hamiltonian. The wave functions, energy eigenvalues, and electric quadrupole and monopole transition rates are calculated in closed analytical form for the lowest-lying energy levels. It is shown that the locus of critical points for the spherical to deformed gamma-unstable shape phase transition corresponds to a parabola in the parameter space of the model. The ratios of energy eigenvalues and electromagnetic transition probabilities are constant along this parabola. It is thus possible to associate parameter-free benchmark values to the ratios of relevant observables at the critical point of the transition that can be compared to experimental data. In addition, systematic studies of the shape evolution in isotope chains can be performed within the model. As an application, the model parameters are fitted to the energy spectra of the chains of even-even Ru, Pd, and Cd isotopes and the electric quadrupole transition probabilities are calculated. It is found that {sup 104}Ru, {sup 102}Pd, and {sup 106,108}Cd nuclei, which are usually considered to be good candidates for the E(5) symmetry, lie rather close to the critical parabola that separates the spherical and deformed gamma-unstable domains. The isotope {sup 116}Cd is proposed as a new candidate for a similar critical-point nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

AN INTERFEROMETRIC SPECTRAL-LINE SURVEY OF IRC+10216 IN THE 345 GHz BAND

We report a spectral-line survey of the extreme carbon star IRC+10216 carried out between 293.9 and 354.8 GHz with the Submillimeter Array. A total of 442 lines were detected, more than 200 for the first time; 149 are unassigned. Maps at an angular resolution of {approx}3'' were obtained for each line. A substantial new population of narrow lines with an expansion velocity of {approx}4 km s{sup -1} (i.e., {approx}30% of the terminal velocity) was detected. Most of these are attributed to rotational transitions within vibrationally excited states, emitted from energy levels above the v = 0, J = 0 ground state with excitation energy of 1000-3000 K. Emission from these lines appears to be centered on the star with an angular extent of <1''. We use multiple transitions detected in several molecules to derive physical conditions in this inner envelope of IRC+10216.

79 ASTRONOMY AND ASTROPHYSICS↗

Construction and Analysis of Two Baryon Correlation functions

The signal to noise ratio of baryon two point functions grows exponentially with Euclidean time hindering reliable extraction of the energy levels of the system. The problem becomes more acute in the case of two or more baryon correlation functions. For this reason special care is needed in both constructing, and analyzing two point functions of multi-baryon systems. In this talk I discuss methods for extracting the energy levels associated from two point functions for two baryon systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of optical near-field energy transfer by stochastic model unifying architectural dependencies

We theoretically and experimentally demonstrate energy transfer mediated by optical near-field interactions in a multi-layer InAs quantum dot (QD) structure composed of a single layer of larger dots and N layers of smaller ones. We construct a stochastic model in which optical near-field interactions that follow a Yukawa potential, QD size fluctuations, and temperature-dependent energy level broadening are unified, enabling us to examine device-architecture-dependent energy transfer efficiencies. The model results are consistent with the experiments. This study provides an insight into optical energy transfer involving inherent disorders in materials and paves the way to systematic design principles of nanophotonic devices that will allow optimized performance and the realization of designated functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fe ion-implanted TiO{sub 2} thin film for efficient visible-light photocatalysis

This work shows the application of metal ion-implantation to realize an efficient second-generation TiO{sub 2} photocatalyst. High fluence Fe{sup +} ions were implanted into thin TiO{sub 2} films and subsequently annealed up to 550 °C. The ion-implantation process modified the TiO{sub 2} pure film, locally lowering its band-gap energy from 3.2 eV to 1.6–1.9 eV, making the material sensitive to visible light. The measured optical band-gap of 1.6–1.9 eV was associated with the presence of effective energy levels in the energy band structure of the titanium dioxide, due to implantation-induced defects. An accurate structural characterization was performed by Rutherford backscattering spectrometry, transmission electron microscopy, Raman spectroscopy, X-ray diffraction, and UV/VIS spectroscopy. The synthesized materials revealed a remarkable photocatalytic efficiency in the degradation of organic compounds in water under visible light irradiation, without the help of any thermal treatments. The photocatalytic activity has been correlated with the amount of defects induced by the ion-implantation process, clarifying the operative physical mechanism. These results can be fruitfully applied for environmental applications of TiO{sub 2}.

36 MATERIALS SCIENCE↗

Light-driven permanent transition from insulator to conductor

The transition from insulator to conductor can be realized in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a different mechanism the lattice may adopt to induce such a transition. Experiments showed the surprising finding that limited exposure to subband-gap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga 2 O 3 , with a nine orders of magnitude increase in electronic conduction. Furthermore, annealing up to 400 °C did not suppress or decrease the induced conductivity. Photoexcitation by light-induced modification in the charge state of defects and subsequent lattice distortion around them was suggested to be the underlying mechanism behind this transition. Density functional theory calculations confirmed that modifying the charge state of defects leads to redistribution of the localized electrons and massive structural distortion in the surrounding lattice, causing large shifts in the density of states and introducing new states with shallower energy levels. Both experimental and theoretical results revealed the introduction of stable shallow energy levels, explaining the mechanism behind the transition from an insulator to a conductor state by light. We suggest that this mechanism may occur in other wide band-gap metal oxides leading to drastic modification in their electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automatic 3D image registration for nano-resolution chemical mapping using synchrotron spectro-tomography

Nano-resolution synchrotron X-ray spectro-tomography has been demonstrated as a powerful tool for probing the three-dimensional (3D) structural and chemical heterogeneity of a sample. By reconstructing a number of tomographic data sets recorded at different X-ray energy levels, the energy-dependent intensity variation in every given voxel fingerprints the corresponding local chemistry. The resolution and accuracy of this method, however, could be jeopardized by non-ideal experimental conditions, e.g. instability in the hardware system and/or in the sample itself. Herein is presented one such case, in which unanticipated sample deformation severely degrades the data quality. Here, to address this issue, an automatic 3D image registration method is implemented to evaluate and correct this effect. The method allows the redox heterogeneity in partially delithiated Li x Ta 0.3 Mn 0.4 O 2 battery cathode particles to be revealed with significantly improved fidelity.

3D image registration↗