Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Molecular engineering of dispersed nickel phthalocyanines on carbon nanotubes for selective CO 2 reduction

Electrochemical reduction of CO 2 is a promising route for sustainable production of fuels. A grand challenge is developing low-cost and efficient electrocatalysts that can enable rapid conversion with high product selectivity. Here we design a series of nickel phthalocyanine molecules supported on carbon nanotubes as molecularly dispersed electrocatalysts (MDEs), achieving CO 2 reduction performances that are superior to aggregated molecular catalysts in terms of stability, activity and selectivity. The optimized MDE with methoxy group functionalization solves the stability issue of the original nickel phthalocyanine catalyst and catalyses the conversion of CO 2 to CO with >99.5% selectivity at high current densities of up to -300 mA cm -2 in a gas diffusion electrode device with stable operation at -150 mA cm -2 for 40 h. The well-defined active sites of MDEs also facilitate the in-depth mechanistic understandings from in situ/operando X-ray absorption spectroscopy and theoretical calculations on structural factors that affect electrocatalytic performance.

42 ENGINEERING↗
DOE OSTI2022

High current density electroreduction of CO 2 into formate with tin oxide nanospheres

In this study, we demonstrate three-dimensional (3D) hollow nanosphere electrocatalysts for CO 2 conversion into formate with excellent H-Cell performance and industrially-relevant current density in a 25 cm 2 membrane electrode assembly electrolyzer device. Varying calcination temperature maximized formate production via optimizing the crystallinity and particle size of the constituent SnO 2 nanoparticles. The best performing SnO 2 nanosphere catalysts contained ~ 7.5 nm nanocrystals and produced 71–81% formate Faradaic efficiency (FE) between -0.9 V and -1.3 V vs. the reversible hydrogen electrode (RHE) at a maximum formate partial current density of 73 ± 2 mA cm geo -2 at -1.3 V vs. RHE. The higher performance of nanosphere catalysts over SnO 2 nanoparticles and commercially-available catalyst could be ascribed to their initial structure providing higher electrochemical surface area and preventing extensive nanocrystal growth during CO 2 reduction. Our results are among the highest performance reported for SnO 2 electrocatalysts in aqueous H-cells. We observed an average 68 ± 8% FE over 35 h of operation with multiple on/off cycles. In situ Raman and time-dependent X-ray diffraction measurements identified metallic Sn as electrocatalytic active sites during long-term operation. Further evaluation in a 25 cm 2 electrolyzer cell demonstrated impressive performance with a sustained current density of 500 mA cm geo -2 and an average 75 ± 6% formate FE over 24 h of operation. Our results provide additional design concepts for boosting the performance of formate-producing catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface

Efficient electrocatalysts for the oxygen evolution reaction (OER) are paramount to the development of electrochemical devices for clean energy and fuel conversion. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the surface catalytic sites and OER mechanisms. Here, we report that catalytic single-site Co in a well-defined brookite TiO 2 nanorod (210) surface (Co-TiO 2 ) presents turnover frequencies that are among the highest for Co-based heterogeneous catalysts reported to date, reaching 6.6 ± 1.2 and 181.4 ± 28 s -1 at 300 and 400 mV overpotentials, respectively. Based on grand canonical quantum mechanics calculations and the single-site Co atomic structure validated by in situ and ex situ spectroscopic probes, we have established a full description of the catalytic reaction kinetics for Co-TiO 2 as a function of applied potential, revealing an adsorbate evolution mechanism for the OER. The computationally predicted Tafel slope and turnover frequencies exhibit exceedingly good agreement with experiment.

25 ENERGY STORAGE↗
DOE OSTI2020

Phase segregation reversibility in mixed-metal hydroxide water oxidation catalysts

Achieving stable, low-cost electrocatalysts represents a daunting challenge towards practical water oxidation reactions. Here, we report that a degraded electrocatalyst can be revivified under catalytic operating conditions by manipulating reversible phase segregation. Under the oxygen evolution reaction conditions, Fe segregation develops in the Ni–Fe hydroxide host lat- tice, with the formation of FeOOH, resulting in an interface between the FeOOH and the host lattice. A dynamic metal dissolu- tion–redeposition process accelerates the Fe segregation and formation of the FeOOH secondary phase, resulting in catalyst deactivation. Operando synchrotron spectroscopic and microscopic analyses suggest that the phase segregation is revers- ible between the water oxidation potential and the catalyst reduction potential. Therefore, we have developed an intermittent reduction methodology to revivify the catalytic activity under the operating conditions, enhancing catalyst durability. The pres- ent study highlights that tailoring phase segregation at the catalyst/electrolyte interface constitutes an important strategy for revivifying and stabilizing catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Interpreting Tafel behavior of consecutive electrochemical reactions through combined thermodynamic and steady state microkinetic approaches

Assessing the reaction pathway of multi-electron-transfer reactions is an essential yet difficult task for the rational design of electrocatalysts. In this work, we develop a heuristic approach that combines thermodynamic adsorption energetics calculated through density functional theory with microkinetic modeling using the steady state approximation to interpret the potential-dependent Tafel behavior of consecutive electrochemical reactions. In doing so, we introduce a kinetic framework for ab initio calculations that ensures self-consistent adsorption energetics based on kinetically limited adsorbate coverages. The approach is applied to experimental results on CoO x (OH) 2-x single crystal electrocatalyst particles yielding coverage dependent mechanistic information and identification of the rate-limiting step with standard rate constants for the oxygen evolution reaction on the ($11\bar{2}0$) surfaces of the β-Co(OH) 2 , β-CoOOH, and CoO 2 bulk phases. Finally, this generalizable method enables catalyst benchmarking based on determining the active species involved and associated intrinsic reaction rate constants in consecutive multi-electron-transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Testing the predictive power of theory for Pd x Ir (100-x) alloy nanoparticles for the oxygen reduction reaction

Here, density functional theory (DFT) calculations of O and OH binding energies on triatomic surface ensembles of Pd x Ir (100-x) nanoalloys successfully predicted the overall trend in experimental oxygen reduction reaction (ORR) activity as a function of nanoparticle (NP) composition. Specifically, triatomic Pd 3 ensembles were found to possess optimal O and OH binding energies and were predicted to be highly active sites for the ORR, rivaling that of Pt(111). However, DFT calculations suggest that the O binding energy increases at active sites containing Ir, thereby decreasing ORR activity. Pd x Ir (100-x) nanoalloys were synthesized using a microwave-assisted method and their activity towards the ORR was tested using rotating disk voltammetry (RDV). As predicted, the bimetallic electrocatalysts exhibited worse catalytic activity than the Pd-only NPs. The strong qualitative correlation between the theoretical and experimental results demonstrates that the activity of individual active sites on the surface of NPs can serve as a proxy for overall activity. This is a particularly useful strategy for applying DFT calculations to electrocatalysts that are too large for true first-principle analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO 3 – ) and improved electrocatalysts are needed. Here we study the electrocatalytic activity of rhodium sulfide supported on carbon (Rh x S y /C) for the reduction of nitrate and compare it against Pt/C and Rh/C in the presence of chloride. Between 0.05–0.15 V vs. RHE, Rh x S y /C has a steady-state nitrate reduction current density in 1 M H 2 SO 4 + 1 M NaNO 3 that is 1.6–5.6 times greater than Rh/C (the most active metal electrocatalyst) and 10–24 times greater than Pt/C. Current densities are decreased by 37% for Rh x S y /C, 62% for Rh/C, and 40% for Pt/C at 0.1 V vs. RHE in the presence of 1 mM chloride. The decrease in nitrate reduction activity for Pt, Rh, and Rh x S y is due to the competitive adsorption of chloride and nitrate on the surface. Density functional theory (DFT) modeling predicts that chloride poisoning will persistently inhibit nitrate reduction on metals due to linear adsorbate scaling relations between nitrate and chloride. DFT calculations and microkinetic modeling of our experimental measurements predict that nitrate converts to nitrite via an H-assisted dissociation mechanism on Pt and direct nitrate dissociation on Rh and Rh x S y . Pristine Rh x S y (i.e., Rh 3 S 4 , Rh 2 S 3 , and Rh 17 S 15 ) terraces are predicted to be inactive toward nitrate reduction. In contrast, sulfur vacancies in Rh 3 S 4 terraces are predicted to be active for nitrate reduction, but also bind chloride strongly. Furthermore, sulfur-defected Rh 3 S 4 rationalize the experimentally observed high activity but moderate chloride poison-resistance of Rh x S y /C for nitrate reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrocatalytic water oxidation performance in an extended porous organic framework with a covalent alliance of distinct Ru sites

The rational synthesis of durable, earth-abundant efficient electrocatalysts for the oxygen evolution reaction (OER) from water is one of the most important routes for storing renewable energy and minimizing fossil fuel combustion. The prime hurdles for effectively utilizing commercial RuO 2 as (OER) electrocatalysts are its very low stability, catalyst deactivation, and high cost. In this work, we explored a Ru-integrated porous organic polymer (Ru@Bpy-POP) by a facile one-pot Friedel–Crafts alkylation strategy between redox-active (Ru(demob) 3 Cl 2 ) and a carbazole unit, which is composed of unique features including an extended framework unit, isolated active sites, and tunable electrode kinetics. Ru@Bpy-POP can serve as a bridge between a Metal–Organic Framework (MOF) and POP-based catalytic systems with a balanced combination of covalent bonds (structural stability) and open metal sites (single site catalysis). Ru@Bpy-POP, deposited on a three-dimensional nickel foam electrode support, exhibits a promising electrocatalytic OER activity with an ultra-low ruthenium loading compared to a benchmark RuO 2 catalyst, providing an overpotential of about 270 mV to reach 10 mA cm –2 in an alkaline medium. Moreover, a high current density of 248 mA cm –2 was achieved for the Ru@Bpy-POP catalyst at only 1.6 V (vs. RHE), which is much higher than 91 mA cm –2 for commercial RuO 2 . The robust, albeit highly conjugated, POP framework not only triggered facile electro-kinetics but also suppressed aggregation and metallic corrosion during electrolysis. In particular, the benefits of covalent integration of distinct Ru sites into the framework can modulate intermediate adsorption and charge density, which contributes to its exceptional OER activity. All of the critical steps involved in OER are complemented by Density Functional Theory (DFT) calculations, which suggest that electrocatalytic water oxidation proceeds from a closed-shell configuration to open-shell electronic configurations with high-spin states. Finally, these open-shell configurations are more stable than their closed-shell counterparts by 1 eV, improving the overall catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enabling technologies for the continuous electrically driven conversion of CO 2 and water to multi-carbon products at high current densities

Here, we demonstrate greatly improved conversion of CO 2 using a gas diffusion electrode (GDE) with flowing electrolyte configuration for CO 2 gas delivery in combination with a high surface area nickel phosphide electrocatalyst. This configuration achieves 40–50% selectivity for total carbon products over H 2 formation (HER) at total current densities ranging from 50 to 300 mA cm -2 . We developed a soft-templating method using CTAB detergent micelles for synthesis of phase-pure Ni 2 P, achieving a 260-fold larger surface area (BET) and porous sponge-like morphology that produces stable currents. This catalyst produces mainly one C-product, methylglyoxal (MG, C 3 H 4 O 2 ) with 38–47% overall selectivity, the highest reported selectivity for a 12-electron reduction product. The versatile soft-templating method for electrocatalyst synthesis uses low-temperature (185 °C) that is permissive for incorporation of co-catalysts that are otherwise destroyed by the high temperatures used in traditional solid-state synthesis (SSS). The non-porous Ni 2 P-SSS catalyst produces mainly H 2 at these current densities. Achieving these high currents and C/H selectivity benefits from use of hydrophobic polymers as co-catalyst binders (cationic = Nafion, anionic = PFAEM and neutral = PTFE) to improve CO 2 conversion. PFAEM is the better ionomer for the CO 2 RR at high current density, postulated as due to suppressing CO 2 conversion to inactive bicarbonate. Precipitation of the carbon products as a polycarbonate polymer occurs at high currents.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Charting C–C coupling pathways in electrochemical CO 2 reduction on Cu(111) using embedded correlated wavefunction theory

The electrochemical CO 2 reduction reaction (CO 2 RR) powered by excess zero-carbon-emission electricity to produce especially multicarbon (C 2+ ) products could contribute to a carbon-neutral to carbon-negative economy. Foundational to the rational design of efficient, selective CO 2 RR electrocatalysts is mechanistic analysis of the best metal catalyst thus far identified, namely, copper (Cu), via quantum mechanical computations to complement experiments. Here, we apply embedded correlated wavefunction (ECW) theory, which regionally corrects the electron exchange-correlation error in density functional theory (DFT) approximations, to examine multiple C–C coupling steps involving adsorbed CO (*CO) and its hydrogenated derivatives on the most ubiquitous facet, Cu(111). We predict that two adsorbed hydrogenated CO species, either *COH or *CHO, are necessary precursors for C–C bond formation. The three kinetically feasible pathways involving these species yield all three possible products: *COH–CHO, *COH–*COH, and *OCH–*OCH. The most kinetically favorable path forms *COH–CHO. In contrast, standard DFT approximations arrive at qualitatively different conclusions, namely, that only *CO and *COH will prevail on the surface and their C–C coupling paths produce only *COH–*COH and *CO–*CO, with a preference for the first product. This work demonstrates the importance of applying qualitatively and quantitatively accurate quantum mechanical method to simulate electrochemistry in order ultimately to shed light on ways to enhance selectivity toward C 2+ product formation via CO 2 RR electrocatalysts.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Switching of electrochemical selectivity due to plasmonic field-induced dissociation

Electrochemical reactivity is known to be dictated by the structure and composition of the electrocatalyst–electrolyte interface. Here, we show that optically generated electric fields at this interface can influence electrochemical reactivity insofar as to completely switch reaction selectivity. We study an electrocatalyst composed of gold–copper alloy nanoparticles known to be active toward the reduction of CO 2 to CO. However, under the action of highly localized electric fields generated by plasmonic excitation of the gold–copper alloy nanoparticles, water splitting becomes favored at the expense of CO 2 reduction. Real-time time-dependent density functional tight binding calculations indicate that optically generated electric fields promote transient-hole-transfer-driven dissociation of the O─H bond of water preferentially over transient-electron-driven dissociation of the C─O bond of CO 2 . These results highlight the potential of optically generated electric fields for modulating pathways, switching reactivity on/off, and even directing outcomes.

Alcorn, Francis M.↗
DOE OSTI2025

Enhancing electrocatalytic performance of RuO 2 -based catalysts: mechanistic insights, strategic approaches, and recent advances

Abstract Electrochemical water splitting presents the ultimate potential of hydrogen and oxygen production; however, regulating the rate and efficiency of water splitting is highly dependent on the accessibility of extremely efficient electrode materials for slow performance kinetics and large overpotential of both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Ruthenium oxide (RuO 2 ) based materials display high performance for OER and HER because of their capacity to bind oxygen, eminent catalytic activity, low cost compared to other precious metals, and stability in a wide pH range. However, there is still much space to promote the OER and HER activity and stability of RuO 2 to fulfill the necessity for practical applications in water splitting. Different researchers applied multiple approaches that boosted the catalytic performance of RuO 2 -based electrocatalysts toward overall water splitting. Herein, this review provides a comprehensive overview of recent advancements in RuO 2 -based materials in the field of water electrolysis for the generation of alternative energies. It gives a general description of water splitting in acidic and alkaline settings, including reaction mechanisms as well as common evaluation elements for the catalytic function of the materials. Most of the reviews reported based on RuO 2 materials are only focused on OER performance, but this review highlighted comprehensive ideas on different strategies like morphology design, electronic structure, electrolytes, and compositions for optimizing both electrocatalytic HER and OER functioning of RuO 2 -based electrocatalysts.

KC, Binod Raj (ORCID:0009000885806906)↗
DOE OSTI2020

Highly Durable, Surface Modified SOFCs Running on Hydrocarbon Fuels at 600 °C

Fuel flexibility is a unique feature of solid oxide fuel cells (SOFCs), the instability of Ni-based cermet anodes in hydrocarbon fuels impede the advancement of low-temperature solid oxide fuel cells (LT-SOFCs). Here we demonstrate highly stable LT-SOFCs prepared by catalytically modifying the surface of a conductive ceramic oxide, SrFe 0.2 Co 0.4 Mo 0.4 O 3 (SFCM), using Ni-GDC nanoparticles (<100 nm). The nano-sized Ni-GDC electrocatalysts, resulting from careful optimization of Ni-to-GDC ratio, and subsequent low-temperature calcination process, enhance the fuel oxidation kinetics and stability of SFCM anode significantly. An optimized Ni-to-GDC ratio of 1:10 on SFCM-supported SOFC delivered peak power density of 0.75, 0.65 and 0.36 W cm -2 at 650 °C, 600 °C and 550 °C, respectively, in humidified H2 and 0.62, 0.39 and 0.22 W cm -2 at 650 °C, 600 °C and 550 °C, respectively, in CH 4 /H 2 gas mixtures, nearly 4× higher than GDC as electrocatalyst. Notably, for the same Ni-to-GDC ratio, a stable cell voltage of 0.82 V is maintained over 200 h of operations (under current) at 600 °C in CH 4 /H 2 gas mixtures.

25 ENERGY STORAGE↗
DOE OSTI2024

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Editors’ Choice—Rapid Deactivation Convolutes Electrochemical CO 2 Reduction Selectivity Measurements on Gold Rotating Ring Disk Electrodes

Voltammetric measurements of electrochemical CO 2 reduction reaction (CO 2 RR) selectivity on rotating ring disk electrodes (RRDE) are a rapid and sensitive method for quantifying an electrocatalyst’s selectivity, i.e. faradaic efficiency (FE). This method has been applied to polycrystalline Au electrocatalysts where a Au disk electrode catalyzes both the CO 2 RR and hydrogen evolution reaction while the concentric Au ring electrode selectively senses CO by oxidizing CO back to CO 2 . Such measurements enabled fundamental mechanistic studies but suffer from poor inter-laboratory reproducibility. This work identifies causes of variability in RRDE selectivity measurements by comparing protocols with different electrochemical methods, reagent purities, and glassware cleaning procedures. We observed FE CO decrease by 56% during 5 min chronoamperometry measurements, a phenomenon that is not readily apparent in voltammetric scans due to their dynamic nature. Electroplating of electrolyte impurities onto the disk and ring surfaces were identified as a major contributor to Au deactivation. Additionally, the oxygen reduction reaction may lead to higher disk currents in inadequately purged electrolytes, causing an apparent underestimation of FE CO at low overpotentials. Lastly, we propose operational bounds for CO 2 RR selectivity measurements on Au using the RRDE method and provide suggestions on steps for improving the accuracy of this technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mathematical Modeling of Hydroxide-Exchange-Membrane Water Electrolyzer

Water electrolyzers can transform intermittent renewable energy like solar energy and wind energy into the chemical energy of hydrogen with zero greenhouse-gas emissions. The hydroxide-exchange membrane electrolyzer (HEME) combines the capability to produce pressurized hydrogen with the advantage of being able to use low or non-platinum group metal (PGM) electrocatalysts in the alkaline environment.1 Hydroxide salts, for example, KOH, are added to the HEME water feed on both anode and cathode to improve its performance. However, the specific mechanism of performance improvement still needs to be further understood. In addition, at high current densities, bubble evolution can result in mass-transport limitations, a less well studied phenomena. Mathematical modeling is ideal to explore these issues as it is cost and time efficient and can deconvolute the physics, processes, and observed phenomena and study the applied-voltage breakdown. In this work, we extend our previously developed 1D two-phase continuum model2 to study the varies processes in the HEME and provide insights on performance optimizations. First, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) kinetics at different hydroxide concentrations have been studied by rotating disk electrodes (RDE) and implemented in the model. Then, the model is calibrated and validated against experimental HEME polarization curves for different KOH concentrations as a liquid electrolyte. The model clearly shows a performance increase with increasing KOH concentrations, which is consistent with the experimental results. The reduced ohmic resistance and increased electrochemical active surface area (ECSA) are the two main reasons for performance increase. The large amount of hydroxide in the liquid electrolyte not only helps to distribute the reactant hydroxide throughout the catalyst layer (CL), which reduces ohmic loss, but also enables reaction at the interface between the liquid electrolyte and electrocatalyst, which increases the ECSA. Applied-voltage breakdown demonstrates that the electrolyzer performance is dominated by anode kinetics and ohmic loss. A comparison with the DI water feed shows a more uniform current distribution in the anode CL when KOH is added, which indicates a higher utilization of the CL. Second, we present modeling on the effects of bubble coverage. As gas evolves, part of the ECSA is minimized due to bubble coverage. To account for this effect, an empirical relationship between the fractional bubble coverage and the current density is implemented in the model.3 The model shows this bubble coverage effect is more pronounced at large current densities with DI water feed. Acknowledgements This work was funded under the HydroGEN Consortium by the Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, of the U. S. Department of Energy under contract number DE-AC02-05CH11231. References R. Abbasi, B. P. Setzler, S. Lin, J. Wang, Y. Zhao, H. Xu, B. Pivovar, B. Tian, X. Chen, G. Wu and Y. Yan, 31, 1805876 (2019). L. N. Stanislaw, M. R. Gerhardt and A. Z. Weber, ECS Transactions, 92, 767 (2019). H. Vogt and R. J. Balzer, Electrochimica Acta, 50, 2073 (2005).

Liu, Jiangjin↗
DOE OSTI2021

Controlled exposure of CuO thin films through corrosion-protecting, ALD-deposited TiO 2 overlayers

Ultra-thin film coatings are used to protect semiconductor photoelectrodes from the harsh chemical environments common to photoelectrochemical energy conversion. These layers add contact transfer resistance to the interface that can result in a reduction of photoelectrochemical energy conversion efficiency of the photoelectrode. Here, we describe the concept of a partial protection layer, which allows for direct chemical access to a small fraction of the semiconductor underlayer for further functionalization by an electrocatalyst. The rest of the interface remains protected by a stable, inert protection layer. CuO is used as a model system for this scheme. Atomic layer deposition (ALD)-prepared TiO 2 layers on CuO thin films prepared from electrodeposited Cu 2 O allow for the control of interfacial morphology to intentionally expose the CuO underlayer. The ALD-TiO 2 overlayer shrinks during crystallization, while Cu 2 O in the underlayer expands during oxidation. As a result, the TiO 2 protection layer cracks to expose the oxidized underlying CuO layer, which can be controlled by preceding thermal oxidation. Furthermore, this work demonstrates a potentially promising strategy for the parallel optimization of photoelectrochemical interfaces for chemical stability and high performance.

14 SOLAR ENERGY↗