Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffraction systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

The Advanced Technology Large-Aperture Space Telescope (ATLAST) Technology Roadmap

We present the key technologies and capabilities that will enable a future, large-aperture ultravioletopticalinfrared (UVOIR) space observatory. These include starlight suppression systems, vibration isolation and control systems, lightweight mirror segments, detector systems, and mirror coatings. These capabilities will provide major advances over current and near-future observatories for sensitivity, angular resolution, and starlight suppression. The goals adopted in our study for the starlight suppression system are 10-10 contrast with an inner working angle of 40 milliarcsec and broad bandpass. We estimate that a vibration and isolation control system that achieves a total system vibration isolation of 140 dB for a vibration-isolated mass of 5000 kg is required to achieve the high wavefront error stability needed for exoplanet coronagraphy. Technology challenges for lightweight mirror segments include diffraction-limited optical quality and high wavefront error stability as well as low cost, low mass, and rapid fabrication. Key challenges for the detector systems include visible-blind, high quantum efficiency UV arrays, photon counting visible and NIR arrays for coronagraphic spectroscopy and starlight wavefront sensing and control, and detectors with deep full wells with low persistence and radiation tolerance to enable transit imaging and spectroscopy at all wavelengths. Finally, mirror coatings with high reflectivity ( 90), high uniformity ( 1) and low polarization ( 1) that are scalable to large diameter mirror substrates will be essential for ensuring that both high throughput UV observations and high contrast observations can be performed by the same observatory.

Telescope↗

A Future Large-Aperture UVOIR Space Observatory: Key Technologies and Capabilities

We present the key technologies and capabilities that will enable a future, large-aperture ultravioletopticalinfrared (UVOIR) space observatory. These include starlight suppression systems, vibration isolation and control systems, lightweight mirror segments, detector systems, and mirror coatings. These capabilities will provide major advances over current and near-future observatories for sensitivity, angular resolution, and starlight suppression. The goals adopted in our study for the starlight suppression system are 10-10 contrast with an inner working angle of 20 milliarcsec and broad bandpass. We estimate that a vibration and isolation control system that achieves a total system vibration isolation of 140 dB for a vibration-isolated mass of 5000 kg is required to achieve the high wavefront error stability needed for exoplanet coronagraphy. Technology challenges for lightweight mirror segments include diffraction-limited optical quality and high wavefront error stability as well as low cost, low mass, and rapid fabrication. Key challenges for the detector systems include visible-blind, high quantum efficiency UV arrays, photon counting visible and NIR arrays for coronagraphic spectroscopy and starlight wavefront sensing and control, and detectors with deep full wells with low persistence and radiation tolerance to enable transit imaging and spectroscopy at all wavelengths. Finally, mirror coatings with high reflectivity ( 90), high uniformity ( 1) and low polarization ( 1) that are scalable to large diameter mirror substrates will be essential for ensuring that both high throughput UV observations and high contrast observations can be performed by the same observatory.

Instrument↗

Bragg glass signatures in Pd x ErTe 3 with X-ray diffraction temperature clustering

The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge-density-wave systems in the presence of disorder. Detecting it has been challenging, despite its sharp theoretical definition in terms of diverging correlation lengths. Here we present bulk probe evidence supporting a Bragg glass phase in the systematically disordered charge-density-wave material of Pd x ErTe 3 . We do this by using comprehensive X-ray data and a machine-learning-based analysis tool called X-ray diffraction temperature clustering (X-TEC). We establish a diverging correlation length in samples with moderate intercalation over a wide temperature range. To enable this analysis, we introduced a high-throughput measure of inverse correlation length that we call peak spread. The detection of Bragg glass order and the resulting phase diagram advance our understanding of the complex interplay between disorder and fluctuations. Moreover, the use of our analysis technique to target fluctuations through a high-throughput measure of peak spread can revolutionize the study of fluctuations in scattering experiments.

36 MATERIALS SCIENCE↗

Dynamic, Adaptive, Systems and Materials: Complex, Simple and Emergent Behaviors

This program has been funded by DoE/BES for twenty years. It has moved into and out of various subjects as it has developed, but it has retained its focus on complexity and complex systems. The project has evolved in the following way: Self-Assembly and Biomimetic Self-Assembly: All self-assembling systems depend upon a minimum of two types of interaction: a repulsion and an attraction. For the familiar molecular systems, attractive interactions are typically hydrogen bonds and electrostatic interactions. Repulsive interactions include steric effects, hydrophobic effects (in biological systems), and charge-charge repulsion. We have expanded this repertoire to include surface interactions, magnetic interactions, and others. I list these systems in the order in which we have explored them: i) A key emphasis in current work is in understanding how the movement of ions in a magnetic field (the Lorentz effect) interacts with catalytic systems. We have demonstrated that an acceleration in rate of reduction of CO 2 to CO can be accomplished by applying an external magnetic field. This acceleration is largely due to the application of the Lorentz effect on mass transport at the catalyst’s surface. ii) We have also extensively explored the influence of electrostatics, as exhibited in self-assembling systems, by tribocharging. iii) Another key system involves surface tension effects; examples include interactions between heavy particles floating at a liquid-air interface, and interacting by changes in surface area; interactions of bubbles and bubble rafts, behaviors of bubble trains in microfluidic networks, and behaviors of microorganisms in constraining environments. iv) This work has intentionally de-emphasized biological systems; but it does include some work on protein-ligand interactions and interactions among microorganisms. v) We have also explored applications of some of these effects, these explorations include bubble rafts as diffraction gratings, exploration of the structures that can be obtained by tribocharging and uses of these structures in exploring nucleation and melting of crystals. vi) Although not a major focus of this work, several other topics have emerged and offer opportunities for future work. These include the behavior of bubble trains and bubble rafts in microfluidic systems. A particularly interesting example is the formation of bubble trains that repeat in the alteration of large and small bubbles according to rules we do not presently understand, but are uniquely large-period oscillating systems. These systems offer a new route into understanding the instabilities of the type represented by oscillations. vii) We have also begun exploratory projects on magnetic levitation (especially to determine molecular density), and information storage (in molecules). Magnetic Levitation: Self-assembling and biomimetic systems require both attraction and repulsion. We have used electrostatics (tribocharging), interfacial free-energies (surface tension and related forces) and others. Potential uses include reconfigurable diffraction gratings and liquid lenses; exploration of mechanisms in tribocharging; tunneling in EGaIn junctions; and bubble trains (especially in micro-fluidic systems). Examples of systems representing these topics is included in the following papers: Complexity: Disks rotating at a water-air interface; Benard-Marangoni effects; Vortex-Crystals from spinning magnetic disks (Marangoni effects); EGaIn Electrode to study quantum tunneling; Self-Assembly of electrostatically-charged metallic spheres (electrets); Dynamically reconfigurable lens; Using computational designs of ligands for enzymes; Electrostatic self-assembly by tribocharging; Monodisperse bubble trains in microchannel systems; Inverted dripping faucet; Flames; Printing of micro-organisms to regenerate the “ink” of printing device; Using micro-organisms to move loads (“microoxen”); Motion of bacterial swarms near surfaces; Making monodisperse particles in microfluidic systems; Coding/decoding of information stored in droplet trains in microfluidic networks; Magnetic levitation; and Information storage. i) Tribocharging. The change in focus of this work on electrets from the fundamentals of charging to applications of these materials in studying self-assembly using electrostatic interactions. ii) Bubbles in Microchannels. The realization that systems of bubbles in microchannels represented a major opportunity to study complexity in a very tractable system, and the development of a semi-quantitative theory of this subject. iii) Flames. The growth of “flames” remains an exploratory subject for the research, although their currently relatively little active work involving it ongoing. iv) Systems with Microorganisms. The removal of work in biological systems from this project. Based on work supported in this program, we now have a significant project on the development of microfluidic tools for studying C. elegans (a nematode), but this work was not appropriate for a program focused on complexity, and we developed separate support for it. (It is, however, an example of successful seeding of a new area by BES.) The work on electrets has gone through a period in which a part of the program was the subject of a MURI; the focus of this work was to develop materials that did not charge electrostatically on friction or contact. The MURI is now over, and the work on dynamic self-assembly (supported by BES) is the major focus. “Flames” has also enjoyed synergistic support, in terms of a project supported by DARPA on flame suppression (in the absence of extinguishing agents, using acoustic and electrostatic interactions). This work was helpful in understanding some of the basics of flames, but is entirely distinct from the BES focus in complexity. A growing interest is in the Lorentz effect. The Lorentz effect is the force exerted on charged particles (electrons, ions, charged molecules) when they move through a perpendicular magnetic field. The Lorentz effect is almost ubiquitous in modern technology: examples of applications include electric motors, dynamos, cathode ray tubes, many batteries, and most systems that control electrical currents with magnetic forces. We have begun to explore the Lorentz effect in electrochemical systems and heterogeneous catalytic systems involving charged organic species and inorganic ions. This work is still at an early stage, but initial studies that Lorentz effects can be large when ions move through magnetic fields, or magnetic fields move in the presence of ions.

36 MATERIALS SCIENCE↗

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗

E-beam generated holographic masks for optical vector-matrix multiplication

An optical vector matrix multiplication scheme that encodes the matrix elements as a holographic mask consisting of linear diffraction gratings is proposed. The binary, chrome on glass masks are fabricated by e-beam lithography. This approach results in a fairly simple optical system that promises both large numerical range and high accuracy. A partitioned computer generated hologram mask was fabricated and tested. This hologram was diagonally separated outputs, compact facets and symmetry about the axis. The resultant diffraction pattern at the output plane is shown. Since the grating fringes are written at 45 deg relative to the facet boundaries, the many on-axis sidelobes from each output are seen to be diagonally separated from the adjacent output signals.

Arnold, S. M.↗

High resolution observations of low contrast phenomena from an Advanced Geosynchronous Platform (AGP)

Present technology allows radiometric monitoring of the Earth, ocean and atmosphere from a geosynchronous platform with good spatial, spectral and temporal resolution. The proposed system could provide a capability for multispectral remote sensing with a 50 m nadir spatial resolution in the visible bands, 250 m in the 4 micron band and 1 km in the 11 micron thermal infrared band. The diffraction limited telescope has a 1 m aperture, a 10 m focal length (with a shorter focal length in the infrared) and linear and area arrays of detectors. The diffraction limited resolution applies to scenes of any brightness but for a dark low contrast scenes, the good signal to noise ratio of the system contribute to the observation capability. The capabilities of the AGP system are assessed for quantitative observations of ocean scenes. Instrument and ground system configuration are presented and projected sensor capabilities are analyzed.

Maxwell, M. S.↗

High-resolution observations of low contrast phenomena from an advanced geosynchronous platform

Present technology allows radiometric monitoring of the earth, ocean and atmosphere from a geosynchronous platform with good spatial, spectral and temporal resolution. The proposed system could provide a capability for multispectral remote sensing with a 50 m nadir spatial resolution in the visible bands, 250 m in the 4 micron band and 1 km in the 11 micron thermal infrared band. The diffraction limited telescope has a 1 m aperture, a 10 m focal length (with a shorter focal length in the infrared) and linear and area arrays of detectors. The diffraction limited resolution applies to scenes of any brightness but for a dark low contrast scenes, the good signal to noise ratio of the system contribute to the observation capability. The capabilities of the AGP system are assessed for quantitative observations of ocean scenes. Instrument and ground system configuration are presented and projected sensor capabilities are analyzed.

Maxwell, M. S.↗

Image motion compensation on the Spacelab 2 Solar Optical Universal Polarimeter /SL2 SOUP/

The SOUP experiment on Spacelab 2 includes a 30 cm visible light telescope and focal plane package mounted on the Instrument Pointing System (IPS). Scientific goals of the experiment dictate pointing stability requirements of less than 0.05 arcsecond jitter over periods of 5-20 seconds. Quantitative derivations of these requirements from two different aspects are presented: (1) avoidance of motion blurring of diffraction-limited images; (2) precise coalignment of consecutive frames to allow measurement of small image differences. To achieve this stability, a fine guider system capable of removing residual jitter of the IPS and image motions generated on the IPS cruciform instrument support structure has been constructed. This system uses solar limb detectors in the prime focal plane to derive an error signal. Image motion due to pointing errors is compensated by the agile secondary mirror mounted on piezoelectric transducers, controlled by a closed-loop servo system.

Tarbell, T. D.↗

Structure and Anharmonicity of α- and β -Sb 2 O 3 at Low Temperature

Antimony oxides are important materials for catalysis and flame-retardant applications. The two most common phases, α-Sb 2 O 3 (senarmontite) and β-Sb 2 O 3 (valentinite), have been studied extensively. Specific focus has been placed recently on their lattice dynamics properties and how they relate to the α-β phase transformation and their potential anharmonicity. However, there has not been any direct investigation of anharmonicity in these systems, and a surprising lack of low-temperature structural information has prevented further study. Here, we report the powder neutron diffraction data of both phases of Sb 2 O 3 , as well as structural information. α-Sb 2 O 3 behaved as expected, but β-Sb 2 O 3 revealed a small region of zero thermal expansion along the c axis. Additionally, while the β phase matched well with reported atomic displacement parameters, the α phase displayed a marked deviation. This data will enable further investigations into these systems.

36 MATERIALS SCIENCE↗

Precision-controlled ultrafast electron microscope platforms. A case study: Multiple-order coherent phonon dynamics in 1T-TaSe2 probed at 50 fs–10 fm scales

We report on the first detailed beam tests attesting the fundamental principle behind the development of high-current-efficiency ultrafast electron microscope systems where a radio frequency (RF) cavity is incorporated as a condenser lens in the beam delivery system. To allow for the experiment to be carried out with a sufficient resolution to probe the performance at the emittance floor, a new cascade loop RF controller system is developed to reduce the RF noise floor. Temporal resolution at 50 fs in full-width-at-half-maximum and detection sensitivity better than 1% are demonstrated on exfoliated 1T-TaSe2 system under a moderate repetition rate. To benchmark the performance, multi-terahertz edge-mode coherent phonon excitation is employed as the standard candle. The high temporal resolution and the significant visibility to very low dynamical contrast in diffraction signals via high-precision phase-space manipulation give strong support to the working principle for the new high-brightness femtosecond electron microscope systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavefront Preservation in Soft X-Ray Beamlines for the Advanced Light Source Upgrade

In the 4th generation of X-ray light sources, including Free-Electron Lasers (FEL) and Diffraction-Limited Storage Rings (DLSR), the emittance of the electron beam is small or negligible compared to the emittance of the photon beam produced by insertion devices, thus generating coherent beams of light. Over the next few years, several lightsource facilities will be built or upgraded to produce X-ray beams of unprecedented coherent flux. Delivering these exceptional beams to the sample chambers requires beamline optical systems that are designed to preserve the wavefront properties. Our goal in the Advanced Light Source upgrade project (ALS-U) is to create a new class of beamlines that reach diffraction-limited X-ray optical quality through tightly integrated, efficient optical systems, diagnostics, and adaptive mirrors, thus providing users with new scientific capabilities offered by coherent X-ray light interactions with matter. Herein we describe aspects of the beamlines’ design as they enter the project’s final design phase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In-situ fabrication and transport properties of (111) Y 2 Ir 2 O 7 epitaxial thin film

We report on the successful fabrication of (111) oriented thin films of pyrochlore iridate Y 2 Ir 2 O 7 by means of solid phase epitaxy. Essentially, we developed an entirely in situ annealing protocol, which is superior to the conventional ex-situ routine that requires multi-hour annealing to stabilize the proper pyrochlore structure. The morphological quality of the films has been confirmed by x-ray diffraction, reflectivity, and reciprocal space mapping, demonstrating their high crystallinity with a pure pyrochlore phase and an expected epitaxial relation to the substrate. Strikingly, below the magnetic phase transition, the temperature dependence of resistivity shows a power-law behavior with the power exponent of similar to 3/2, characteristic of a Weyl semimetal in the presence of impurities and electron-electron correlations. Finally, below 10K, the magneto-transport measurements reveal the emergence of a non-saturated negative magnetoresistance up to 9T with a small "valley" around zero field. These findings are further interpreted in relation to the weak anti-localization effect and the non-collinear antiferromagnetic ordering on the Ir sublattice.

36 MATERIALS SCIENCE↗

Capturing Ring Opening in Photoexcited Enolic Acetylacetone upon Hydrogen Bond Dissociation by Ultrafast Electron Diffraction

Photoinduced biological and chemical reactions are often based on key structural transformations of a molecule driven across multiple electronic states. Acetylacetone (AcAc) is a prototypical system for complex chemical pathways involving several conical intersections (CI) and singlet–triplet intersystem crossings (ISC) characterized by distinct geometries. In the gas phase, AcAc is predominantly in a planar ring-like enolic form stabilized by a strong intramolecular O–H···O hydrogen bond. Following excitation into the S 2 (ππ*) state at 266 nm, acetylacetone undergoes rapid internal conversion followed by intersystem crossing. Such relaxation pathways are associated with structural changes including ring opening, deplanarization, and bond elongation. In this work, ultrafast electron diffraction (UED) at the SLAC MeV-UED setup is employed as a direct structural probe with a time resolution of 160 fs. Together with trajectory surface hopping simulations, analysis of the UED data provides a new perspective on the early time nuclear dynamics in acetylacetone. Specifically, AcAc is observed to undergo ring opening, deplanarization, and bond elongation all within the first 700 fs after photoexcitation. The monitored dynamics is associated mainly with the nuclear motion on the S 1 potential energy surface, formed after very rapid transfer from S 2 to S 1 , allowing AcAc to reach the conical intersection to intersystem crossing. Such time scales of nuclear motion are contrasted with the time scales of electronic transitions in AcAc that were previously characterized with spectroscopic methods, specifically internal conversion (<100 fs) and intersystem crossing (∼1.5 ps).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amorphous dispersions of flubendazole in hydroxypropyl methylcellulose: Formulation stability assisted by pair distribution function analysis

Here, we use X-ray pair distribution function (PDF) analysis applied to high-energy synchrotron X-ray powder diffraction data to evaluate the amorphous solid dispersions interactions and their aging stability. The obtained systems are based on hydroxypropyl methylcellulose (hypromellose) derivatives and flubendazole (FBZ) drug dispersions prepared using a spray-dryer technique. We carry out stability studies under aging parameters (40 °C/75% relative humidity) to tune the systems’ recrystallization. The results reveal that ion-base interactions between the drug-polymer matrix are responsible for reducing clustering processes yielding slower recrystallization and different ordering in the hypromellose phthalate (HPMCP/FBZ) and hypromellose acetate succinate (HPMC-AS/FBZ) systems and complete drug clustering in hypromellose (HPMC-E3/FBZ). The structural ordering was accessed using differential X-ray PDFs that revealed the region between 3.5 Å and 5.0 Å could be related to FBZ intermolecular interactions and is more ordered for the least stable system (HPMC-E3/FBZ) and less ordered for the most stable system (HPMCP/FBZ). These results show that the ion-base interactions between drug and matrix occur at these intermolecular distances.

60 APPLIED LIFE SCIENCES↗

Influence of cation species on thermal expansion of Y 2 Si 2 O 7 –Gd 2 Si 2 O 7 solid solutions

Mixtures of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 were synthesized by solid-state reaction at 1600°C and characterized via in situ x-ray diffraction (XRD) to determine their coefficients of thermal expansion (CTE). All solid solutions within the system exhibited the orthorhombic δ-RE 2 Si 2 O 7 (Pna2 1 ) structure. Thermal expansion measurements of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 correlated well with reported values in literature, and all synthesized solid solutions exhibited CTEs between Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 . Generally, there was a slight decrease in CTE exhibited by the materials with increasing Gd 2 Si 2 O 7 content, with Gd 2 Si 2 O 7 having the lowest CTEs and Y 2 Si 2 O 7 the highest CTEs. Here, the decrease in CTE was attributed to stronger bonds of Gd-O over Y-O, as determined by calculated crystal orbital Hamilton populations using density functional theory. However, such differences were very small and crystal structure was the dominating factor in CTE trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗