Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Optimization of the determinant of the Vandermonde matrix and related matrices

Various techniques for interpolation of data, moment matching in stochastic applications and various methods in numerical analysis can be described using Vandermonde matrices. For this reason the properties of the determinant of the Vandermonde matrix and related matrices are interesting. Here the extreme points of the Vandermonde determinant, and related determinants, on some simple surfaces such as the unit sphere are analyzed, both numerically and analytically. Some results are also visualized in various dimensions. The extreme points of the Vandermonde determinant are also related to the roots of certain orthogonal polynomials such as the Hermite polynomials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A fast determination method for transverse relaxation of spin-exchange-relaxation-free magnetometer

We propose a fast and accurate determination method for transverse relaxation of the spin-exchange-relaxation-free (SERF) magnetometer. This method is based on the measurement of magnetic resonance linewidth via a chirped magnetic field excitation and the amplitude spectrum analysis. Compared with the frequency sweeping via separate sinusoidal excitation, our method can realize linewidth determination within only few seconds and meanwhile obtain good frequency resolution. Therefore, it can avoid the drift error in long term measurement and improve the accuracy of the determination. As the magnetic resonance frequency of the SERF magnetometer is very low, we include the effect of the negative resonance frequency caused by the chirp and achieve the coefficient of determination of the fitting results better than 0.998 with 95% confidence bounds to the theoretical equation. The experimental results are in good agreement with our theoretical analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Accurate determination of electronic transport properties of silicon wafers by nonlinear photocarrier radiometry with multiple pump beam sizes

In this paper, photocarrier radiometry (PCR) technique with multiple pump beam sizes is employed to determine simultaneously the electronic transport parameters (the carrier lifetime, the carrier diffusion coefficient, and the front surface recombination velocity) of silicon wafers. By employing the multiple pump beam sizes, the influence of instrumental frequency response on the multi-parameter estimation is totally eliminated. A nonlinear PCR model is developed to interpret the PCR signal. Theoretical simulations are performed to investigate the uncertainties of the estimated parameter values by investigating the dependence of a mean square variance on the corresponding transport parameters and compared to that obtained by the conventional frequency-scan method, in which only the frequency dependences of the PCR amplitude and phase are recorded at single pump beam size. Simulation results show that the proposed multiple-pump-beam-size method can improve significantly the accuracy of the determination of the electronic transport parameters. Comparative experiments with a p-type silicon wafer with resistivity 0.1–0.2 Ω·cm are performed, and the electronic transport properties are determined simultaneously. The estimated uncertainties of the carrier lifetime, diffusion coefficient, and front surface recombination velocity are approximately ±10.7%, ±8.6%, and ±35.4% by the proposed multiple-pump-beam-size method, which is much improved than ±15.9%, ±29.1%, and >±50% by the conventional frequency-scan method. The transport parameters determined by the proposed multiple-pump-beam-size PCR method are in good agreement with that obtained by a steady-state PCR imaging technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of ground and excited state dipole moments via electronic Stark spectroscopy: 5-methoxyindole

The dipole moments of the ground and lowest electronically excited singlet state of 5-methoxyindole have been determined by means of optical Stark spectroscopy in a molecular beam. The resulting spectra arise from a superposition of different field configurations, one with the static electric field almost parallel to the polarization of the exciting laser radiation, the other nearly perpendicular. Each field configuration leads to different intensities in the rovibronic spectrum. With an automated evolutionary algorithm approach, the spectra can be fit and the ratio of both field configurations can be determined. A simultaneous fit of two spectra with both field configurations improved the precision of the dipole moment determination by a factor of two. We find a reduction of the absolute dipole moment from 1.59(3) D to 1.14(6) D upon electronic excitation to the lowest electronically excited singlet state. At the same time, the dipole moment orientation rotates by 54{sup ∘} showing the importance of the determination of the dipole moment components. The dipole moment in the electronic ground state can approximately be obtained from a vector addition of the indole and the methoxy group dipole moments. However, in the electronically excited state, vector addition completely fails to describe the observed dipole moment. Several reasons for this behavior are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous determination of the residual stress, elastic modulus, density and thickness of ultrathin film utilizing vibrating doubly clamped micro-/nanobeams

Measurement of ultrathin film thickness and its basic properties can be highly challenging and time consuming due to necessity of using several very sophisticated devices. Here, we report an easy accessible resonant based method capable to simultaneously determinate the residual stress, elastic modulus, density and thickness of ultrathin film coated on doubly clamped micro-/nanobeam. We show that a general dependency of the resonant frequencies on the axial load is also valid for in-plane vibrations, and the one depends only on the considered vibrational mode. As a result, we found that the film elastic modulus, density and thickness can be evaluated from two measured in-plane and out-plane fundamental resonant frequencies of micro-/nanobeam with and without film under different prestress forces. Whereas, the residual stress can be determined from two out-plane (in-plane) measured consecutive resonant frequencies of beam with film under different prestress forces without necessity of knowing film and substrate properties and dimensions. Moreover, we also reveal that the common uncertainties in force (and thickness) determination have a negligible (and minor) impact on the determined film properties. The application potential of the present method is illustrated on the beam made of silicon and SiO{sub 2} with deposited 20 nm thick AlN and 40 nm thick Au thin films, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using L-shell x-ray spectra to determine conditions of non-local thermal dynamic equilibrium plasmas

K-shell x-ray spectra of Li- to H-like ions have long been used to determine plasma conditions. The ratio of integrated line intensities is used to determine the temperature. At the density of non-local thermal dynamic equilibrium (NLTE) plasmas (ne ≈ 10 21 cm -3 ), the K-shell spectrum is not very sensitive to density. We propose using the L-shell emission of open L-shell ions (C- to Li-like) as an alternative to determine both temperature and density of NLTE plasmas. First, the L-shell models of a mid-Z material need to be verified against the temperatures obtained using a K-shell spectrum of a low-Z material. A buried layer platform is being developed at the OMEGA laser to study the open L-shell spectra of NLTE plasmas of mid-Z materials. Studies have been done using a 250 μm diameter dot composed of a layer of 1200 Å thick Zn between two 600 Å thick layers of Ti, in the center of a 1000 μm diameter, 13 μm thick beryllium tamper. Lasers heat the target from both sides for up to 3 ns. The size of the emitting volume vs time was measured with x-ray imaging (face-on and side-on) to determine the density. The temperature was measured from the Ti K-shell spectra. The use of this platform for the verification of atomic L-shell models is discussed.

36 MATERIALS SCIENCE↗

Crystallographic orientation of uniaxial calcite and dolomite determined using reflection generalized ellipsometry

In this study, using the two-modulator generalized ellipsometry microscope (2-MGEM), it is shown that it is possible to determine the direction of the optic axis of crystallites of the high birefringence materials calcite and dolomite. 2-MGEM measurements are performed in reflection at near-normal incidence, so sample preparation requires only an optically polished surface. For uniaxial materials, the 2-MGEM measures the direction of the fast axis and the diattenuation, which can then be related to the tilt angle of the optic axis with respect to the surface normal once the maximum diattenuation is known. The optical resolution of the present instrument is 4-6 μm, and areas as large as 1 cm 2 can be measured without distortion. Additionally, the 2-MGEM measures the depolarization, which is a measure of the quality of the data. Using this information, an optical pole figure can be determined. The 2-MGEM results are compared with electron backscatter diffraction (EBSD) measurements on the same samples. Lastly, additional standard spectroscopic generalized ellipsometry measurements at a large angle of incidence were performed on single crystal calcite and dolomite to determine the spectroscopic ordinary and extraordinary refractive indices from 220 nm to 850 nm from which the maximum diattenuation can be determined.

36 MATERIALS SCIENCE↗

Determination of positions of optical elements of the human eye

An original method for noninvasive determining the positions of elements of intraocular optics is proposed. The analytic dependence of the measurement error on the optical-scheme parameters and the restriction in distance from the element being measured are determined within the framework of the method proposed. It is shown that the method can be efficiently used for determining the position of elements in the classical Gullstrand eye model and personalised eye models. The positions of six optical surfaces of the Gullstrand eye model and four optical surfaces of the personalised eye model can be determined with an error of less than 0.25 mm. (human eye optics)

60 APPLIED LIFE SCIENCES↗

The cosine-sine decomposition with different-orbitals-for-different-spins determinants

We report the spin decomposition of a spin-contaminated different-orbitals-for-different-spins (DODS) wave function is formulated in terms of the Krylov space of the $\hat{S}^2$ ||operator. The number of determinants that contribute to the various projected spin eigenfunctions vertical | $\psi ; S, M \rangle$ depends on the sparsity of the orbital overlap matrix X between the α and β spatial orbitals. The cosine-sine decomposition (CSD) procedure may be applied to this overlap matrix, and the resulting redundant orbital transformations may be applied to the α and β spatial orbitals. This produces a sparse X' matrix in the transformed basis in which each row or column has either one or two nonzero elements. This sparse X' matrix simplifies the spin-decomposition procedure in three ways:1) it reduces the number of contributing determinants within the Krylov basis functions and within the projected spin functions, 2) it reduces the effective orbital dimension through elimination of the frozen core and frozen virtual orbitals, and 3) it simplifies the spin-decomposition procedure in both the original and transformed bases by limiting the Krylov space dimension. These simplifications all reduce the computational effort for the spin-decomposition process. This procedure is implemented within a string-based DODS determinant formulation and applied to spin projection of unrestricted Hartree-Fock determinants.

unrestricted Hartree-Fock↗

Radiolytic Degradation in Lanthanide/Actinide Separation Ligands–NOPOPO: Radical Kinetics and Efficiencies Determinations

Trivalent lanthanide/actinide separations from used nuclear fuel occurs in the presence radiation fields that degrades the extraction ligands and solvents. Here we have investigated the stability of a new ligand for lanthanide/actinide separation; 2,6-bis[(di(2-ethylhexyl)phosphino)methyl] pyridine N,P,P-trioxide, TEH(NOPOPO). The impact of {gamma}-radiolysis on the distribution ratios for actinide (Am) and Lanthanide (Eu) extraction both in the presence and absence of an acidic aqueous phase by TEH(NOPOPO) was determined. Corresponding reaction rate constants for the two major radicals, hydroxyl and nitrate, were determined for TEH(NOPOPO) in the aqueous phase, with room temperature values of (3.49 {+-} 0.10) x 10{sup 9} and (1.95 {+-} 0.15) x 10{sup 8} M{sup -1} s{sup -1}, respectively. The activation energy for this reaction was found to be 30.2 {+-} 4.1 kJ mol{sup -1}. Rate constants for two analogues (2-methylphosphonic acid pyridine N,P-dioxide and 2,6-bis(methylphosphonic acid) pyridine N,P,P-trioxide) were also determined to assist in determining the major reaction pathways.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ORBIT DETERMINATION OF DOUBLE-LINED SPECTROSCOPIC BINARIES BY FITTING THE REVISED HIPPARCOS INTERMEDIATE ASTROMETRIC DATA

Untill now, the Hipparcos intermediate astrometric data (HIAD) have contributed little to the full orbit determination of double-lined spectroscopic binaries (SB2s). This is because the photocenter of such a binary system is usually not far from the system mass center, and its orbital wobble is generally weak with respect to the accuracy of the HIAD. However, the HIAD have been recently revised and the accuracy is increased by a factor of 2.2 in the total weight. Therefore, it is interesting to see if the revised HIAD can be used in the orbit determination at least for some SB2s. In this paper, we first search the 9th Catalogue of Orbits of Spectroscopic Binaries (S{sub B{sup 9}}) for SB2s with reliable spectroscopic orbital solutions and with periods between 50 days and 3.2 years. This leaves us with 56 systems. The full orbital solutions of these systems are then determined from the HIAD by a highly efficient grid search method developed in this paper. The high efficiency is achieved by reducing the number of nonlinear model parameters to one, and by allowing all parameters to be adjustable within a region centered at each grid point. After a variety of tests, we finally accept orbital solutions of 13 systems. Among these systems, six (HIP 677, 20894, 87895, 95995, 101382, and 111170) are well resolved with reliable interferometric data. Orbital solutions from these data are consistent with our results. The full orbital solutions of the other seven systems (HIP 9121, 17732, 32040, 57029, 76006, 102431, and 116360) are determined for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINING INTERSTELLAR CARBON ABUNDANCES FROM STRONG-LINE TRANSITIONS

Carbon is arguably the most important element in the interstellar medium, yet its abundance in gas and dust is poorly understood due to a paucity of data. We explore the possibility of substantially increasing our knowledge of interstellar carbon by applying and assessing a new method for determining the column density of the dominant ion of interstellar carbon in diffuse neutral lines of sight. The method relies on profile fitting of the strong transition of C II at 1334 A in spectra continuum normalized with stellar models. We apply our method to six sight lines for which the carbon abundance has previously been determined with a weak intersystem absorption transition. Our strong-line method consistently shows a significantly lower gas-phase C abundance than the measurements from the weak lines. This result implies that more carbon could reside in dust than was previously thought. This has implications for dust models, which often suffer from a lack of sufficient carbon to plausibly explain extinction. There is no immediately clear explanation for the difference found between the strong- and weak-line C II determinations, but there are indications that the results from the method presented here have advantages over the weak-line column densities. If this is the case, then the reported oscillator strength for the C II transition at 2325 A may be too small. Our findings further suggest that damping wings modeled with a single absorption component may not produce accurate abundances. This problem could affect a large number of H I abundances determined through absorption line analysis that are reported in the literature.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINATION OF ORBITAL ELEMENTS OF SPECTROSCOPIC BINARIES USING HIGH-DISPERSION SPECTROSCOPY

Orbital elements of 37 single-lined spectroscopic binary systems (SB1s) and 5 double-lined spectroscopic binary systems (SB2s) were determined using high-dispersion spectroscopy. To determine the orbital elements accurately, we carried out precise Doppler shift measurements using the HIgh Dispersion Echelle Spectrograph mounted on the Okayama Astrophysical Observatory 1.88 m telescope. We achieved a radial-velocity precision of {approx}10 m s{sup -1} over seven years of observations. The targeted binaries have spectral types between F5 and K3, and are brighter than the 7th magnitude in the V band. The orbital elements of 28 SB1s and 5 SB2s were determined at least 10 times more precisely than previous measurements. Among the remaining nine SB1s, five objects were found to be single stars, and the orbital elements of four objects were not determined because our observations did not cover the entire orbital period. We checked the absorption lines from the secondary star for 28 SB1s and found that three objects were in fact SB2s.

79 ASTRONOMY AND ASTROPHYSICS↗

The impact of the gas distribution on the determination of dynamical masses of galaxies using unresolved observations

Dynamical mass (M {sub dyn}) is a key property of any galaxy, yet a determination of M {sub dyn} is not straightforward if spatially resolved measurements are not available. This situation occurs in single-dish H I observations of the local universe, but also frequently in high-redshift observations. M {sub dyn} measurements in high-redshift galaxies are commonly obtained through observations of the CO line, the most abundant tracer of the molecular medium. Even though in most cases the CO line width can be determined with reasonable accuracy, a measurement of the size of the emitting region is typically challenging given current facilities. We show how the integrated spectra ('global profiles') of a variety of galaxy models depend on the spatial distribution of the tracer gas as well as its velocity dispersion. We demonstrate that the choice of tracer emission line (e.g., H I tracing extended, 'flat', emission versus CO tracing more compact, 'exponential,' emission) significantly affects the shape of the global profiles. In particular, in the case of high (∼50 km s{sup –1}) velocity dispersions, compact tracers (such as CO) result in Gaussian-like (non-double-horned) profiles, as is indeed frequently seen in high-redshift observations. This leads to significantly different determinations of M {sub dyn} if different distributions of the tracer material ('flat' versus 'exponential') are considered. We determine at which radii the rotation curve reaches the rotation velocity corresponding to the velocity width, and find that for each tracer this happens at a well-defined radius: H I velocity widths typically originate at ∼5 optical scale lengths, while CO velocity widths trace the rotation velocity at ∼2 scale lengths. We additionally explore other distributions to take into account that CO distributions at high redshift likely differ from those at low redshift. Our models, while not trying to reproduce individual galaxies, define characteristic radii that can be used in conjunction with the measured velocity widths in order to define dynamical masses consistent with the assumed gas distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIUS DETERMINATION OF SOLAR-TYPE STARS USING ASTEROSEISMOLOGY: WHAT TO EXPECT FROM THE KEPLER MISSION

For distant stars, as observed by the NASA Kepler satellite, parallax information is currently of fairly low quality and is not complete. This limits the precision with which the absolute sizes of the stars and their potential transiting planets can be determined by traditional methods. Asteroseismology will be used to aid the radius determination of stars observed during NASA's Kepler mission. We report on the recent asteroFLAG hare-and-hounds Exercise no. 2, where a group of 'hares' simulated data of F-K main-sequence stars that a group of 'hounds' sought to analyze, aimed at determining the stellar radii. We investigated stars in the range 9 < V < 15, both with and without parallaxes. We further test different uncertainties in T {sub eff}, and compare results with and without using asteroseismic constraints. Based on the asteroseismic large frequency spacing, obtained from simulations of 4 yr time series data from the Kepler mission, we demonstrate that the stellar radii can be correctly and precisely determined, when combined with traditional stellar parameters from the Kepler Input Catalogue. The radii found by the various methods used by each independent hound generally agree with the true values of the artificial stars to within 3%, when the large frequency spacing is used. This is 5-10 times better than the results where seismology is not applied. These results give strong confidence that radius estimation can be performed to better than 3% for solar-like stars using automatic pipeline reduction. Even when the stellar distance and luminosity are unknown we can obtain the same level of agreement. Given the uncertainties used for this exercise we find that the input log g and parallax do not help to constrain the radius, and that T {sub eff} and metallicity are the only parameters we need in addition to the large frequency spacing. It is the uncertainty in the metallicity that dominates the uncertainty in the radius.

99 GENERAL AND MISCELLANEOUS↗

Condensed matter astrophysics: A prescription for determining the species-specific composition and quantity of interstellar dust using x-rays

We present a newtechnique for determining the quantity and composition of dust in astrophysical environments using<6 keV X-rays.We argue that high-resolution X-ray spectra as enabled by the Chandra and XMM-Newton gratings should be considered a powerful and viable new resource for delving into a relatively unexplored regime for directlydetermining dust properties: composition, quantity, and distribution.We present initial cross section measurements of astrophysically likely iron-based dust candidates taken at the Lawrence Berkeley National Laboratory Advanced Light Source synchrotron beamline, as an illustrative tool for the formulation of our technique for determining the quantity and composition of interstellar dust with X-rays. (Cross sections for the materials presented here will be made available for astrophysical modeling in the near future.) Focused at the 700 eV Fe LIII and LII photoelectric edges, we discuss a technique for modeling dust properties in the soft X-rays using L-edge data to complement K-edge X-ray absorption fine structure analysis techniques discussed by Lee& Ravel. The paper is intended to be a techniques paper of interest and useful to both condensed matter experimentalists andastrophysicists. For the experimentalists, we offer a new prescription for normalizing relatively low signal-to-noise ratio L-edge cross section measurements. For astrophysics interests, we discuss the use of X-ray absorption spectra for determining dust composition in cold and ionized astrophysical environments and a new method for determining species-specific gas and dust ratios. Possible astrophysical applications of interest, including relevance to Sagittarius A*, are offered. Prospects for improving on this work in future X-ray missions with higher throughput and spectral resolution are also presented in the context of spectral resolution goals for gratings and calorimeters, for proposed and planned missions such as Astro-H and the International X-ray Observatory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE ARAUCARIA PROJECT. A DISTANCE DETERMINATION TO THE LOCAL GROUP SPIRAL M33 FROM NEAR-INFRARED PHOTOMETRY OF CEPHEID VARIABLES

Motivated by an amazing range of reported distances to the nearby Local Group spiral galaxy M33, we have obtained deep near-infrared photometry for 26 long-period Cepheids in this galaxy with the ESO Very Large Telescope. From the data, we constructed period-luminosity relations in the J and K bands which together with previous optical VI photometry for the Cepheids by Macri et al. were used to determine the true distance modulus of M33, and the mean reddening affecting the Cepheid sample with the multiwavelength fit method developed in the Araucaria Project. We find a true distance modulus of 24.62 for M33, with a total uncertainty of {+-}0.07 mag which is dominated by the uncertainty on the photometric zero points in our photometry. The reddening is determined as E(B - V) = 0.19 {+-} 0.02, in agreement with the value used by the Hubble Space Telescope Key Project of Freedman et al. but in some discrepancy with other recent determinations based on blue supergiant spectroscopy and an O-type eclipsing binary which yielded lower reddening values. Our derived M33 distance modulus is extremely insensitive to the adopted reddening law. We show that the possible effects of metallicity and crowding on our present distance determination are both at the 1%-2% level and therefore minor contributors to the total uncertainty of our distance result for M33.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPROVED V I log(gf) VALUES AND ABUNDANCE DETERMINATIONS IN THE PHOTOSPHERES OF THE SUN AND METAL-POOR STAR HD 84937

New emission branching fraction measurements for 836 lines of the first spectrum of vanadium (V I) are determined from hollow cathode lamp spectra recorded with the National Solar Observatory 1 m Fourier transform spectrometer (FTS) and a high-resolution echelle spectrometer. The branching fractions are combined with recently published radiative lifetimes from laser-induced fluorescence measurements to determine accurate absolute atomic transition probabilities for the 836 lines. The FTS data are also used to extract new hyperfine structure A coefficients for 26 levels of neutral vanadium. These new laboratory data are applied to determine the V abundance in the Sun and metal-poor star HD 84937, yielding log ε(V) = 3.956 ± 0.004 (σ = 0.037) based on 93 V I lines and log ε(V) = 1.89 ± 0.03 (σ = 0.07) based on nine V I lines, respectively, using the Holweger-Müller 1D model. These new V I abundance values for the Sun and HD 84937 agree well with our earlier determinations based upon V II.

79 ASTRONOMY AND ASTROPHYSICS↗