Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deposit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Black Carbon Aerosol Deposition Study (BCADS) Field Campaign Report

Black carbon (BC) absorbs incident solar radiation, perturbs temperature gradients in the atmosphere, and indirectly impacts cloud formation and optical properties (Koch and Del Genio 2010). Deposition of BC to snow and ice surfaces alters albedo and enhances snow melt (Hansen and Nazarenko 2004; Flanner et al., 2007). The impact of BC on regional and global climates through these processes depends on its atmospheric concentration, and thus on the relative rates of emission and loss. Combustion of fossil fuels and biofuel, biomass burning, and wildfires are major sources of BC (Bond et al., 2004). Significant sinks include wet and dry deposition. Wet deposition occurs through scavenging by cloud droplets, ice crystals, and precipitation, while dry deposition refers to the direct removal of particles in the atmosphere to planetary surfaces (e.g., plant, soil, ocean, ice surfaces). Bond et al. (2013) and references therein have focused on the source, aging, and optical properties of BC, while deposition components of the BC lifecycle remain poorly constrained. This is predominantly due to the lack of observations of both total aerosol and BC deposition. Removal rates of refractory and non-refractory sub-micron aerosol by wet and dry deposition are one of the most uncertain aspects of modelling cloud condensation nuclei (CCN; Lee et al., [2013]). BC is an ideal tracer for particle deposition because it is non-volatile and effectively chemically inert, though it can become mixed with other species in the atmosphere. Unlike other aerosol species, BC remains ‘intact’ in water and has no confounding gas-phase contribution to precipitation measurements, and can thus be used to examine the relative importance of wet and dry deposition. Thus, measurements of BC deposition are not only essential for constraining BC sinks and atmospheric lifetime, but also useful for investigating aerosol deposition more broadly.

Southern Great Plains, black carbon, aerosols, sin↗

Modeling the Effect of Evaporative Flux and Colloidal Aggregation on Crud Deposition

During the last few years lot of research has been conducted to investigate and predict the Crud deposition in PWRs. One of the common findings of various experimental and computational studies is that thickness or amount of crud deposits is directly related to evaporative flux maps. Evaporation driven deposition profile on the surfaces takes different forms, i.e. from ring to disk shapes during initial stages and in the form of porous to impervious continuous layers covering the hot fuel surface at the later stages. The amount and thickness of these deposits although are directly related to evaporative flux, the relationship is much complex and can be dependent upon several other factors. A popular problem relating evaporative flux to particulate deposition has been well studied in the form of drying of sessile colloidal drops. It was proposed that, this phenomenon is due to a geometrical constraint: the free surface, constrained by a pinned contact line squeezes the fluid outwards to compensate for evaporative losses and thereby transporting particles to the contact line. Later on a quantitative relationship between evaporative flux and deposition rate was proposed and validated by the same group, which showed power-law relationship. Deposition studies conducted with controlled concentration of particles with subcooled nucleate boiling also showed a power-law relationship rather than a simpler linear relationship whereas physics of evaporation would tend to concentrate particles at linear rate. In a typical subcooled nucleate boiling system, bubble growth and departure time is of the order 1-2 ms, measured experimentally. Diffusion time constant for dilute spherical metallic colloids such as crud particulates, generally present as particulate in process piping, range from 0.0025-2.5 sec in water for a size range 0.1-1.0 μm. Colloidal behavioral characteristics during the growth of bubbles can be computed with escape time constant at collision, which is dependent on effective Hamaker constant. For minimum effective Hamaker constant of Hematite is -2.5 kT and diffusion time constant τ = 0.0025 sec, escape time constant is computed as Kramer rule, τexp[A/kT] magnitude is 0.03 sec or 30 ms. This clearly indicates that evaporation will cause particles to come together and they cannot escape at a fast enough rate which would lead them to form agglomerates. Therefore both effects of evaporative flux in conjunction with the agglomeration kinetics must be considered for modeling the crud deposition if the evaporative flux is known. In this paper, we propose a phenomenological model of colloidal transport and aggregation with evaporative flux. The dynamic of particles interactions while drying of sessile colloidal drops is developed by coupling general transport equation with Smoluchowshki Coagulation equation. Crud deposition on the nuclear fuel has been a serious problem with severe consequences in nuclear power plants. In several studies it has been consistently reported that crud deposition is directly related to evaporative flux on the nuclear fuel surfaces. However, it has not been established how to quantify the deposition rates of crud type particulates if the evaporative flux is known. This complex multiphysics problem is similar to coffee-ring effect, where the governing physics is understood more clearly. In this work, a simplified geometry is used to model the effects of evaporative flux acting at a boundary on the colloidal concentration. The effect of this condition on change in concentration is shown numerically. Further, agglomeration is suspected to play a significant role in high evaporative flux such as bubble nucleation. The coagulation kinetics is modeled using uniform particle distribution and the effective total concentration of colloids including original particles and agglomerates is studied. Once this model is validated with a simple separate effect experiments, it can be integrated to large scale PWR models of evaluating evaporative flux and chemistry models developed by Electrical Power Research Institute (EPRI). (authors)

42 ENGINEERING↗

Reduction of Chemical Reaction Mechanism for Halide Assisted Silicon Carbide Epitaxial Film Deposition

Simulation of gas-phase and surface chemistry is an essential part in numerical study of chemical vapor deposition for film growth. When integrated with a model for transport processes such as gas flow, heat transfer, and mass transfer, it allows the prediction of gas-phase composition, film deposition rate, and film uniformity. For halide-assisted chemical vapor deposition of silicon carbide film growth, three-dimensional simulation of the deposition process can be time-consuming due to the large number of chemical reactions involved. In this study, a simplified chemical reaction mechanism was developed for silicon carbide growth with silicon tetrachloride and propane as precursors. After model validation, the reduced reaction steps were implemented into a three-dimensional simulation of halide-assisted chemical vapor deposition to predict the distributions of gas velocity, temperature, concentration of the intermediate reactants, and film deposition rate. Specifically, the effects of deposition pressure on the film growth were investigated. The integrated model for chemistry and transport process demonstrated the capability of modeling a deposition process with reasonable computing time. We envision that this model will provide a useful tool for design, test, and optimization of the deposition process for growing silicon carbide films or bulk crystals by use of halide-assisted chemical vapor deposition process.

36 MATERIALS SCIENCE↗

Quantifying electron cyclotron power deposition broadening in DIII-D and the potential consequences for the ITER EC system

Abstract The injection of electron cyclotron (EC) waves fulfills a number of important tasks in nuclear fusion devices for which detailed knowledge of the spatial power deposition profile is critical. This deposition profile is commonly determined using forward models such as beam or ray tracing. Recent numerical and experimental studies have shown that small-angle scattering of the EC beam as it passes through the turbulent plasma edge can cause significant broadening of the effective deposition profile, leading to considerable underestimation of the deposition width by forward methods. However, traditional inverse methods to determine the deposition profile from measurements overestimate the deposition profile width due to transport broadening. In this work, we implement three novel methods to resolve the EC power deposition profile from measurements that counteract transport broadening by simultaneously resolving transport and power deposition. We validate their assumptions and compare the results from these methods to the traditional break-in-slope method as well as to the TORAY ray-tracing code in a set of DIII-D discharges spanning five different confinement modes. We show that the four different inverse methods, novel and established, paint a consistent picture of deposition broadening. Specifically, we show that the measured power deposition profile is between 1.6 and 3.6 times wider than the TORAY profiles. Moreover, we show the considerable consequences that this level of broadening can have for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Aerodynamic effects on outer ash deposition rates in second generation atmospheric pressure oxy-coal combustion systems

Recent measurements in scenarios representative of second generation atmospheric pressure oxy-coal combustion systems have shown a significant increase in ash deposition rates in comparison to combustion in air. However, the causative mechanisms behind this increase have not been well understood. To fill this void, well-characterized experiments including fuel and deposit particle size distributions (PSDs) were coupled with highly resolved numerical simulations to isolate the aerodynamic effects impacting the deposition process such that mechanisms could be hypothesized. Three combustion scenarios (AIR, OXY27, OXY70) spanning a factor of three variation in flue gas volumetric flow rates were simulated and the deposition characteristics (impaction rates, deposit PSD, temperature, residence times, capture rates) tracked/predicted using a customized deposition module. The measured deposit PSD was significantly different from the PSD of the parent fuel indicating significant physio-chemical transformations (coalescence and particle growth in particular) at play. The use of simplistic modeling approaches (swelling parameter variations) to model particle growth led to inaccurate deposit ash PSD and rate predictions. A more satisfactory agreement between the measurements and simulations was obtained when the functional form of the parent fuel PSD (spread parameter) was modified to conform closely to the deposit PSD while still ensuring the fidelity of temperature and velocity predictions. Based on the measured ash compositions, identical capture criteria were employed across all three scenarios. Here this study further supports the theory that the ash deposition rates in these systems are dominated by aerodynamic effects with the ash PSD playing a dominant role.

42 ENGINEERING↗

Growth and characterization of Cu3SbSe4 thin films through thermally diffusing Sb2Se3 – CuSe by chemical bath deposition (CBD)

Highlights: • Cu{sub 3}SbSe{sub 4} films were formed by chemical bath deposition followed by a heat treatment. • Prepared Cu{sub 3}SbSe{sub 4} thin films have promising properties to absorbing layer in a solar cell or thermoelectric material. • Electrical conductivity values of Cu{sub 3}SbSe{sub 4} are high, considering its manufacturing method and the previous reports in the field. - Abstract: In the present work, Cu{sub 3}SbSe{sub 4} thin films have been successfully synthesized by chemical bath deposition (CBD) involving a sequential deposition of antimony selenide (Sb{sub 2}Se{sub 3}) and copper selenide (CuSe) films and then annealing in a vacuum atmosphere. The influence of CuSe deposition time on the previously deposited Sb{sub 2}Se{sub 3} films was investigated to obtain the ternary phase. A study of the structural, morphological, optical and electrical properties of these films was carried out using appropriate characterization techniques. X-ray diffraction analysis revealed that the films show a tetragonal crystalline crystalline structure corresponding to the Permingeatite phase (Cu{sub 3}SbSe{sub 4}). The crystal size increases with the CuSe deposition time. It is identified by Raman spectroscopy that at low CuSe deposition times a low concentration of Sb{sub 2}Se{sub 3} coexists in the thin film. The optical band gap energy of these films was evaluated in the range of 0.67–1.18 eV, decreasing by increasing CuSe deposition time. By field-emission scanning electron microscopy (FESEM) a morphological study was carried out, observing that by increasing the deposition time of CuSe there is an increase of agglomerates and decrease the porosity in the samples. An elemental analysis was carried out by energy dispersive X-ray spectroscopy to observe the composition and elemental distribution in the ternary compound. The films showed a p-type electrical conductivity with values between 0.417 and 55.55 (Ω cm{sup −1}). The mobility and carrier density were performed by Hall Effect and Thermoelectric measurements observing a slight increase in the values by increasing the time of CuSe deposition. All results obtained for thin films of Cu{sub 3}SbSe{sub 4} suggest that it could be used as an absorber material in a solar cell or thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On-Demand and Location Selective Particle Assembly via Electrophoretic Deposition for Fabricating Structures with Particle-to-Particle Precision

Here, programmable positioning of 2 μm polystyrene (PS) beads with single particle precision and location selective, “on-demand”, particle deposition was demonstrated by utilizing patterned electrodes and electrophoretic deposition (EPD). An electrode with differently sized hole patterns, from 0.5 to 5 μm, was used to illustrate the discriminatory particle deposition events based on the voltage and particle-to-hole size ratio. With decreasing patterned hole size, a larger electric field was required for a particle deposition event to occur in that hole. For the 5 μm hole, particle deposition began to occur at 10 V/cm where as an electric field of 15 V/cm was required for particles to begin depositing in the 2 μm holes. The likelihood of particle depositions continued to increase for smaller sized holes as the electric field increased. Eventually, a monolayer of particles began to form at approximately 20 V/cm. In essence, a voltage threshold was found for each hole pattern of different sizes, allowing fine adjustments in pattern hole size and voltage to control when a particle deposition event took place, even with the patterns on the same electrode. This phenomenon opens a route toward controlled, multimaterial deposition and assembly onto substrates without repatterning of the electrode or complicated surface modification of the particles. An analytical approach using the theories for electrophoresis and dielectrophoresis found the former to be the dominating force for depositing a particle into a patterned hole. Ebeam lithography was used to pattern spherical holes in precise configurations onto electrode surfaces, where each hole accompanied a polystyrene (PS) particle placement and attachment during EPD. The versatility of e-beam lithography was utilized to create arbitrary pattern configurations to fabricate particle assemblies of limitless configurations, enabling fabrication of unique materials assemblies and interfaces.

36 MATERIALS SCIENCE↗

Sedimentary deposits study of the 2006 Java tsunami, in Pangandaran, West Java (preliminary result)

The 2006 Java Earthquake (Mw 7.2) has generated a tsunami that reached Pangandaran coastal plain with 9.7 m above sea level height of wave. In 2014 we examined the tsunami deposit exposed in shallow trenches along a∼300 m at 5 transect from shoreline to inland on Karapyak and Madasari, Pangandaran. We documented stratigraphically and sedimentologically, the characteristics of Java Tsunami deposit on Karapyak and Madasari and compared both sediments. In local farmland a moderately-sorted, brown soil is buried by a poorly-sorted, grey, medium-grained sand-sheet. The tsunami deposit was distinguished from the underlying soil by a pronounced increase in grain size that becomes finner upwards and landwards. Decreasing concentration of coarse size particles with distance toward inland are in agreement with grain size analysis. The thickest tsunami deposit is about 25 cm found at 84 m from shoreline in Madasari and about 15 cm found at 80 m from shoreline in Karapyak. The thickness of tsunami deposits in some transect become thinner landward but in some other transect lack a consistent suggested strongly affected by local topography. Tsunami deposits at Karapyak and Madasari show many similarities. Both deposits consist of coarse sand that sharply overlies a finer sandy soil. The presence mud drapes and other sedimentary structure like graded bedding, massive beds, mud clasts in many locations shows a dynamics process of tsunami waves. The imbrication coarse and shell fragments of the 2006 Java, tsunami deposits also provide information about the curent direction, allowing us to distinguish run up deposits from backwash deposits.

58 GEOSCIENCES↗

Properties of RF sputtered cadmium telluride (CdTe) thin films: Influence of deposition pressure

Influence of deposition pressure on structural, morphology, electrical and optical properties of CdTe thin films deposited at low substrate temperature (100°C) by RF magnetron sputtering was investigated. The formation of CdTe was confirmed by low angle XRD and Raman spectroscopy. The low angle XRD analysis revealed that the CdTe films have zinc blende (cubic) structure with crystallites having preferred orientation in (111) direction. Raman spectra show the longitudinal optical (LO) phonon mode peak ∼ 165.4 cm{sup -1} suggesting high quality CdTe film were obtained over the entire range of deposition pressure studied. Scanning electron microscopy analysis showed that films are smooth, homogenous, and crack-free with no evidence of voids. The EDAX data revealed that CdTe films deposited at low deposition pressure are high-quality stoichiometric. However, for all deposition pressures, films are rich in Cd relative to Te. The UV-Visible spectroscopy analysis show the blue shift in absorption edge with increasing the deposition pressure while the band gap show decreasing trend. The highest electrical conductivity was obtained for the film deposited at deposition pressure 1 Pa which indicates that the optimized deposition pressure for our sputtering unit is 1 Pa. Based on the experimental results, these CdTe films can be useful for the application in the flexible solar cells and other opto-electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revisiting particle dry deposition and its role in radiative effect estimates

Wet and dry deposition remove aerosols from the atmosphere, and these processes control aerosol lifetime and thus impact climate and air quality. Dry deposition is a significant source of aerosol uncertainty in global chemical transport and climate models. Dry deposition parameterizations in most global models were developed when few particle deposition measurements were available. However, new measurement techniques have enabled more size-resolved particle flux observations. We combined literature measurements with data that we collected over a grassland in Oklahoma and a pine forest in Colorado to develop a dry deposition parameterization. We find that relative to observations, previous parameterizations overestimated deposition of the accumulation and Aitken mode particles, and underestimated in the coarse mode. These systematic differences in observed and modeled accumulation mode particle deposition velocities are as large as an order of magnitude over terrestrial ecosystems. As accumulation mode particles form most of the cloud condensation nuclei (CCN) that influence the indirect radiative effect, this model-measurement discrepancy in dry deposition alters modeled CCN and radiative forcing. We present a revised observationally driven parameterization for regional and global aerosol models. Using this revised dry deposition scheme in the Goddard Earth Observing System (GEOS)-Chem chemical transport model, we find that global surface accumulation-mode number concentrations increase by 62% and enhance the global combined anthropogenic and natural aerosol indirect effect by −0.63 W m −2 . Our observationally constrained approach should reduce the uncertainty of particle dry deposition in global chemical transport models.

54 ENVIRONMENTAL SCIENCES↗

Thermal conductivity of nitride films of Ti, Cr, and W deposited by reactive magnetron sputtering

Nitride films of Ti, Cr, and W were deposited using reactive magnetron sputtering from metal targets in argon and nitrogen plasma. TiN films with (200) orientation were achieved on silicon (100) at the substrate temperature of 500 and 600 °C. The films were polycrystalline at lower temperature. An amorphous interface layer was observed between the TiN film and Si wafer deposited at 600 °C. TiN film deposited at 600 °C showed the nitrogen to Ti ratio to be near unity, but films deposited at lower temperature were nitrogen deficient. CrN film with (200) orientation and good stoichiometry was achieved at 600 °C on Si(111) wafer but the film deposited at 500 °C showed cubic CrN and hexagonal Cr{sub 2}N phases with smaller grain size and amorphous back ground in the x-ray diffraction pattern. An amorphous interface layer was not observed in the cubic CrN film on Si(111) deposited at 600 °C. Nitride film of tungsten deposited at 600 °C on Si(100) wafer was nitrogen deficient, contained both cubic W{sub 2}N and hexagonal WN phases with smaller grain size. Nitride films of tungsten deposited at 500 °C were nonstoichiometric and contained cubic W{sub 2}N and unreacted W phases. There was no amorphous phase formed along the interface for the tungsten nitride film deposited at 600 °C on the Si wafer. Thermal conductivity and interface thermal conductance of all the nitride films of Ti, Cr, and W were determined by transient thermoreflectance technique. The thermal conductivity of the films as function of deposition temperature, microstructure, nitrogen stoichiometry and amorphous interaction layer at the interface was determined. Tungsten nitride film containing both cubic and hexagonal phases was found to exhibit much higher thermal conductivity and interface thermal conductance. The amorphous interface layer was found to reduce effective thermal conductivity of TiN and CrN films.

36 MATERIALS SCIENCE↗

Deposition Behavior of Supersaturated Silicic Acid on the Surfaces of Chlorite and Sericite around Geological Repository - 20138

Around the repository for HLW underground, cementitious materials used for the repository may complicate the migration of radionuclides in the host rock by the alteration of groundwater to a high alkaline condition. Specially, the alkaline groundwater dissolves silicate minerals of host rocks but the plenty of silicic acid dissolved from host rocks in groundwater will become supersaturated and deposit on the surface of flow-paths after decreasing the pH value to about 8 with dispersion and dilution. The deposition of silicic acid is presumed to recover and improve the barrier performance of host rocks for the radionuclide migration because of the narrowing of flow paths and the decrease of the permeability. In this study, the deposition behavior of supersaturated silicic acid was examined by the deposition experiments and the deposition rate constants, k [m/s], were evaluated from the experimental data. As the minerals of the surface of flow-paths, this study focused on chlorite and sericite, hydrothermally-altered minerals distributed to fill fractures of granite. In the experiments, deposition behavior of silicic acid on the powder of chlorite or sericite was observed after the pH of the solution was adjusted to 8 in order to make the silicic acid supersaturated. The solution of CaCl{sub 2} and NaCl were added into a silicic acid to simulate Ca{sup 2+} from the cementitious materials of the repository, Na{sup +} of the saline groundwater in Japan. From the results, the value of k was estimated to be about the order of 10{sup -10}∼10{sup -9} m/s for both chlorite and sericite and the value was almost the same as those for amorphous silica in the previous study. Therefore, the deposition of silicic acid may be assessed by similar apparent deposition rate constants even in actual underground containing various silicate minerals. Moreover, the Damkoehler number which is the dimensionless number expressed by the ratio of characteristic time of mass transfer and chemical reaction was calculated to be 10{sup 4} or more from the value of k. This value shows that the deposition reaction of silicic acid was estimated as much more predominant than the groundwater flow under the situation simulated in this study. These results suggest that the deposition of supersaturated silicic acid on the flow paths composed with various silicate minerals will be able to retard the migration of radionuclides because of narrowing micro flow-paths. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Morphology, microstructure, and doping behaviour: A comparison between different deposition methods for poly-Si/SiO x passivating contacts

In this work, we study how crystallographic structures, optoelectronic properties, and nanoscale surface morphologies of ex situ phosphorus-doped polycrystalline silicon (poly-Si)/SiO x passivating contacts, formed by different deposition methods (sputtering, plasma-enhanced chemical vapour deposition [PECVD], and low-pressure chemical vapour deposition [LPCVD]), are investigated and compared. Across all these deposition technologies, we noted the same trend: higher diffusion temperatures yield films that are more crystalline but that have rougher surface morphologies due to bigger surface crystal grains. Also, the recrystallization process of the as-deposited Si films starts from the SiO x interface, rather than from the film surface and bulk. However, there are some distinct differences among these technologies. First, the LPCVD method yields the lowest deposition rate, roughest surfaces, and smallest degree of crystallinity on finished poly-Si films. In contrast, the PECVD method has the highest deposition rate and smoothest surfaces for both as-deposited Si and annealed poly-Si films. Second, as-deposited sputtered and PECVD Si films contain only an amorphous phase, whereas as-deposited LPCVD films already has some crystalline phase. Third, the LPCVD phosphorus in-diffusion into the substrate depends strongly on the initial film thickness, whereas for the other two methods, it is weakly dependent on thickness. Finally, the passivation quality of every poly-Si film type has different responses to the film thickness and diffusion temperature, suggesting that the ex situ doping optimization should be performed independently.

14 SOLAR ENERGY↗

Behavior of yttria-stabilized zirconia (YSZ) during laser direct energy deposition of an Inconel 625-YSZ cermet

Thermal barrier coatings (TBC) are regularly used today to protect and extend the service life of several superalloys which are extensively used in high temperature applications. The existing TBCs are typically between 0.1 to 0.5 mm in thickness, are deposited on metal substrates using plasma spray or electron beam vapor deposition, and can reduce temperatures at the substrate surface by up to 300 °C. For greater temperature reductions there is a need for thicker TBCs. The building of thick TBCs has to date been stymied by poor adhesion, and cracking during deposition. It has been suggested that a functionally graded approach may reduce the residual stresses which result in these defects. To date there have been few reports on the deposition of ceramic or cermet coatings using laser AM and none have reported on the phase stability of ceramic particles post-deposition. This article is a first report on the phase stability of ceramic particles following the compositional segregation of elements during deposition using a powder feed additive manufacturing process. Functionally graded (FG), thick TBCs (>3 mm) consisting of Inconel 625 (IN625) and yttria-partially stabilized zirconia (8YSZ) were deposited on an A516 steel substrate via laser direct energy deposition (LDED). Good interfaces were observed between the bond coat (BC) and first cermet layer and between the graded cermet layers. However, cermet layers deposited with 10 wt.% or more YSZ developed a thin layer of YSZ on the surface. The thin layer of YSZ greatly hindered additional deposition of new cermet layers. In cermet layers that did exhibit good interfaces, fine, re-solidified, YSZ particles were homogenously distributed within the Inconel 625 matrix. The YSZ particles exhibited a tetragonal lattice structure and were depleted of yttrium. In contrast, the thin YSZ layer formed on a cermet surface showed no yttrium depletion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OVERVIEW OF PARTICLE DEPOSITION MODELS FOR SPENT NUCLEAR FUEL STORAGE SYSTEMS

Deposition models were built to evaluate contaminant deposition on spent nuclear fuel (SNF) canisters. The primary contaminant of concern is chloride, which is dispersed in the atmosphere and then deposits onto the canisters. During dry storage, the primary degradation process is likely to be Chloride Induced Stress Corrosion Cracking (CISCC) at the heat-affected zones of the canister welds. It is known that stainless steel canisters are susceptible to CISCC; however, the rate of chloride deposition onto the canisters is poorly known, based on sparse field data from a small number of sites. The models presented in this study could be useful for determining the rate of deposition on the canisters and the likelihood of CISCC to help with SNF canister ageing management. The deposition models were developed with the commercial computational fluid dynamics (CFD) code STAR-CCM+. Various deposition mechanisms were considered and incorporated into the models, and a sensitivity study was conducted to determine the most important mechanisms for deposition within a SNF storage system. The models included both a vertical and horizontal configuration storage system: NAC International’s Modular, Advanced Generation, Nuclear All-purpose STORage System (MAGNASTOR®) and a NUHOMS® horizontal storage module respectively. The resulting canister deposition on the horizontal canister is visually compared with inspection data taken onsite at the Calvert Cliffs Nuclear Power Plant. These models are preliminary, and development of the models will continue. Future validation exercises are currently being planned, including the Canister Deposition Field Demonstration (CDFD) effort funded by U.S. Department of Energy office of Nuclear Energy office of Spent Fuel Waste Science and Technology. The goal of the modeling presented is to demonstrate a potential modeling technique that could be used to plan and inform SNF canister ageing management programs with predictive models for the timing and occurrence of canister CISCC.

Suffield, Sarah R.↗

Effects of Hot Streak and Phantom Cooling on Heat Transfer in a Cooled Turbine Stage Including Particulate Deposition

The objective of this research effort was to develop a validated computational modeling capability for the characterization of the effects of hot streaks and particulate deposition on the heat load of modern gas turbines. This was accomplished with a multi-faceted approach including analytical, experimental, and computational components. A 1-year no cost extension request was approved for this effort, so the total duration was 4 years. The research effort succeeded in its ultimate objective by leveraging extensive experimental deposition studies complemented by computational modeling. Experiments were conducted with hot streaks, vane cooling, and combinations of hot streaks with vane cooling. These studies contributed to a significant body of corporate knowledge of deposition, in combination with particle rebound and deposition studies funded by other agencies, to provide suitable conditions for the development of a new model. The model includes the following physical phenomena: elastic deformation, plastic deformation, adhesion, and shear removal. It also incorporates material property sensitivity to temperature and tangential-normal velocity rebound cross-dependencies observed in experiments. The model is well-suited for incorporation in CFD simulations of complex gas turbine flows due to its algebraic (explicit) formulation. This report contains model predictions compared to coefficient of restitution data available in the open literature as well as deposition results from two different high temperature turbine deposition facilities. While the model comparisons with experiments are in many cases promising, several key aspects of particle deposition remain elusive. The simple phenomenological nature of the model allows for parametric dependencies to be evaluated in a straightforward manner. This effort also included the first-ever full turbine stage deposition model published in the open literature. The simulations included hot streaks and simulated vane cooling. The new deposition model was implemented into the CFD model as a wall boundary condition, with various particle sizes investigated in the simulation. Simulations utilizing a steady mixing plane formulation and an unsteady sliding mesh were conducted and the flow solution of each was validated against experimental data. Results from each of these simulations, including impact and capture distributions and efficiencies, were compared and potential reasons for differences discussed in detail. The inclusion of a large range of particle sizes allowed investigation of trends with particle size, such as increased radial migration and reduced sticking efficiency at the larger particle sizes. The unsteady simulation predicted lower sticking efficiencies on the rotor blades than the mixing plane simulation for the majority of particle sizes. This is postulated to be due to the preservation of the hot streak and cool vane wake through the vane-rotor interface (which are smeared out circumferentially in the mixing-plane simulation). The results reported here represent the successful implementation of a novel deposition model into validated vane-rotor flow solutions that include a non-uniform inlet temperature profile and simulated vane cooling.

42 ENGINEERING↗

Observational constraints on wet and dry deposition of black carbon to land surfaces (Final Report)

This project focused on providing observational constraints on dry deposition of black carbon and aerosol particles, and the extent to which wet and dry deposition impacts the lifetime of aerosols in the atmosphere. The proposed work tackled the following questions: To what extent dry versus wet deposition controls the removal of BC from the atmosphere, and thus atmospheric BC concentrations? Is BC dry deposition controlled by the same processes as non-refractory aerosol dry deposition? We successfully made eddy covariance flux measurements at the DOE Southern Great Plains site of size-resolved aerosol number fluxes with an ultra high sensitivity aerosol spectrometer (UHSAS) and of black carbon mass and number fluxes using a single particle soot photometer (SP2). We also collected precipitation samples for off-line measurement of rBC using a wet deposition collector. Using these measurements, we identified that wet deposition was the dominant control for black carbon lifetime, but that dry deposition was poorly constrained in models. We developed a new parameterization for particle dry deposition, and applied it to global models to demonstrate the importance of dry deposition in air pollution and radiative effect estimates.

54 ENVIRONMENTAL SCIENCES↗

The evolution of dust deposits in the Martian north polar region

The origin and evolution of two major eolian deposits of the Martian north polar region, the layered deposits and the debris mantle, are examined. Both apparently result from deposition of dust along with the seasonal CO2 frost cap. Dust deposited onto the perennial ice is incorporated into the layered deposits, while dust deposited directly onto the surface becomes part of the debris mantle. Climatically induced fluctuation of the perennial ice margin has influenced the evolution of both units. Periodic exposure to the atmosphere has allowed erosion of curvilinear troughs in the surface of the layered deposits. Intervening periods of deposition may have resulted in gradual poleward migration of the trough forms, leaving behind sets of low-amplitude surface undulations in former trough locations. Advance and retreat of the perennial ice margin has also probably resulted in a fine interfingering of the layered deposits-debris mantle contract. Limited post-depositional stripping of the debris mantle has been accomplished by intense winds blowing outward from the pole.

Squyres, S. W.↗