Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISPLACED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Blade Displacement Measurements of a Rotor in Forward Flight in the Langley 14- by 22-Ft Wind Tunnel

Stereo photogrammetry was used to measure the elastic bending and twist of a three-bladed rotor in forward flight in the NASA Langley 14-by 22-Ft Subsonic Wind Tunnel. The rotor was imaged from below by two cameras mounted at windows of a large turntable in the floor of the test section. At each test condition, the turntable and cameras were rotated and the cameras were triggered to allow measurements over a range of blade azimuth angles. Retro-reflective targets were applied along the leading and trailing edges of the lower surface of each blade. Image blur due to blade motion was minimized by illuminating the targets with high-intensity LED flash lamps mounted next to each camera. The cameras were re-calibrated at each angular position of the turntable using the positions in each image of retro-reflective targets on the ceiling of the test section whose spatial coordinates had been very accurately measured. The blade displacement measurements yielded elastic bending and twist along each blade as functions of blade azimuth, thrust coefficient, and advance ratio, all at a constant rotor angle-of-attack. In addition, the measurements produced estimates of the rigid-body blade pitch, flap, and lag angles.

rotor blade displacement↗

Blade Displacement Measurements of a Rotor in Forward Flight in the Langley 14-by 22-Foot Wind Tunnel

Stereo photogrammetry was used to measure the elastic bending and twist of a three-bladed rotor in forward flight in the NASA Langley 14-by 22-Ft Subsonic Wind Tunnel. The rotor was imaged from below by two cameras mounted at windows of a large turntable in the floor of the test section. At each test condition, the turntable and cameras were rotated and the cameras were triggered to allow measurements over a range of blade azimuth angles. Retro-reflective targets were applied along the leading and trailing edges of the lower surface of each blade. Image blur due to blade motion was minimized by illuminating the targets with high-intensity LED flash lamps mounted next to each camera. The cameras were re-calibrated at each angular position of the turntable using the positions in each image of retro-reflective targets on the ceiling of the test section whose spatial coordinates had been very accurately measured. The blade displacement measurements yielded elastic bending and twist along each blade as functions of blade azimuth, thrust coefficient, and advance ratio, all at a constant rotor shaft angle. In addition, the measurements produced estimates of the rigid-body blade pitch, flap, and lag angles.

rotor↗

Displacement Damage Induced Dark Current and Random Telegraph Signal in P-Type Deep-Trench Pinned Photogates

This study focuses on displacement damage induced dark current and Random Telegraph Signal (RTS) in STMicroelectronics P-Type photogate, a device moving away from the 4T Pinned-Photodiode, with a sensitive volume exclusively made of boron-doped P-type epitaxy, and collecting holes instead of electrons. Results show a typical trend for the shape of dark current and RTS degradation in CMOS Image Sensors with the exception that the measured generation rates seem 2 times smaller than typical literature values in irradiated silicon. Different hypothesis on the origin of this discrepancy are explored.

displacement damage dose↗

On the refinement of time-resolved diffraction data: comparison of the random-distribution and cluster-formation models and analysis of the light-induced increase in the atomic displacement parameters

Expressions for the random-distribution and cluster-formation models for light-induced changes in crystals studied by time-resolved diffraction are presented. The two models can be distinguished on the basis of differences in the predicted intensities. The light-induced increase in the atomic displacement parameters is analyzed with both simulated and experimental data sets.

43 PARTICLE ACCELERATORS↗

On the Origin of Large Interstitial Clusters in Displacement Cascades

Displacement cascades with wide ranges of primary knock-on atom (PKA) energy and mass in iron were simulated using molecular dynamics. New visualisation techniques are introduced to show how the shock-front dynamics and internal structure of a cascade develop over time. These reveal that the nature of the final damage is determined early on in the cascade process. We define a zone (termed 'spaghetti') in which atoms are moved to new lattice sites and show how it is created by a supersonic shock-front expanding from the primary recoil event. A large cluster of self-interstitial atoms can form on the periphery of the spaghetti if a hypersonic recoil creates damage with a supersonic shock ahead of the main supersonic front. When the two fronts meet, the main one injects atoms into the low-density core of the other: these become interstitial atoms during the rapid recovery of the surrounding crystal. The hypersonic recoil occurs in less than 0.1 ps after the primary recoil and the interstitial cluster is formed before the onset of the thermal spike phase of the cascade process. The corresponding number of vacancies is then formed in the spaghetti core as the crystal cools, i.e. at times one to two orders of magnitude longer. By using the spaghetti zone to define cascade volume, the energy density of a cascade is shown to be almost independent of the PKA mass. This throws into doubt the conventional energy-density interpretation of an increased defect yield with increasing PKA mass in ion irradiation.

36 MATERIALS SCIENCE↗

Atomistic Simulations of Displacement Cascades in Fused Silica: It is Compared with Different Concentration of H in the Bulk

Amorphous Silica is one of candidate materials for both final focusing optics of lasers for NIF and future inertial fusion reactors and diagnostics of the Safety and Control Systems of the ITER machine as well as DEMO magnetic fusion reactors. In operation, these materials will be exposed to high neutron irradiation fluxes and it can result in point defect and vary the optical absorption, that is, degradation of the optical properties. In this paper we present molecular dynamic simulation of displacement cascade due to energetic recoils in amorphous silica without hydrogen atoms and with 1% of hydrogen atoms trying to identify defects formation. We have made a statistics of the different kind of defects at different energy of primary knock-on atoms (PKA). The range of studied PKA energies are from 400 eV to 3.5 keV and it is made to both component of this material Silicon and Oxygen. (authors)

36 MATERIALS SCIENCE↗