Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISPERSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The influence of gamma prime on the recrystallization of an oxide dispersion strengthened superalloy - MA 6000E

The requirement of large, recrystallized, highly elongated grains is of primary importance to the development of suitable high temperature properties in oxide dispersion strengthened-superalloys. In the present study the recrystallization behavior of MA 6000E, a recently developed Y2O3 strengthened superalloy produced by mechanical alloying, was examined using transmission and replication microscopy. Gradient and isothermal annealing treatments were applied to extruded and hot rolled products. It was found that conversion from a very fine (0.2 micron) grain structure to a coarse (approximately 10 mm) grain structure is controlled by the dissolution of the gamma prime phase, while grain shape was controlled primarily by the thermal gradient. The fine uniform oxide dispersion appeared to have only a secondary influence in determining the grain shape as columnar grains could be grown transverse to the working direction by appropriate application of the thermal gradient.

Hotzler, R. K.↗
NASA NTRS1982

Mount St. Helens plume dispersion based on trajectory analyses

The major eruption of Mount St. Helens on 18 May 1980, had sufficient energy to traverse the troposphere (9 km above the mountain top) and to penetrate an additional 10 km into the stratosphere. This plume, initially quasi-vertical, rapidly acquired the horizontal momentum of the environmental winds and suffered differential rotation due to a positive speed shear in the troposphere and a negative shear in the stratosphere. Advected rapidly eastward by the undulating jet stream, the lower stratospheric portion of the plume circled the globe at an average speed of approx. 25 m s/l, reentering North America over California in early June. During the same period, the uppermost portion slowly looped over the northwestern United States and then moved westward over the northern Pacific Ocean. Thus, plume dispersion was initiated by the vertical shears of the horizontal winds which converted a nearly vertical plume to a thin, quasi-horizontal, quasi-zonal lamina. Horizontal shears then dispersed the lamina meridionally while small-scale, wave turbulent motions spread it slowly vertically.

Danielsen, E. F.↗
NASA NTRS1982

Preliminary test results of electrical charged particle generator for application to fog dispersal

A charged particle generator for use in fog dispersal applications was built and preliminary tests were carried out. The parameter used as a measure of performance was the current measured with a needle probe positioned in the charged jet connected to ground through an ammeter. The needle was movable and allowed the current profile throughout the jet to be determined. The measured current is referred to as the current output. The major independent parameters were liquid water injection rate, plenum pressure, and corona voltage. Optimum current output was achieved at the approximate pressure of 30 psig, corona voltage of 5600 volts, and liquid water injection rate of 6 cc/min. The results of the test with the prototype charged particle generator clearly demonstrate that a current on the order of 20 microamperes can be routinely achieved with the system. This measurement of current does not necessarily represent the total issuing from the nozzle current which is expected to be larger. From these results, confidence was established that a charged particle generator which will operate continuously and consistently can be designed, constructed, and operated. Further work is required, however, to better understand the physical mechanisms involved and to optimize the system for fog dispersal application.

Frost, W.↗
NASA NTRS1983

Test results of modified electrical charged particle generator for application to fog dispersal

Modifications to a charged particle generator for use in fog dispersal applications were made and additional testing carried out. The modified nozzle, however, did not work as planned, and reported results are the unmodified nozzle. The addition of a positive displacement pump to supply the liquid water was highly successful. Measurements of the generator output current were made with a cylindrical collector system as well as with the needle probe used in previous studies. Measurements with the cylindrical collector and the needle probe showed identical agreement within the variability of the experiment. A high-voltage prove was purchased, and measurements of the corona voltage as well as the voltage variation in the charged particle jet were made. Electric fields in the vertical direction on the order of 1,000,000 v/m were measured. The voltage distribution along the centerline of the jet was compared with the numerical solutions of the Poisson equation and showed very good agreement. Velocity measurements using a pitot tube were made. The resulting measurements were compared with theoretical and other reported experimental results. The measured data showed the appropriate trends and agreed well with reported results. Based on the measured current-to-mass ratio from the charged particle generator, a calculation of the average droplet size was made. Droplet sizes were estimated to range between 0.8 and 0.4 microns. Using measured data, an analysis of the height to which the droplet can be dispersed by the charged particle generator was made. Although the mathematical model is highly simplified, the results indicated that particles would achieve heights on the order of 80 m.

Frost, W.↗
NASA NTRS1982

A dispersion law for solar oscillations

The simple model of p-mode solar oscillations of Liebacher and Stein (1981), in which the acoustic vibrations are trapped in a resonant cavity taking the form of a spherical shell below the solar surface, is compared with Doppler shift observations of vertical velocities. The model is shown to predict a modified dispersion law in which the sound travel time across the cavity is a function of the ratio of the temporal frequency to the horizontal wavenumber, resulting in a single curve when the temporal frequency is plotted against the wavenumber. Frequencies derived from a two-dimensional power spectrum of velocity observations are found to conform to a modified version of the dispersion relation, and that only when the fundamental mode is excluded. Results thus suggest that all modes with the same frequency/wavenumber ratio are trapped in an identical cavity, or, more plausibly, that the difference in upper boundary conditions for different modes has minimal effect on the resulting frequencies.

Duvall, T. L., Jr.↗
NASA NTRS1983

Inverting a dispersive scene's side-scanned image

Consideration is given to the problem of using a remotely sensed, side-scanned image of a time-variant scene, which changes according to a dispersion relation, to estimate the structure at a given moment. Additive thermal noise is neglected in the models considered in the formal treatment. It is shown that the dispersion relation is normalized by the scanning velocity, as is the group scanning velocity component. An inversion operation is defined for noise-free images generated by SAR. The method is extended to the inversion of noisy imagery, and a formulation is defined for spectral density estimation. Finally, the methods for a radar system are used for the case of sonar.

Harger, R. O.↗
NASA NTRS1983

Evaluation of a stochastic model of particle dispersion in a turbulent round jet

A stochastic model of particle dispersion by turbulence, proposed by Gosman and Ioannides (1981), is evaluated. The method employs a k-epsilon model to estimate turbulence properties. Dispersion is determined by computing particle motion, with random sampling to obtain instantaneous flow properties for a statistically significant number of particle trajectories. The stochastic model yields good results particularly when eddy lifetimes are evaluated. The method allows the effects of large relative velocities between the particles and the flow, drag properties at Reynolds numbers greater than the Stokes flow regime, and the variations of local turbulence properties to be readily handled, at least for boundary layer flows.

Shuen, J.-S.↗
NASA NTRS1983

Stability of the surface layer and its relation to the dispersion of primary pollutants in St. Louis

The effects of atmospheric stability on the dispersion of primary pollutants such as CO, total hydrocarbons (THC), and NO were examined in St. Louis. The pollutant levels were measured at 25 stations, temperature at 12 stations at 5 and 30 m height, and wind speed and direction at the 30 m level at 12 stations. Correlation coefficients were generated for pairs of the vertical temperature differences, the log of the mean wind speed reciprocal, the bulk Richardson number, and specific pollutant concentrations. A high correlation was obtained between the thermal stability and the urban concentration of the primary pollutants in the lowest part of the boundary layer. A restricted nighttime dispersion of the pollutants was observed, indicating near-ground increased concentrations at times when the source emissions actually decrease.

Remsberg, E. E.↗
NASA NTRS1984

Relativistic dispersion and the generation of auroral kilometric radiation

Under the conditions at which auroral kilometric radiation (AKR) is known to be produced by a plasma sheet electron region, relativistic effects of the dispersion of extraordinary-mode waves near the electron cyclotron frequency are found to be very significant. The application of linear theory and computer simulation to a model distribution indicates that an extraordinary mode of a particular Reynolds number dominated the radiation emission due to the cyclotron maser instability, suggesting that hot electrons determine the propagation characteristics of AKR and that larger growth rates are possible for direct amplification of extraordinary waves in the auroral region than had been predicted by calculations employing cold plasma dispersion.

Pritchett, P. L.↗
NASA NTRS1983

Surface roughness effects with solid lubricants dispersed in mineral oils

The lubricating effectiveness of solid-lubricant dispersions are investigated in both point and line contacts using surfaces with both random and directional roughness characteristics. Friction and wear data obtained at relatively low speeds and at room temperature, indicate that the existence of solid lubricants such as graphite, MoS2, and PTFE in a plain mineral oil generally will not improve the effectiveness of the oil as a lubricant for such surfaces. Under boundary lubrication conditions, the friction force, as a function of time, initially depends upon the directional roughness properties of the contacting surfaces irrespective of whether the base oil or dispersions are used as lubricants.

Cusano, C.↗
NASA NTRS1985

Ion and electron energy dispersion features detected by ISEE 1

An energy dispersion feature observed by the ISEE 1 medium energy particle instrument is reported. This feature is characterized by enhancements in both electron and ion fluxes which occur in the 20-200 keV energy range and at radial distances from 5 to 13.5 earth radii. There is a strong energy dependence in the onset times of the enhancements. The time period between the first appearance of an enhancement at high energy to its eventual disappearance in the 20 keV channel can be as much as an hour. The duration of the enhancement in a given energy channel decreases with increasing energy. The species and pitch angle of particles in which the feature is most marked depend on local time. It is shown that the feature is a new manifestation of an old phenomenon, the drift dispersion that frequently produces signatures in particle data from geosynchronous satellites.

Greenspan, M. E.↗
NASA NTRS1985

Constraints on short-term mantle rheology from the J2 observation and the dispersion of the 18.6 y tidal Love number

Information derived from data recently acquired from the LAGEOS satellite is used to place some constraints on the rheological parameters of short-term mantle rheology. The validity of Lambeck and Nakiboglu's (1983) rheological model is assessed by formally developing an expression for the transformed shear modulus using a truncated retardation spectrum. This analytical formula is used to show that the parameters of the above mentioned model are not consistent at all with the amount of anelastic dispersion expected in the Chandler wobble and with the attenuation of seismic normal modes. The feasibility of a standard linear solid (SLS) rheology operating over intermediate timescales between 1 and 100 yr is investigated to determine whether the tidal dispersion at 18.6 yr can be explained by this model. An attempt is made to place some constraints on the parameters of the SLS model and the nature of short-term mantle rheology for timescales of less than 100 yr is discussed.

Sabadini, R.↗
NASA NTRS1985

Quantitative study on dispersion relations of TIDs observed by an HF Doppler array

A quantitative study on the dispersion relation of traveling ionospheric disturbances (TIDs) was performed by using data obtained by an HF Doppler array. Observed data at three stations are digitized continuously with a sampling period of 10 sec. A schematic illustration of a running analysis method is given. Fourier components omega's and their wave vectors k's of the TIDs are calculated from these subset data from three stations by means of the cross-spectrum analysis. Diagrams of horizontal trace velocity V sub ph versus wave period T were also obtained. From these diagrams one can see clear cutoff periods of the internal mode of the atmospheric gravity waves. A morphological classification of the mode of the omega - k and V sub ph - T obtained through one year was performed. The estimation of the horizontal velocity vectors of the thermospheric wind form their dispersion relations was performed also. A key point of the method of obtaining the vectors is to estimate the tilt, in azimuthally different omega - k diagrams, of a resonant branch ascribed to the Brunt oscillations.

Tsutsui, M.↗
NASA NTRS1986

Parametric instabilities of the circularly polarized Alfven waves including dispersion

A class of parametric instabilities of large-amplitude, circularly polarized Alfven waves is considered in which finite frequency (dispersive) effects are included. The dispersion equation governing the instabilities is a sixth-order polynomial which is solved numerically. As a function of K identically equal to k/k-sub-0 (where k-sub-0 and k are the wave number of the 'pump' wave and unstable sound wave, respectively), there are three regionals of instability: a modulation instability at K less than 1, a decay instability at K greater than 1, and a relatively weak and narrow instability at K close to squared divided by v-sub-A squared (where c-sub-s and v-sub-A are the sound and Alfven speeds respectively), the modulational instability occurs when beta is less than 1 (more than 1) for left-hand (right-hand) pump waves, in agreement with the previous results of Sakai and Sonnerup (1983). The growth rate of the decay instability of left-hand waves is greater than the modulational instability at all values of beta. Applications to large-amplitude wave observed in the solar wind, in computer simulations, and in the vicinity of planetary and interplanetary collisionless shocks are discussed.

Wong, H. K.↗
NASA NTRS1985

Demonstration of a new method for dispersing warm fogs

Low visibility due to warm fog has caused costly disruptions in the case of aircraft schedules, and fog-related difficulties can arise in connection with Space Shuttle flights. As current methods of fog elimination are not entirely satisfactory, Kelley (1983) has proposed a new brute force procedure for warm fog dispersal. This procedure makes use of recycled water sprays. Fog droplets are removed by coalescence/rainout. Details regarding the involved approaches are described, and a demonstration of the method is discussed. Attention is given to tests conducted in October 1984, visual range improvement in response of water spray fog dispersal, a systematic investigation concerning a selection of firefighting nozzles, and histograms of fog droplet number concentration measured in the spray curtain outflow with a forward scattering spectrometer probe.

Keller, V. W.↗
NASA NTRS1986

Development testing of large volume water sprays for warm fog dispersal

A new brute-force method of warm fog dispersal is described. The method uses large volume recycled water sprays to create curtains of falling drops through which the fog is processed by the ambient wind and spray induced air flow. Fog droplets are removed by coalescence/rainout. The efficiency of the technique depends upon the drop size spectra in the spray, the height to which the spray can be projected, the efficiency with which fog laden air is processed through the curtain of spray, and the rate at which new fog may be formed due to temperature differences between the air and spray water. Results of a field test program, implemented to develop the data base necessary to assess the proposed method, are presented. Analytical calculations based upon the field test results indicate that this proposed method of warm fog dispersal is feasible. Even more convincingly, the technique was successfully demonstrated in the one natural fog event which occurred during the test program. Energy requirements for this technique are an order of magnitude less than those to operate a thermokinetic system. An important side benefit is the considerable emergency fire extinguishing capability it provides along the runway.

Keller, V. W.↗
NASA NTRS1986

Large volume water sprays for dispersing warm fogs

A new method for dispersing of warm fogs which impede visibility and alter schedules is described. The method uses large volume recycled water sprays to create curtains of falling drops through which the fog is processed by the ambient wind and spray-induced air flow; the fog droplets are removed by coalescence/rainout. The efficiency of this fog droplet removal process depends on the size spectra of the spray drops and optimum spray drop size is calculated as between 0.3-1.0 mm in diameter. Water spray tests were conducted in order to determine the drop size spectra and temperature response of sprays produced by commercially available fire-fighting nozzles, and nozzle array tests were utilized to study air flow patterns and the thermal properties of the overall system. The initial test data reveal that the fog-dispersal procedure is effective.

Keller, V. W.↗
NASA NTRS1986

The radial velocity, velocity dispersion, and mass-to-light ratio of the Sculptor dwarf galaxy

The radial velocity, velocity dispersion, and mass-to-light ratio for 16 K giants in the Sculptor dwarf galaxy are calculated. Spectra at the Ca II triplet are analyzed using cross-correlation techniques in order to obtain the mean velocity of + 107.4 + or - 2.0 km/s. The dimensional velocity dispersion estimated as 6.3 (+1.1, -1.3) km/s is combined with the calculated core radius and observed central surface brightness to produce a mass-to-light ratio of 6.0 in solar units. It is noted that the data indicate that the Sculptor contains a large amount of mass not found in globular clusters, and the mass is either in the form of remnant stars or low-mass dwarfs.

Armandroff, T. E.↗