Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIPOLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Nb3Sn cable development for the 11 T dipole demonstation model

Fermilab (FNAL) and CERN have started the development of 11 T 11-m long Nb{sub 3}Sn dipoles to replace a number of LHC NbTi dipoles and free space for cold collimators in the LHC DS areas. An important step in the design of these magnets is the development of the high aspect ratio Nb{sub 3}Sn cable to achieve the nominal field of 11 T at the nominal LHC operating current of 11.85 kA at 1.9 K with 20% margin. Keystoned cables with 40 and 41 strands with and without a stainless steel core were made out of hard Cu wires and Nb{sub 3}Sn RRP strand of 0.7 mm nominal diameter. The cable optimization process was aimed at achieving both mechanical stability and minimal damage to the delicate internal architecture of the Restacked-Rod-Process (RRP) Nb3Sn strands with 127 restack design to be used in the magnet short models. Each cable was characterized electrically for transport properties degradation at high field and for low field stability, and metallographically for internal damage.

43 PARTICLE ACCELERATORS↗

Design and Field Measurements of Printed-Circuit Quadrupoles and Dipoles

Air-core printed-circuit (PC) quadrupoles and dipoles have been developed for the University of Maryland electron ring, currently under construction. The quadrupoles and dipoles are characterized by very small magnetic fields (about 15 G at the aperture edge) and small aspect ratios (length/diameter < 1). We review the theory behind the design of the PC lenses and bending elements, and present general expressions for estimating the values of integrated field and integrated field gradient as functions of design parameters. The new quadrupole magnet represents an improvement over an earlier version which was based on an empirical approach. Further, we summarize the results of multipole content of the magnet fields as measured with a rotating coil apparatus of special construction. The results are compared with calculations with an iron-free magnetics code and are related to different types of errors in the manufacture and assembly of the PC magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development and Fabrication of Nb3Sn Rutherford Cable for the 11 T DS Dipole Demonstration Model

Fermilab and CERN started the development of 11 T 11-m long Nb{sub 3}Sn dipoles to replace few regular LHC NbTi dipoles and free space for cold collimators in LHC DS areas. An important step in the design of these magnets is the development of the high aspect ratio Nb{sub 3}Sn cable to achieve the nominal field of 11 T at the nominal LHC operating current of 11.85 kA with 20% margin. The keystoned cables 14.7 mm wide with and without a stainless steel core were made out of hard Cu wires and Nb{sub 3}Sn RRP strand 0.7 mm nominal diameter. The cable optimization process was aimed at achieving both mechanical stability and minimal damage to the delicate internal architecture of the Restacked-Rod-Process (RRP) Nb{sub 3}Sn strands with 127 restack design to be used in the magnet short models. Each cable was characterized electrically for transport properties degradation at high field and for low field stability, and metallographically for internal damage.

36 MATERIALS SCIENCE↗

Dipole magnet for use of RHIC EBIS HEBT line.

Construction and magnetic field measurement of dipole magnets for RHIC-EBIS HEBT line have completed. These magnets will be used to guide highly charged ion beams ranging from proton to Uranium provided by a new injector toward the Booster ring in BNL. In this paper, overview of the magnetic design of the dipoles and results of magnetic field measurement are summarized.

43 PARTICLE ACCELERATORS↗

The correction of linear lattice gradient errors using an AC dipole

Precise measurement of optics from coherent betatron oscillations driven by ac dipoles have been demonstrated at RHIC and the Tevatron. For RHIC, the observed rms beta-beat is about 10%. Reduction of beta-beating is an essential component of performance optimization at high energy colliders. A scheme of optics correction was developed and tested in the RHIC 2008 run, using ac dipole optics for measurement and a few adjustable trim quadruples for correction. In this scheme, we first calculate the phase response matrix from the. measured phase advance, and then apply singular value decomposition (SVD) algorithm to the phase response matrix to find correction quadruple strengths. We present both simulation and some preliminary experimental results of this correction.

43 PARTICLE ACCELERATORS↗

Nonlinear dynamics studies in the Fermilab tevatron using an AC dipole

An AC dipole magnet produces a sinusoidally oscillating dipole field with frequency close to betatron frequency and excites large sustained oscillations of beam particles circulating in a synchrotron. Observation of such oscillations with beam position monitors allows direct measurements of a synchrotron's nonlinear parameters. This paper presents experimental studies to measure perturbative effects of sextupole and octupole fields, performed in the Fermilab Tevatron using an ACdipole.

43 PARTICLE ACCELERATORS↗

Assembly and Test of HD2, a 36 mm bore high field Nb3Sn Dipole Magnet

We report on the fabrication, assembly, and test of the Nb{sub 3}Sn dipole magnet HD2. The magnet, aimed at demonstrating the application of Nb{sub 3}Sn superconductor in high field accelerator-type dipoles, features a 36 mm clear bore surrounded by block-type coils with tilted ends. The coil design is optimized to minimize geometric harmonics in the aperture and the magnetic peak field on the conductor in the coil ends. The target bore field of 15 T at 4.3 K is consistent with critical current measurements of extracted strands. The coils are horizontally pre-stressed during assembly using an external aluminum shell pre-tensioned with water-pressurized bladders. Axial pre-loading of the coil ends is accomplished through two end plates and four aluminum tension rods. The strain in coil, shell, and rods is monitored with strain gauges during assembly, cool-down and magnet excitation, and compared with 3D finite element computations. Magnet's training performance, quench locations, and ramp-rate dependence are then analyzed and discussed.

43 PARTICLE ACCELERATORS↗

Test Results of HD2, A High Field Nb3Sn Dipole with A 36 MM Bore

The Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) has developed the 1 m long Nb{sub 3}Sn dipole magnet HD2. With tilted (flared) ends to avoid obstructing a 36 mm clear bore, HD2 represents a step towards the use of block-type coils in high-field accelerator magnets. The coil design has been optimized to minimize geometric harmonics and reduce the conductor peak field in the end region, resulting in an expected short sample dipole field of 15 T. The support structure is composed by an external aluminum shell pre-tensioned with pressurized bladders and interference keys, and by two stainless steel end plates compressing the coil ends through four aluminum axial rods. We report on magnet design, assembly, and test results, including training performance, quench locations, and strain gauge measurements.

43 PARTICLE ACCELERATORS↗

Dynamically tuned high-Q AC-dipole implementation

AC-dipole magnets are typically implemented as a parallel LC resonant circuit. To maximize efficiency, it's beneficial to operate at a high Q. This, however, limits the magnet to a narrow frequency range. Current designs therefore operate at a low Q to provide a wider bandwidth at the cost of efficiency. Dynamically tuning a high Q resonant circuit tries to maintain a high efficiency while providing a wide frequency range. The results of ongoing efforts at BNL to implement dynamically tuned high-Q AC dipoles will be presented.

43 PARTICLE ACCELERATORS↗

Bound states for an induced electric dipole in the presence of an azimuthal magnetic field and a disclination

Based on the Wei-Han-Wei setup [H. Wei, R. Han, and X. Wei, Phys. Rev. Lett. 75, 2071 (1995)], where a neutral particle with an induced electric dipole moment interacts with a configuration of crossed electric and magnetic fields, in this paper we study the bound states that arise when we change the Wei-Han-Wei field configuration and consider a field configuration of crossed azimuthal magnetic field and a radial electric field. Moreover, we consider here a spin-half neutral particle and the presence of a linear topological defect called disclination. We obtain the bound states in two distinct cases: in the first case, we consider that the wave function of the neutral particle is well-behaved at the origin and vanishes at the asymptotic limit; in the second case, we consider the neutral particle confined to a parabolic potential like a quantum dot.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A meridional dipole in premonsoon Bay of Bengal tropical cyclone activity induced by ENSO

Analysis of Bay of Bengal tropical cyclone (TC) track data for the months of May–June during 1979–2014 reveals a meridional dipole in TC intensification: TC intensification rates increased significantly in the northern region and decreased in the southern region. The dipole is consistent with changes in the large–scale TC environment estimated using the Genesis Potential Index (GPI) for the same period. While an increase in lower troposphere cyclonic vorticity and midtroposphere humidity in the northern Bay of Bengal made the environment more favorable for TC intensification, enhanced vertical wind shear in the southern Bay of Bengal tended to reduce TC development. Furthermore, these environmental changes were associated with a strengthening of the monsoon circulation for the months of May–June, driven by a La Niña–like shift in tropical Pacific SSTs and associated tropical wave dynamics. Finally, analysis of a suite of climate models from the Coupled Model Intercomparison Project Phase 5 archive shows that most models correctly reproduce the link between ENSO and premonsoon Bay of Bengal TC activity at interannual timescales, demonstrating the robustness of our main conclusions.

54 ENVIRONMENTAL SCIENCES↗

Common-Coil Dipole for a Very Large Hadron Collider [Book Chapter]

A dipole magnet based on the common-coil design and pre-reacted Nb$_{3}$Sn cable was developed at the Fermi National Accelerator Laboratory (FNAL) for a Very Large Hadron Collider. Three technological racetrack models and a short dipole model have been fabricated and tested. This chapter summarizes the main results of this program.

43 PARTICLE ACCELERATORS↗

Electric dipole moments in a leptoquark scenario for the B-physics anomalies

Vector leptoquarks can address the lepton flavor universality anomalies in decays associated with the b → cℓν and b → sℓℓ transitions, as observed in recent years. While not required to explain the anomalies, these leptoquarks generically yield new sources of CP violation. In this paper, we explore constraints and discovery potential for electric dipole moments (EDMs) in leptonic and hadronic systems. We provide the most generic expressions for dipole moments induced by vector leptoquarks at one loop. We find that O(1) CP-violating phases in tau and muon couplings can lead to corresponding EDMs within reach of next-generation EDM experiments, and that existing bounds on the electron EDM already put stringent constraints on CP-violating electron couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Goldstone bosons and fluctuating hydrodynamics with dipole and momentum conservation

We develop a Schwinger-Keldysh effective field theory describing the hydrodynamics of a fluid with conserved charge and dipole moments, together with conserved momentum. The resulting hydrodynamic modes are highly unusual, including sound waves with quadratic (magnon-like) dispersion relation and subdiffusive decay rate. Hydrodynamics itself is unstable below four spatial dimensions. We show that the momentum density is, at leading order, the Goldstone boson for a dipole symmetry which appears spontaneously broken at finite charge density. Unlike an ordinary fluid, the presence or absence of energy conservation qualitatively changes the decay rates of the hydrodynamic modes. This effective field theory naturally couples to curved spacetime and background gauge fields; in the flat spacetime limit, we reproduce the “mixed rank tensor fields” previously coupled to fracton matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electric dipole moment constraints on CP-violating heavy-quark Yukawas at next-to-leading order

Electric dipole moments are sensitive probes of new phases in the Higgs Yukawa couplings. We calculate the complete two-loop QCD anomalous dimension matrix for the mixing of CP-odd scalar and tensor operators and apply our results for a phenomenological study of CP violation in the bottom and charm Yukawa couplings. We find large shifts of the induced Wilson coefficients at next-to-leading-logarithmic order. Using the experimental bound on the electric dipole moments of the neutron and mercury, we update the constraints on CP-violating phases in the bottom and charm quark Yukawas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probing top-Z dipole moments at the LHC and ILC

We investigate the weak electric and magnetic dipole moments of top quark-Z boson interactions at the Large Hadron Collider (LHC) and the International Linear Collider (ILC). Their vanishingly small magnitude in the Standard Model makes these couplings ideal for probing New Physics interactions and for exploring the role of top quarks in electroweak symmetry breaking. In our analysis, we consider the production of two top quarks in association with a Z boson at the LHC, and top quark pairs mediated by neutral gauge bosons at the ILC. These processes yield direct sensitivity to top quark-Z boson interactions and complement indirect constraints from electroweak precision data. Our computation is accurate to next-to-leading order in QCD, we include the full decay chain of top quarks and the Z boson, and account for theoretical uncertainties in our constraints. Furthermore, we find that LHC experiments will soon be able to probe weak dipole moments for the first time.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct ab initio calculation of the 4 He nuclear electric dipole polarizability

The calculation of nuclear electromagnetic sum rules by directly diagonalizing the nuclear Hamiltonian in a large basis is numerically challenging and has not been performed for A>2 nuclei. With the significant progress of high performance computing, we show that calculating sum rules using numerous discretized continuum states obtained by directly diagonalizing the ab initio no-core shell model Hamiltonian is achievable numerically. Specifically, we calculate the 4 He electric dipole (E1) polarizability, that is an inverse energy weighted sum rule, employing the Daejeon16 NN interaction. We demonstrate that the calculations are numerically tractable as the dimension of the basis increases and are convergent. Our results for the 4 He electric dipole polarizability are consistent with the most recent experimental data and are compared with those of other theoretical studies employing different techniques and various interactions.

Astronomy & Astrophysics↗

Energy alignment manipulation at the C 60 /TiO 2 (110) interface using a blanket molecular dipole approach

In this work, modifying the energy alignment between the frontier levels of a chromophore and the band edges of a semiconductor substrate using a “blanket layer” of molecular dipoles is explored. The electronic structure, measured with ultraviolet and x-ray photoemission spectroscopy, of C 60 deposited directly onto the TiO 2 (110) surface is compared with that of C 60 deposited onto the surface covered by a blanket layer of the custom-designed helical peptide Z-(Aib) 6 -Ipa, which has a large dipole moment of 18.6 D oriented along its molecular axis and pointing toward the substrate. The C 60 HOMO level is shifted 600 meV to deeper binding energy in the presence of the blanket layer, in good agreement with what is expected from a simple parallel plate capacitor model. These results demonstrate a simple and versatile strategy for controlling energy level alignment at organic/inorganic interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗