Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DECOMPOSITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Combustion of Organic Molecules by the Thermal Decomposition of Perchlorate Salts: Implications for Organics at the Mars Phoenix Scout Landing Site

The Mars 2007 Phoenix Scout Mission successfully landed on May 25, 2008 and operated on the northern plains of Mars for 150 sols. The primary mission objective was to study the history of water and evaluate the potential for past and present habitability in Martian arctic ice-rich soil [1]. Phoenix landed near 68 N latitude on polygonal terrain created by ice layers that are a few centimeters under loose soil materials. The Phoenix Mission is assessing the potential for habitability by searching for organic molecules in the ice or icy soils at the landing site. Organic molecules are necessary building blocks for life, although their presence in the ice or soil does not indicate life itself. Phoenix searched for organic molecules by heating soil/ice samples in the Thermal and Evolved-Gas Analyzer (TEGA, [2]). TEGA consists of 8 differential scanning calorimeter (DSC) ovens integrated with a magnetic-sector mass spectrometer with a mass range of 2-140 daltons [2]. Endothermic and exothermic reactions are recorded by the TEGA DSC as samples are heated from ambient to ~1000 C. Evolved gases, including any organic molecules and their fragments, are simultaneously measured by the mass spectrometer during heating. Phoenix TEGA data are still under analysis; however, no organic fragments have been identified to date in the evolved gas analysis (EGA). The MECA Wet Chemistry Lab (WCL) discovered a perchlorate salt in the Phoenix soils and a mass 32 peak evolved between 325 and 625 C for one surface sample dubbed Baby Bear [3]. The mass 32 peak is attributed to evolved O2 generated during the thermal decomposition of the perchlorate salt. Perchlorates are very strong oxidizers when heated, so it is possible that organic fragments evolved in the temperature range of 300-600 C were combusted by the O2 released during the thermal decomposition of the perchlorate salt. The byproduct of the combustion of organic molecules is CO2. There is a prominent release of CO2 between 200-600 C for several of the Phoenix soils analyzed by TEGA. This low temperature release of CO2 might be any combination of 1) desorption of adsorbed CO2, 2) thermal decomposition of Fe- and Mg-carbonates, and 3) combustion of organic molecules [2].

Ming, D.W.↗

Thermal Decomposition of an Impure (Roxbury) Siderite: Relevance to the Presence of Chemically Pure Magnetite Crystals in ALH84001 Carbonate Disks

The question of the origin of nanophase magnetite in Martian meteorite ALH84001 has been widely debated for nearly a decade. Golden et al. have reported producing nearly chemically pure magnetite from thermal decomposition of chemically impure siderite [(Fe, Mg, Mn)CO3]. This claim is significant for three reasons: first, it has been argued that chemically pure magnetite present in the carbonate disks in Martian meteorite ALH84001 could have formed by the thermal decomposition of the impure carbonate matrix in which they are embedded; second, the chemical purity of magnetite has been previously used to identify biogenic magnetite; and, third, previous studies of thermal decomposition of impure (Mg,Ca,Mn)-siderites, which have been investigated under a wide variety of conditions by numerous researchers, invariably yields a mixed metal oxide phase as the product and not chemically pure magnetite. The explanation for this observation is that these siderites all possess the same crystallographic structure (Calcite; R3c) so solid solutions between these carbonates are readily formed and can be viewed on an atomic scale as two chemically different but structurally similar lattices.

McKay, D.S.↗

Isothermal Decomposition of Hydrogen Peroxide Dihydrate

We present a new method of growing pure solid hydrogen peroxide in an ultra high vacuum environment and apply it to determine thermal stability of the dihydrate compound that forms when water and hydrogen peroxide are mixed at low temperatures. Using infrared spectroscopy and thermogravimetric analysis, we quantified the isothermal decomposition of the metastable dihydrate at 151.6 K. This decomposition occurs by fractional distillation through the preferential sublimation of water, which leads to the formation of pure hydrogen peroxide. The results imply that in an astronomical environment where condensed mixtures of H2O2 and H2O are shielded from radiolytic decomposition and warmed to temperatures where sublimation is significant, highly concentrated or even pure hydrogen peroxide may form.

Loeffler, M. J.↗

A Structural Model Decomposition Framework for Systems Health Management

Systems health management (SHM) is an important set of technologies aimed at increasing system safety and reliability by detecting, isolating, and identifying faults; and predicting when the system reaches end of life (EOL), so that appropriate fault mitigation and recovery actions can be taken. Model-based SHM approaches typically make use of global, monolithic system models for online analysis, which results in a loss of scalability and efficiency for large-scale systems. Improvement in scalability and efficiency can be achieved by decomposing the system model into smaller local submodels and operating on these submodels instead. In this paper, the global system model is analyzed offline and structurally decomposed into local submodels. We define a common model decomposition framework for extracting submodels from the global model. This framework is then used to develop algorithms for solving model decomposition problems for the design of three separate SHM technologies, namely, estimation (which is useful for fault detection and identification), fault isolation, and EOL prediction. We solve these model decomposition problems using a three-tank system as a case study.

Roychoudhury, Indranil↗

Synthesis, Decomposition and Characterization of Fe and Ni Sulfides and Fe and CO Nanoparticles for Aerospace Applications

We describe several related studies where simple iron, nickel, and cobalt complexes were prepared, decomposed, and characterized for aeronautics (Fischer-Tropsch catalysts) and space (high-fidelity lunar regolith simulant additives) applications. We describe the synthesis and decomposition of several new nickel dithiocarbamate complexes. Decomposition resulted in a somewhat complicated product mix with NiS predominating. The thermogravimetric analysis of fifteen tris(diorganodithiocarbamato)iron(III) has been investigated. Each undergoes substantial mass loss upon pyrolysis in a nitrogen atmosphere between 195 and 370 C, with major mass losses occurring between 279 and 324 C. Steric repulsion between organic substituents generally decreased the decomposition temperature. The product of the pyrolysis was not well defined, but usually consistent with being either FeS or Fe2S3 or a combination of these. Iron nanoparticles were grown in a silica matrix with a long-term goal of introducing native iron into a commercial lunar dust simulant in order to more closely simulate actual lunar regolith. This was also one goal of the iron and nickel sulfide studies. Finally, cobalt nanoparticle synthesis is being studied in order to develop alternatives to crude processing of cobalt salts with ceramic supports for Fischer-Tropsch synthesis.

Cowen, Jonathan E.↗

The Relative Importance of Methanogenesis in the Decomposition of Organic Matter in Northern Peatlands

Using an isotope-mass balance approach and assuming the equimolar production of CO2 and CH4 from methanogenesis (e.g., anaerobic decomposition of cellulose), we calculate that the proportion of total CO2 production from methanogenesis varies from 37 to 83% across a variety of northern peatlands. In a relative sense, methanogenesis was a more important pathway for decomposition in bogs (80 +/- 13% of CO2 production) than in fens (64 +/- 5.7% of CO2 production), but because fens contain more labile substrates they may support higher CH4 production overall. The concentration of CO2 produced from methanogenesis (CO2-meth) can be considered equivalent to CH4 concentration before loss due to ebullition, plant-mediated transport, or diffusion. Bogs produced slightly less CO2-meth than fens (2.9 +/- 1.3 and 3.7 +/- 1.4 mmol/L, respectively). Comparing the quantity of CH4 present to CO2-meth, fens lost slightly more CH4 than bogs (89 +/- 2.8% and 82 +/- 5.3%, respectively) likely due to the presence of vascular plant roots. In collapsed permafrost wetlands, bog moats produced half the amount of CO2-meth (0.8 +/- 0.2mmol/L) relative to midbogs (1.6 +/- 0.6 mmol/L) and methanogenesis was less important (42 +/- 6.6% of total CO2 production relative to 55 +/- 8.1%).We hypothesize that the lower methane production potential in collapsed permafrost wetlands occurs because recently thawed organic substrates are being first exposed to the initial phases of anaerobic decomposition following collapse and flooding. Bog moats lost a comparable amount of CH4 as midbogs (63 +/- 7.0% and 64 +/- 9.3%).

bacteria↗

Applicability of Spectral Decomposition by Varimax-Rotated, Principal Component Analysis to the Surface Biology and Geology (SBG) VNIR Mission Concept

Cyanobacterial and Harmful Algal Blooms (CyanoHABs) are a growing concern in coastal and inland waters. But, spectral interference from multiple constituents in optically complex waters can hamper application of remote sensing using traditional image processing methods. The Kent State University (KSU) spectral decomposition method can be applied to multispectral and hyperspectral remote sensing images (e.g. HICO and the NASA Glenn HSI2) to partition and identify signals related to cyanobacteria, algae, pigment degradation products and suspended sediment in each pixel. Fundamental to the use of remote sensing data is the ability to extract independent signals from correlated hyperspectral VNIR data cubes. The Kent State University varimax-rotated, principal component analysis method (VPCA) is important to integrate into the SBG VNIR mission concept because it provides greater specificity, a software-based SNR boost relative to hardware performance, and can assist with Cal/Val, Modeling and Applications. We present examples of the hyperspectral application of the KSU VPCA method with relevance to SBG. The information extracted by VPCA can be validated spectrally or spatially with laboratory and/or in situ sensors, which capture spatial or time series of information at discrete points within remote sensing images. Comparisons show hyperspectral sensors extract more components than multispectral ones, but more independent information can be extracted from multispectral sensors by VPCA than traditional band ratio approaches. The spectral decomposition method is capable of enhancing the signal to noise ratio (SNR) of the NASA Glenn, second-generation hyperspectral imager by a factor of 7x to 20x, with a spectral reproducibility of ±3%. The spectral decomposition method, when compared against existing remote sensing monitoring methods exhibits both greater specificity and a lower detection limit. The method has been validated with multispectral images in Lake Erie to quantify the Microcystis CyanoHAB and from the Indian River Lagoon, Florida to quantify the Brown Tide resulting from A. lagunesnsis. Field operations in the Western Basin of Lake Erie were conducted using a bbe Fluoroprobe to collect vertical profiles and horizontal tows along a transect from the Toledo to the Detroit Lighthouse during coincident satellite overpasses. Extraction of pixel values from the MODIS Aqua sensor yields agreement between in situ field and lab-based measures of cyanobacterial, cryptophyte, diatoms and green algae, suspended sediment and pigment degradation products with R2>0.8.

hyperspectral↗

A Phenomenon-Based Decomposition of Model-Based Estimates of Boreal Winter ENSO Variability

Climate models are now routinely being used to simulate and predict climate variability on time scales ranging from sub-seasonal to seasonal and longer. As such, there are now long histories of such simulations and predictions spanning multiple decades and multiple ensemble members, both of which are crucial for separating climate signal from climate noise. A key focus of such runs has been the El Niño-Southern Oscillation (ENSO), spurred by recent improvements in our ability to predict such events, though questions remain as to how well climate models do beyond simply always predicting the “canonical” atmospheric response to an ENSO event—something simple statistical models already do reasonably well. This is a critical issue that needs addressing, given the importance of event-to-event differences for predicting regional impacts of ENSO teleconnections, and the need to justify the expense of running sophisticated climate models. Unfortunately, current diagnostic tools are not well suited for quantifying the different sources of variability associated with specific phenomena such as ENSO. More generally, while much effort has focused on addressing model bias, less has been done to address errors in second moment statistics—an issue whose importance is gaining increased attention particularly as we build climate prediction systems capable of taking advantage of forecasts of opportunity—a capability that requires reliable estimates of forecast uncertainty. In this report, we outline a phenomenon-based statistical decomposition of climate variance(in essence a detailed variance budget)that is specifically tailored to address the above questions by separating the variability (both the signal and noise) into that tied to the long-term average impact of a particular phenomenon(the composite mean) and the event-to-event(E2E) variability about the composite mean. In addition, we provide related decompositions of the correlations that allow us to quantify how much of the agreement with observations (the skill) comes from the composite mean as opposed to from the E2Evariability. As an example, we present the results of such a decomposition for ENSO based on simulations with the GEOS atmospheric general circulation model (AGCM), with a focus on the monthly mean impacts over North America during boreal winter(December –March). Here we take advantage of existing GEOS AGCM simulations that were produced as companion simulations to MERRA-2for the period 1980-2016. Comparisons are made throughout with MERRA-2.

ENSO↗

The response of the HMX-based material PBXN-9 to thermal insults: thermal decomposition kinetics and morphological changes

PBXN-9, an HMX-formulation, is thermally damaged and thermally decomposed in order to determine the morphological changes and decomposition kinetics that occur in the material after mild to moderate heating. The material and its constituents were decomposed using standard thermal analysis techniques (DSC and TGA) and the decomposition kinetics are reported using different kinetic models. Pressed parts and prill were thermally damaged, i.e. heated to temperatures that resulted in material changes but did not result in significant decomposition or explosion, and analyzed. In general, the thermally damaged samples showed a significant increase in porosity and decrease in density and a small amount of weight loss. These PBXN-9 samples appear to sustain more thermal damage than similar HMX-Viton A formulations and the most likely reasons are the decomposition/evaporation of a volatile plasticizer and a polymorphic transition of the HMX from {beta} to {delta} phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and thermal decomposition properties of hydrogen-rich phosphorus salts.

Complex metal hydrides continue to be investigated as solid-materials for hydrogen storage. Traditional interstitial metal hydrides offer favorable thermodynamics and kinetics for hydrogen release but do not meet energy density requires. Anionic metal hydrides, and complex metal hydrides like magnesium borohydride have higher energy densities compared to interstitial metal hydrides, but poor kinetics and/or thermodynamically unfavorable side products limit their deployment as hydrogen storage materials in transportation applications. Main-group anionic materials such as the bis(borane)hypophosphite salt [PH2(BH3)2] have been known for decades, but only recently have we begun to explore their ability to release hydrogen. We have developed a new procedure for synthesizing the lithium and sodium hypophosphite salts. Routes for accessing other metal bis(borane)hypophosphite salts will be discussed. A significant advantage of this class of material is the air and water stability of the anion. Compared to metal borohydrides, which reactive violently with water, these phosphorus-based salts can be dissolved in protic solvents, including water, with little to no decomposition over the course of multiple days. The ability of these salts to release hydrogen upon heating has been assessed. While preliminary results indicate phosphine and boron-containing species are released, hydrogen is also a major component of the volatile species observed during the thermal decomposition. Additives such as NaH or KH mixed with the sodium salt Na[PH2(BH3)2] significantly perturb the decomposition reaction and greatly increase the mass loss as determined by thermal gravimetric analysis (TGA). This symbiotic behavior has the potential to affect the hydrogen storage ability of bis(borane)hypophosphite salts.

08 HYDROGEN↗

Decomposition Pathways of Tetraalkylammonium Hydroxides: Experimental and DFT Studies and Their Implications for Alkaline Exchange Fuel Cell Membranes

The mechanism of the thermal decomposition of a series of alkyl trimethyl ammonium hydroxides ([RMe{sub 3}N][OH], R = Et, n-Pr, i-Bu, PhCH{sub 2}, Me{sub 3}CCH{sub 2}) was studied using TGA, evolved gas analysis and NMR spectroscopy due to the importance of these and related ions in anion exchange fuel cell membranes. Isotopic labeling with deuterium showed that deprotonation of the methyl groups of the ammonium ions by deuteroxide establishes a rapid equilibrium between the tetraalkyl ammonium ions and the nitrogen ylide species and water that scrambles the deuterium with the proton on the methyl groups. The products of the thermal decomposition when R = Et, n-Pr, i-Bu are predominately olefins arising from Hoffmann elimination, while the neopentyl substituted ammonium ion gives only neopentyl trimethyl amine and methanol, the products of S{sub N}2 attack of hydroxide on the methyl groups. DFT studies of these reactions confirm the relative activation barriers that are observed in the experimental decomposition studies.

08 HYDROGEN↗

Singular value decomposition utilizing parallel algorithms on graphical processors

One of the current challenges in underwater acoustic array signal processing is the detection of quiet targets in the presence of noise. In order to enable robust detection, one of the key processing steps requires data and replica whitening. This, in turn, involves the eigen-decomposition of the sample spectral matrix, Cx = 1/K xKX(k)XH(k) where X(k) denotes a single frequency snapshot with an element for each element of the array. By employing the singular value decomposition (SVD) method, the eigenvectors and eigenvalues can be determined directly from the data without computing the sample covariance matrix, reducing the computational requirements for a given level of accuracy (van Trees, Optimum Array Processing). (Recall that the SVD of a complex matrix A involves determining V, , and U such that A = U VH where U and V are orthonormal and is a positive, real, diagonal matrix containing the singular values of A. U and V are the eigenvectors of AAH and AHA, respectively, while the singular values are the square roots of the eigenvalues of AAH.) Because it is desirable to be able to compute these quantities in real time, an efficient technique for computing the SVD is vital. In addition, emerging multicore processors like graphical processing units (GPUs) are bringing parallel processing capabilities to an ever increasing number of users. Since the computational tasks involved in array signal processing are well suited for parallelization, it is expected that these computations will be implemented using GPUs as soon as users have the necessary computational tools available to them. Thus, it is important to have an SVD algorithm that is suitable for these processors. This work explores the effectiveness of two different parallel SVD implementations on an NVIDIA Tesla C2050 GPU (14 multiprocessors, 32 cores per multiprocessor, 1.15 GHz clock - peed). The first algorithm is based on a two-step algorithm which bidiagonalizes the matrix using Householder transformations, and then diagonalizes the intermediate bidiagonal matrix through implicit QR shifts. This is similar to that implemented for real matrices by Lahabar and Narayanan ("Singular Value Decomposition on GPU using CUDA", IEEE International Parallel Distributed Processing Symposium 2009). The implementation is done in a hybrid manner, with the bidiagonalization stage done using the GPU while the diagonalization stage is done using the CPU, with the GPU used to update the U and V matrices. The second algorithm is based on a one-sided Jacobi scheme utilizing a sequence of pair-wise column orthogonalizations such that A is replaced by AV until the resulting matrix is sufficiently orthogonal (that is, equal to U ). V is obtained from the sequence of orthogonalizations, while can be found from the square root of the diagonal elements of AH A and, once is known, U can be found from column scaling the resulting matrix. These implementations utilize CUDA Fortran and NVIDIA's CUB LAS library. The primary goal of this study is to quantify the comparative performance of these two techniques against themselves and other standard implementations (for example, MATLAB). Considering that there is significant overhead associated with transferring data to the GPU and with synchronization between the GPU and the host CPU, it is also important to understand when it is worthwhile to use the GPU in terms of the matrix size and number of concurrent SVDs to be calculated.

99 GENERAL AND MISCELLANEOUS↗

Devices and methods for hydrogen generation via ammonia decomposition

Systems and methods for hydrogen generation via ammonia decomposition that utilize a fixed bed reactor configured to receive inflows of NH 3 and oxidant and to produce an outflow of high purity H 2 . The fixed bed reactor contains a fixed bed of a NH 3 decomposition catalyst wherewith the NH 3 decomposes to form N 2 and H 2 ; a plurality of ceramic hollows fibers with a high surface to volume ratio disposed in the fixed bed, the hollow fibers having an H 2 selective membrane disposed thereon for extracting H 2 from N 2 and to form a permeate of the high purity H 2 and a retentate of primarily N 2 ; and a catalytic H 2 burner also disposed in the fixed bed, the catalytic H 2 burner for burning a portion of the H 2 with the oxidant to provide thermal energy for the NH3 decomposition.

Li, Shiguang↗

Schur-decomposition for 3D matrix equations and its application in solving radiative discrete ordinates equations discretized by Chebyshev collocation spectral method

The Schur-decomposition for three-dimensional matrix equations is developed and used to directly solve the radiative discrete ordinates equations which are discretized by Chebyshev collocation spectral method. Three methods, say, the spectral methods based on 2D and 3D matrix equation solvers individually, and the standard discrete ordinates method, are presented. The numerical results show the good accuracy of spectral method based on direct solvers. The CPU time cost comparisons against the resolutions between these three methods are made using MATLAB and FORTRAN 95 computer languages separately. The results show that the CPU time cost of Chebyshev collocation spectral method with 3D Schur-decomposition solver is the least, and almost only one thirtieth to one fiftieth CPU time is needed when using the spectral method with 3D Schur-decomposition solver compared with the standard discrete ordinates method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Normality of Monte Carlo criticality eigenfunction decomposition coefficients

A proof is presented, which shows that after a single Monte Carlo (MC) neutron transport power method iteration without normalization, the coefficients of an eigenfunction decomposition of the fission source density are normally distributed when using analog or implicit capture MC. Using a Pearson correlation coefficient test, the proof is corroborated by results from a uniform slab reactor problem, and those results also suggest that the coefficients are normally distributed with normalization. The proof and numerical test results support the application of earlier work on the convergence of eigenfunctions under stochastic operators. Knowledge of the Gaussian shape of decomposition coefficients allows researchers to determine an appropriate level of confidence in the distribution of fission sites taken from a MC simulation. This knowledge of the shape of the probability distributions of decomposition coefficients encourages the creation of new predictive convergence diagnostics. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Permeable Membrane Reactor for Ammonia Decomposition - RUPS

The generation of impurities in gas processing facilities must be counteracted to minimize downstream impacts to process components and piping. Reservoir Unloading Purification System (RUPS) is an umbrella term describing research and development activities to remove impurities from current and future facility gases. As the application of developed RUPS technologies matures, the technologies will be verified in the Hydrogen Processing Demonstration System (HPDS) to provide a holistic view of the process before future implementation. By adding catalyst, it is possible to decrease the activation energy typically required for decomposition of ammonia. This allows a drastic decrease in required temperatures necessary for the reaction to take place in a permeable membrane reactor (PMR) (from > 650 deg. C to < 425 deg. C). A PMR was fabricated for scoping studies. The primary objective of this research is to determine whether the use of a PMR containing ruthenium catalyst can provide a favorable environment for maximum ammonia decomposition at moderate temperatures. Scoping studies will be performed to determine the catalytic capability of Ru-Al{sub 2}O{sub 3} or Ru-SiO{sub 2} to determine the effectiveness of ammonia decomposition with a PMR. Tests will evaluate effects of: gas composition/impurity concentration, catalyst loading, test cell space velocity, and various carrier gases of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proper orthogonal decomposition analysis of parallel twin jets measured using particle image velocimetry - 18685

The mixing of turbulent jets has been found in several locations of High Temperature Gas-cooled Reactors (HTGRs) including upper and lower plenums, where jets impinge into open space from coolant channels. In the present work, a parallel twin jets experimental facility was used to generate velocity field of mixing jets by means of Particle Image Velocimetry (PIV), which can be eventually used for validation of Computational Fluid Dynamics (CFD) simulations. The facility has two fixed parallel rectangular jet nozzles (5.8 mm in width, 87.8 mm in length) submerged in the middle of the water tank, which allows an assumption of free jet mixing. In order to compare the experimental data produced to existing data, Re = 4000 {approx} 5000 at the jet outlet was selected. In the past, several statistically meaningful data have been reported using Laser Doppler Velocimetry (LDV) and Hot Wire Anemometer (HWA), which can support Reynolds Averaged Navier-Stokes turbulent models. However, recent CFD simulations using Large Eddy Simulation (LES) require high resolution experimental data in time and space. Thus, in this study, in addition to statistically enough number of data sets for RANS models validation, high temporal and spatial resolution data were collected for the validation of LES calculations. In order to study the turbulent structure Reynolds decomposition and Proper Orthogonal Decomposition (POD) were applied to the data obtained. These decomposition analyses visualized multi-scale vortices and the transportation of eddies. In terms of twin jets structure, the present experimental data showed good agreement with other techniques for the important characteristic parameters including the length of the converging region and the location of the merging point. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SNoGloDe: A Structured Nonlinear Global Decomposition Solver

Large-scale optimization problems often require decomposition strategies and customized algorithms to achieve optimal solutions within a reasonable time. Building on the work of Cao and Zavala (2019) for solving nonlinear two-stage stochastic programs to global optimality, we implement and extend their approach. We generalize to optimization problems reformulated with a block-angular constraint structure (e.g., temporal decomposition). Our framework, written in Python using Pyomo, is highly customizable and enables parallel execution of the decomposition. SNoGloDe allows tailored branching strategies, lower bounding problems, and candidate generators to leverage problem-specific knowledge. To demonstrate effectiveness, we compare SNoGloDe’s performance with Gurobi on a temporally decomposed produced water case study.

algorithms↗