Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crystal Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Two-tone Doppler cooling of radial two-dimensional crystals in a radio-frequency ion trap

We study the Doppler-cooling of radial two-dimensional (2D) Coulomb crystals of trapped barium ions in a radiofrequency trap. Ions in radial 2D crystals experience micromotion of an amplitude that increases linearly with the distance from the trap center, leading to a position-dependent frequency modulation of laser light in each ion's rest frame. We use two tones of Doppler-cooling laser light separated by approximately 100 MHz to efficiently cool distinct regions in the crystals with differing amplitudes of micromotion. This technique allows us to trap and cool more than 50 ions populating 4 shells in a radial two-dimensional crystal, where with a single tone of Doppler cooling light we are limited to 30 ions in 3 shells. Here, we also individually characterize the micromotion of all ions within the crystals, and use this information to locate the center of the trap and to determine the Matthieu parameters q x and q y .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Manipulating the Geometric and Electronic Structures of Manganese Nitrides for Ammonia Synthesis

Abstract Manganese (Mn) nitrides are important nitrogen (N) carriers for small‐scale intermittent ammonia (NH 3 ) synthesis. However, only 3∼8 % of lattice N are converted into NH 3 . In this study, the geometric and electronic structures of well‐defined Mn 4 N and Mn 2 N lattices were altered using transition metal heteroatoms (Cr, Fe, Co, Ni, Mo) to understand the driving force behind lattice N diffusion and extraction. Density Functional Theory (DFT) revealed that the binding of early hydrogenation product (NH) follows a linear relationship with lattice N over a wide range of close‐packed surfaces. But, the binding of NH 2 and NH 3 are more sensitive to the geometric and electronic structures. Further, the chemical bonding can be quantitatively characterized with the covalency derived from Crystal Orbital Hamiltonian Population (COHP). In the Eley Rideal‐Mars van Krevelan pathway, the overall NH 3 formation free energy ( ) and lattice N diffusion barrier ( ) are the respective thermodynamic and kinetic determining factors. Aided by a rate‐determining step (RDS) model, Mn 4 N modified with Fe, Co, Ni single‐atom dopants all show enhanced rates for NH 3 formation.

Shan, Nannan↗

Synthesis, Characterization, and Biological Activity of Hybrid Thiosemicarbazone–Alkylthiocarbamate Metal Complexes

A series of hybrid ligands (H 2 L 1 –H 2 L 3 ) derived from 4-methyl-3-thiosemicarbazide and hydrazinecarbothioic acid O-alkyl esters were synthesized and characterized by NMR. The ligands were chelated with copper (4–6), nickel (7–9), and zinc (10–12) and characterized by spectroscopy, electrochemistry, and single crystal X-ray crystallography. The chelated metals displayed substantial anodic shifts in the Cu II/I reduction potential of ~160 mV relative to their bis(thiosemicarbazone) analogues. The metal chelates 4–12 were evaluated for potential anticancer activity by MTT assays, and selected results were confirmed by clonogenic and trypan blue assays. The copper derivatives 4 and 6 were found to have potent and cancer-selective antiproliferative effects, with GI 50 values less than 100 nM in A549 lung adenocarcinoma cells compared with at least 20-fold less activity in IMR90 nonmalignant lung fibroblasts. In comparison, the nickel complexes were much less active and had little cancer-selectivity. Varying by ligand, the zinc complexes were less potent or had comparable activity compared to that of the corresponding copper complex. UV–visible spectroscopy indicated that zinc complex 10 was transmetalated in the presence of equimolar copper, whereas nickel complex 7 was not. Copper complexes 4 and 6 were also assessed in the NCI60 screen and were found to have cytotoxic activity against most solid tumor cell lines. In MTT assays, 4 and 6 were substantially more active against A549 cancer cells than Cu(ATSM) and were more cancer-selective (for A549 compared to IMR-90) than Cu(GTSM). Finally, our results suggest that hybrid thiosemicarbazone–alkylthiocarbamate copper complexes have potential for development as new anticancer agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li 5 VF 4 (SO 4 ) 2 : A Prototype High-Voltage Li-Ion Cathode.

A Li-rich polyanionic compound based on V 3+ with a previously unknown structure, Li 5 VF 4 (SO 4 ) 2 , has been developed as a high-voltage cathode material for Li-ion batteries. The solvothermal preparation of this material, crystal structure solution, and initial electrochemical characterization are presented. An analysis based on density functional theory electronic structure calculations suggests that a high voltage close to 5 V is required to extract two Li ions and to reach the oxidation state of V 5+ . However, the use of conventional carbonate-based electrolytes, which exhibit increasing degradation above a potential of 4.3 V, does not permit the full capacity of this compound to be achieved at this time.

25 ENERGY STORAGE↗

The Monomeric Alanediyl : AlAr i Pr8 (Ar i Pr8 = C 6 H-2,6-(C 6 H 2 -2,4,6-Pr i 3 ) 2 -3,5-Pr i 2 ): An Organoaluminum(I) Compound with a One-Coordinate Aluminum Atom

Reduction of the aluminum iodide AlI 2 Ar i Pr8 ( 1 ; Ar i Pr8 = C 6 H-2,6-(C 6 H 2 -2,4,6-Pr i 3 ) 2 -3,5-Pr i 2 ) with 5% w/w Na/NaCl in hexanes gave a dark red solution from which the monomeric alanediyl : AlAr i Pr8 ( 2 ) was isolated in ca. 28% yield as yellow-orange crystals. Compounds 1 and 2 were characterized by X-ray crystallography, electronic and NMR spectroscopy, and theoretical calculations. The Al atom in 2 is one-coordinate, and the compound displays two absorptions in its electronic spectrum at 354 and 455 nm. It reacts with H 2 under ambient conditions to give the aluminum hydride {AlH(μ-H)Ar i Pr8 } 2 , probably via a weakly bound dimer of 2 as an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substitution-Mediated Calcination of Nickel-Based Cathodes: Decoupling Lithiation and Crystallization

Nickel-based layered cathodes such as LiNiO 2 offer high energy density for lithium-ion batteries, yet improvements in cycling performance and safety are required for practical use–often achieved through manganese and cobalt substitution as in LiNi 0.80 Mn 0.10 Co 0.10 O 2 (NMC811). However, how such substitution impacts calcination, the key process that governs lithiation, structural ordering, crystallization, and ultimately the resulting material properties, remains unclear. Here, in this study, we investigate substitution-mediated calcination dynamics in NMC811 compared to LiNiO 2 using multiscale-correlated in situ spectroscopy and atomistic-to-mesoscale modeling. While both systems progress through the same sequence of intermediates toward the thermodynamically favored layered phase, NMC811 exhibits an earlier onset of layering, concurrent with hydroxide decomposition followed by sluggish crystallization. Modeling reveals that Mn and Co lower the energy barrier for lithium incorporation and ordering but increase the penalty for interlayer gliding, thereby slowing crystal growth at elevated temperatures. This substitution-mediated decoupling of lithiation and crystallization explains the fine-grained microstructure observed in NMC811 versus coarsened particles in LiNiO 2 and establishes a mechanistic framework for predictive microstructure engineering of Ni-based cathodes.

Calcination↗

Synthesis of 2D layered transition metal (Ni, Co) hydroxides via edge-on condensation

Abstract Layered transition metal hydroxides (LTMHs) with transition metal centers sandwiched between layers of coordinating hydroxide anions have attracted considerable interest for their potential in developing clean energy sources and storage technologies. However, two-dimensional (2D) LTMHs remain largely understudied in terms of physical properties and applications in electronic devices. Here, for the first time we report > 20 μm α-Ni(OH) 2 2D crystals, synthesized from hydrothermal reaction. And an edge-on condensation mechanism assisted with the crystal field geometry is proposed to understand the 2D intra-planar growth of the crystals, which is also testified through series of systematic comparative studies. We also report the successful synthesis of 2D Co(OH) 2 crystals (> 40 μm) with more irregular shape due to the slightly distorted octahedral geometry of the crystal field. Moreover, the detailed structural characterization of synthesized α-Ni(OH) 2 are performed. The optical band gap energy is extrapolated as 2.54 eV from optical absorption measurements and the electronic bandgap is measured as 2.52 eV from reflected electrons energy loss spectroscopy (REELS). We further demonstrate its potential as a wide bandgap (WBG) semiconductor for high voltage operation in 2D electronics with a high breakdown strength, 4.77 MV/cm with 4.9 nm thickness. The successful realization of the 2D LTMHs opens the door for future exploration of more fundamental physical properties and device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ThC 2 @C 82 versus Th@C 84 : unexpected formation of triangular thorium carbide cluster inside fullerenes

Synthesis of the first thorium-containing clusterfullerenes, ThC 2 @C s (6)–C 82 and ThC 2 @C 2 (5)–C 82 , is reported. These two novel actinide fullerene compounds were characterized by mass spectrometry, single-crystal X-ray diffraction crystallography, UV–vis–NIR spectroscopy, and theoretical calculations. Crystallographic studies reveal that the encapsulated ThC 2 clusters in both C s (6)–C 82 and C 2 (5)–C 82 feature a novel bonding structure with one thorium metal center connected by a C≡C unit, forming an isosceles triangular configuration, which has not been hitherto observed for endohedral fullerenes or for solid phase thorium carbides. Electronic structure calculations assign a formal electronic structure of [Th 4+ (C 2 ) 2- ] 2+ @[C 82 ] 2- , with pronounced donation bonding from (C 2 ) 2- to Th 4+ , secondary backbonding from the fullerene to thorium and Th–C double bond character in both compounds. This work presents a new family of endohedral fullerenes, MC 2 @C 2n-2 , being unexpected isomers of MC 2n , and provides broader understanding of thorium bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between ferroelectricity and ferroelectric orthorhombic phase of Hf x Zr 1-x O 2 thin films using synchrotron x-ray analysis

The change in the interplanar spacing ( d -spacing) including the ferroelectric orthorhombic (O) phase in the low-temperature fabricated Hf x Zr 1-x O 2 (HZO) films was studied using synchrotron grazing-incidence wide-angle x-ray scattering analysis. The 10-nm-thick HZO films were fabricated by thermal and plasma-enhanced atomic layer deposition (TH- and PE-ALD) methods using H 2 O gas and O 2 plasma as oxidants, respectively, and a post-metallization annealing (PMA) was performed at 300–400 °C. The d -spacing of the mixture of (111)-, (101)-, and (111)-planes of O, tetragonal (T), and cubic (C) phases, respectively, for the TH- and PE-ALD HZO films increased up to 2.99 Å with an increase in PMA temperature, while the d -spacing estimated by conventional x-ray diffraction was 2.92 Å regardless of the PMA temperature. The remanent polarization (2 P r = P r + - P r - ) of the HZO films increased as the PMA temperature increased. It is clear that the 2 P r value satisfied a linear relationship as a function of the d -spacing of O(111)/T(101)/C(111) phases. Furthermore, the wake-up effect was found to depend on the ferroelectric O phase formation. The wake-up effect was significantly reduced in both the TH- and PE-ALD HZO films after the PMA at 400 °C due to the increase in the ferroelectric O phase formation. The leakage current density ( J )–electric field properties of the PE-ALD HZO film with the lowest d -spacing were divided into three steps, such as low, middle, and large J values, in the wake-up (10 3 cycles), pristine (10 0 cycle), and fatigue (10 7 cycles) states, respectively. Therefore, an analysis of the ferroelectric O phase is very important for understanding the ferroelectricity including endurance.

36 MATERIALS SCIENCE↗

Characterizing structural features of two-dimensional particle systems through Voronoi topology

This paper introduces a new approach toward characterizing local structural features of two-dimensional particle systems. The approach can accurately identify and characterize defects in high-temperature crystals, distinguish a wide range of nominally disordered systems, and robustly describe complex structures such as grain boundaries. This paper also introduces two-dimensional functionality into the open-source software program VoroTop which automates this analysis. This software package is built on a recently-introduced multithreaded version of V ORO ++, enabling the analysis of systems with billions of particles on high-performance computer architectures.

36 MATERIALS SCIENCE↗

Magnetotransport and electronic structure of the antiferromagnetic semimetal YbAs

A number of rare-earth monopnictides have topologically nontrivial band structures together with magnetism and strong electronic correlations. In order to examine whether the antiferromagnetic (AFM) semimetal YbAs (TN=0.5 K) exhibits such a scenario, we have grown high-quality single crystals using a flux method, and characterized the magnetic properties and electronic structure using specific heat, magnetotransport, and angle-resolved photoemission spectroscopy (ARPES) measurements, together with density functional theory (DFT) calculations. Both ARPES and DFT calculations find no evidence for band inversions in YbAs, indicating a topologically trivial electronic structure. From low-temperature magnetotransport measurements, we map the field-temperature phase diagram, where we find the presence of a field stabilized phase distinct from the AFM phase at low temperatures. Additionally, an extremely large magnetoresistance (XMR) for both YbAs and the nonmagnetic counterpart LuAs is also observed, which can consistently be accounted for by the presence of electron-hole compensation. Moreover, an angle-dependent study of the Shubnikov-de Haas effect oscillations reveals very similar Fermi surfaces between YbAs and LuAs, with light effective masses down to at least 0.5 K, indicating that the Yb-4f electrons are well localized, and do not contribute to the Fermi surface. However, the influence of the localized Yb-4f electrons on the magnetotransport of YbAs can be discerned from the distinct temperature dependence of the XMR compared to that of LuAs, which we attribute to the influence of short-ranged spin correlations that appear well above TN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic structure of different surface terminations of polycrystalline ZnPd

The intermetallic compound ZnPd has been found to have desirable characteristics as a catalyst for the steam reforming of methanol. The understanding of the surface structure of ZnPd is important to optimize its catalytic behavior. However, due to the lack of bulk single-crystal samples and the complexity of characterizing surface properties in the available polycrystalline samples using common experimental techniques, all previous surface science studies of this compound have been performed on surface alloy samples formed through thin-film deposition. In this study, we present findings on the chemical and atomic structure of the surfaces of bulk polycrystalline ZnPd studied by a variety of complementary experimental techniques, including scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), low energy electron microscopy (LEEM), photoemission electron microscopy (PEEM), and microspot low-energy electron diffraction ( μ -LEED). These experimental techniques, combined with density functional theory (DFT)-based thermodynamic calculations of surface free energy and detachment kinetics at the step edges, confirm that surfaces terminated by atomic layers composed of both Zn and Pd atoms are more stable than those terminated by only Zn or Pd layers. DFT calculations also demonstrate that the primary contribution to the tunneling current arises from Pd atoms, in agreement with the STM results. The formation of intermetallics at surfaces may contribute to the superior catalyst properties of ZnPd over Zn or Pd elemental counterparts. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

Accounting for electron-beam-induced warping of molecular nanocrystals in MicroED structure determination

High-energy electrons induce sample damage and motion at the nanoscale to fundamentally limit the determination of molecular structures by electron diffraction. Using a fast event-based electron counting (EBEC) detector, we characterize beam-induced, dynamic, molecular crystal lattice reorientations (BIRs). These changes are sufficiently large to bring reciprocal lattice points entirely in or out of intersection with the sphere of reflection, occur as early events in the decay of diffracted signal due to radiolytic damage, and coincide with beam-induced migrations of crystal bend contours within the same fluence regime and at the same illuminated location on a crystal. These effects are observed in crystals of biotin, a series of amino acid metal chelates, and a six-residue peptide, suggesting that incident electrons inevitably warp molecular lattices. The precise orientation changes experienced by a given microcrystal are unpredictable but are measurable by indexing individual diffraction patterns during beam-induced decay. Reorientations can often tilt a crystal lattice several degrees away from its initial position before irradiation, and for an especially beam-sensitive Zn(II)-methionine chelate, are associated with dramatic crystal quakes prior to 1 e − Å −2 electron beam fluence accumulates. Since BIR coincides with the early stages of beam-induced damage, it echoes the beam-induced motion observed in single-particle cryoEM. As with motion correction for cryoEM imaging experiments, accounting for BIR-induced errors during data processing could improve the accuracy of MicroED data.

Vlahakis, Niko (ORCID:0000000250920265)↗

Complex Disorder in Type-I Clathrates: Synthesis and Structural Characterization of A8GaxSn46−x (A = Rb, Cs; 6.9 < x < 7.5)

Exploratory studies in the systems Rb–Ga–Sn and Cs–Ga–Sn yielded the cubic type-I clathrates with refined compositions Rb8GaxSn46−x and Cs8GaxSn46−x (6.9 < x < 7.5). Nearly single-phase materials with good crystallinity were obtained from stoichiometric reactions of the elements. The structures were characterized by means of single-crystal X-ray diffraction methods. Both Rb8GaxSn46−x and Cs8GaxSn46−x represents cases, where a Group 13 element randomly substitutes a Group 14 element in the structure. The extent of Ga/Sn mixing is apparently governed by the drive of the system to achieve an optimal valence electron count, and hence, Rb8GaxSn46−x and Cs8GaxSn46−x (x ≈ 8) can be regarded as Zintl phases. This notion is supported by structure refinements on a multitude of single-crystal X-ray diffraction data, which also confirm that both types of cages in the cubic type-I structure are fully occupied by Rb and Cs atoms. The open-framework, comprised of 46 nodes per formula unit, adapts to the incorporation of nearly eight Ga atoms within the matrix of Sn, whereby small, short-range distortions result. The exact nature of these effects is still unclear, as so far, the structural variations could only be modeled as both positional and occupational disorder at one of three framework sites. Since vacancies in the structures of the binary type-I clathrates A8Sn46−x☐x (A = Rb, Cs; ☐ = missing Sn atom) are also known to cause local distortions, the latter were also synthesized with the same protocols used for the synthesis of A8GaxSn46−x and structurally re-analyzed. The results from the latter studies confirm that homogeneity issues abound, and that the final structures/compositions are an intricate function of the experimental conditions.

36 MATERIALS SCIENCE↗

Silicon solar cell process development, fabrication, and analysis

Work has progressed in fabrication and characterization of solar cells from ubiquitous crystallization process (UCP) wafers and LASS ribbons. Gettering tests applied to UCP wafers made little change on their performance compared with corresponding baseline data. Advanced processes such as shallow junction (SJ), back surface field (BSF), and multilayer antireflection (MLAR) were also applied. While BSF by Al paste had shunting problems, cells with SJ and BSF by evaporated Al, and MLAR did achieve 14.1% AMI on UCP silicon. The study of LASS material was very preliminary. Only a few cells with SJ, BSR, (no BSF) and MLAR were completed due to mechanical yield problems after lapping the material. Average efficiency was 10.7% AMI with 13.4% AMI for CZ controls. Relatively high minority carrier diffusion lengths were obtained. The lower than expected Jsc could be partially explained by low active area due to irregular sizes.

Yoo, H. I.↗

Chemistry of Apollo 11 low-K mare basalts

A reexamination of the bulk major and trace element geochemistry of Apollo 11 low-K mare basalts is presented. New analyses are given for seven previously unanalyzed samples (10003, 10020, 10044, 10047, 10050, 10058, and 10062) and for two low-K basalts (10029 and 10092) and one high-K basalt (10071) for which comprehensive compositional data were previously lacking. The data show that three distinct magma types have been sampled, as proposed by Beaty and Albee (1978), and that these magma types are unrelated by near-surface crystal fractionation. Each magma type is characterized by distinctive magmaphile element ratios, which enable previously unclassified samples (10050 and 10062) to be assigned to an appropriate magma type.

Rhodes, J. M.↗

Nd:Glass-Raman laser for water vapor dial

A tunable solid-state Raman shifted laser which was used in a water vapor Differential Absorption Lidar (DIAL) system at 9400 A is described. The DIAL transmitter is based on a tunable glass laser operating at 1.06 microns, a hydrogen Raman cell to shift the radiation to 1.88 microns, and a frequency doubling crystal. The results of measurements which characterize the output of the laser with respect to optimization of optical configuration and of Raman parameters were reported. The DIAL system was also described and preliminary atmospheric returns shown.

Kagann, R. H.↗