SEARCH · Engineering Papers

Results for “Cross points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Joint cosmological fits to DESI-DR1 full-shape clustering and weak gravitational lensing in configuration space

We present a joint $3\times2$-pt cosmological analysis of auto- and cross-correlations between the Dark Energy Spectroscopic Instrument Data Release 1 (DESI-DR1) Bright Galaxy Survey (BGS) and Luminous Red Galaxy (LRG) samples and overlapping shear measurements from the KiDS-1000, DES-Y3 and HSC-Y3 weak lensing surveys. We perform our analysis in configuration space and, in addition to the cosmic shear correlation functions for each weak lensing dataset, we fit the tangential shear of the weak lensing source galaxies around DESI lens galaxies. Finally, we make use of the anisotropic BGS and LRG clustering information by fitting the full shape of the two-point correlation function multipoles measured over the full DESI-DR1 footprint, presenting the first full-shape analysis of DESI measurements in configuration space. We find that the addition of weak lensing information serves to improve, with respect to the clustering-only case, the measurements of the power spectrum amplitude parameters $\ln(10^{10}A_{\rm{s}})$ and $σ_{12}$ by $15\%$ and $36\%$, respectively. It also improves measurements of the linear bias of the lens galaxies by $15-20\%$, depending on the tracer. Our results show excellent consistency, regardless of the weak lensing survey considered, and are furthermore consistent with a companion analysis that fits $3\times2$-pt correlations including DESI projected clustering measurements, as well as the results published by the weak lensing collaborations themselves. Our measured values for weak lensing amplitude are $S_{8}^{\mathrm{DESI\times HSC}}=0.787\pm0.020$, $S_{8}^{\mathrm{DESI\times DES}}=0.791\pm0.016$, $S_{8}^{\mathrm{DESI\times KiDS}}=0.771\pm0.017$, which are $1.9σ-2.9σ$ below the $S_8$ value preferred by Planck. Finally, our clustering-only results are in good agreement with the Fourier space full-shape analysis of all DESI tracers.

Semenaite, A. [Swinburne U., Ctr. Astrophys. Super↗

DOE OSTI2021

ResNet and CycleGAN for pulse shape discrimination of He-4 detector pulses: Recovering pulses conventional algorithms fail to label unanimously

Pulse shape discrimination (PSD) capable detectors, such as He-4, that respond to neutron and gamma-ray 7 interactions have a threshold deposited energy value below which n/γ discrimination vanishes when using 8 conventional PSD algorithms. Recent attempts in applying supervised learning based artificial neural 9 networks for PSD use the pulses in the separated regions to train the networks so they can be used to classify 10 another set of separated pulses. In doing so, pulses previously indistinguishable are not recovered for 11 classification, which would have increased the number of neutron and gamma-ray pulses that could be used 12 for further analysis. Assuming the reason why conventional PSD algorithms have unseparated regions is 13 because the parameter space of the algorithms fail to capture the intrinsic (but subtle) distinguishing 14 behavior of some of the neutron and gamma-ray pulses, a cycle-consistent generative adversarial network 15 (CycleGAN) was trained to amplify those differences and extract well separated neutron and gamma-ray 16 clusters. Results show that, once the network is trained with pulses from separated and unseparated regions, 17 it was able to transform the pulses in the unseparated region to improve the PSD. Subsequent n/γ 18 classification was performed using deep residual network (ResNet) that takes pulses with 512 data points 19 as an input. Two different ResNets were explored – simple ResNet and modified ResNet which takes 20 segmented pulse inputs in the first layer and the corresponding time axis values in the last hidden layer. 21 The later approach enables the network to extract time correlated pulse features to enhance its ability to 22 capture the pulse behaviors relevant for PSD. Although it achieves slightly lower accuracy, 99.41% versus 23 99.89%, based on simply counting the number of correct n/γ labels assigned, compared to the simple 24 ResNet, the modified ResNets architecture was able to decreases the cross-entropy loss function by half, 25 which implies that the correct n/γ labels assigned are less likely to be accidental. PSD parameter 26 distributions based on n/γ classification by ResNet before and after transforming unseparated pulses using 27 CycleGAN show that by enhancing the separation between neutrons and gamma-rays, the transformation 28 helps improve the performance of classifier networks that are trained using labeled dataset. The 29 enhancement of neutron and gamma-ray separation by the CycleGAN increased the PSD figure of merit 30 (FOM) by up to 70% in some regions. Here, the results show that, if a given detector achieves clear separation 31 between neutron and gamma-ray pulses in any energy region, such neural network approaches can help 32 lower the energy threshold for the separation and increasing the number of neutron and gamma-ray pulses 33 that can be used for further analysis.

4He↗

DOE OSTI2022

An Overview of Policies Influencing Air Pollution from the Electricity Sector in Central Asia

The electricity sector is a substantial source of air pollution and associated health problems in Central Asia and elsewhere. Fossil-fueled power plants emit a wide variety of harmful pollutants and their chemical precursors. The pollutants with the greatest health impacts are particulate matter and ozone. Once released into the atmosphere, there is no practical way to remove air pollutants, which means that policies designed to improve air quality have to limit the pollutants before release. However, tackling such pollution is challenging, particularly in developing economies, due to the need to provide electricity as a basic necessity for citizens and as an engine of economic growth. This report provides examples of policies impacting air pollution from the electricity sector in the Central Asian countries of Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan, and Uzbekistan. It is a partner publication to an earlier report that addressed policies in South Asia. As with the South Asia report, information on policies in some countries was difficult to locate; therefore, this is not a comprehensive study, but rather an overview or "scan" of the sector that includes examples of: (1) policies that directly regulate air quality by limiting emissions from specific point sources (by restricting operating hours, for instance); and (2) indirect policies that incentivize or disincentivize polluting activities, such as policies to encourage fuel switching to or from cleaner renewable resources. Note that this report was prepared before the Russia-Ukraine conflict and therefore doesn't address consequences of that war for Central Asia. The report finds: (1) That Central Asian countries typically have relatively few policy instruments available for regulating national air emissions; (2) That many countries, especially those that have a mismatch between seasonal demand and resource availability, could improve energy security and reduce air pollution through increased cross-border electricity trade; (3) That some countries have seemingly contradictory policies (promoting both coal and renewables, for instance). This report is also available in Russian: https://www.nrel.gov/docs/fy23osti/85192.pdf.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Discovering vanishing objects in POSS I red images using the Virtual Observatory

ABSTRACT In this paper, we report a search for vanishing sources in POSS I red images using virtual observatory (VO) archives, tools, and services. The search, conducted in the framework of the VASCO project, aims at finding POSS I (red) sources not present in recent catalogues like Pan-STARRS DR2 (limiting magnitude r = 21.4) or Gaia EDR3 (limiting magnitude G = 21). We found 298 165 sources visible only in POSS I plates, out of which 288 770 had a cross-match within 5 arcsec in other archives (mainly in the infrared), 189 were classified as asteroids, 35 as variable objects, 3592 as artefacts from the comparison to a second digitization (Supercosmos), and 180 as high proper motion objects without information on proper motion in Gaia EDR3. The remaining unidentified transients (5399) as well as the 172 163 sources not detected in the optical but identified in the infrared regime are available from a VO compliant archive and can be of interest in searches for strong M-dwarf flares, high-redshift supernovae, asteroids, or other categories of unidentified red transients. No point sources were detected by both POSS-I and POSS-II before vanishing, setting the rate of failed supernovae in the Milky Way during 70 yr to less than one in one billion.

Solano, Enrique↗

DOE OSTI2021

In-Operando Characterization of P-I-N Perovskite Solar Cell Under Reverse Bias

A solar module is often exposed to a variety of intensity and uniformity illumination conditions throughout a day. In the field, objects or dirt can block light from hitting the module creating a partial shading event. When a partial shading event occurs the module power point tracking system will typically push the shaded cells into reverse bias in order to avoid the current loss from the other series connected illuminated cells. When perovskite solar cells are operated in reverse bias, electrochemical reactions can occur, leading to both reversible and irreversible performance losses. Excess holes generated by reverse bias cause and push the oxidation reaction of halide ions from the lattice to neutral halogen interstitial. Small interstitial halogen atoms can diffuse across the device and potentially move from the perovskite layer and into the transport layers, shifting the fermi levels in the devices. In this investigation we utilize cross-sectional kelvin probe atomic force microscopy to map the band energetics of perovskite solar cells during reverse bias. We observe a 150 meV decrease in the work function of the C 60 . This leads to a decrease of 150 mV and 4 mA/cm 2 in V oc and in J sc respectively. Finally, we discuss methods to prevent this irreversible degradation after a perovskite device is held under reverse bias.

fullerene↗

DOE OSTI2026

Calculations Document

Figure 1 shows a simplified model schematic of the Tetracage target design. In this figure the green lines represent the Tetracage yarns, which consist of two parallel yarns on the top and two parallel yarns on the bottom with the pairs in a cross hatched pattern. For simplicity, as we are only considering vertical forces, we will perform calculations without consideration for the two pairs of yarns being perpendicular to each other. Also worth noting is the model shows the yarns extending directly to the capsule then closely hugging it – in reality, the yarns behave as you would expect where they hug the capsule only as much as the geometry of their deflection allows, similarly to if you held a tennis ball with a pair of parallel strings anchored at opposing ends. The dashed black lines show the path the yarns take straight across from slot glue point to slot glue point before the target is closed and the capsule deforms them. The variable r corresponds to the capsule outer radius. The variable L corresponds to the hohlraum inner radius. The variable a corresponds to the yarn offset from the center of the diagnostic band. The variable d corresponds to the wire deflection vertically.

42 ENGINEERING↗

DOE OSTI2025

Algorithms for coordinate reconstruction in position-sensitive virtual Frisch-grid detectors

Arrays of position-sensitive virtual Frisch-grid (VFG) CdZnTe (CZT) detectors provide a cost-effective solution for integrating large-area arrays for gamma-ray imaging and spectroscopy. These detectors employ high-aspect ratio CZT crystals (bars) with thicknesses up to 50 mm and cross-sections of up to 10 × 10 mm 2 . Despite the long drift distances of charge carriers in such crystals, the detectors have demonstrated excellent performance, achieving energy resolutions better than 1 % full width at half maximum (FWHM) at 662 keV and 3D position resolutions finer than 1 mm. The high spatial resolution is a critical feature of these detectors, as it enables correction of response non-uniformities caused by crystal defects, which remain present even in the highest-quality CZT material. Dislocations and dislocation walls are the primary defects responsible for variations in charge carrier losses as they drift from the interaction points toward the charge-collecting electrodes. The mechanism by which these defects affect carrier transport is generally well understood. Dislocations and sub-grain boundaries act as sinks for carrier-trapping centers, primarily impurities and secondary phases such as tellurium inclusions and precipitates. Here, these regions exhibit significantly higher carrier-trapping rates, leading to variations in the μτ-products. Because the locations of these micron-sized regions are fixed within the detector volume, fluctuations in the total collected charge arise from the random distribution of interaction sites. This results in non-uniform detector responses and degradation of energy resolution. However, by measuring the interaction-site locations with sufficient precision, charge-loss variations can be accurately corrected, allowing recovery of nearly intrinsic energy resolution.

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

Size scaling of acceleration phase energetics and its effects on direct-drive DT-layered implosions

A fundamental question in inertial confinement fusion is how implosion performance, and therefore ignition thresholds and fusion gain, evolve with target size. In laser-driven direct drive fusion, the scaling of laser-drive performance with size is critical to this evolution and to extrapolating results from the 30-kJ OMEGA laser-fusion experiments to ignition-class facilities such as the National Ignition Facility. Beyond the well-known adverse effects of cross-beam energy transfer (CBET) on drive performance, here we demonstrate that effects related to the non-scaling physics of thermal conduction and electron–ion energy equilibration exert an influence on drive behavior with scale that equals or surpasses that of CBET. We find that a significant portion of the lost implosion performance with increasing scale is due to the loss of shell implosion velocity. Here, we show that while modest modifications to hydro-scaled designs can recover most of the lost implosion velocity, a full hydro-equivalent performance extrapolation is difficult to achieve without CBET mitigation or subcooling below the triple point of DT.

Patel, D. [University of Rochester, NY (United Sta↗

DOE OSTI2021

Studies on the scintillation light detection in the ProtoDUNE Dual Phase liquid-argon TPC and its capability for the supernova trigger in DUNE

The Deep Underground Neutrino Experiment (DUNE) is a long-baseline neutrino oscillation experiment that aims at addressing key questions in neutrino physics in the next decades. Its scientific program includes the detection of the neutrino flux from a core-collapse supernova. The DUNE far detector will have four 17-kt mass liquid-argon (LAr) time-projection chamber (TPC) modules. ProtoDUNE Dual Phase (DP), a dual-phase LAr TPC with 300 t of active mass and 6 m of drift distance, was operated with cosmic muons in 2019-2020 as part of an R&D program at the CERN Neutrino Platform to demonstrate the feasibility of the technology at such a large scale. In a LAr TPC, the photon detection system (PDS) provides fun- damental timing information and trigger capabilities. The PDS of ProtoDUNE-DP, which consisted of 36 photomultiplier tubes (PMTs), counted on a dedicated light calibration system (LCS) to monitor the PMT response. In this dissertation, the characterization and validation of the ProtoDUNE-DP PDS and LCS components before their installation will be reviewed, highlighting the results of general interest for experiments that use liquid noble gasses as target medium. The results from the stable performance of both systems in the detector during 15 months will be presented next as well as the studies on the scintillation light detection in ProtoDUNE-DP, where the collection of light produced in LAr at 7 m from the photosensors has been achieved for the first time. It is worth pointing out that the excellent LAr purity and the large size of the detector have enabled to develop a unique data-driven investigation on aspects that are critical for LAr- based experiments but that are not completely understood. The analyses cover the characterization of the low-energy background detected by the PDS, the quantification of the electric field impact on the light yield, the evaluation of the Rayleigh scattering affecting the light propagation, and the analysis of the PMT detection efficiency. The effect of the VUV reflectivity of the detector materials will be also discussed. In addition, the estimation of the cosmic muon flux crossing the TPC and the study of the observed light yield by the PDS will be reported. Finally, the results from the simulation-based study of the supernova burst trigger capability with the PDS of a 12.1-kt active mass dual-phase LAr TPC as the one proposed for DUNE will be summarized. Several configurations of reflective foils installed in the TPC to enhance the light collection will be compared

Gallego-Ros, Ana↗

DOE OSTI2021

Studies on the scintillation light detection in the ProtoDUNE Dual Phase liquid-argon TPC and its capability for the supernova trigger in DUNE

The Deep Underground Neutrino Experiment (DUNE) is a long-baseline neutrino oscillation experiment that aims at addressing key questions in neutrino physics in the next decades. Its scientific program includes the detection of the neutrino flux from a core-collapse supernova. The DUNE far detector will have four 17-kt mass liquid-argon (LAr) time-projection chamber (TPC) modules. ProtoDUNE Dual Phase (DP), a dual-phase LAr TPC with 300 t of active mass and 6 m of drift distance, was operated with cosmic muons in 2019-2020 as part of an R&D program at the CERN Neutrino Platform to demonstrate the feasibility of the technology at such a large scale. In a LAr TPC, the photon detection system (PDS) provides fundamental timing information and trigger capabilities. The PDS of ProtoDUNE-DP, which consisted of 36 photomultiplier tubes (PMTs), counted on a dedicated light calibration system (LCS) to monitor the PMT response. In this dissertation, the characterization and validation of the ProtoDUNE-DP PDS and LCS components before their installation will be reviewed, highlighting the results of general interest for experiments that use liquid noble gasses as target medium. The results from the stable performance of both systems in the detector during 15 months will be presented next as well as the studies on the scintillation light detection in ProtoDUNE-DP, where the collection of light produced in LAr at 7 m from the photosensors has been achieved for the first time. It is worth pointing out that the excellent LAr purity and the large size of the detector have enabled to develop a unique data-driven investigation on aspects that are critical for LAr-based experiments but that are not completely understood. The analyses cover the characterization of the low-energy background detected by the PDS, the quantification of the electric field impact on the light yield, the evaluation of the Rayleigh scattering affecting the light propagation, and the analysis of the PMT detection efficiency. The effect of the VUV reflectivity of the detector materials will be also discussed. In addition, the estimation of the cosmic muon flux crossing the TPC and the study of the observed light yield by the PDS will be reported. Finally, the results from the simulation-based study of the supernova burst trigger capability with the PDS of a 12.1-kt active mass dual-phase LAr TPC as the one proposed for DUNE will be summarized. Several configurations of reflective foils installed in the TPC to enhance the light collection will be compared.

Gallego Ros, Ana↗

DOE OSTI2025

Measurement of Parity-Violating Modes of the Dark Energy Spectroscopic Instrument (DESI) Year 1 Luminous Red Galaxies' 4-Point Correlation Function

Here we report the first measurement of the parity-violating (PV) 4-Point Correlation Function (4PCF) of the Dark Energy Spectroscopic Instrument's Year 1 Luminous Red Galaxy (DESI Y1 LRG) sample, motivated by the potential detection of the PV 4PCF in the Sloan Digital Sky Survey Baryon Oscillation Spectroscopic Survey (SDSS BOSS) galaxies. In our auto-correlation ("auto") analysis, we find a statistically significant excess of the PV signal compared to mocks without any PV, at 4-10$σ$ depending on details of the analysis. This could arise either from genuine PV or from an underestimation of the variance in the mocks; it is unlikely to arise, at the signal level, from a systematic. We then cross-correlate ("cross") the putative PV signal between different, independent patches of sky, and there find no detection of parity violation. The two measurements are in significant tension: while the cross has somewhat larger error bars than the auto, this is not sufficient to explain the discrepancy. We thus present the current work as an intriguing addition to the PV work on BOSS and as motivation for exploring further the relationship between the auto and cross PV 4PCF analyses.

Slepian, Zachary [Florida U.]↗

DOE OSTI2025

Project Title: Demonstration High Temperature Superconducting NonPlanar Stellarator Magnet with Advanced Manufactured Assemblies

This is the final report for the project “Demonstration High Temperature Superconducting Non- Planar Stellarator Magnet with Advanced Manufactured Assemblies”, funded by DOE, and performed by Type One Energy from September, 2020, to March 2024 involving the Fusion Technology Institute at the University of Wisconsin–Madison, the Plasma Science and Fusion Center (PSFC) at the Massachusetts Institute of Technology (MIT) and Commonwealth Fusion Systems (CFS) to design and fabricate the first non-planar HTS (REBCO) coil for a high-field stellarator based on the SPARC tokamak’s VIPER cable concept. Stellarators at high fields make high-temperature superconducting magnets necessary for a compact fusion device. But the asymmetric and non-planar nature of its components, especially the magnets make it difficult for scalable producibility. To address these challenges, two promising technologies have emerged: advanced manufacturing (AM) for the supporting plates for forming the magnets, and high-temperature superconducting (HTS) cables inside the plates. AM has advanced enough to produce stellarator components with the necessary geometric complexity, size, and the precision, leading to potentially significant reductions in production time, cost, and waste. The cost of HTS tape has decreased dramatically, and progress in HTS planar magnet development has reached a point where it can be proposed for application to complex 3D non-planar magnets. The main objective of this project is to develop, demonstrate and pre-commercialize a novel, non-planar HTS coil shape that remains superconducting to achieve production scalable reductions in time and cost and performance. The proposed technology is based on the novel concept of a precision sub-scale HTS nonplanar coil assembly. This project focuses on the design, fabrication, material optimization of cable design, and validation and demonstration of the high current carrying capability of superconducting magnets and their support in a complex 3D shape needed for application to stellarator magnetic plasma confinement. The specific objectives of this research program include: (1) The successful application of metal AM to build a precision sub-scale HTS nonplanar coil, (2) An HTS cable and cross-section design that can conform to the required nonplanar coil shape (bend radii as tight as 10-cm) and remains superconducting at an engineering current density of 1.35 kA/cm 2 at 77 K and 1 tesla at the conductor (5 kA in the cable). To achieve the above challenging goals, we have formed a multidisciplinary research team consisting of members from Type One Energy and UW-Madison, MIT PSFC and CFS with complementary skills and strong facilities. The team worked collaboratively on fundamental and applied research on the following three major technical areas: (1) Design, fabrication, and optimization of non-planar HTS Cable The ultimate goal of the project is to determine if commercial REBCO tapes and additive manufacturing can be used to fabricate high field (≥ 10T) non-planar coils with tight bending radii (≃ 100mm) and with a degradation of the critical current (Ic) smaller than 20% with respect to the expected performance. We started with shorter length cable to evaluate the scalability of the production process and eventually reached multiple turns for higher magnetic fields. Our findings suggest that a stellarator coil system of a relevant size, characterized by its asymmetric and non-planar components, can be fabricated using a formed cable in plate method. This system can be simulated using a large-scale modeling approach. The use of hybrid modeling 3 techniques will be pivotal in reducing the complexity of the model and in assessing expected performance in designs. (2) Modeling and simulation of the non-planar HTS Cable Multiphysics simulations are performed using the commercial software and are carried out in self-field conditions, involving 2D and 3D models and twisted around one slot of twist-pitched VIPER cable. Multiphysics simulations are mainly focused on the coil for the critical current evaluation, the magnetic field map, self-Lorentz forces and mechanical, and magnetothermal behavior and the quench dynamics. The detailed model and prediction of the superconducting performance of a stellarator-relevant demonstration cable from numerical simulations supports the results from the actual testing backing the results. A detailed description and results are provided in the later sections. (3) Design, fabrication, and optimization of support for the non-planar HTS Cable The team developed an additive manufactured (AM) coil positioning plate that formed into the required non-planar geometry (with bend radii as tight as 10-cm) and to acceptable tolerances required for a stellarator magnet: (+0.25-mm from ideal on dimensions of coil positioning plates and up to +1-mm from ideal for position of wound coil). The plate materials is also included in this selection process from fabrication and 3D printing perspective and commensurate with eventual application to a fusion reactor. From the cost effectiveness point of view, the HTS coil and plate has the potential to cost less than that made in conventional methods with less waste (<75% waste) reducing time (<50%) and cost (<50%), especially as the AM field matures. The application of advanced manufacturing in the construction of the support plates will also lead to cost reduction, as the cables can be easily replaced, thereby making the assembly modular. With such high primary cost and time savings, high current densities and magnetic field, the funded R&D work has validated the designs, proven the feasibility, and characterized the performance of the HTS coil and plate assembly, paving the way for a relevant-size stellarator coil system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

The use of subchondral bone topography to approximate the center of rotation of the elbow joint in dogs

Abstract Objectives The aim of this study was to compare the approximate center of rotation in normal and diseased elbows in dogs. Study design Cross‐sectional study Sample population Computer tomography scans of nine dogs with unilateral fragmented medial coronoid process (FMCP). Methods A board certified radiologist confirmed that each dog had unilateral FMCP, and a normal contralateral elbow. Digital 3D models of all elbow joints were uploaded into a surgical planning software package. Four axes approximating the center of rotation (COR) of elbow joints were generated using five geometric shapes based on subchondral topography of the humeral condyle radius and ulna. Images showing the locations where axes exited the medial and lateral cortex of the humeral condyle were captured and imported into a second software package, for measurement of distances between exit points and the origin of a system of axes. Results In normal joints 20/27 (74%) axes exited the medial cortex, and 25/27 (93%) axes exited the lateral cortex cranial and distal to the medial and lateral epicondyles, respectively. In diseased joints 22/27 (81%) axes exited medial cortex and 19/27 (70%) axes exited the lateral cortex, caudal and distal to the medial and lateral epicondyles, respectively. Conclusion Based on CT‐ derived geometry, the COR of elbow affected with FMCP was generally more caudal than normal. Clinical significance External landmarks approximating the location of the elbow COR are provided, and while not validated, may assist in planning, creation, and assessment of procedures for FMCP.

Berger, Chen↗

DOE OSTI2022

Simulation Studies of Intra-Train, Bunch-by-Bunch Feedback Systems at the International Linear Collider

The International Linear Collider (ILC) is a proposed electron-positron collider targeting collision energies from 250 GeV to 1 TeV. With design luminosities of order 10³⁴ cm²s⁻¹, a beam-based, intra-train feedback system would be required near the Interaction Point (IP) to provide nanometre-level stabilisation of the beam overlap in the collisions. Here we present results from beam-tracking simulations of the 500 GeV ILC, including the impact of beam-trajectory imperfections on the luminosity, and the capability of the IP feedback system to compensate for them. Effects investigated include the position jitter introduced by the damping ring extraction kicker, short-range and long-range wakefields, and ground motion. The feedback system was shown to be able to correct for beam-beam offsets of up to 200 nm and stabilise the collision overlap to the nanometre level, within a few bunch crossings.

Ramjiawan, R. L.↗

DOE OSTI2026

3D Tomography insights on particle-particle bonding in cold spray

The conditions of the target surface during cold spray affect deformation and bonding. While surface preparation can influence the adhesion of the first particles, such modification is not relevant to the particle-particle interfaces that dominate the growth of a coating. Here we study two-particle Cu stacks produced with a single-particle launch apparatus and compare them to single-particle experiments on a clean polished substrate. Serial cross-sectioning using microtomography permits a systematic evaluation and quantification of bonding at the particle-particle interfaces. We observe that the top particle in the two-particle stacks is much more flattened compared to single impacts on the polished substrate. Although the resulting interfacial area expansion is comparable to that of single impacts at the same velocities, bonding at the particle-particle interfaces is significantly less (never exceeding 18% even around the “optimal” velocity for bonding). Lastly, we find that hydrodynamic jetting, a form of localization known to promote adhesion in cold spray, is hindered for impacts on top of a prior particle deposition. Here, the results point to a need for future studies that separately consider topography and mechanical properties of substrates in the pursuit of optimal bonding.

Bonding↗

DOE OSTI2020

Grain Size Variations in the Murray Formation: Stratigraphic Evidence for Changing Depositional Environments in Gale Crater, Mars

The lowermost exposure of the Murray formation in Gale crater, Mars, was interpreted as sediment deposited in an ancient lake based on data collected by the Curiosity rover. Constraining the stratigraphic extent and duration of this environment has important implications for the paleohydrology of Gale. Insights into early Martian environments and paleofluid flow velocity can be obtained from grain size in rocks. Visual inspection of grain size is not always available for rocks investigated at field sites on Mars due to limited image coverage. But grain sizes can also be estimated from the Gini Index Mean Score, a grain-size proxy that uses point-to-point chemical variations in ChemCam Laser Induced Breakdown Spectroscopy data. Here, new Gini Index Mean Score results indicate that the Murray formation is dominated by mudstones with grains smaller than the spatial resolution of all rover cameras. Intervals of fine to coarse sandstone also are present, some of which are verified using observations of grain size and sedimentary structures in associated images. Overall, results demonstrate that most of the Murray consists of mudstone, suggesting settling of grains from suspension in low energy depositional environments such as lakes. Some of the mudstones contain desiccation cracks indicating periods of drying with a lowering of lake water level. However, beds and lenses of cross-bedded sandstones are common at specific intervals, suggesting episodes of fluvial and possibly eolian deposition. The persistence of lacustrine deposits interspersed with fluvial deposits suggests that liquid water was sustained on the Martian surface for tens of thousands to millions of years.

58 GEOSCIENCES↗

DOE OSTI2024

Elucidating the role of Cr migration in Ni-Cr exposed to molten FLiNaK via multiscale characterization

Structural materials used in nuclear reactor environments are subjected to coupled extremes such as high temperature, irradiation, and corrosion which act in concert to degrade their functional performance. Connecting alloy microstructure such as grain boundaries, and accumulating point defects with corrosion attack and pore morphology is critical to understanding underlying mechanisms. We uncover the compositional variations and morphology at multiple length scales in corrosion-damaged Ni-Cr alloy after exposure to oxidants in molten fluoride salts. A complex network of dense corrosion pores is detected by surface-level SEM observations. The corrosion pores take on a 1-dimensional morphology and are enriched with Ni and depleted of Cr 1–5 µm from the pore surface. STEM-EDS and 4D-STEM strain maps acquired simultaneously highlight the local variations in composition and structure of a ≤ 200 nm Cr-rich layer identified from a cross-section taken at the bottom of an isolated corrosion pore between the Ni-Cr alloy matrix and the embedded salt. However, the absence of an observed interface between the Ni-Cr alloy matrix and the FCC-structured Cr-rich layer suggests that Cr plating from the salt did not transpire. These findings support a proposed Cr lattice diffusion mechanism rather than Cr-precipitation from the salt to accommodate temperature transient conditions during sample cooling. Through the development of a 1D phase field model, these results are rationalized by formation energies for the Ni- and Cr-oxidation into the molten salt. This study reveals the locally altered microstructure caused by high temperature corrosion in non-steady-state molten salt nuclear reactor environments.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Magnetism and charge density wave order in kagome FeGe

Electron correlations often lead to emergent orders in quantum materials, and one example is the kagome lattice materials where topological states exist in the presence of strong correlations between electrons. This arises from the features of the electronic band structure that are associated with the kagome lattice geometry: flat bands induced by destructive interference of the electronic wavefunctions, topological Dirac crossings, and a pair of van Hove singularities. Various correlated electronic phases have been discovered in kagome lattice materials, including magnetism, charge density waves, nematicity, and superconductivity. Recently, a charge-density wave was discovered in the magnetic kagome FeGe, providing a platform for understanding the interplay between charge order and magnetism in kagome materials. Here, we observe all three electronic signatures of the kagome lattice in FeGe using angle-resolved photoemission spectroscopy. The presence of van Hove singularities near the Fermi level is driven by the underlying magnetic exchange splitting. Furthermore, we show spectral evidence for the charge-density wave as gaps near the Fermi level. Furthermore, our observations point to the magnetic interaction-driven band modification resulting in the formation of the charge-density wave, and indicate an intertwined connection between the emergent magnetism and charge order in this moderately-correlated kagome metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗