Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Cross sections for the formation of Rb84m,g, Rb83, and Rb82m in Sr86(d,x) reactions up to deuteron energies of 49 MeV: Competition between α-particle and multinucleon emission processes

Cross sections of Sr86(d,x) reactions leading to the products Rb84m,g, Rb83, and Rb82m were measured by the stacked-sample activation technique up to deuteron energies of 49 MeV. Nuclear model calculations were performed using the codes talys and empire, which combine the statistical, precompound, and direct interaction components. In all cases, the empire results were much higher than the talys calculation. Fairly good agreement was obtained between measured data and the talys calculation after some optimization of the input model parameters. Insight into competition between α-particle and multinucleon emission in the Y88 compound-nucleus system was also gained.

59 ≤ A ≤ 89↗
DOE OSTI2023

COVID-19 vaccination status, side effects, and perceptions among breast cancer survivors: a cross-sectional study in China

Introduction Breast cancer is the most prevalent malignancy in patients with coronavirus disease 2019 (COVID-19). However, vaccination data of this population are limited. Methods A cross-sectional study of COVID-19 vaccination was conducted in China. Multivariate logistic regression models were used to assess factors associated with COVID-19 vaccination status. Results Of 2,904 participants, 50.2% were vaccinated with acceptable side effects. Most of the participants received inactivated virus vaccines. The most common reason for vaccination was “fear of infection” (56.2%) and “workplace/government requirement” (33.1%). While the most common reason for nonvaccination was “worry that vaccines cause breast cancer progression or interfere with treatment” (72.9%) and “have concerns about side effects or safety” (39.6%). Patients who were employed (odds ratio, OR = 1.783, p = 0.015), had stage I disease at diagnosis (OR = 2.008, p = 0.019), thought vaccines could provide protection (OR = 1.774, p = 0.007), thought COVID-19 vaccines were safe, very safe, not safe, and very unsafe (OR = 2.074, p < 0.001; OR = 4.251, p < 0.001; OR = 2.075, p = 0.011; OR = 5.609, p = 0.003, respectively) were more likely to receive vaccination. Patients who were 1–3 years, 3–5 years, and more than 5 years after surgery (OR = 0.277, p < 0.001; OR = 0.277, p < 0.001, OR = 0.282, p < 0.001, respectively), had a history of food or drug allergies (OR = 0.579, p = 0.001), had recently undergone endocrine therapy (OR = 0.531, p < 0.001) were less likely to receive vaccination. Conclusion COVID-19 vaccination gap exists in breast cancer survivors, which could be filled by raising awareness and increasing confidence in vaccine safety during cancer treatment, particularly for the unemployed individuals.

Xu, Yali↗
DOE OSTI2023

A Tutorial for Generating Correlated Random Samples in the Context of Replica Cross Section Data Used in the Propagation of Uncertainty (Second Edition)

The following sample problem write-ups are designed as a tutorial for generating correlated random samples (e.g., replica multi-group cross section data) for use in propagation of uncertainty problems. These problems were set up and solved in MATLAB, but any programming environment with basic statistical functions can be used to generate similar results. Since linear sample problems were chosen, helpful comparisons to the “sandwich” rule propagation of uncertainty are available and were used.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Particle Migration in Large Cross-Section Ceramic On-Demand Extrusion Components

Ceramic On-Demand Extrusion (CODE) is a direct ink writing process which allows for the creation of near theoretically dense ceramic components with large cross-sections due to oil-assisted drying. Here, Yttria-stabilized zirconia (YSZ) colloidal pastes were used in CODE to produce dense (multi-road infill and ≳ 98% relative density), large continuous volume (> 1 cm 3 ), and high fidelity (nozzle diameters ≲ 1 mm) structural ceramic components with nanoparticle feedstocks (~d 50 ≲ 1 µm). However, many of these printed components underwent significant particle migration after forming. The reason for this particle migration defect was investigated using the coffee-ring effect for dilute solutions and rheological methods for dense suspensions. Modifications to the colloidal paste, such as changes in solids loading, pH, or surfactant concentration were explored as to their effectiveness to mitigate the defect. Ultimately, paste formulation and printing trade-offs are discussed with respect to the post-printing defect and as to general direct-write patterning.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Measurement of the cross section of the Q=4.4398 MeV 12 C (n, n'γ) reaction from threshold to 16.5 MeV using γ and correlated n–γ detection

The Q=4.4398 MeV 12 C (n, n'γ) cross section was measured using a white incident neutron source through the detection of γ rays only and n–γ coincidences using a segmented liquid scintillator detector array. While the n–γ technique utilized here is more generally applicable to a wide variety of neutron scattering measurements, the γ-only technique was successfully applied to this reaction to exploit the precise time resolution and high efficiency of this detection system to yield results with unprecedented statistical precision and total uncertainties < 2 % from reaction threshold up to 16 MeV incident neutron energy, clearly resolving many features in this reaction that were previously not well known. The γ-only and n–γ results are consistent with each other for the majority of the incident energy range covered in this paper, thereby lending validation to the n–γ technique for future measurements, though significant disagreements are observed between both results and with the ENDF/B-VIII.0 nuclear data evaluation. These differences are particularly noticeable in the recently evaluated energy range below 6.5 MeV, and also near 14 MeV where a “sawtooth”-like feature is observed similar to that in other 12 C+n reaction channels. Finally, both γ-only and n–γ results are presented here with thorough covariance derivations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

New 13 C(α,n) 16 O Cross Section with Implications for Neutrino Mixing and Geoneutrino Measurements

Precise antineutrino measurements are very sensitive to proper background characterization. Here, we present an improved measurement of the 13 C(α,n) 16 O reaction cross section which constitutes significant background for large v¯ detectors. We greatly improve the precision and accuracy by utilizing a setup that is sensitive to the neutron energies while making measurements of the excited state transitions via secondary γ-ray detection. Our results shows a 54% reduction in the background contributions from the 16 O(3–, 6.13 MeV) state used in the KamLAND analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Measurement of the cross section for electroweak production of a Z boson, a photon and two jets in proton-proton collisions at $\sqrt{s} =$ 13 TeV and constraints on anomalous quartic couplings

A measurement is presented of the cross section for electroweak production of a Z boson and a photon in association with two jets (Zγjj) in proton-proton collisions. The Z boson candidates are selected through their decay into a pair of electrons or muons. The process of interest, electroweak Zγjj production, is isolated by selecting events with a large dijet mass and a large pseudorapidity gap between the two jets. The measurement is based on data collected at the CMS experiment at $ \sqrt{s} $ = 13 TeV, corresponding to an integrated luminosity of 35.9 fb$^{−1}$. The observed significance of the signal is 3.9 standard deviations, where a significance of 5.2 standard deviations is expected in the standard model. These results are combined with published results by CMS at $ \sqrt{s} $ = 8 TeV, which leads to observed and expected respective significances of 4.7 and 5.5 standard deviations. From the 13 TeV data, a value is obtained for the signal strength of electroweak Zγjj production and bounds are given on quartic vector boson interactions in the framework of dimension-eight effective field theory operators.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Modeling of Additively Manufactured Ceramic Heat Exchangers with Semi-Elliptical Cross-Section Flow Channels

An approximate and easily applied analytical model was developed for heat transfer calculations of heat exchangers consisting of multiple rows and columns of heat transfer fluid flow channels with semi-elliptical cross sections. Heat exchangers of this type are being developed by using ceramic material and additive manufacturing for high temperature and pressure-concentrating solar electric power plants. Calculations using the model require only the geometrical dimensions and flow conditions of the heat exchanger. Comparisons of modeling predictions, with both simulation results and experimental data, were conducted to verify the viability of the model. The results showed good agreement where almost all the modeling predictions were within 20% of the simulation results or the experimental data. Finally, the proposed modeling approach is more generally applicable to heat transfer analysis of heat exchangers with similar flow channel configurations to those considered in this study.

Ceramic↗
DOE OSTI2021

Uranium Carbide and Uranium-Metal Thermal Scattering Law Evaluations and Cross Sections [Slides]

New Uranium Carbide and Uranium Metal evaluations have been developed using the FLASSH platform. Ab initio LD/MD models converged electronic, magnetic, and dynamical properties and demonstrate good agreement with experimental data. Thermal scattering cross sections generate inelastic and elastic thermal neutron scattering libraries in FLASSH . New TSL evaluations occurred in the production of ENDF File 7 data for Uranium Carbide and Uranium Metal submitted to NNDC for ENDF/B-VIII.1 release.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Comparison of differential elastic cross sections in $pp$ and $p\bar{p}$ collisions as evidence of the existence of the colourless $C$-odd three-gluon state

We analyze the differences between the $pp$ and $p\bar{p}$ differential elastic cross section measurements by theD0 and TOTEM Collaborations at the Tevatron, Fermilab, and the LHC, CERN that lead to a significance larger than 3$\sigma$ of the existence of thecolourless $C$-odd three-gluon state, the odderon.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurement of H(e,e’) and D(e,e’) Cross-Sections for Bloom-Gilman Quark-Hadron Duality Study

The E12-10-002 experiment which ran in 2018 in Hall C at the Thomas Jefferson National Accelerator Facility measured the inclusive electron scattering cross-sections for hydrogen and deuterium. This was the first experiment conducted with the new Super High-Momentum Spectrometer and accompanying instrumentation. These measurements extend the previous Hall C measurements up to Q2 = 16 GeV2. This dissertation presents the analyses of the new detectors and shows the preliminary results for F2 structure function and the study of quark-hadron duality in the four nucleon-resonance regions.

Sun, Abel↗
DOE OSTI2022

140,142 Ce Neutron Cross Section Resolved Resonance Region Evaluation [Slides]

ORNL has completed new RRR evaluations for 140,142 Ce. A lack of integral measurements made validation difficult, but the difference from Kadonis values suggests that more investigation of capture cross section is warranted. The complete file (with updated File2 and File32) has been submitted to NNDC repository for inclusion in next release of ENDF. A sponsor report publication is in progress.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Measurement and QCD analysis of double-differential inclusive jet cross sections in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of the inclusive jet production in proton-proton collisions at the LHC at $ \sqrt{s} $ = 13 TeV is presented. The double-differential cross sections are measured as a function of the jet transverse momentum p$_{T}$ and the absolute jet rapidity |y|. The anti-k$_{T}$ clustering algorithm is used with distance parameter of 0.4 (0.7) in a phase space region with jet p$_{T}$ from 97 GeV up to 3.1 TeV and |y| < 2.0. Data collected with the CMS detector are used, corresponding to an integrated luminosity of 36.3 fb$^{-1}$ (33.5 fb$^{-1}$). The measurement is used in a comprehensive QCD analysis at next-to-next-to-leading order, which results in significant improvement in the accuracy of the parton distributions in the proton. Simultaneously, the value of the strong coupling constant at the Z boson mass is extracted as α$_{S}$(m$_{Z}$) = 0.1170±0.0019. For the first time, these data are used in a standard model effective field theory analysis at next-to-leading order, where parton distributions and the QCD parameters are extracted simultaneously with imposed constraints on the Wilson coefficient c$_{1}$ of 4-quark contact interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurement of Born cross section of $$ {e}^{+}{e}^{-}\to {\Sigma}^{+}{\overline{\Sigma}}^{-} $$ at center-of-mass energies between 3.510 and 4.951 GeV

Abstract Using 24.1 fb −1 ofe + e − collision data collected with the BESIII detector at the BEPCII collider, the Born cross sections and effective form factors of the$$ {e}^{+}{e}^{-}\to {\Sigma}^{+}{\overline{\Sigma}}^{-} $$ e + e − → Σ + Σ ¯ − reaction are measured. The measurements are performed at center-of-mass energies ranging from 3.510 to 4.951 GeV. No significant evidence for the decay of the charmonium(-like) states,ψ(3770),ψ(4040),ψ(4160),Y(4230),Y(4360),ψ(4415), andY(4660), into a$$ {\Sigma}^{+}{\overline{\Sigma}}^{-} $$ Σ + Σ ¯ − final state is observed. Consequently, upper limits for the products of the branching fractions and the electronic partial widths at the 90% confidence level are reported for these decays.

Physics↗
DOE OSTI2020

Measurement of 139 La(p,x) cross sections from 35–60 MeV by stacked-target activation

A stacked-target of natural lanthanum foils (99.9119% 139 La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. 139 La(p,x) cross sections are reported between 35–60 MeV for nine product radionuclides. The primary motivation for this measurement was the need to quantify the production of 134 Ce. As a positron-emitting analogue of the promising medical radionuclide 225 Ac, 134 Ce is desirable for in vivo applications of bio-distribution assays for this emerging radio-pharmaceutical. Finally, the results of this measurement were compared to the nuclear model codes TALYS, EMPIRE and ALICE (using default parameters), which showed significant deviation from the measured values.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Cross-section of electrical impact excitation in bulk n-type monocrystalline Al:Cr:ZnSe

Middle-infrared luminescence of bulk Al:Cr:ZnSe crystal under direct electrical excitation of Cr 2+ , 5 E− 5 T 2 transition, is reported. Effective cross-section of electrical excitation was estimated based on comparative luminescence measurements under electrical and optical (1560 nm) excitations. Calculation of the threshold current density for lasing under electrical excitation of this material was also performed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

First Measurements of Differential Cross Sections In Kinematic Imbalance Variables With The MicroBooNE Detector

Making high-precision measurements of neutrino oscillation parameters requires an unprecedented understanding of neutrino-nucleus scattering. In this presentation, we present the first muon neutrino charged current double-differential cross sections in kinematic imbalance variables. These variables characterize the imbalance in the plane transverse to an incoming neutrino. We use events with a single muon above 100 MeV/c, a single final state proton above 300 MeV/c, and no recorded final state pions. Thus, these variables act as a direct probe of nuclear effects such as final state interactions, Fermi motion, and multi-nucleon processes. We also present a complementary ongoing analysis using electron neutrinos. This channel is of the utmost importance for the extraction of neutrino oscillation parameters by making high-precision measurements. Our measurements allow us to constrain systematic uncertainties associated with neutrino oscillation results performed by near-future experiments of the Short Baseline Neutrino (SBN) program, as well as by future large-scale experiments like DUNE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

First Measurements of Differential Cross Sections In Kinematic Imbalance Variables With The MicroBooNE Detector

Making high-precision measurements of neutrino oscillation parameters requires an unprecedented understanding of neutrino-nucleus scattering. In this presentation, we present the first muon neutrino charged current double-differential cross sections in kinematic imbalance variables. These variables characterize the imbalance in the plane transverse to an incoming neutrino. We use events with a single muon above 100 MeV/c, a single final state proton above 300 MeV/c, and no recorded final state pions. Thus, these variables act as a direct probe of nuclear effects such as final state interactions, Fermi motion, and multi-nucleon processes. We also present a complementary ongoing analysis using electron neutrinos. This channel is of the utmost importance for the extraction of neutrino oscillation parameters by making high-precision measurements. Our measurements allow us to constrain systematic uncertainties associated with neutrino oscillation results performed by near-future experiments of the Short Baseline Neutrino (SBN) program, as well as by future large-scale experiments like DUNE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗