SEARCH · Engineering Papers

Results for “Critical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Upper critical field of high temperature Y(1.2)Ba(0.8)CuO(4-delta) superconductor

A 20-T high-field magnet is used to measure electrical resistance as a function of temperature in the Y(1.2)Ba(0.8)CuO(4-delta) superconductor. The temperature dependence of the critical field, Hc2(T), is obtained from the superconduction transition. A Hc2(O) value of 166T is determined which is the highest critical field yet reported. Results show Y(1.2)Ba(0.8)CuO(4-delta) to be a 90K Type-II superconductor, with a lower critical field Hc1(O) of about 0.2T and a penetration depth of about 290 A.

Hor, P. H.↗

NASA NTRS1988

Interfacial tension and vapor-liquid equilibria in the critical region of mixtures

In the critical region, the concept of two-scale-factor universality can be used to accurately predict the surface tension between near-critical vapor and liquid phases from the singularity in the thermodynamic properties of the bulk fluid. In the present work, this idea is generalized to binary mixtures and is illustrated using the data of Hsu et al. (1985) for CO2 + n-butane. The pressure-temperature-composition-density data for coexisting, near-critical phases of the mixtures are fitted with a thermodynamic potential comprised of a sum of a singular term and nonsingular terms. The nonuniversal amplitudes characterizing the singular term for the mixtures are obtained from the amplitudes for the pure components by interpolation in a space of thermodynamic 'field' variables. The interfacial tensions predicted for the mixtures from the singular term are within 10 percent of the data on three isotherms in the pressure range (Pc - P)/Pc of less than 0.5. This difference is comparable to the combined experimental and model errors.

Moldover, Michael R.↗

NASA NTRS1988

The prediction and confirmation of critical epitaxial parameters

The coherency-incoherency transition in epitaxial crystals is said to take place at a critical misfit f(c) or, for a system in which a monolayer is subcritical, at a critical thickness h(c). In this paper, the physical principles and models used to predict critical parameters are analyzed and put into perspective. The dependence of the relevant principles on the equilibrium-nonequilibrium conditions under which the quantities are measured in practice is stressed. The advantages and disadvantages of the models used (essentially the Frenkel-Kontorowa and Volterra models) are highlighted.

Van Der Merwe, Jan↗

NASA NTRS1988

Transport critical current and magnetization measurements of melt-processed YBa2Cu3O(7-x)

This paper reports on the magnetic field dependence of the transport critical current and dc magnetic susceptibility measurements on YBa2Cu3O(7-x) superconductors formed by melt-solid reactions at 950 C between Ba-Cu-O (or Tb-Ba-cu-O) and solid nonstoichiometric Y-Ba-Cu oxide. Four-probe dc critical current measurements at 77, 64, and 4.2 K show strong depression of the critical current density with increasing magnetic field, in agreement with a model of weakly linked superconducting regions. Diamagnetic shielding and Meissner flux expulsion measurements in the temperature range 10-300 K show about one-third volume fraction of perfect superconductivity. Both shielding and flux expulsion were observed to be approximately temperature independent below 60 K, indicating strong coupling between the grains throughout the entire volume below this temperature.

Hermann, A. H.↗

NASA NTRS1988

The critical complex in nucleation is not the nucleus

A theory of nucleation is presented which combines features of classical nucleation. In this theory, the nucleus is a cluster of finite size with a sharp interface and spinodal decomposition, in which a fluctuation in density or composition generates the critical complex and nucleus. Thus, the nucleus is a product of nucleation. Schematic models for the classical and the proposed routes to nucleation are compared, focusing on the relation between pressure and volume in the models. In the proposed model, the critical complex, or critical state, is between the parent state and the nucleus.

Rasmussen, Don H.↗

NASA NTRS1990

Critical point wetting drop tower experiment

The 100 m Drop Tower at NASA-Marshall was used to provide the step change in acceleration from 1.0 to 0.0005 g. An inter-fluid meniscus oscillates vertically within a cylindrical container when suddenly released from earth's gravity and taken into a microgravity environment. Oscillations damp out from energy dissipative mechanisms such as viscosity and interfacial friction. Damping of the oscillations by the later mechanism is affected by the nature of the interfacial junction between the fluid-fluid interface and the container wall. In earlier stages of the project, the meniscus shape which developed during microgravity conditions was applied to evaluations of wetting phenomena near the critical temperature. Variations in equilibrium contact angle against the container wall were expected to occur under critical wetting conditions. However, it became apparent that the meaningful phenomenon was the damping of interfacial oscillations. This latter concept makes up the bulk of this report. Perfluoromethyl cyclohexane and isopropanol in glass were the materials used for the experiment. The wetting condition of the fluids against the wall changes at the critical wetting transition temperature. This change in wetting causes a change in the damping characteristics of the interfacial excursions during oscillation and no measurable change in contact angle. The effect of contact line friction measured above and below the wetting transition temperature was to increase the period of vertical oscillation for the vapor-liquid interface when below the wetting transition temperature.

Kaukler, William F.↗

NASA NTRS1990

SR90, strontium shaped-charge critical ionization velocity experiment

In May 1986 an experiment was performed to test Alfven's critical ionization velocity (CIV) effect in free space, using the first high explosive shaped charge with a conical liner of strontium metal. The release, made at 540 km altitude at dawn twilight, was aimed at 48 deg to B. The background electron density was 1.5 x 10(exp 4) cu cm. A faint field-aligned Sr(+) ion streak with tip velocity of 2.6 km/s was observed from two optical sites. Using two calibration methods, it was calculated that between 4.5 x 10(exp 20) and 2 x 10(exp 21) ions were visible. An ionization time constant of 1920 s was calculated for Sr from the solar UV spectrum and ionization cross section which combined with a computer simulation of the injection predicts 1.7 x 10(exp 21) solar UV ions in the low-velocity part of the ion streak. Thus all the observed ions are from solar UV ionization of the slow (less than critical) velocity portion of the neutral jet. The observed neutral Sr velocity distribution and computer simulations indicate that 2 x 10(exp 21) solar UV ions would have been created from the fast (greater than critical) part of the jet. They would have been more diffuse, and were not observed. Using this fact it was estimated that any CIV ions created were less than 10(exp 21). It was concluded that future Sr CIV free space experiments should be conducted below the UV shadow height and in much larger background plasma density.

Wescott, Eugene M.↗

NASA NTRS1989

NASA-LaRc Flight-Critical Digital Systems Technology Workshop

The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

Meissner, C. W., Jr.↗

NASA NTRS1990

Critical-point analysis of the liquid-vapor interfacial surface tension

The interfacial surface tension of the liquid-vapor system is analyzed near the critical point in a manner similar to bulk thermodynamic critical-point analyses. This is accomplished by a critical-point analysis of the single-phase hard-wall surface tension. Both a Landau expansion and a scaling theory equation of state are investigated. Some general exponent relations are derived and, in addition, some thermodynamically defined correlation lengths are discussed.

Salvino, R. E.↗

NASA NTRS1989

Critical transport parameters for porous media subjected to counterflow

Experimental and theoretical studies have been conducted to determine critical parameters at the onset of nonlinear counterflow in He II below the lambda point of He-4. Critical temperature differences have been measured in porous media for zero net mass flow and for Darcy permeabilities in the order of magnitude range from 10 to the -10th to 10 to the -8th sq cm. The normalized critical temperature gradients, which covered the liquid temperature range of 1.5 K to the lambda temperature, are found to vary with T proportional to the ratio of the superfluid density to the normal fluid density. This liquid temperature dependence appears to be consistent with duct data which are limited at low temperature by a Reynolds number criterion.

Frederking, T. H. K.↗

NASA NTRS1991

Critical behavior of two-dimensional vesicles in the deflated regime

The critical behavior of two-dimensional vesicles in the deflated regime is studied analytically using a mapping onto a gauge model, scaling arguments, and exact inequalities. In agreement with the results of earlier studies the critical behavior is governed by a branched-polymer fixed point. The shape of the critical line in the gauge model is deduced in the weak and in the infinitely deflated regime.

Banavar, Jayanth R.↗

NASA NTRS1991

Formulation of a strategy for monitoring control integrity in critical digital control systems

Advanced aircraft will require flight critical computer systems for stability augmentation as well as guidance and control that must perform reliably in adverse, as well as nominal, operating environments. Digital system upset is a functional error mode that can occur in electromagnetically harsh environments, involves no component damage, can occur simultaneously in all channels of a redundant control computer, and is software dependent. A strategy is presented for dynamic upset detection to be used in the evaluation of critical digital controllers during the design and/or validation phases of development. Critical controllers must be able to be used in adverse environments that result from disturbances caused by an electromagnetic source such as lightning, high intensity radiated field (HIRF), and nuclear electromagnetic pulses (NEMP). The upset detection strategy presented provides dynamic monitoring of a given control computer for degraded functional integrity that can result from redundancy management errors and control command calculation error that could occur in an electromagnetically harsh operating environment. The use is discussed of Kalman filtering, data fusion, and decision theory in monitoring a given digital controller for control calculation errors, redundancy management errors, and control effectiveness.

Belcastro, Celeste M.↗

NASA NTRS1992

Study of density distribution in a near-critical simple fluid (19-IML-1)

This experiment uses visual observation, interferometry, and light scattering techniques to observe and analyze the density distribution in SF6 above and below the critical temperature. Below the critical temperature, the fluid system is split up into two coexisting phases, liquid and vapor. The spatial separation of these phases on earth, liquid below and vapor above, is not an intrinsic property of the fluid system; it is merely an effect of the action of the gravity field. At a fixed temperature, the density of each of the coexisting phases is in principle fixed. However, near T sub c where the fluid is strongly compressible, gravity induced hydrostatic forces will result in a gradual decrease in density with increasing height in the sample container. This hydrostatic density profile is even more pronounced in the one phase fluid at temperatures slightly above T sub c. The experiment is set up to study the intrinsic density distributions and equilibration rates of a critical sample in a small container. Interferometry will be used to determine local density and thickness of surface and interface layers. The light scattering data will reveal the size of the density fluctuations on a microscopic scale.

Michels, Teun↗

NASA NTRS1992

Accuracy of critical-temperature sensitivity coefficients predicted by multilayered composite plate theories

An assessment is made of the accuracy of the critical-temperature sensitivity coefficients of multilayered plates predicted by different modeling approaches, based on two-dimensional shear-deformation theories. The sensitivity coefficients considered measure the sensitivity of the critical temperatures to variations in different lamination and material parameters of the plate. The standard of comparison is taken to be the sensitivity coefficients obtained by the three-dimensional theory of thermoelasticity. Numerical studies are presented showing the effects of variation in the geometric and lamination parameters of the plate on the accuracy of both the sensitivity coefficients and the critical temperatures predicted by the different modeling approaches.

Noor, Ahmed K.↗

NASA NTRS1993

Numerical Study of the Transient Vaporization of an Oxygen Droplet at Sub- and Super-Critical Conditions

Unsteady vaporization of a droplet in a high-pressure quiescent environment has been studied. With spherical symmetry and constant pressure, the process is diffusion controlled. At low pressures droplet heating is significant for most of the droplet lifetime, and an unsteady analysis of the gas phase is required. Then, the vaporization of a liquid oxygen droplet in gaseous hydrogen at moderate and high pressures is considered. At super-critical pressures, the surface temperature reaches the computed critical mixture value where a model for super-critical combustion is needed. The details of the diffusion layer of dissolved hydrogen do not significantly affect the results. Various methods are explored to compute the gas-phase density. Under the model's assumptions, homogeneous nucleation is not likely to occur.

Delplanque, J.-P.↗

NASA NTRS1945

Effect of Normal Pressure on the Critical Compressive and Shear Stress of Curved Sheet

Results are presented of tests of two sets of 20 curved-sheet specimens to determine the effect of normal pressure on the critical compressive and shear stress of curved sheets. It was found that normal pressure raised the critical compressive and shear stress of curved sheets except when outward bulging occurred in compression, in which case the critical stress was lowered by normal pressure. (author)

Rafel, Norman↗

NASA NTRS1946

Critical Mach Numbers of Thin Airfoil Sections with Plain Flaps

Critical Mach number as function of lift coefficient is determined for certain moderately thick NACA low-drag airfoils. Results, given graphically, included calculations on same airfoil sections with plain flaps for small flap deflections. Curves indicate optimum critical conditions for airfoils with flaps in such form that they can be compared with corresponding results for zero flap deflections. Plain flaps increase life-coefficient range for which critical Mach number is in region of high values characteristic of low-drag airfoils.

AIRFOILS - NACA 651-208 - CHARACTERISTICS LOW-DRAG↗

NASA NTRS1943

Effect of Normal Pressure on the Critical Shear Stress of Curved Sheet

In order to determine the critical stresses caused by an outward acting pressure on the upper surface of a wing due to the difference in internal and external pressures, torsional tests were made on two curved-sheet specimens subjected to an outward acting normal pressure. Results show that an outward acting normal pressure appreciable raises the critical shear stress for an unstiffened curved sheet; the absolute increase in critical shear stress is slightly greater for a 30 in. rib spacing than for a 10 in. rib spacing.

TESTING MACHINES, STRESS - NACA↗