Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Influence of Charge Transport Layers on Capacitance Measured in Halide Perovskite Solar Cells

Capacitance-based techniques were previously used to measure the electrical properties of halide perovskite solar cells (PSCs) such as defect activation energy and density, carrier concentration, and dielectric constant, which provide key information for evaluating the device performance. Herein, we show that capacitance-based techniques cannot be used to reliably analyze the properties of defects in the perovskite layer or at its interface, since the high-frequency capacitance signature is due to the response of charge carriers in the hole-transport layer (HTL). For HTL-free PSCs, the high-frequency capacitance can be considered as the geometric capacitance for analyzing the dielectric constant of the perovskite layer, since there is no trapping and de-trapping of charge carriers in the perovskite layer. We also find that the low-frequency capacitance signature can be used to calculate the activation energy of the ionic conductivity of the perovskite layer, but the overlapping effects with charge transport materials must be avoided.

14 SOLAR ENERGY↗
DOE OSTI2020

Kinetic study of reaction C 2 H 5 + HO 2 in a photolysis reactor with time-resolved Faraday rotation spectroscopy

The rate constant and branching ratios of ethyl reaction with hydroperoxyl radical, C 2 H 5 + HO 2 (1), a key radical-radical reaction for intermediate temperature combustion chemistry, were measured in situ for the first time in a photolysis Herriott cell by using mid-IR Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS). The microsecond time-resolved diagnostic technique in this work enabled the direct rate measurements of the target reaction at 40 and 80 mbar and reduced the experimental uncertainty considerably. C 2 H 5 and HO 2 radicals were generated by the photolysis of (COCl) 2 /C 2 H 5 I/CH 3 OH/O 2 /He mixture at 266 nm. By direct measurements of the transient profiles of C 2 H 5 , HO 2 and OH concentrations, the overall rate constant for this reaction at 297 K was determined as k 1 (40 mbar) = (3.8 ± 0.8) × 10 –11 cm 3 molecule –1 s –1 and k 1 (80 mbar) = (4.1 ± 1.0) × 10 –11 cm 3 molecule –1 s –1 . As a result, the direct observation of hydroxyl radical (OH) indicated that OH formation channel was the major channel with a branching ratio of 0.8 ± 0.1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

From PAH to fullerenes: Closing a nano bowl with a nano lid

Quantum chemical DLPNO-CCSD(T)/cc-pVDZ//B3LYP/6–31G(d) calculations have been performed to unravel the formation mechanism of buckminsterfullerene (C 60 ) via the reaction of the C 40 nano bowl (C 40 H 10 ) and corannulene (C 20 H 10 ). The generated potential energy surfaces and molecular properties were further utilized to evaluate equilibrium constants and rate constants of elementary chemical reactions involved in the C 60 synthesis. The overall C 40 H 10 + C 20 H 10 → C 60 + 10H 2 reaction is shown to be highly exoergic and hence thermodynamically favorable at temperatures above 700 K and a kinetically feasible pathway under high-temperature conditions was revealed. This route involves hydrogen atom abstraction steps to activate closed-shell reactants/intermediates alternating with cyclodehydrogenation reactions eventually zipping the edges between the reacting C 40 and C 20 units by consecutive closures of six- and five-membered rings between them. The reaction is driven/catalyzed by hydrogen atoms which carry out the hydrogen abstractions from C 60 H x and are later recovered on the cyclodehydrogenation stages. The initial association reaction, C 40 H 9 + C 20 H 10 → C 60 H 18 + H, linking the two units by a covalent C-C bond appears to represent the kinetic bottleneck of the whole multistep process. This reaction is fast at low temperatures but slows down and has its equilibrium shifted toward the reactants at high temperatures. Here, the feasibility of the proposed mechanism corroborates the hypothesis that C 60 can be produced through a series of elementary reactions typical for the PAH growth.

Equilibrium constant↗
DOE OSTI2024

Applying a Phase-Separation Parameterization in Modeling Secondary Organic Aerosol Formation from Acid-Driven Reactive Uptake of Isoprene Epoxydiols under Humid Conditions

Secondary organic aerosol (SOA) from acid-driven reactive uptake of isoprene epoxydiols (IEPOX) contributes up to 40% of organic aerosol (OA) mass in fine particulate matter. Our previous work showed substantial conversions of particulate inorganic sulfates to surface-active organosulfates (OSs) by IEPOX decreases aerosol acidity and creates a viscous organic-rich shell that poses as a diffusion barrier, inhibiting additional reactive uptake of IEPOX. In this study, to account for this “self-limiting” effect, a phase-separation box model was developed to evaluate parameterizations of IEPOX reactive uptake against time-resolved chamber measurements of IEPOX-SOA tracers, including 2-methyltetrols (2-MT) and methyltetrol sulfates (MTS), at ~ 50% relative humidity. The phase-separation model was most sensitive to mass accommodation coefficient, IEPOX diffusivity in the organic shell, and ratio of the third-order reaction rate constants forming 2-MT and MTS (k MT /k MTS ). In particular, k MT /k MTS had to be lower than 0.1 to bring model predictions of 2-MT and MTS in closer agreement with chamber measurements, while prior studies reported values larger than 0.71. The model-derived rate constants favor more particulate MTS formation due to 2-MT likely off-gassing at ambient-relevant OA loadings. Incorporating this parametrization into chemical transport models is expected to predict lower IEPOX-SOA mass and volatility due to the predominance of OSs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Breakdown of the Static Dielectric Screening Approximation of Coulomb Interactions in Atomically Thin Semiconductors

Coulomb interactions in atomically thin materials are remarkably sensitive to variations in the dielectric screening of the environment, which can be used to control exotic quantum many-body phases and engineer exciton potential landscapes. For decades, static or frequency-independent approximations of the dielectric response, where increased dielectric screening is predicted to cause an energy redshift of the exciton resonance, have been sufficient. These approximations were first applied to quantum wells and were more recently extended with initial success to layered transition metal dichalcogenides (TMDs). Here, we use charge-tunable exciton resonances to investigate screening effects in TMD monolayers embedded in materials with low-frequency dielectric constants ranging from 4 to more than 1000, a range of 2 orders of magnitude larger than in previous studies. In contrast to the redshift predicted by static models, we observe a blueshift of the exciton resonance exceeding 30 meV in higher dielectric constant environments. We explain our observations by introducing a dynamical screening model based on a solution to the Bethe-Salpeter equation (BSE). When dynamical effects are strong, we find that the exciton binding energy remains mostly controlled by the low-frequency dielectric response, while the exciton self-energy is dominated by the high-frequency one. Our results supplant the understanding of screening in layered materials and their heterostructures, introduce a knob to tune selected many-body effects, and reshape the framework for detecting and controlling correlated quantum many-body states and designing optoelectronic and quantum devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

EF-Hand Battle Royale: Hetero-ion Complexation in Lanmodulin

The lanmodulin (LanM) protein has emerged as an effective means for rare earth element (REE) extraction and separation from complex feedstocks without the use of organic solvents. Whereas the binding of LanM to individual REEs has been well characterized, little is known about the thermodynamics of mixed metal binding complexes (i.e., heterogeneous ion complexes), which limits the ability to accurately predict separation performance for a given metal ion mixture. In this paper, we employ the law of mass action to establish a theory of perfect cooperativity for LanM-REE complexation at the two highest-affinity binding sites. The theory is then used to derive an equation that explains the nonintuitive REE binding behavior of LanM, where separation factors for binary pairs of ions vary widely based on the ratio of ions in the aqueous phase, a phenomenon that is distinct from single-ion-binding chemical chelators. We then experimentally validate this theory and perform the first quantitative characterization of LanM complexation with heterogeneous ion pairs using resin-immobilized LanM. Importantly, the resulting homogeneous and heterogeneous constants enable accurate prediction of the equilibrium state of LanM in the presence of mixtures of up to 10 REEs, confirming that the perfect cooperativity model is an accurate mechanistic description of REE complexation by LanM. We further employ the model to simulate separation performance over a range of homogeneous and heterogeneous binding constants, revealing important insights into how mixed binding differentially impacts REE separations based on the relative positioning of the ion pairs within the lanthanide series. In addition to informing REE separation process optimization, these results provide mathematical and experimental insight into competition dynamics in other ubiquitous and medically relevant, cooperative binding proteins, such as calmodulin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Influence of intermolecular interactions on the infrared complex indices of refraction for binary liquid mixtures

This paper investigates the accuracy of deriving the composite optical constants of binary mixtures from only the complex indices of refraction of the neat materials. These optical constants enable the reflectance spectra of the binary mixtures to be modeled for multiple scenarios (e.g., different substrates, thicknesses, volume ratios), which is important for contact and standoff chemical detection. Using volume fractions, each mixture's complex index of refraction was approximated via three different mixing rules. To explore the impact of intermolecular interactions, these predictions are tested by experimental measurements for two representative sets of binary mixtures: (1) tributyl phosphate combined with n-dodecane, a non-polar medium, to represent mixtures which primarily interact via dispersion forces and (2) tributyl phosphate and 1-butanol to represent mixtures with polar functional groups that can also interact via dipole–dipole interactions, including hydrogen bonding. The residuals and the root-mean-square error between the experimental and calculated index values are computed and demonstrate that for miscible liquids in which the average geometry of the cross-interactions can be considered isotropic (e.g., dispersion), the refractive indices of the mixtures can be modeled using composite n and k values derived from volume fractions of the neat liquids. Conversely, in spectral regions where the geometry of the cross-interactions is more restricted and anisotropic (e.g., hydrogen bonding), the calculated n and k values vary from the measured values. The impact of these interactions on the reflectance spectra are then compared by modeling a thin film of the binary mixtures on an aluminum substrate using both the measured and the mathematically computed indices of refraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impacts of molecular architecture on the radiation-induced degradation and reaction kinetics of hydrophobic diglycolamides with the solvated electron and the dodecane radical cation

Given their proposed use as trivalent actinide–lanthanide separation ligands, the role of molecular architecture on the radiation robustness of diglycolamide (DGA) molecules has been investigated. This study examined three prototypical molecules with differences in their aliphatic chain architecture: N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA), N,N,N′,N′-tetra(2-ethylhexyl)diglycolamide (T2EHDGA), and N,N′-dimethyl-N,N′-dioctyldiglycolamide (DMDODGA). Rate coefficients and activation parameters are reported for the reactivity of each DGA with the solvated electron (e solv − ) and the corresponding dodecane radical cation (RH˙ + ) over the temperature range of 10.0 to 44.1 °C. These measurements indicate that DMDODGA is the most chemically reactive with both transient radicals, which may be attributed to this molecule's more accessible backbone. Complementary gamma dose accumulation studies (≤ 600 kGy) under envisioned process conditions—50 mM DGA in n-dodecane solvent—afforded dose constants for the loss of DGA of d = (3.41 ± 0.07) × 10 −3 , (4.19 ± 0.09) × 10 −3 , and (4.65 ± 0.09) × 10 −3 kGy −1 for T2EHDGA, DMDODGA, and TODGA, respectively. These dose constants indicate that varying DGA architecture affords subtle differences in chemical reactivity, leading to varying rates of radiolytic degradation under envisioned actinide–lanthanide separation conditions. However, more ambitious DGA frameworks, such as modifying the backbone, branching of the aliphatic chains, and/or changing the size of the chain may be required for larger gains in radiolytic longevity while optimizing actinide–lanthanide selectivity.

Arrhenius parameters↗
DOE OSTI2020

Photoinduced charge transfer in Zn(II) and Au(III)-ligated symmetric and asymmetric bacteriochlorin dyads: A computational study

The excited-state properties and photoinduced charge-transfer (CT) kinetics in a series of symmetrical and asymmetrical Zn- and Au-ligated meso–meso-connected bacteriochlorin (BChl) complexes are studied computationally. BChl derivatives, which are excellent near-IR absorbing chromophores, are found to play a central role in bacterial photosynthetic reaction centers but are rarely used in artificial solar energy harvesting systems. The optical properties of chemically linked BChl complexes can be tuned by varying the linking group and involving different ligated metal ions. We investigate charge transfer in BChl dyads that are either directly linked or through a phenylene ring (1,4- phenylene) and which are ligating Zn or Au ions. The directly linked dyads with a nearly perpendicular arrangement of the BChl units bear markedly different properties than phenylene linked dyads. In addition, we find that the dielectric dependence of the intramolecular CT rate is very strong in neutral Zn-ligated dyads, whereas cationic Au-ligated dyads show negligible dielectric dependence of the CT rate. Rate constants of the photo induced CT process are calculated at the semiclassical Marcus level and are compared to fully quantum mechanical Fermi’s golden rule based values. The rates are calculated using a screened range separated hybrid functional that offers a consistent framework for addressing environment polarization. We study solvated systems in two solvents of a low and a high scalar dielectric constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of electronic transitions on near edge optical properties of off-stoichiometric boron carbide thin films

In the present study, soft x-ray optical properties of off-stoichiometric boron carbide thin films are investigated, and the structure and chemical composition of the film is analyzed using angle dependent x-ray reflectivity and x-ray photoelectron spectroscopy techniques. Energy dependent soft x-ray reflectivity measured at a fixed grazing angle of 1.5° is used to determine the optical constants in the boron K edge region by applying the Kramers–Kronig technique. The measured optical constants show near edge fine features corresponding to σ* and π* resonances. Furthermore, the electronic transitions corresponding to σ* resonance cause a 40%–75% increase in the delta value in the above boron K edge region. The π* transitions corresponding to off-stoichiometric nature of the boron carbide are observed in the absorption spectra near ~ 192.7 eV. Details of the measured soft x-ray optical properties of the off-stoichiometric boron carbide thin film are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantum and anharmonic effects in non-adiabatic transition state theory

Quantitative descriptions of non-adiabatic transition rates at intermediate temperatures are challenging due to the simultaneous importance of quantum and anharmonic effects. Here, in this paper, the interplay between quantum effects—for motion across or along the seam of crossing—and anharmonicity in the seam potential is considered within the weak coupling limit. The well-known expression for quantized 1-D motion across the seam (i.e., tunneling) in the linear terms approximation is derived in the thermal domain using the Lagrangian formalism, which is then applied to the case when tunneling is distributed along the seam of crossing (treating motion along the seam classically). For high-frequency quantum modes, a vibrationally adiabatic (VA) approach is developed that introduces to the non-adiabatic rate constant a factor associated with high-frequency wavefunction overlap; this approach treats the high-frequency motion along the seam quantum mechanically. To test these methodologies, the reaction N 2 O ↔ N 2 + O( 3 P) was chosen. CCSD(T)-F12b/cc-pVTZ-F12 explorations of the 3 A'- 1 A' seam of N 2 O revealed that seam anharmonicity has a strong effect on the rate constant (a factor of ~20 at 2000 K). Several quantum effects were found to be significant at intermediate/lower temperatures, including the quantum N–N vibration that was coupled with seam anharmonicity using the VA approach. Finally, a 1-D approximation to non-adiabatic instanton theory is presented to estimate the validity limit of the linear terms model at low temperatures (⁠~ 250 K for N 2 O). We recommend that the assumptions built into many statistical theories for non-adiabatic reactions—harmonic behavior, classical motion, linear terms, and weak coupling—should be verified on a case-by-case basis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probabilistic and maximum entropy modeling of chemical reaction systems: Characteristics and comparisons to mass action kinetic models

We demonstrate and characterize a first-principles approach to modeling the mass action dynamics of metabolism. Starting from a basic definition of entropy expressed as a multinomial probability density using Boltzmann probabilities with standard chemical potentials, we derive and compare the free energy dissipation and the entropy production rates. We express the relation between entropy production and the chemical master equation for modeling metabolism, which unifies chemical kinetics and chemical thermodynamics. Because prediction uncertainty with respect to parameter variability is frequently a concern with mass action models utilizing rate constants, we compare and contrast the maximum entropy model, which has its own set of rate parameters, to a population of standard mass action models in which the rate constants are randomly chosen. We show that a maximum entropy model is characterized by a high probability of free energy dissipation rate and likewise entropy production rate, relative to other models. We then characterize the variability of the maximum entropy model predictions with respect to uncertainties in parameters (standard free energies of formation) and with respect to ionic strengths typically found in a cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Acoustoelastic characterization of plates using zero group velocity Lamb modes

Acoustoelasticity, a characteristic of material anharmonicity, gives rise to a link between wave propagation velocity and the stress state in materials. Ultrasonic techniques to monitor this coupling, particularly with high sensitivity and in a noncontact manner, can have widespread application both in the quantification of applied and residual stress and in the characterization of nonlinear material behavior through measurement of higher order elastic constants. Here, we use a laser ultrasonic technique to excite and detect zero group velocity (ZGV) Lamb wave resonances in aluminum plates under uniaxial loading. A laser line source is used to excite these resonances at different orientations with respect to the applied load, and the signals are detected using an interferometer. The effects of stress and source orientation on ZGV resonance frequencies are validated using the theory of acoustoelastic Lamb wave propagation. In addition, a model-based inversion technique is used to extract Murnaghan's third-order elastic constants from measurements of the stress dependence of the first two ZGV modes generated parallel and perpendicular to the applied load. Laser generation and detection of ZGV resonances is shown to be an effective and powerful approach for the noncontact and nondestructive acoustoelastic characterization of elastic waveguides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Non-equilibrium rate theory for polariton relaxation dynamics

We derive an analytic expression of the non-equilibrium Fermi’s golden rule (NE-FGR) expression for a Holstein–Tavis–Cumming Hamiltonian, a universal model for many molecules collectively coupled to the optical cavity. These NE-FGR expressions capture the full-time-dependent behavior of the rate constant for transitions from polariton states to dark states. The rate is shown to be reduced to the well-known frequency domain-based equilibrium Fermi’s golden rule (E-FGR) expression in the equilibrium and collective limit and is shown to retain the same scaling with the number of sites in non-equilibrium and non-collective cases. We use these NE-FGR to perform population dynamics with a time-non-local and time-local quantum master equation and obtain accurate population dynamics from the initially occupied upper or lower polariton states. Furthermore, NE-FGR significantly improves the accuracy of the population dynamics when starting from the lower polariton compared to the E-FGR theory, highlighting the importance of the non-Markovian behavior and the short-time transient behavior in the transition rate constant.

Chemical dynamics↗
DOE OSTI2020

Electromagnetic waves in an optical photonic lattice

Laser light propagation in a photonic lattice consisting of two parallel waveguide arrays is theoretically studied using the coupled mode method, with the interaction of each waveguide with the nearest neighbours and between the waveguides of the arrays being taken into account. Analytical expressions are obtained that make it possible to accurately predict the presence of localisation of light depending on the coupling constants. Particular solutions of a system of coupled waves are found, which describe strongly localised light propagating without transverse diffraction along the entire lattice at certain values of the coupling constants. The emergence of spatially limited transverse diffraction of light is predicted. (integral optics)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Comparative Evaluation of Spectral Methods for Robust Reactor Noise Estimation

Reactor noise analysis provides a noninvasive means to determine neutron kinetic parameters from stochastic fluctuations in detector signals. However, standard cross-power spectral density (CPSD) analyses can be sensitive to numerical processing choices, which may introduce processing-dependent systematic shifts in estimates of the prompt neutron decay constant (α) and limit reproducibility. This study uses a hybrid multitaper–Welch spectral estimator to analyze subcritical noise measurements from a fast-spectrum critical assembly. The decay constant α was extracted using three frequency-domain methods: the CPSD, the magnitude-squared coherence (MSC), and the generalized magnitude-squared coherence (GMSC). These coherence-based estimators normalize detector auto-spectral structure and are expected to reduce the sensitivity of fitted α values to processing parameters. A Sobol global sensitivity analysis identified which numerical inputs most strongly influence the fitted values of α. All estimators produced a linear dependence of α on inverse count rate, with delayed-critical extrapolations near 1.7 × 10 4 s −1 , in agreement within 8% of MCNP6.3 KOPTS benchmark calculations. Sensitivity results show that while the CPSD depends on both time-bin width and taper selection, the MSC and GMSC are dominated by time-bin width alone, indicating reduced parameter coupling and greater robustness to processing variability. These findings demonstrate the feasibility and practical value of coherence-based spectral estimators for extracting α from reactor noise and support their broader application to multi-detector and irregular datasets in subcritical system characterization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

High Compression in Palladium Alloy Metal Foil Pumps

Metal foil pumps (MFPs) are key components in the direct internal recycling inner fuel cycle loop for the recovery of hydrogen isotopes from deuterium-tritium fusion exhaust. Operating under vacuum conditions, they utilize superthermal hydrogen as the feed gas in a process called superpermeation. A notable feature of MFPs is their ability to pump against a pressure gradient. This study examines the compression capabilities of PdAg and PdCu MFPs at low temperatures with a constant feed pressure of 10 Pa. At 75°C, compression ratios exceeding 200 were readily achieved, with downstream pressures exceeding 4500 Pa using PdCu. For both alloys, net fluxes decreased by only ~15% at downstream pressures of 1000 Pa, which offers potential simplifications for the downstream pump train. Performance declined markedly when the temperature was elevated to 200°C. Pump curves were constructed and advocated as the most appropriate manner to assess MFP performance. Separate pressure-driven-permeation experiments at relevant conditions were conducted, providing a direct measurement of the hydrogen dissociation constant $k$ d , which was found to be in good agreement with the previous literature. Further, these measurements were used to predict pump curves and maximum compression ratios by balancing superpermeation with pressure-driven permeation, achieving excellent agreement with experiment. Last, experiments using asymmetric MFPs revealed the detrimental impact that surface impurities have on performance in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Addendum: A note on spin two fields in curved backgrounds (2007 Class. Quantum Grav. 24 1683)

Abstract Some time ago, we showed that a weak (linear) massless spin two wave could only propagate on a Ricci-flat or Ricci-constant background: it must necessarily be a perturbation of general relativity. This was just the continuation of the higher spin chain: massless s = 3/2 also required Ricci-flatness (which is the basis of supergravity) while s > 2 needs Riemann flatness. This note, entitled ‘higher spin m ≠ 0 excitations on curved backgrounds and cosmological supergravity’, re-analyzes the problem in a perhaps more physical way: by considering massless and—only apparently—massive small excitations and showing how their parameters relate to the cosmological constant. We will thus prove, in a simple physical way, the necessity, as well as the sufficiency, of the known supergravity results.

79 ASTRONOMY AND ASTROPHYSICS↗