Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIRCULAR PLATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Friction Stir Welded Aluminum-Lithium (Al-Li) 2050 Blanks for Spin Forming

Spin forming is a metalworking process used to produce axially-symmetric parts by the application of lateral pressure from a forming tool to a circular blank mounted on a revolving, heated mandrel. This process enables production of cones, domes, or caps that can incorporate features such as flat bulkheads. Friction stir welded (FSW) Al-Li 2195 blanks have been spin formed for single-piece, launch vehicle domes up to 5 m in diameter. Al-Li 2050 plate has the advantage of availability up to 165 mm thick,whereas 2195 plate is traditionally only available up to 57 mm thick. Increased plate thickness enables greater design flexibility for machining of taller structural elements, such as stiffeners. However, 2050 is only available in plate widths up to ~3.9 m. This study demonstrated the capability of making custom 2050 blanks for spin forming large (>7.8 m in diameter), single-piece, light-weight flight articles (e.g., lunar habitats and landers) by FSW two (or more) plates together. Spin forming of welded 2050 blanks has not been attempted before this investigation. The objective was to evaluate the mechanical properties of 2050 parent material and FSW regions after spin forming and subsequent T6 heat treatment. A 3 m diameter x 38 mm thick 2050 blank was fabricated from two 1.5 m wide pieces by FSW and subsequently spin formed into a cone article. Additionally, three 1.2 m diameter x 8.1 mm thick 2050 blanks were produced by FSW and spin formed into subscale cone articles with varying strain input. Mechanical properties are reported for spin formed 2050-T6 parent material and FSW regions on the articles. Abnormal grain growth (AGG) in the FSW during heat treatment was expected based on prior experience with 2195. Implementation of an AGG suppression strategy during heat treatment reduced AGG in the FSW regions and improved ductility.

Spin forming↗

Transmission line design for a power distribution system at 20 kHz for aircraft

A low inductance, low characteristic impedance transmission line was designed for a 20 kHz power distribution system. Several different conductor configurations were considered: strip lines, interdigitated metal ribbons, and standard insulated wires in multiwire configurations (circular and rectangular cylindrical arrangements). The final design was a rectangular arrangement of multiple wires of the same gauge with alternating polarities from wire to wire. This offered the lowest inductance per unit length (on the order of several nanohenries/meter) and the lowest characteristic impedance (on the order of one Ohm). Standard multipin connectors with gold-plated elements were recommended with this transmission line, the junction boxes to be internally connected with flat metal ribbons for low inductance, and the line to be constructed in sections of suitable length. Computer programs for the calculation of inductance of multiwire lines and of capacitances of strip lines were developed.

Zelby, L. W.↗

Optimal control of distributed parameter elastic systems

This paper presents an analytical solution to the Riccati equation for self-adjoint systems such as beams, plates, strings and membranes moving in space, and shows how the optimal control law can be implemented using the given solution. It is then shown that there always exists a self-adjoint operator describing the distribution of potential energy if the state space is appropriately augmented. A beam-like gravity-stabilized satellite moving in a circular orbit around the earth is used to illustrate the main results in this paper.

Juang, J.-N.↗

The Role of Chemically Depleted Mantle in the Formation of Coronae on Venus

Without extensive plate subduction to act as a recycling mechanism, a thick layer of buoyant, depleted mantle material may accumulate beneath the thermal lithosphere on Venus due to the pressure-release melting that occurs during crustal formation. Such a layer could be the key factor that allows coronae to form on Venus but not on Earth. Coronae are roughly circular volcano-tectonic features that are interpreted as a manifestation of small-scale upwelling and are unique to Venus. The topographic expression of coronae is highly variable, ranging from domes to plateaus, with or without moats or single or multiple outer rises. In addition to why coronae from on Venus but not on Earth, two outstanding questions in the study of coronae are how the full range of topographic profiles are produced and the relationship between topography and the annulus of fractures that characterize coronae.

Coronae↗

A versatile X-ray phase retarder for lock-in XMCD measurements

X-ray magnetic circular dichroism (XMCD) is a technique commonly used to probe magnetic properties of materials with element and orbital selectivity, which requires the use of circularly polarized (CP) X-rays. It is possible to accomplish XMCD experiments with fixed CP and alternating the magnetic field orientation, but most reliable data are obtained when alternating the magnetization orientation and the polarization between right and left helicities. A versatile strategy has been developed to perform XMCD experiments using a hard X-ray quarter-wave plate, at both polychromatic dispersive and conventional monochromatic optics, in combination with synchronous data acquisition. The switching frequency waveform is fed into a lock-in amplifier to detect and amplify the XMCD signal. The results on a reference sample demonstrate an improvement in data quality and acquisition time. The instrumentation successfully generated 98% of CP X-rays switching the beam helicity at 13 Hz, with the possibility of faster helicity switching once it is installed at the new Brazilian fourth-generation source, SIRIUS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of multifastener composite joints

A new numerical procedure for determining load proportioning in multiple-hole mechanical joints in composite plates is presented. The joints are loaded in double lap fashion in tension with pins through the holes. The commercial finite-element program ABAQUS is used to predict the load proportioning among holes using two independent plane stress finite-element models, one representing the composite inner lap and one representing the two steel outer laps, interacting through rigid circular surfaces. The circular surfaces effectively represent rigid pins. Load proportioning is predicted for a number of geometries. Excellent correlation with experimental data is obtained. Experimental and computed surface strains are also found to compare well. The assumption of a radial cosine distribution of contact stress between pin and hole is shown to be substantially in error for some holes.

Griffin, O. H., Jr.↗

Crustal dynamics project data analysis fixed station VLBI geodetic results

The Goddard VLBI group reports the results of analyzing the fixed observatory VLBI data available to the Crustal Dynamics Project through the end of 1984. All POLARIS/IRIS full-day data are included. The mobile site at Platteville, Colorado is also included since its occupation bears on the study of plate stability. Data from 1980 through 1984 were used to obtain the catalog of site and radio source positions labeled S284C. Using this catalog two types of one-day solutions were made: (1) to estimate site and baseline motions; and (2) to estimate Earth rotation parameters. A priori Earth rotation parameters were interpolated to the epoch of each observation from BIH Circular D.

Ryan, J. W.↗

Where's the Beaverhead beef?

Only rare quartz grains with single-set planar (1013) deformation features (PDF's) are present in breccia dikes found in association with uniformly oriented shatter cones that occur over an area 8 x 25 km. This suggests that the Beaverhead shocked rocks come from only the outer part of the central uplift of what must have been a large (greater than 100 km diameter) complex impact structure. An impact event of this magnitude on continental crust (thought to have occurred in late Precambrian or ealy Paleozoic time) could be expected to punctuate local geologic history. Furthermore, although it may now be covered, its scar should remain despite all the considerable subsequent erosion/deposition and tectonism since the impact. The following are three large-scale singularities or anomalies that may reflect the event and mark its source. (1) The Lemhi Arch is a major structural uplift that occurred in late Proterozoic-early Paleozoic time in East Central Idaho and caused the erosion of at least 4 km of sedimentary cover. This may be directly related to the impact. (2) Of the many thrust sheets comprising the Cordilleran belt, the Cabin plate that carries the shocked rocks is unique in that it alone intersected the crystalline basement. It also now marks the apex of the Southwest Montana Recess in the Sevier front. The basement uplift remaining from the impact may have constituted a mechanical obstacle to the advancing thrust sheets in Cretaceous time, causing the recess. (3) What could be interpreted as a roughly circular aeromagnetic anomaly approx. 70 km in diameter can be discerned in the state aeromagnetic map centered about 20 km southeast of Challis, Idaho, in the Lost River range. It is in approximately the right place, and ignoring the possibility that the anomalies have diverse causes and the circular pattern is coincidental, it may mark what remains of the buried central uplift structure.

Hargraves, R. B.↗

High-resolution imaging with a two-dimensional resistive anode photon counter

A method to achieve high spatial resolution readout of individual photoelectron events using microchannel plates and a resistive anode is presented. A clamped pair of microchannel plates is used, followed by a gap and a clamped triplet of microchannel plates in cascade to achieve a high stable electron gain of 3 x 10 to the 7th. The gain allows the position determination of each photoelectron event with a very high signal-to-noise ratio. A model consisting of a windowless vacuum-ultraviolet image sensor is presented to demonstrate 500 x 500 pixel images of 50 micron FWHM over a 25-mm circular field of view. The detector offers sufficient speed, sensitivity and resolution for a variety of applications, and the mount design is compatible with planar, remotely-processed, proximity-focused photocathodes.

Firmani, C.↗

Optimum satellite orbits for accurate measurement of the earth's radiation budget, summary

The optimum set of orbit inclinations for the measurement of the earth radiation budget from spacially integrating sensor systems was estimated for two and three satellite systems. The best set of the two were satellites at orbit inclinations of 80 deg and 50 deg; of three the inclinations were 80 deg, 60 deg and 50 deg. These were chosen on the basis of a simulation of flat plate and spherical detectors flying over a daily varying earth radiation field as measured by the Nimbus 3 medium resolution scanners. A diurnal oscillation was also included in the emitted flux and albedo to give a source field as realistic as possible. Twenty three satellites with different inclinations and equator crossings were simulated, allowing the results of thousand of multisatellite sets to be intercompared. All were circular orbits of radius 7178 kilometers.

Campbell, G. G.↗

A novel planar ion funnel design for miniature ion optics

The novel planar ion funnel (PIF) design presented in this article emphasizes simple fabrication, assembly, and operation, making it amenable to extreme miniaturization. Simulations performed in SIMION 8.0 indicate that ion focusing can be achieved by using a gradient of electrostatic potentials on concentric metal rings in a plane. A prototype was fabricated on a 35 × 35 mm custom-designed printed circuit board (PCB) with a center hole for ions to pass through and a series of concentric circular metal rings of increasing diameter on the front side of the PCB. Metal vias on the PCB electrically connected each metal ring to a resistive potential divider that was soldered on the back of the PCB. The PIF was tested at 5.5 × 10⁻⁶ Torr in a vacuum test setup that was equipped with a broad-beam ion source on the front and a micro channel plate (MCP) ion detector on the back of the PIF. The ion current recorded on the MCP anode during testing indicated a 23× increase in the ion transmission through the PIF when electric potentials were applied to the rings. These preliminary results demonstrate the functionality of a 2D ion funnel design with a much smaller footprint and simpler driving electronics than conventional 3D ion funnels. Future directions to improve the design and a possible micromachining approach to fabrication are discussed in the conclusions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of the dosimetric properties of a synthetic single crystal diamond detector in high energy clinical proton beams

Purpose: To investigate the dosimetric properties of a synthetic single crystal diamond Schottky diode for accurate relative dose measurements in large and small field high-energy clinical proton beams.Methods: The dosimetric properties of a synthetic single crystal diamond detector were assessed by comparison with a reference Markus parallel plate ionization chamber, an Exradin A16 microionization chamber, and Exradin T1a ion chamber. The diamond detector was operated at zero bias voltage at all times. Comparative dose distribution measurements were performed by means of Fractional depth dose curves and lateral beam profiles in clinical proton beams of energies 155 and 250 MeV for a 14 cm square cerrobend aperture and 126 MeV for 3, 2, and 1 cm diameter circular brass collimators. ICRU Report No. 78 recommended beam parameters were used to compare fractional depth dose curves and beam profiles obtained using the diamond detector and the reference ionization chamber. Warm-up/stability of the detector response and linearity with dose were evaluated in a 250 MeV proton beam and dose rate dependence was evaluated in a 126 MeV proton beam. Stem effect and the azimuthal angle dependence of the diode response were also evaluated.Results: A maximum deviation in diamond detector signal from the average reading of less than 0.5% was found during the warm-up irradiation procedure. The detector response showed a good linear behavior as a function of dose with observed deviations below 0.5% over a dose range from 50 to 500 cGy. The detector response was dose rate independent, with deviations below 0.5% in the investigated dose rates ranging from 85 to 300 cGy/min. Stem effect and azimuthal angle dependence of the diode signal were within 0.5%. Fractional depth dose curves and lateral beam profiles obtained with the diamond detector were in good agreement with those measured using reference dosimeters.Conclusions: The observed dosimetric properties of the synthetic single crystal diamond detector indicate that its behavior is proton energy independent and dose rate independent in the investigated energy and dose rate range and it is suitable for accurate relative dosimetric measurements in large as well as in small field high energy clinical proton beams.

61 RADIATION PROTECTION AND DOSIMETRY↗

Stress concentration in a cylindrical shell containing a circular hole.

The state of stress in a cylindrical shell containing a circular cutout was determined for axial tension, torsion, and internal pressure loading. The solution was obtained for the shallow shell equations by a variational method. The results were expressed in terms of a nondimensional curvature parameter which was a function of shell radius, shell thickness, and hole radius. The function chosen for the solution was such that when the radius of the cylindrical shell approaches infinity, the flat-plate solution was obtained. The results are compared with solutions obtained by more rigorous analytical methods, and with some experimental results. For small values of the curvature parameter, the agreement is good. For higher values of the curvature parameter, the present solutions indicate a limiting value of stress concentration, which is in contrast to previous results.

Adams, N. J. I.↗

Radar transponder antenna pattern analysis for the space shuttle

In order to improve tracking capability, radar transponder antennas will soon be mounted on the Shuttle solid rocket boosters (SRB). These four antennas, each being identical cavity-backed helices operating at 5.765 GHz, will be mounted near the top of the SRB's, adjacent to the intertank portion of the external tank. The purpose is to calculate the roll-plane pattern (the plane perpendicular to the SRB axes and containing the antennas) in the presence of this complex electromagnetic environment. The large electrical size of this problem mandates an optical (asymptotic) approach. Development of a specific code for this application is beyond the scope of a summer fellowship; thus a general purpose code, the Numerical Electromagnetics Code - Basic Scattering Code, was chosen as the computational tool. This code is based on the modern Geometrical Theory of Diffraction, and allows computation of scattering of bodies composed of canonical problems such as plates and elliptic cylinders. Apertures mounted on a curved surface (the SRB) cannot be accomplished by the code, so an antenna model consisting of wires excited by a method of moments current input was devised that approximated the actual performance of the antennas. The improvised antenna model matched well with measurements taken at the MSFC range. The SRB's, the external tank, and the shuttle nose were modeled as circular cylinders, and the code was able to produce what is thought to be a reasonable roll-plane pattern.

Radcliff, Roger↗

An Experimental Study of Incremental Surface Loading of an Elastic Plate: Application to Volcano Tectonics

Models of surface fractures due to volcanic loading an elastic plate are commonly used to constrain thickness of planetary lithospheres, but discrepancies exist in predictions of the style of initial failure and in the nature of subsequent fracture evolution. In this study, we perform an experiment to determine the mode of initial failure due to the incremental addition of a conical load to the surface of an elastic plate and compare the location of initial failure with that predicted by elastic theory. In all experiments, the mode of initial failure was tension cracking at the surface of the plate, with cracks oriented circumferential to the load. The cracks nucleated at a distance from load center that corresponds the maximum radial stress predicted by analytical solutions, so a tensile failure criterion is appropriate for predictions of initial failure. With continued loading of the plate, migration of tensional cracks was observed. In the same azimuthal direction as the initial crack, subsequent cracks formed at a smaller radial distance than the initial crack. When forming in a different azimuthal direction, the subsequent cracks formed at a distance greater than the radial distance of the initial crack. The observed fracture pattern may explain the distribution of extensional structures in annular bands around many large scale, circular volcanic features.

Williams, K. K.↗

Validating Ancient Age of the Buried Floor of the Northern Lowlands, Mars

Hesperian and Amazonian plains units cover the northern lowlands but little is known about what this surface covers. Models for the creation of the lowlands and the dichotomy boundary implement mechanisms which vary from internal processes, such as plate tectonics or first-order mantle convection, to external processes, such as a single large impact or multiple impacts. Different models require different time scales for low-land formation; determining the age of the buried low-land surface would help constrain the formation models. The Mars Orbiting Laser Altimeter (MOLA) has yielded a high-precision, topographic gridded data set that reveals the presence of Quasi-Circular Depressions (QCDs) in both the southern highlands and the northern lowlands. Most of these roughly circular depressions have no corresponding visible structural feature on the surface. It is proposed that these QCDs are the surface representation of buried impact craters. Based on this assumption, cumulative number vs. diameter curves were constructed, which placed the age of the buried surface of the northern lowlands in the Early or pre-Noachian. A Noachian basement is supported by the remnants of large craters and multi-ring basins discovered in earlier research, but the QCDs provide the first evidence of this for the entire lowland. Constraining the age of the basement floor to the earliest Noachian, however, would require that the process that formed the northern lowlands either occurred in the early Noachian or involves removal of material from the bottom of the crust without destroying the previously formed craters to achieve the modeled crustal thinning. But can we establish that the QCDs do in fact represent buried impact craters, and thus validate an Early Noachian age for the buried lowland floor?

Buczkowski, D. L.↗

DASCH DISCOVERY OF A POSSIBLE NOVA-LIKE OUTBURST IN A PECULIAR SYMBIOTIC BINARY

We present photometric and spectroscopic observations of a peculiar variable (designated DASCH J075731.1+201735 or J0757) discovered from our DASCH project using the digitized Harvard College Observatory archival photographic plates. It brightened by about 1.5 mag in B within a year starting in 1942, and then slowly faded back to its pre-outburst brightness from 1943 to 1950s. The mean brightness level was stable before and after the outburst, and ellipsoidal variations with a period of P = 119.18 {+-} 0.07 days are seen, suggesting that the star is tidally distorted. Radial-velocity measurements indicate that the orbit is nearly circular (e = 0.02 {+-} 0.01) with a spectroscopic period that is the same as the photometric period. The binary consists of a 1.1 {+-} 0.3 M{sub Sun} M0III star, and a 0.6 {+-} 0.2 M{sub Sun} companion, very likely a white dwarf (WD). Unlike other symbiotic binaries, there is no sign of emission lines or a stellar wind in the spectra. With an outburst timescale of {approx}10 years and estimated B-band peak luminosity M{sub B} {approx} 0.7, J0757 is different from any other known classic or symbiotic novae. The most probable explanation of the outburst is hydrogen shell burning on the WD, although an accretion-powered flare cannot be ruled out.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of the flow between a pair of circular cylinders in the flopping regime

The wakes of a pair of circular cylinders are grossly unsteady when the cylinders are separated in a direction normal to the approaching flow by less than one cylinder diameter. The wakes flop randomly between two asymmetric states. The time-scale for the flopping is several orders of magnitude longer than the timescale of vortex shedding, and also several orders of magnitude longer than the timescale for instability of the separating shear layers. When a splitter plate is positioned suitably on the centerline of the cylinders, the flopping can be stopped and the flow made to assume either of the asymmetric states, or a symmetric steady state. For a range of plate positions a new, periodic oscillation occurs. Acoustic excitation can also destroy the flopping mean flow, replacing it by a symmetric flow.

Kim, H. J.↗