Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CARBONYLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Mesoporous Co 3 O 4 catalysts for VOC elimination: Oxidation of 2-propanol

Mesoporous cobalt oxides were prepared by an inverse micelle method and calcined at different temperatures. These materials exhibited superior activity for oxidation of 2-propanol as the model substrate for VOC elimination. Highest active Co 3 O 4 -350 material showed a maximum turnover frequency of 25.8 h -1 at 160 °C at a weight hourly space velocity of 60 L g -1 h -1 . The apparent activation energies of mesoporous cobalt oxides ranged from 69.7 kJ/mol to 115.6 kJ/mol. In situ Diffuse Reflectance Infrared spectroscopy (DRIFTS) revealed that the reaction involves formation of carbonyl and carbonate species on the surface of the catalyst before complete oxidation to CO 2 and H 2 O. The activities of the materials were correlated to better low temperature reducibility, large pore volumes, higher Co 3+ / Co 2+ ratios, and higher number of surface-active oxygen species.

2-propanol↗
DOE OSTI2022

Reverse water-gas shift: Na doping of m-ZrO 2 supported Pt for selectivity control

Reverse water-gas shift (RWGS) is a vital step in producing syngas for the chemical conversion of CO 2 to liquid transportation fuels and chemicals. Na-doping of m-ZrO 2 supported Pt catalysts allowed selectivity control by systematically increasing the ratio of relative rates of r CO /r CH4 . This was achieved by facilitating the formation of formate intermediate species, which precedes CO formation, and by suppressing the metallic Pt 0 active sites responsible for CH 4 formation. Here, a 2.5%Na-2%Pt/m-ZrO 2 catalyst was first tested for the forward water-gas shift (FWGS) reaction and found to have 50% higher CO conversion at 285°C compared to the undoped catalyst. Results of DRIFTS spectroscopy of adsorbed CO confirmed a formate ν(CH) band shift to lower wavenumbers (2870–2802 cm —1 ) with the addition of Na and more rapid forward formate decomposition in steam to H 2 and carbonate species, the precursor to CO 2 . This is consistent with C-H bond breaking being the rate limiting step of a FWGS mechanism occurring at the metal-support junction. Consistent with this, DRIFTS of RWGS in 4%CO 2 + 60%H 2 showed more facile formation of formate for the Na-doped catalyst and, once again, the ν(CH) band was shifted to lower wavenumbers (2874–2803 cm —1 ) with Na-doping. In addition, Na doping resulted in a systematic decrease in the Pt-carbonyl band in DRIFTS of adsorbed CO as well as DRIFTS of in-situ RWGS reaction tests, suggesting that Na blocked a fraction of on-top Pt sites, breaking up ensembles of Pt 0 responsible for methanation. The selectivity of the 2.5%Na-doped catalyst, unlike its undoped counterpart, was remarkably resistant to methanation (e.g., selectivity < 0.2% CH 4 with pressures of up to 20 bar).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Hydrodeoxygenation of phenol over zirconia supported Pd bimetallic catalysts. The effect of second metal on catalyst performance

Here, this work investigated the effect of the addition of a second metal (Cu, Ag, Zn, Sn) on the performance of Pd/ZrO 2 catalyst for HDO of phenol at 573 K in the gas phase. The incorporation of dopants resulted in the formation of Pd–X (Cu, Ag, Zn) alloys, which reduced the reaction rate for HDO and increased the selectivity to hydrogenation products (cyclohexanone and cyclohexanol). The lower activity of the bimetallic catalysts was due to the segregation of the second metal on the surface of the Pd particle. For PdSn/ZrO 2 , alloying was also observed but tin oxide was still present on the surface after reduction at 773 K. For Pd and PdSn/ZrO 2 , the oxophilic sites represented by Zr and Sn cations promotes the hydrogenation of the carbonyl group of the keto-tautomer intermediate formed, producing benzene as the main product. All catalysts significantly deactivated during the reaction but the deactivation degree depended on the type of the metal. Pd/ZrO 2 and PdZn/ZrO 2 and PdAg/ZrO 2 exhibited approximately the same deactivation degree. However, the loss of activity was less pronounced for PdSn/ZrO2 catalyst. Finally, Pd dispersion significantly decreased during the reaction, indicating that the sintering of Pd particles is one of the causes for catalyst deactivation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The effect of CO on CO2 methanation over Ru/Al2O3 catalysts: a combined steady-state reactivity and transient DRIFT spectroscopy study

The reactivity of Ru/Al2O3 catalysts in the hydrogenation of CO/CO2 gas mixtures is investigated in this work. Accordingly kinetic measurements are carried out at process conditions of industrial interest (i.e., at high COx per-pass conversion and with concentrated COx/H2 streams), and the surface species on the catalyst are investigated through transient DRIFTS-MS analysis. The catalyst shows gradual deactivation when the methanation is carried out in the presence of CO in the gas feed at low temperatures (200-300 °C). However, stable performance is observed at higher temperatures, showing CH4 yields even higher than those observed during methanation of a pure CO2 feed. The catalyst deactivation at low temperature is reversible as thermal treatments at temperatures above 350 °C are able to restore the catalytic activity. DRIFTS-MS experiments revealed that CO2 methanation involves a reaction pathway where CO2 is adsorbed as bicarbonate on Al2O3 and successively hydrogenated to methane on Ru, passing through formate and carbonyl intermediates. In the presence of CO at low temperatures, the catalyst shows a higher CO coverage of the Ru sites, a larger formate coverage of alumina sites and the presence of adsorbed carbonaceous species, identified as hydrocarbon and carboxylate species. Carboxylates remain on the surface, effectively blocking adsorption sites thus leading to catalyst deactivation. However, working above the carboxylate decomposition temperature ensures a clean catalyst surface, resulting in stable and high performance in CO/CO2 methanation. Catalyst preparation, characterization and testing activity were carried out with a joint project between the Politecnico di Milano and the Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), which is gratefully acknowledged. The authors gratefully acknowledge the financial support of the DRIFTS experiments by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division. L.F. also acknowledges the Pacific Northwest National Laboratory (PNNL) for the financial support during his permanence as visiting student.

Methanation, Power-to-gas, Ru/Al2O3 catalyst, cata↗
DOE OSTI2013

Molecular Characterization of Organic Aerosol Using Nanospray Desorption/Electrospray Ionization Mass Spectrometry: CalNex 2010 field study

Aerosol samples from the CalNex 2010 field study were analyzed using high resolution mass spectrometry (HR-MS) coupled to a nanospray-desorption/electrospray ionization (nano-DESI) source. The samples were collected in Bakersfield, CA on June 22-23, 2010. The chemical formulas of over 1300 unique molecular species were detected in the mass range of 50-800 m/z. Our analysis focused on identification of two main groups: compounds containing only carbon, hydrogen, and oxygen (CHO only), and nitrogen-containing organic compounds (NOC). The NOC accounted for 35% (by number) of the compounds observed in the afternoon, and for 59% in the early morning samples. By comparing plausible reactant-product pairs, we propose that over 50% of the NOC in each sample could have been formed through reactions transforming carbonyls into imines. The CHO only compounds were dominant in the afternoon suggesting a photochemical source. The average O:C ratios of all observed compounds were fairly consistent throughout the day, ranging from 0.34 in the early morning to 0.37 at night. We conclude that both photooxidation and ammonia chemistry play important roles in forming the compounds observed in this mixed urban-rural environment.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Evolution of archaeal Rib7 and eubacterial RibG reductases in riboflavin biosynthesis: Substrate specificity and cofactor preference

Highlights: • The first archaeal dimeric structures of Methanosarcina mazei Rib7 are reported. • Our studies show the divergences between archaeal and eubacterial Rib7 reductases. • Asp33 together with Arg36, had been evolved to ensure the substrate specificity. • Unexpectedly, an endogenous NADPH cofactor is observed in M. mazei Rib7. • The endogenous NADPH greatly enhances the structural stability of archaeal Rib7. Archaeal/fungal Rib7 and eubacterial RibG possess a reductase domain for ribosyl reduction in the second and third steps, respectively, of riboflavin biosynthesis. These enzymes are specific for an amino and a carbonyl group of the pyrimidine ring, respectively. Here, several crystal structures of Methanosarcina mazei Rib7 are reported at 2.27–1.95 Å resolution, which are the first archaeal dimeric Rib7 structures. Mutational analysis displayed that no detectable activity was observed for the Bacillus subtilis RibG K151A, K151D, and K151E mutants, and the M. mazei Rib7 D33N, D33K, and E156Q variants, while 0.1–0.6% of the activity was detected for the M. mazei Rib7 N9A, S29A, D33A, and D57N variants. Our results suggest that Lys151 in B. subtilis RibG, while Asp33 together with Arg36 in M. mazei Rib7, ensure the specific substrate recognition. Unexpectedly, an endogenous NADPH cofactor is observed in M. mazei Rib7, in which the 2′-phosphate group interacts with Ser88, and Arg91. Replacement of Ser88 with glutamate eliminates the endogenous NADPH binding and switches preference to NADH. The lower melting temperature of ∼10 °C for the S88E and R91A mutants suggests that nature had evolved a tightly bound NADPH to greatly enhance the structural stability of archaeal Rib7.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Further characterization of the Maillard deglycase DJ-1 and its prokaryotic homologs, deglycase 1/Hsp31, deglycase 2/YhbO, and deglycase 3/YajL

We reported recently that the Parkinsonism-associated protein DJ-1 and its bacterial homologs Hsp31, YhbO and YajL function as deglycases that repair proteins and nucleotides from endogeneous glycation by glyoxal and methylglyoxal, two reactive by-products of glucose metabolism responsible for up to 60% of glycation damage. Here, we show that DJ-1, deglycase 1 and deglycase 2 repair glyoxal- and methylglyoxal-glycated substrates, whereas deglycase 3 principally repairs glyoxal-glycated substrates. Moreover, deglycase 1 and 2 are overexpressed in stationary phase, whereas deglycase 3 is steadily expressed throughout bacterial growth. Finally, deglycase mutants overexpress glyoxalases, aldoketoreductases, glutathione-S-transferase and efflux pumps to alleviate carbonyl stress. In the discussion, we present an overview of the multiple functions of DJ-1 proteins. Our thourough work on deglycases provides compelling evidence that their previously reported glyoxalase III activity merely reflects their deglycase activity. Moreover, for their deglycase activity the Maillard deglycases likely recruit: i) their chaperone activity to interact with glycated proteins, ii) glyoxalase 1 activity to catalyze the rearrangement of Maillard products (aminocarbinols and hemithioacetals) into amides and thioesters, respectively, iii) their protease activity to cleave amide bonds of glycated arginine, lysine and guanine, and iv) glyoxalase 2 activity to cleave thioester bonds of glycated cysteine. Finally, because glycation affects many cellular processes, the discovery of the Maillard deglycases, awaited since 1912, likely constitutes a major advance for medical research, including ageing, cancer, atherosclerosis, neurodegenerative, post-diabetic, renal and autoimmune diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

SmpB down-regulates proton-motive force for the persister tolerance to aminoglycosides in Aeromonas veronii

Highlights: • The smpB deletion exhibited a higher susceptibility to aminoglycosides in A. veronii. • The expression level of SmpB was enhanced by gentamicin challenge. • The effect of SmpB on persistence formation was eliminated by PMF inhibition. • The smpB deletion downregulated proton-motive force-related metabolic genes. Bacterial persisters comprise a small fraction of phenotypically heterogeneous variants with transient capability for survival when exposed to high concentrations of antibiotic. In aquatic pathogenic bacteria Aeromonas veronii, Small Protein B (SmpB), the core factor of trans-translation system, was identified as a new persistence-related gene. The SmpB deletion exhibited a higher susceptibility and lower persister cell formation under aminoglycosides antibiotics pressure compared with wild type. The transcriptional and translational activities of smpB gene were significantly enhanced by the gentamicin challenge in exponential phase, but not changed in stationary phase. The transcriptomic analysis revealed that the smpB deletion stimulated the production of proton-motive force (PMF). The cell survival induced by carbonyl cyanide m-chlorophenyl hydrazone (CCCP) further verified that SmpB variation affected the quantities of PMF. Taken together, these results uncovered a novel mechanism of persister formation mediated by SmpB under aminoglycosides treatments.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Feedstock and Catalyst Impact on Bio-Oil Production and FCC Co-Processing to Fuels

NREL's thermochemical biomass conversion research is focused on ex-situ upgrading of biomass fast-pyrolysis (FP) vapors as an efficient route to completely biogenic pyrolysis-based fuel precursors, fuels, and value-added chemicals depending on catalyst and process conditions. A near term pathway being developed uses these liquids for co-processing with petroleum feedstocks to assess biogenic carbon incorporation in hydrocarbon fuel feedstocks for potential refinery use. In this work, the impact of feedstock and catalyst on catalytic fast pyrolysis oil (CFPO) composition was determined with the oils then assessed for biogenic fuel production via FCC (fluidized catalytic cracking) co-processing. Biomass vapors were generated via fast pyrolysis with destabilizing vapor components (char, inorganics, tar aerosols) removed by hot gas filtration to produce clean vapors more responsive to catalytic upgrading. A Davison Circulating Riser (DCR), a petroleum industry standard for fluidized catalytic cracking (FCC) catalyst evaluation, was coupled to a custom pyrolyzer system designed to produce consistent-composition pyrolysis vapors as feed to the DCR. Pyrolysis vapors, derived from pure hardwood and softwood, were upgraded using commercially available modified zeolite-based catalysts to produce CFPOs. These upgraded oils were analyzed via 31P and 13C NMR spectroscopy, GCxGC-TOF/MS, carbonyl and ultimate analysis (CHNO), and simulated distillation (SIMDIS) to assess both oil chemistry and distillation behavior as they relate to catalyst and feedstock type for producing fungible hydrocarbon product liquids. These exploratory vapor-phase-upgrading results demonstrated the feasibility of producing refinery-compatible hydrocarbon fuel intermediates entirely from biomass-derived fast-pyrolysis vapors using an industry-accepted DCR system for catalytic upgrading. The FCC co-processing results demonstrated the feasibility of using CFPOs with VGO feeds in FCC refinery operations to produce biogenic carbon containing fuels.

biogenic carbon↗
DOE OSTI2023

Tetrazole-based inhibitors of the bacterial enzyme N -succinyl- L,L -2,6-diaminopimelic acid desuccinylase as potential antibiotics

Based on a hit from a high-throughput screen, a series of phenyltetrazole amides was synthesized and assayed for inhibitory potency against DapE from Haemophilus influenzae (HiDapE). The inhibitory potency was modest but confirmed, with the most potent analog containing an aminothiazole moiety displaying an IC 50 = 50.2 ± 5.0 μM. Finally, docking reveals a potential binding mode wherein the amide carbonyl bridges both zinc atoms in the active site, and the tetrazole forms key hydrogen bonds with Arg330.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Modeling of Hidden Structures Using Sparse Chemical Shift Data from NMR Relaxation Dispersion

NMR relaxation dispersion measurements report on conformational changes occurring on the μs-ms timescale. Chemical shift information derived from relaxation dispersion can be used to generate structural models of weakly populated alternative conformational states. Current methods to obtain such models rely on determining the signs of chemical shift changes between the conformational states, which are difficult to obtain in many situations. Here, we use a “sample and select” method to generate relevant structural models of alternative conformations of the C-terminal-associated region of Escherichia coli dihydrofolate reductase (DHFR), using only unsigned chemical shift changes for backbone amides and carbonyls ( 1 H, 15 N, and 13 C'). We find that CS-Rosetta sampling with unsigned chemical shift changes generates a diversity of structures that are sufficient to characterize a minor conformational state of the C-terminal region of DHFR. The excited state differs from the ground state by a change in secondary structure, consistent with previous predictions from chemical shift hypersurfaces and validated by the x-ray structure of a partially humanized mutant of E. coli DHFR (N23PP/G51PEKN). The results demonstrate that the combination of fragment modeling with sparse chemical shift data can determine the structure of an alternative conformation of DHFR sampled on the μs-ms timescale. Such methods will be useful for characterizing alternative states, which can potentially be used for in silico drug screening, as well as contributing to understanding the role of minor states in biology and molecular evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Tetracyanoethylene oxide-functionalized graphene and graphite characterized by Raman and Auger spectroscopy

The tetracyanoethylene oxide (TCNEO) functionalization of chemical vapor deposition grown large area graphene and graphite was performed using reaction of TCNEO with carbon surface in chlorobenzene. The successful functionalization has been confirmed by Raman and Auger spectroscopy, and by numerical modeling of the structure and vibrational modes of TCNEO-functionalized graphene. Raman spectra of TCNEO-functionalized graphene and graphite show several groups of lines corresponding to vibrations of attached carbonyl ylide. Lastly, one of key signatures of TCNEO attachment is the high intensity Raman band at ~1450 cm ₋1 , which represents the C-C=C in plane vibrations in functionalization-distorted graphene. We find Raman spectra indicate the existence of central (pristine) attachment of TCNEO to graphene surface.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Tuning oxidation level, electrical conductance and band gap structure on graphene sheets by cyclic atomic layer reduction technique

The present work develops an atomic layer reduction (ALR) method to accurately tune oxidation level, electrical conductance, band-gap structure, and photoluminescence (PL) response of graphene oxide (GO) sheets. The ALR route is carried out at 200 °C within ALR cycle number of 10–100. The ALR treatment is capable of striping surface functionalities (e.g., hydroxyl, carbonyl, and carboxylic groups), producing thermally-reduced GO sheets. The ALR cycle number serves as a controlling factor in adjusting the crystalline, surface chemistry, electrical, optical properties of GO sheets. With increasing the ALR cycle number, ALR-GO sheets display a high crystallinity, a low oxidation level, an improved electrical conductivity, a narrow band gap, and a tunable PL response. Finally, on the basis of the results, the ALR technique offers a great potential for accurately tune electrical and optical properties of carbon materials through the cyclic removal of oxygen functionalities, without any complicated thermal and chemical desorption processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical changes from N-doped graphene and Metal-Organic Frameworks to N-G/MOF composites for improved electrocatalytic activity

Integrating N doped graphene (N G) with Metal Organic Frameworks (MOFs) enhances catalytic activity for oxygen reduction reaction (ORR), often exceeding both the performances of their precursors and, in some cases, even PGM based catalysts. However, the factors driving this improved catalytic activity in N G/MOF composites remain unexplored, particularly from the perspective of the chemical changes. To investigate the chemical changes in N G and MOF upon their integration and the implications of these changes on ORR catalytic activity, an N G/MOF was synthesized from N G with a MOF (ZIF 8) following a mechanochemical wet ball milling process. The N G, ZIF 8, and N G/MOF samples were examined for changes in elemental composition, chemical state of carbon, different nitrogen and carbon bonds, and other chemical interactions. In the N G/MOF catalyst, compared to its N G and ZIF 8 precursors, the relative oxygen content increased, indicating the formation of additional oxygen containing groups. The C 1s peak shifted to a lower binding energy in N G/MOF, suggesting changes in the overall chemical or oxidation state of the carbon atoms. Besides, the increase in pyridinic N functional groups in N G/MOF points to the formation of additional active sites. Furthermore, the formation of C Zn bonds in N G/MOF suggests the probable emergence of single atom Zn sites, while the increase in C=O bonds points to the formation of carboxyl or carbonyl groups. These chemical changes could be linked to the enhanced electrocatalytic activity of the N G/MOF composite for ORR. In conclusion, this study may also be beneficial for other research focused on developing composite catalysts involving various N G and MOF materials.

25 ENERGY STORAGE↗
DOE OSTI2018

Correlating furfural reaction pathways with interactions between furfural and monometallic surfaces

Controlling the selectivity of furfural reaction is an important step towards valorizing this important platform chemical in biomass conversion. Previous studies speculate that the selectivity of furfural reaction depends on the interactions of furan ring with metal surfaces. In this work, high resolution electron energy loss spectroscopy (HREELS) and temperature programmed desorption (TPD) are employed to directly study the correlations between furfural reaction pathways and interactions between furfural and different monometallic surfaces. Monometallic surfaces with strong ring interactions favor ring-opening products, while monometallic surfaces with weak ring interactions favor furan production. Oxophilic metal surface like Fe(110) promotes the hydrodeoxygenation pathway to produce 2-methylfuran due to strong interaction with the carbonyl group. Furthermore, these results should provide guidance in the future catalyst design for converting furfural to value-added products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices

Perovskite solar cells (PSCs) exhibited remarkable progress for small aperture area cells, however, the performance of its counterpart, large aperture area cells, lags due to non-uniform and defective perovskite layers. Here, we fabricate reproducible large area homogeneous perovskite films at room temperature and without controlling humidity (up to 40 % RH) with a slot die coater on a c-TiO 2 layer deposited using a large area chemical bath. A new artificial peptide – sulfonyl-γ-AApeptide (F-GLU-S) was employed to modify the slot-die coated perovskite surface, grain boundaries and electronic defects. The multi-functional F-GLU-S with carbonyl, carboxyl, sulfonyl, benzene, and chloro groups was capable of strongly interacting with the perovskite layer and repairing the uncoordinated Pb 2+ ions and halide vacancies. As a result, both the electron and hole densities of defects were significantly suppressed; consequently, the non-radiative recombination was effectively suppressed for the modified device which can be explicitly seen in the device performance where both V oc and FF of the modified device improved considerably. Therefore, F-GLU-S modified slot-die coated MAPbI 3 – based devices demonstrated outstanding performance of 21.44 % PCE with a V oc of 1.13 V, J sc of 24.64 cm –2 , and FF 76.99 %. Furthermore, F-GLU-S passivation impeded the infiltration of moisture and oxygen due to its hydrophobic nature and defect repair potential. As a result, the modified device retained above 92 % of its original PCE after 720 h in air (room temperature and 40–60 % RH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Optimizing the surface distribution of acid sites for cooperative catalysis in condensation reactions promoted by water

Addition of small amounts of water to the organic solvent may result in different promoting or inhibiting effects in aldol condensation reactions depending on the distribution of active sites on the surface. In a combination of liquid-phase catalytic activity measurements, spectroscopies and theoretical calculations, we have shown that water clusters around the acid site can form bridges with a ketone molecule located close to the activated carbonyl, on another site. When the distance between the two acid sites is greater than a distance corresponding to about 2 water molecules, the efficiency of the bond polarization of the ketone by a remotely located acid site decreases significantly, and the presence of water no longer promotes the reaction. Furthermore, this work provides a quantitative assessment of how solvent molecules can bridge isolated active sites to enable cooperative catalysis, which offers an additional dimension for engineering catalysis at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗