Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Beam Forming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A blessing in disguise : Characterisations of ProtoDUNE photon showers for neutrino measurements in DUNE

There are few areas of particle physics as open to new discoveries as the neutrino sector. Although these particles are among the most abundant in the universe, their weak coupling to ordinary matter makes them a challenge to study. The Deep Underground Neutrino Experiment (DUNE) is an upcoming precision experiment in neutrino physics planned to be built between Illinois and South Dakota in the US. The most powerful neutrino beam in the world will be aimed at the largest liquid argon time projection chamber in the world through 1300 km of solid rock. In order to prototype this detector, a scale model was constructed and operated at CERN in 2018 called ProtoDUNE. This thesis presents three studies performed on this detector. The first concerns the readout of detector data by the FELIX data acquisition system, as well as compression studies performed on the same data. The second study concerns the identification of photons created in neutral pion decay, which form a major background to neutrino-produced electrons. The distinction between electrons and photons is based on the differing energy deposition in the initial part of the particle showers they produce. The third study concerns the energy reconstruction of particle showers in the detector. Although photon showers created from neutral pion decay are a major background to the eventual neutrino signal, they have a known energy profile and can thus be used to calibrate the energy reconstruction of particle showers in general, a vital requirement for DUNE’s physics goals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Analysis of the EMCCD point-source response using x-rays

Electron Multiplying Charge Coupled Devices, EMCCD are used as x-ray detectors. The NSLS-II Soft Inelastic x-ray Scattering (SIX) beam line has two EMCCDs for x-ray detection in the spectrometer arm. The spectrometer with high resolving power disperses x-rays vertically. The x-ray vertical position on the sensor plane is related to its energy. This allows for very accurate x-ray energy measurements through x-ray coordinates. X-rays interact with silicon and create a number of electron-hole pairs proportional to the x-ray energy. Electrons drift and diffuse toward pixel gates and are collected there. The diffused electrons form a charge cloud distributed over several neighboring pixels. This charge sharing enables coordinate measurements with accuracy better than the pixel pitch. The charge distribution shape has to be taken into account to achieve ultimate accuracy in coordinate measurements. In this paper, we present a method of the charge distribution shape analysis and demonstrate its applications. The drift and diffusion of electrons ftom the point of generation to pixel gates results in the bell-shaped electron cloud usually approximated by Gaussian shape. The number of electrons collected under a pixel is proportional to the shape function integral. These electron packets get transferred to the sense node of the output amplifier. The transfer process could introduce distortions to the original charge distribution. For example, during transfers, electrons in the packet could be exposed to traps if they are present in the sensor. The trapping and later the release processes distort the apparent shape of the charge distribution. Therefore, deviations of the charge distribution shape ftom the originally symmetrical form can indicate the presence of trap centers in the sensor and can be used for sensor diagnostics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Assessing laser powder bed fusion system geometric errors through artifact-based methods

Additive manufacturing (AM) machines have developed more rapidly than standardized frameworks needed for the qualification of their geometric capabilities. While some manufacturer-specific methods exist to test capabilities and perform some calibration tasks, standardization efforts have only recently been undertaken in the form of ISO/ASTM 52902. In this study, the recommended methodology prescribed by the standard was implemented by building geometric artifacts with a laser powder bed fusion (LPBF) system and performing dimensional inspection with a coordinate measurement machine (CMM), amongst other methods. Typical dimensional capabilities of the LPBF system are identified and commentary is made on applying metrology methods, detecting geometric error, and diagnosing base causes in the LPBF system. In doing so, favored metrology practices and measurement analysis methods auxiliary to the standard are proposed. Artifact measurements were used to characterize beam positioning error and beam offset error. Methods for decoupling the effects of error sources are proposed. Difficulties in the inspection of AM components are identified, and the effects of various CMM measurement strategies are evaluated. Insights on the application of the new standard are presented, along with commentary as to its fitness for the LPBF process.

Berez, J.↗
DOE OSTI2025

PID-Regulated Heating System for PIP-II Reference Line

The Proton Improvement Plan 2 (PIP-II) centers on building a new superconducting linear particle accelerator (Linac) at Fermilab. At the heart of the accelerator is the reference line. It is a critical system that defines the ideal path for the beam as it passes through magnets, RF cavities, and other beamline elements. Temperature stability is crucial for the reliable operation of RF components, such as mixers and filters. Fluctuations affect key performance parameters like conversion loss, isolation, and linearity. To mitigate any drift caused by ambient temperature changes, a heating plate assembly is utilized to maintain key components at a controlled temperature of 40 C. Utilizing an actively regulated heating system, a metal-oxide-semiconductor field-effect transistor (MOSFET) based power control circuit which provides input to a controller; forming a closed-loop system that maintains the desired setpoints with high precision.

Mosher, Alexander [U. Illinois, Chicago]↗
DOE OSTI2024

Non-classical crystallization in soft and organic materials

Classical nucleation and crystal growth theories describe how nuclei form, become stable after reaching a critical size and then enlarge through monomer attachment. More than two decades ago, non-classical pathways have been proposed for various types of (bio)molecules and materials, which can substantially alter the crystallization kinetics and outcomes. Direct observation of non-classical crystallization of inorganic nanomaterials, including metastable structure-mediated and particle attachment-based pathways that usually occur on the nanoscale, was enabled by in situ liquid-phase electron microscopy. However, it was not until recently that the crystallization dynamics of beam-sensitive soft materials were directly imaged with sufficient spatial resolution, and a level of microstructural understanding of defects and interfaces emerged. This article provides a high-level review of the non-classical crystallization pathways discovered in soft and organic materials and a forward-looking guide for future research. We first analyse how the characteristics of soft materials affect their crystallization pathways and kinetics. We then identify technical approaches to studying the crystallization trajectories of soft materials and discuss strategies to properly select and apply them to different systems. Breakthroughs made in understanding the crystallization of small organic molecules, (bio)macromolecules, colloids and reticular framework materials are examined. Lastly, we provide an outlook on the challenges in elucidating soft material crystallization pathways and the opportunities for assisting the design and synthesis of new materials and structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural tunability and origin of two-level systems in amorphous silicon

Amorphous silicon films prepared by electron-beam evaporation have systematically and substantially greater atomic density for higher thickness, higher growth temperature, and slower deposition rate, reaching the density of crystalline Si when films of thickness greater than ~300 nm are grown at 425 °C and at <1 Å/s. Here, a combination of spectroscopic techniques provide insight into atomic disorder, local strains, dangling bonds, and nanovoids. Electron diffraction shows that the short-range order of the amorphous silicon is similar at all growth temperatures, but fluctuation electron microscopy shows that films grown above room temperature show a form of medium-range order not previously observed in amorphous silicon. Atomic disorder and local strain obtained from Raman spectroscopy are reduced with increasing growth temperature and show a nonmonotonic dependence on thickness. Dangling bond density decreases with increasing growth temperature and is only mildly dependent on thickness. Positron annihilation Doppler broadening spectroscopy and electron energy loss spectroscopy show that nanovoids, and not density variations within the network, are responsible for reduced atomic density. Specific heat and mechanical loss measurements, which quantify the density of tunneling two-level systems, in combination with the structural data, suggest that two-level systems in amorphous silicon films are associated with nanovoids and their surroundings, which are in essence loosely bonded regions where atoms are less constrained.

36 MATERIALS SCIENCE↗
DOE OSTI2024

MARSAME Radiological Release Report for Metal Items from Technical Area 53, Set 28

Environmental Protection and Compliance, Environmental Stewardship Group (EPC-ES) has evaluated the survey results for metal items from the Los Alamos Neutron Science Center (LANSCE) at Technical Area 53 (TA-53) and found that the metal items described in Table 1 of this report (identified by Radiation Protection [RP] Tracking Numbers) meet the criteria for unrestricted release under Department of Energy (DOE) Order 458.1 Chg 4, Radiation Protection of the Public and the Environment (DOE 2020) and can be recycled. This conclusion is based on the known history of the metal items and radiation survey data (see the completed RP-Form-031 LANSCE Metals Clearance Log [LANL 2021a] for each item in Attachment 1). Process knowledge indicates that items were released from radiological areas, including radiation areas, prior to the implementation of the 2000 metals moratorium. Therefore, the items are considered unencumbered and are not subject to the moratorium suspension on metal recycling from DOE facilities. Additionally, Los Alamos National Laboratory (LANL) has determined that there is no practical opportunity for internal DOE reuse of this metal. Process knowledge indicates that these metal items were unlikely to ever be in direct contact with the beam and thus are unlikely to have become activated. Surface contamination measurements (both total and removable) showed either no detectable radioactivity or activity levels within the range of background. All measurements for volumetric contamination were indistinguishable from background based on calculated decision limits. Additionally, all gamma isotopic surveys conducted for defense-in depth showed no identifiable gamma radiation from beam activation.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2023

Availability and reactivity of N 2 ( v ) for NH 3 synthesis by plasma catalysis

Production of vibrationally excited N 2 (N 2 (v)) in atmospheric pressure nonthermal plasma and loss of N 2 (v) by gas-phase reactions and reactions on catalytic surfaces are analyzed to examine the role of N 2 (v) in NH 3 formation by plasma catalysis. Vibrational state-to-state kinetic models complemented with molecular beam mass spectrometry (MBMS) measurements demonstrate that N 2 (v> 0) is produced with densities 100× greater than the density of N radicals by a radiofrequency atmospheric pressure plasma jet. The experimentally measured loss of N 2 (v) corresponds with a state-to-state kinetic model that describes loss of N 2 (v) by surface-mediated vibrational relaxation without consideration of reactions that convert N 2 (v) to NH 3 over the catalyst surface. Rate constants for vibrational relaxation of N 2 (v) on catalyst surfaces exceed upper bounds on proposed rate constants for NH 3 formation reactions from N 2 (v) over Fe when v < 9, Ni when v < 18, and Ag when v < 39, which indicates that only higher vibrational levels can possibly contribute to catalytic NH 3 formation faster than they undergo vibrational relaxation on the surface. Densities of N 2 (v> 8), vibrational levels that can possibly react over Fe to form NH 3 faster than they undergo vibrational relaxation, are less than or similar to N densities at the inlet of the catalyst bed and measured NH 3 formation for the investigated conditions in this work, while densities of N 2 (v> 17) and N 2 (v> 38) are orders of magnitude below the N density at the inlet of the catalyst bed and the measured NH 3 formation. The loss of N 2 (v) by vibrational relaxation on the surface limits the ability of N 2 (v) to contribute to catalytic NH 3 formation and explains why N 2 (v) does not produce NH 3 in quantities that are comparable to NH 3 formation from N even though N 2 (v > 0) is more abundantly produced by the plasma.

state-to-state kinetic modeling↗
DOE OSTI2023

Microstructural analysis of tristructural isotropic particles in high-temperature steam mixed gas atmospheres

High-temperature gas-cooled reactors (HTGRs) use tristructural isotropic (TRISO) particles embedded in a graphitic matrix material to form the integral fuel element. Potential off-normal reactor conditions for HTGRs include steam ingress with temperatures above 1,000 °C. Fuel element exposure to steam can cause the graphitic matrix material to evolve, forming an atmosphere composed of oxidants and oxidation products and potentially exposing the TRISO particles to these conditions. Investigating the oxidation response of TRISO particles exposed to a mixed gas atmosphere will provide insight into the stability under off-normal conditions. In this study, surrogate TRISO particles were exposed to high temperatures (T = 1,200 °C) in flowing steam (3% < pH 2 O < 21%) and CO (pCO < 1%) to determine the oxidation behavior of the SiC layer when exposed to various mixed gas atmospheres. Scanning electron microscopy, x-ray diffraction, and focused ion beam milling was used to determine the impact of CO and steam on the oxidation behavior of the SiC layer. Therefore, the data presented demonstrates how the SiC layer showed strong oxidation resistance due to limited SiO 2 growth and maintained its structural integrity under these off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Half-life measurement of the 199-keV isomeric state in Ga 76

Background: Isomeric states in atomic nuclei are a sensitive probe of their underlying microscopic structure and can be used to study the evolution of shell structure far from stability. Recent studies have identified and provided detailed spectroscopy of isomers in neutron-rich nuclei with Z = 28-50. Isomeric states in the odd-odd gallium isotopes have been reported for all gallium isotopes from A = 72 to A = 80 with the exception of 76 Ga. Purpose: The purpose of this experiment was to observe short-lived isomeric states in the vicinity of 78 Ni. Methods: In-beam fragmentation of a 86 Kr primary beam at the National Superconducting Cyclotron Laboratory produced radioactive ions which were delivered to and deposited in a Ce Br 3 scintillator coupled to a position-sensitive photomultiplier tube. Beta-delayed γ rays were measured by ancillary HPGe clover and LaBr 3 detectors which surrounded the implantation detector. Results: The previously observed J π = 1 + , 199-keV level in 76 Ga, populated following the β decay of 76 Zn, was identified as isomeric with a half-life of 34(1) stat. (8) sys. ns. Shell-model calculations suggest this state is formed by the coupling of protons in negative-parity configurations to 1/2 - neutron configurations. Transition strengths assuming a ground-state spin of J = 2 and J = 3 were determined from the experimental data.

59 ≤ A ≤ 89↗
DOE OSTI2021

Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy

Here, a CrCoNi based medium entropy alloy with small additions of Ti, Al and Nb (denoted as (CrCoNi) 93 Al 4 Ti 2 Nb) in the as-quenched condition, exhibits tensile properties comparable to those of the equiatomic CrCoNi alloy at room temperature. Dark field transmission electron microscopy (TEM), atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) together with atom probe tomography (APT) show that spatially-localized long range ordering (LRO) L1 2 domains exist in this alloy. The evolution of deformation substructure with plastic deformation in this alloy was characterized using electron backscatter diffraction (EBSD), electron channeling contrast imaging (ECCI) and STEM based techniques including the recently developed weak beam dark field STEM imaging. Plastic deformation occurs by the slip of a/2<110>dislocations, which are narrowly dissociated into Shockley partial dislocations on {111} slip planes. Their dissociation distances in the (CrCoNi) 93 Al 4 Ti 2 Nb alloy are much smaller than the widths of the corresponding partials in the equiatomic CrCoNi alloy due to one or more of the minor alloying elements (Al, Ti, Nb). Dislocation slip in this alloy has a pronounced planar character. The leading dislocations in slip bands glide as pairs due to the existence of LRO domains. Multipoles were formed through the slip of dislocations with opposite signs on adjacent {111} slip planes. Those multipoles serve as building blocks for the formation of subgrain structures consisting of fine slip bands. The distances between slip bands were continuously refined during plastic deformation and dynamic refinement of slip bands plays a crucial role in strain hardening. The effects of LRO domains on planar dislocation slip, the deactivation of deformation twinning and strain hardening of this alloy are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Combined Crossed Molecular Beam and Theoretical Investigation of the Elementary Reaction of Tricarbon (C 3 (X 1 Σ g + )) with Diacetylene (C 4 H 2 (X 1 Σ g + )): Gas Phase Formation of the Heptatriynylidyne Radical ( l -C 7 H(X 2 Π))

An elucidation of the underlying formation pathways to acyclic hydrocarbons such as polyynes (C n H 2 ), cumulenes (C n H 2 ), and linear resonantly stabilized linear radicals (l-C n H) is indispensable to understand the hydrocarbon chemistry in extreme low and high temperature environments. In this study, we exploited the crossed molecular beam technique to investigate the reaction of tricarbon C 3 (X 1 Σ g + ) with diacetylene (butadiyne; HCCCCH; X 1 Σ g + ) at a collision energy of 47 ± 1 kJ mol ⁻1 . The experimental data were merged with ab initio calculations of the singlet C 7 H 2 potential energy surface (PES) revealing that the reaction is initiated via the formation of an initial van der Waals reactant complex in the entrance channel. Subsequent rearrangements lead to various carbene-type and cyclic intermediates via ring-opening, ring-closure, and hydrogen migration processes eventually forming acyclic C 7 H 2 isomers prior to their barrierless unimolecular decomposition to the most stable linear isomer, heptatriynylidyne (C 7 H, X 2 Π) in an overall endoergic reaction (+57 kJ mol ⁻1 ). The reaction exhibits strong similarities to the tricarbon – acetylene (C 3 – C 2 H 2 ). Furthermore, the significant energy threshold suggests that the tricarbon reaction with (poly)acetylenes forming resonantly stabilized linear radicals are open in high-temperature environments such as combustion flames and circumstellar envelopes of carbon stars and planetary nebulae as their descendants; however, these reactions are closed in low-temperature environments as in cold molecular clouds and hydrocarbon-rich atmospheres of planets and their moons such as in Titan.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermally Initiated Formation of Criegee Intermediate CH 2 OO in the Oxidation of Ethane

Criegee intermediates (CIs) play an important role in atmospheric chemistry as a transient source of the OH radical through their formation by the ozonolysis of unsaturated organic compounds. Here, we report thermally initiated formation of the smallest CI (CH 2 OO) in the oxidation of ethane (CH 3 CH 3 ) that may be relevant to combustion and flames. The SiO 2 /SiC oxidation microreactor is heated to 1800 K and has a short residence time of ∼100 μs. The CH 2 OO we observe is likely formed in a lower-temperature region near the microreactor’s exit. Plausible mechanisms for CH 2 OO formation and retention under these conditions mediated by methylperoxy (CH 3 OO) radicals are discussed. Pure rotational spectra of CH 2 OO and other intermediates (HO 2 , CH 3 CHO, CH 2 CHOH, c-CH 2 OCH 2 , CH 3 CH 2 CHO, CH 3 OOH, and HCOOH) are detected with a chirped-pulse Fourier transform millimeter-wave spectrometer operating in the frequency range of 60–90 GHz. In conclusion, detection occurs in a molecular beam, where the species are supersonically cooled to 5 K.

Hydrocarbons↗
DOE OSTI2022

Time resolved in-situ multi-contrast X-ray imaging of melting in metals

In this work, the application of a time resolved multi-contrast beam tracking technique to the investigation of the melting and solidification process in metals is presented. The use of such a technique allows retrieval of three contrast channels, transmission, refraction and dark-field, with millisecond time resolution. We investigated different melting conditions to characterize, at a proof-of-concept level, the features visible in each of the contrast channels. We found that the phase contrast channel provides a superior visibility of the density variations, allowing the liquid metal pool to be clearly distinguished. Refraction and dark-field were found to highlight surface roughness formed during solidification. This work demonstrates that the availability of the additional contrast channels provided by multi-contrast X-ray imaging delivers additional information, also when imaging high atomic number specimens with a significant absorption.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Neutron scattering off Weyl semimetals

We present how to detect type-I Weyl nodes in a material by inelastic neutron scattering. Such an experiment first of all allows one to determine the dispersion of the Weyl fermions. We extend the reasoning to produce a quantitative test of the Weyl equation, taking into account realistic anisotropic properties. These anisotropies are mostly contained in the form of the emergent magnetic moment of the excitations, which determines how they couple to the neutrons. Although there are many material parameters, we find several quantitative predictions that are universal and demonstrate that the excitations are described by solutions to the Weyl equation. The anisotropic coupling between electrons and neutrons implies that even fully unpolarized neutrons can reveal the spin-momentum locking of the Weyl fermions because the neutrons will couple to some components of the Weyl fermion pseudospin more strongly. On the other hand, in an experiment with polarized neutrons, the scattered neutron beam remains fully polarized in a direction that varies as a function of momentum transfer (within the range of validity of the Weyl equation). This allows measurement of the chirality of Weyl fermions for inversion-symmetric nodes. Furthermore, in this work we estimate that the scattering rate may be large enough for such experiments to be practical; in particular, the magnetic moment may be larger than the ordinary Bohr magneton, compensating for a small density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Ternary Potassium‐Bismuth‐Telluride Intermetallic Support Promotes Electrochemical Stability in Potassium Metal Anodes

We employed accumulative roll bonding to fabricate self‐standing metallurgical composite of in situ formed alkaline potassium‐bismuth‐telluride intermetallic K 2 (Bi 2/6 Te 3/6 Vac 1/6 ) embedded in potassium metal. This newly discovered thermodynamically stable potassiophilic crystal, termed “KBT”, is fcc antifluorite with K 2 Te archetype. Symmetric cells achieve 880 h of cycling at 0.5 mA cm −2 and 0.5 mAh cm −2 . Potassium metal battery (KMB) with Prussian blue (PB) cathode in carbonate electrolyte retains 80% capacity after 200 cycles at 1C. In ether‐based electrolyte with organic cathode, it achieves 80% retention after 900 cycles at 2C. Combined synchrotron X‐ray nano‐tomography, cryogenic‐focused ion beam microscopy (Cryo‐FIB) and sputter‐down X‐ray photoelectron spectroscopy (XPS) demonstrate uniform electrodeposits, versus baseline of potassium filaments intermixed with pores and coarse SEI. Binary K 3 Bi‐K and K 2 Te‐K intermetallic supports also provide improved electrochemical performance, albeit to lesser extent. Multiscale simulation provides insight into role of support structure in adatom energetics, film nucleation, early‐stage SEI morphology and interfacial stability.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Isomeric states in the neutron-rich 𝑁 = 108 nuclei 178 Yb and 179 Lu

A multinucleon transfer reaction with a 136 Xe beam and a gold-backed 176 Yb target populated isomers in N = 108 178 Yb and 179 Lu. The single decay from the t 1/2 = 203(16) ns isomer in 178 Yb to the I π = 4 + level in the ground-state band suggests a I π = 4 − assignment, and multiquasiparticle calculations associate this state with the K π = 4 − , ν 2 (1/2[510], 9/2[624]) configuration. At least two isomers were observed in 179 Lu. One likely couples the K π = 4 − configuration found in 178 Yb to the 9/2[514] quasiproton orbital to form a K π = 17/2 + level (t 1/2 = 1.0(4) µs) which primarily decays into the rotational band based on the 9/2[514] state. A second isomer was observed to decay into this same band, but at higher energy and spin. Based on its feeding pattern, its similarity to an isomer found in 181 Ta, and a multiquasiparticle calculation, it is proposed to correspond to a K π = 29/2 − state based on the π9/2[514]ν 2 (9/2[624], 11/2[615]) configuration. As a result, an analysis of the reduced hindrance factors for negative-parity, two-quasineutron isomers in the rare-earth region is presented as well.

150 ≤ A ≤ 189↗
DOE OSTI2026

The high level trigger and express data production at STAR

To meet the demands of the Beam Energy Scan phase-II (BES-II) program, the STAR experiment at the Relativistic Heavy Ion Collider (RHIC) developed a dual real-time framework consisting of a High Level Trigger (HLT) and an Express Data Production system (xProduction). The HLT operates online within the Data Acquisition (DAQ) chain on a dedicated multi-core CPU cluster with the option to offload compute-intensive kernels to Xeon Phi coprocessors. It uses parallelized algorithms, such as the Cellular Automaton (CA) Track Finder, to perform rapid tracking, vertexing, and event filtering. This allows it to select events of interest in real time and provide immediate feedback on detector and beam conditions. In contrast, the xProduction workflow runs concurrently and independently of the DAQ loop. It applies near offline-quality calibration and reconstruction within hours of data collection. The xProduction input is the express data stream, whose content can be enriched by HLT trigger/priority selections under DAQ/HLT resource constraints, and it uses the STAR calibration/conditions framework, incorporating online calibration/QA information when available. This enables early preliminary physics analysis, including the reconstruction of rare signals, such as hyperons and hypernuclei. It also provides collaboration-wide access to analysis-ready datasets. Together, the HLT and xProduction systems form a complementary architecture: the HLT performs online event selection while the xProduction chain delivers high-quality results within a short amount of time. This integrated framework has enabled the prompt reconstruction of the $^5_Λ$ He hypernucleus with high statistical significance and the efficient processing of hundreds of millions of heavy-ion collision events. In conclusion, its demonstrated scalability and robustness establish a model for future high-luminosity experiments requiring both online event filtering and rapid access to analysis-quality data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗