Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base Line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Strong nebular emissions associated with Mg ii absorptions detected in the SDSS spectra of background quasars

ABSTRACT We present long-slit spectroscopic observations of 40 Galaxy On Top of Quasars (GOTOQs) at ${0.37 \leqslant z \leqslant 1.01}$ using the South African Large Telescope. Using this and available photometric data, we measure the impact parameters of the foreground galaxies to be in the range of 3–16 kpc with a median value of 8.6 kpc. This is the largest sample of galaxies producing Mg ii absorption at such low impact parameters. These quasar–galaxy pairs are ideal for probing the disc–halo interface. At such impact parameters, we do not find any anticorrelation between rest equivalent width (REW) of Ca ii, Mn ii, Fe ii, Mg ii, and Mg i absorption and impact parameter. These sight lines are typically redder than those of strong Mg ii absorbers, with the colour excess, E(B − V) for our sample ranging from −0.191 to 0.422, with a median value of 0.058. In the E(B − V) versus W3935 plane, GOTOQs occupy the same region as Ca ii absorbers. For a given E(B − V), we find larger W3935 than what has been found in the Milky Way, probably due to a smaller dust-to-gas ratio in GOTOQs. Galaxy parameters could be measured for twelve cases, and their properties seem to follow the trends found for strong Mg ii absorbers. Measuring the host galaxy properties for the full sample using HST photometry or AO-assisted ground-based imaging is important to gain insights into the relationship between the stellar mass of galaxies and the metal line REW distributions at low impact parameters.

Astronomy & Astrophysics↗
DOE OSTI2024

Assessing Resilience in Lane Detection Methods: Infrastructure-Based Sensors and Traditional Approaches for Autonomous Vehicles

Traditional autonomous vehicle perception subsystems that use onboard sensors have the drawbacks of high computational load and data duplication. Infrastructure-based sensors, which can provide high quality information without the computational burden and data duplication, are an alternative to traditional autonomous vehicle perception subsystems. However, these technologies are still in the early stages of development and have not been extensively evaluated for lane detection system performance. Therefore, there is a lack of quantitative data on their performance relative to traditional perception methods, especially during hazardous scenarios, such as lane line occlusion, sensor failure, and environmental obstructions. We address this need by evaluating the influence of hazards on the resilience of three different lane detection methods in simulation: (1) traditional camera detection using a U-Net algorithm, (2) radar detections using infrastructure-based radar retro-reflectors (RRs), and (3) direct communication of lane line information using chip-enabled raised pavement markers (CERPMs). The performance of each of these methods is assessed using resilience engineering metrics by simulating the individual methods for each sensor technology’s response to related hazards in the CARLA simulator. Using simulation techniques to replicate these methods and hazards acquires extensive datasets without lengthy time investments. Specifically, the resilience triangle was used to quantitatively measure the resilience of the lane detection system to obtain unique insights into each of the three lane detection methods; notably the infrastructure-based CERPMs and RRs had high resistance to hazards and were not as easily affected as the vision-based U-Net. However, while U-Net was able to recover the fastest from the disruption as compared to the other two methods, it also had the most performance loss. Overall, this study demonstrates that while infrastructure-based lane keeping technologies are still in early development, they have great potential as alternatives to traditional ones.

Patil, Pritesh↗
DOE OSTI2020

Prospects for Characterizing the Haziest Sub-Neptune Exoplanets with High-resolution Spectroscopy

Observations to characterize planets larger than Earth but smaller than Neptune have led to largely inconclusive interpretations at low spectral resolution due to hazes or clouds that obscure molecular features in their spectra. However, here we show that high-resolution spectroscopy (R ∼ 25,000–100,000) enables one to probe the regions in these atmospheres above the clouds where the cores of the strongest spectral lines are formed. We present models of transmission spectra for a suite of GJ 1214b–like planets with thick photochemical hazes covering 1–5 μm at a range of resolutions relevant to current and future ground-based spectrographs. Furthermore, we compare the utility of the cross-correlation function that is typically used with a more formal likelihood-based approach, finding that only the likelihood-based method is sensitive to the presence of haze opacity. We calculate the signal-to-noise ratio (S/N) of these spectra, including telluric contamination, Required to robustly detect a host of molecules such as CO, CO{sub 2}, H{sub 2}O, and CH{sub 4} and photochemical products like HCN as a function of wavelength range and spectral resolution. Spectra in the M band require the lowest S/N{sub res} to detect multiple molecules simultaneously. CH{sub 4} is only observable for the coolest models (T {sub eff} = 412 K) and only in the L band. We quantitatively assess how these requirements compare to what is achievable with current and future instruments, demonstrating that characterization of small cool worlds with ground-based high-resolution spectroscopy is well within reach.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Fault Diagnosis of Double Pitch Time-Sharing Meshing Toothed Conveyor Chain Transmission System Based on Neural Network

With the rapid development of industry, the production and demand of automobiles have increased significantly. The generation of cars often requires tens of thousands of processes, consisting of hundreds of assembly lines to complete. Chain conveyors are widely used in the transportation of automobile assembly lines. The existing conveyor chains are roller chains. With the improvement of the requirements for conveyor reliability, synchronization, and environmental friendliness, the characteristics of roller conveyor chains restrict the further development of chain conveyors. It is urgent to study a new conveyor chain system to improve the synchronization, reliability, and environmental friendliness of chain conveyors on hundreds of assembly lines. In this paper, the mathematical modeling, meshing analysis, reliability, and environmental friendliness of the parameters of the components of the double pitch time-sharing meshing toothed conveyor chain system are studied. In addition, a novel fault diagnosis method of double pitch time-sharing meshing toothed conveyor chain transmission system based on neural network model is proposed in this paper.

Ding, Song↗
DOE OSTI2022

Structural variant analysis of a cancer reference cell line sample using multiple sequencing technologies

The cancer genome is commonly altered with thousands of structural rearrangements including insertions, deletions, translocation, inversions, duplications, and copy number variations. Thus, structural variant (SV) characterization plays a paramount role in cancer target identification, oncology diagnostics, and personalized medicine. As part of the SEQC2 Consortium effort, the present study established and evaluated a consensus SV call set using a breast cancer reference cell line and matched normal control derived from the same donor, which were used in our companion benchmarking studies as reference samples. We systematically investigated somatic SVs in the reference cancer cell line by comparing to a matched normal cell line using multiple NGS platforms including Illumina short-read, 10X Genomics linked reads, PacBio long reads, Oxford Nanopore long reads, and high-throughput chromosome conformation capture (Hi-C). We established a consensus SV call set of a total of 1788 SVs including 717 deletions, 230 duplications, 551 insertions, 133 inversions, 146 translocations, and 11 breakends for the reference cancer cell line. To independently evaluate and cross-validate the accuracy of our consensus SV call set, we used orthogonal methods including PCR-based validation, Affymetrix arrays, Bionano optical mapping, and identification of fusion genes detected from RNA-seq. We evaluated the strengths and weaknesses of each NGS technology for SV determination, and our findings provide an actionable guide to improve cancer genome SV detection sensitivity and accuracy. A high-confidence consensus SV call set was established for the reference cancer cell line. A large subset of the variants identified was validated by multiple orthogonal methods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cohesive and adhesive degradation in PET-based photovoltaic backsheets subjected to ultraviolet accelerated weathering

Delamination between layers in photovoltaic (PV) backsheets is often reported in the literature, causing voids that can collect moisture, diminish module backside heat dissipation, and reduce the backsheet’s effectiveness as a physical barrier. While backsheets with weathering-resistant fluoropolymer outer layers have traditionally been used in modules, more recent backsheets using non-fluoropolymer outer layers, such as polyethylene terephthalate (PET), have been developed. These backsheets have shown signs of premature degradation, and their adhesion degradation, in particular, has not been widely studied. In the present work, the single cantilever beam (SCB) adhesion test was used to quantify the adhesion energy in two commercially available PET-based backsheets. To study the effect of minor changes in formulation, the backsheets were obtained from same manufacturer and product line but during different years. To study the effect of environmental variables on adhesion degradation, the backsheets were subjected to artificial weathering at controlled temperature, humidity, and ultraviolet (UV) radiation in an indoor weathering chamber, and the adhesion energy was quantified at several intervals of exposure time. Layering structure, composition, and adhesion failure mode were compared between the backsheets, using Raman and infrared spectroscopy and thermogravimetric analysis. The results show a large difference in initial (unexposed) adhesion energy between the backsheets, despite very similar structures and compositions. Following exposure, adhesion energy dropped significantly, primarily due to thermo-hydrolytic degradation of the polyurethane (PU)-based adhesive layers. Significant UV-induced adhesion degradation of the PET outer layer surface was also observed. The study represents an important step in understanding adhesion degradation in PET-based backsheets, suggesting ways in which adhesion integrity – and, correspondingly, module service life – can be improved.

14 SOLAR ENERGY↗
DOE OSTI2024

High Harmonic Generation Seeding Echo-Enabled Harmonic Generation toward a Storage Ring-Based Tender and Hard X-ray-Free Electron Laser

To align with the global trend of integrating synchrotron light source (SLS) and free electron laser (FEL) facilities on one site, in line with examples such as SPring-8 and SACLA in Japan and ELETTRA and FERMI in Italy, we actively explore FEL options leveraging the ultralow-emittance electron beam of the NSLS-II upgrade. These options show promising potential for synergy with storage ring (SR) operations, thereby significantly enhancing our facility’s capabilities. Echo-enabled harmonic generation (EEHG) is well-suited to SR-based FELs, and has already been demonstrated with the capability of generating extremely narrow bandwidth as well as high brightness, realized using diffraction-limited short pulses in transverse planes and Fourier transform-limited bandwidth in the soft X-ray spectrum. However, regarding a conventional EEHG scheme, the combination of the shortest seed laser wavelength (256 nm) and highest harmonic (200) sets the short wavelength limit to λ = 1.28 nm. To further extend the short wavelength limit down to the tender and hard X-ray region, a vital option is to shorten the seed laser wavelength. Thanks to recent advances in high harmonic generation (HHG), packing 10 9 photons at one harmonic within a few-femtosecond pulse could turn such a novel HHG source into an ideal seeding for EEHG. Thus, compared to the cascaded EEHG, the HHG seeding option could not only lower the cost, but also free the SR space for accommodating more user beamlines. Moreover, to mitigate the SASE background noise on the sample and detector, we combine the HHG seeding EEHG with the crab cavity short pulse scheme for maximum benefit.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Isospin symmetry holds beyond the proton drip line: First observation of excited states in 55Cu

Isospin symmetry, combined with shell-model description, has long been successful in reproducing nuclear structure and predicting mirror energy differences. However, these descriptions have been primarily limited to mirror nuclei with well-bound ground states. As one approaches the proton drip line, coupling to the continuum becomes important. Despite this, little is known about medium-mass nuclei at the drip line. Here we report the measurement of the excitation energies of several unbound states in a nucleus beyond the proton drip line, 55Cu, performed via γ-ray spectroscopy at the Radioactive Isotope Beam Factory (RIKEN). Several low-lying yrast states are observed to decay predominantly by γ-ray emission. In contrast, the state–predicted to be strongly populated in the one-proton knockout reaction–is notably absent, suggesting that it decays primarily via prompt proton emission. We show that even for such an unbound system, shell-model calculations based on a harmonic oscillator potential reproduce the observed mirror energy differences remarkably well in all the observed states. Based on this result, we propose that a general pattern might emerge where, in medium-mass systems at the proton drip line, the stronger Coulomb barrier together with the centrifugal barrier effectively confines the wave functions, so that the shell model is able to describe low-lying states, enabling accurate predictions of mirror energy differences between isobaric analogue states.

Pigliapoco, S [Dipartimento di Fisica e Astronomia↗
DOE OSTI2022

Post-Disaster Microgrid Formation for Enhanced Distribution System Resilience

This paper proposes a deep reinforcement learning (DRL) based approach for post-disaster critical load restoration in active distribution systems to form microgrids through network reconfiguration to minimize critical load curtailments. Distribution networks are represented as graph networks, and optimal network configurations with microgrids are obtained by searching for the optimal spanning forest. The constraints to the research question being explored are the radial topology and power balance. Unlike existing analytical and population-based approaches, which necessitate the repetition of entire analyses and computation for each outage scenario to find the optimal spanning forest, the proposed approach, once properly trained, can quickly determine the optimal, or near-optimal, spanning forest even when outage scenarios change. When multiple lines fail in the system, the proposed approach forms microgrids with distributed energy resources in active distribution systems to reduce critical load curtailment. The proposed DRL-based model learns the action-value function using the REINFORCE algorithm, which is a model-free reinforcement learning technique based on stochastic policy gradients. A case study was conducted on a 33-node distribution test system, demonstrating the effectiveness of the proposed approach for post-disaster critical load restoration.

active distribution systems↗
DOE OSTI2026

Integrated Strategies for Overcoming Resolution Limits in Electron Beam Lithography of Chemically Amplified Resists

Electron beam lithography (EBL) of chemically amplified resists (CARs) faces fundamental challenges, including stochastic electron scattering and acid diffusion, that limit resolution and reproducibility. Using SU-8 as a model CAR, this study systematically investigated complementary strategies to address these challenges, combining multipass exposure, proximity effect correction (PEC) with midrange correction factors, base quencher incorporation, and post-exposure bake (PEB) suppression. Monte Carlo simulations and calibrated PEC modeling revealed that extending the point spread function to include a midrange scattering component significantly improved critical dimension (CD) control across varying pattern densities, correcting deviations that conventional two-term PEC failed to capture. Multipass exposure, particularly 4-pass writing with a 25% offset, redistributed the dose to average stochastic beam and scattering fluctuations, reducing line-width roughness by more than 50% and yielding more uniform nanoscale features. Photoacid confinement was investigated by adding urea as a base quencher, which successfully reduced acid diffusion but introduced substantial sensitivity penalties without improving ultimate resolution or Z-factor performance, underscoring the trade-offs of chemical versus physical confinement. Suppressing PEB most directly minimized acid diffusion, resulting in improved Z-factors and reproducible 30 nm half-pitch dense line/space patterns. Overall, these results demonstrated that PEC with midrange correction, multipass strategies, quencher additives, and PEB-free processing addresses different aspects of the EBL process window and that their integration provides a comprehensive framework for managing stochastic scattering, diffusion, and chemical amplification effects. This framework advances dense nanoscale patterning in CARs and establishes guiding principles for optimizing resist design and process strategies in high-resolution EBL and potentially other advanced lithographies, such as extreme ultraviolet (EUV) lithography.

36 MATERIALS SCIENCE↗
DOE OSTI2020

OGLE-2017-BLG-0406: Spitzer Microlens Parallax Reveals Saturn-mass Planet Orbiting M-dwarf Host in the Inner Galactic Disk

We report the discovery and analysis of the planetary microlensing event OGLE-2017-BLG-0406, which was observed both from the ground and by the Spitzer satellite in a solar orbit. At high magnification, the anomaly in the light curve was densely observed by ground-based-survey and follow-up groups, and it was found to be explained by a planetary lens with a planet/host mass ratio of q=7.0×10{sup −4} from the light-curve modeling. The ground-only and Spitzer-“only” data each provide very strong one-dimensional (1D) constraints on the 2D microlens parallax vector π{sub E}. When combined, these yield a precise measurement of π{sub E} and of the masses of the host M{sub host}=0.56±0.07 M{sub ⊙} and planet M {sub planet} = 0.41 ± 0.05 M {sub Jup}. The system lies at a distance D {sub L} = 5.2 ± 0.5 kpc from the Sun toward the Galactic bulge, and the host is more likely to be a disk population star according to the kinematics of the lens. The projected separation of the planet from the host is a{sub ⊥}=3.5±0.3 au (i.e., just over twice the snow line). The Galactic-disk kinematics are established in part from a precise measurement of the source proper motion based on OGLE-IV data. By contrast, the Gaia proper-motion measurement of the source suffers from a catastrophic 10σ error.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Model-based real-time surface heat flux and temperature estimation for the DIII-D tokamak

A control-oriented model for monitoring of wall power flux densities on the DIII-D tokamak has been successfully implemented and validated experimentally. Future reactors will have to withstand severe steady state high heat flux loads on plasma-facing components (PFCs). Due to the difficulty of directly-measuring local heat fluxes on these components, monitoring and protection of PFCs during the plasma discharge can benefit from simplified physics-based real-time (RT) functional models to estimate and guide heat load control. As a first step into the development, a control-oriented model for monitoring of wall power flux densities and temperatures on DIII-D tokamak has been successfully implemented. The paper discusses the experimental demonstration and comparison of the 2-D model-based wall heat flux algorithm on the DIII-Dinner wall limiter (IWL) against infra-red camera heat flux measurements for limited plasma configurations. The paper also reports on the benchmarking of the field line tracing environment, SMITER, developed at ITER organization on DIII-D tokamak against experimental IR diagnostic data and the derivation of the component shaping weighting factors for the 2-D model-based approach. Here, the extension of the model-based approach for surface temperature estimation on the DIII-D IWL is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Picosecond laser generated plasma as a source of singly charged ions for external injection into an EBIS

The focus of this paper is on practical aspects of ion generation by picosecond lasers as a source of low charge state ions for external injection of ions into an electron beam ion source (EBIS). For a ps-laser, compared to a ns-laser currently used at Relativistic Heavy Ion Collier Electron Beam Ion Source (RHIC EBIS), the influence of heat conductivity in the solid target is almost negligible, which results in a lower target consumption rate and less vacuum pressure rise. By using a laser with high repetition rate, it is possible to produce quasi continuous 1+ ion beams for periods of tens of milliseconds, making it possible to take advantage of the ability of the EBIS to accumulate ions in the “slow” injection capture mode. Producing such an ion pulse train is now feasible since ps-lasers with pulse energy up to 10 mJ and rep-rate up to 10 kHz have recently become commercially available. The advantages of this lower current accumulation scheme include: (1) easier beam transport due to lower space charge of lower beam currents required compared to the present single pulse fast injection scheme, (2) better EBIS pulse to pulse ion output stability since pulse to pulse ion variations of the laser source are averaged over a long train of laser pulses, and (3) the possible addition of an isotope separator in which rare beams could be produced and selected at run time from less expensive (unenriched) targets. We studied the properties of plasmas generated by a ps-laser with 1.27 mJ energy within an 8 ps pulse and a repetition rate up to 400 Hz at Argonne National Laboratory to investigate feasibility and specify parameters for a laser ion source for RHIC EBIS using a “slow” injection mode. Al, Ti, Cu, Nb, and Ta targets were tested with various target translation speeds. Here, we demonstrated that a both “slow” and “fast” injection modes are accessible with a single ion source geometry and single injection line, providing the most attractive option for an ion source for external injection into RHIC EBIS trap based on a ps-laser.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Unveiling X-ray absorption signatures of boron nitride via first-principles simulation and machine learning

Boron nitride (BN) allotropes hold great promise in many advanced applications ranging from optical and photonic devices to energy storage and battery systems to tribological components. The diverse functionalities of this material stem from BN’s highly tunable structural and electronic properties, which are governed by the versatile boron–nitrogen bonding configurations. Exploring the structural landscape of BN can unveil novel structures possessing unique properties suited for specific applications, therefore accelerating the design of next-generation advanced functional materials. In this work, we leverage boron K-edge X-ray absorption spectroscopy (XAS) as an effective probe for local structural features and chemical environments. A total of 210 BN crystal structures are generated via analogies to the extensive array of carbon allotropes, and XAS is simulated for each unique local motif within the resulting collection of structures. A mapping between structural features and spectral signatures was established by synergizing first-principle simulations with data-driven based post-analysis approaches. Specifically, we developed a neural network model that can satisfactorily predict spectra line shapes from local structural descriptors. Toward automatic spectroscopic interpretation of any new BN structures, supervised machine learning models, trained on this structure–spectrum dataset, can accurately infer local coordination environments from simulated XAS, highlighting the strength of this unique approach of combining high-fidelity first-principles simulation and machine-learning to accelerate target design of novel BN materials via rational understanding of local structure-spectrum correlations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Titanium alloy response sensitivity to variations in spectral reconstructions of National Ignition Facility xenon line-emission x-ray sources

Thermomechanical shock experiments on the National Ignition Facility (NIF) aim to study high strain rate dynamic material response. In such experiments, the NIF laser is used to generate high fluence x-ray emission sources, which irradiate material samples of interest. Under sufficiently high x-ray energy deposition, thermomechanical impulses are generated in the materials. While it is known that the characteristics of x-ray generated impulses vary as a function of incident x-ray spectra, it remains unclear how spectral assumptions and uncertainties in NIF spectral reconstructions affect our interpretation of impulsive loading. Here, in this paper, we simulate the response of a standard titanium alloy baseline sample to synthetic analytically derived and measured NIF xenon line-emission x-ray sources with a radiation hydrodynamics code. We vary the source spectral characteristics based on different source reconstruction techniques to understand the resulting variation in baseline sample response and compare the simulated response with experimental results. We find that the response is highly sensitive to assumptions made about the spectral contents and that knowledge of spectral uncertainties bounds our understanding of the resulting material response. The results of this effort help to extend our ability to use baseline material samples to extract quantitative properties from x-ray experiments on the NIF.

Alloys↗
DOE OSTI2023

Transcription factor bHLH121 regulates root cortical aerenchyma formation in maize

Root anatomical phenotypes present a promising yet underexploited avenue to deliver major improvements in yield and climate resilience of crops by improving water and nutrient uptake. For instance, the formation of root cortical aerenchyma (RCA) significantly increases soil exploration and resource capture by reducing the metabolic costs of root tissue. A key bottleneck in studying such phenotypes has been the lack of robust high-throughput anatomical phenotyping platforms. We exploited a phenotyping approach based on laser ablation tomography, termed Anatomics , to quantify variation in RCA formation of 436 diverse maize lines in the field. Results revealed a significant and heritable variation for RCA formation. Genome-wide association studies identified a single-nucleotide polymorphism mapping to a root cortex-expressed gene-encoding transcription factor bHLH121. Functional studies identified that the bHLH121 Mu transposon mutant line and CRISPR/Cas9 loss-of-function mutant line showed reduced RCA formation, whereas an overexpression line exhibited significantly greater RCA formation when compared to the wild-type line. Characterization of these lines under suboptimal water and nitrogen availability in multiple soil environments revealed that bHLH121 is required for RCA formation developmentally as well as under studied abiotic stress. Overall functional validation of the bHLH121 gene’s importance in RCA formation provides a functional marker to select varieties with improved soil exploration and thus yield under suboptimal conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Measuring the thermal and ionization state of the low- z IGM using likelihood free inference

ABSTRACT We present a new approach to measure the power-law temperature density relationship $T=T_0 (\rho/ \bar{\rho })^{\gamma -1}$ and the UV background photoionization rate $\Gamma _{{{{\rm H\, {\small I}}}}{}}$ of the intergalactic medium (IGM) based on the Voigt profile decomposition of the Ly α forest into a set of discrete absorption lines with Doppler parameter b and the neutral hydrogen column density $N_{\rm H\, {\small I}}$. Previous work demonstrated that the shape of the $b-N_{{{{\rm H\, {\small I}}}}{}}$ distribution is sensitive to the IGM thermal parameters T0 and γ, whereas our new inference algorithm also takes into account the normalization of the distribution, i.e. the line-density dN/dz, and we demonstrate that precise constraints can also be obtained on $\Gamma _{{{{\rm H\, {\small I}}}}{}}$. We use density-estimation likelihood-free inference (DELFI) to emulate the dependence of the $b-N_{{{{\rm H\, {\small I}}}}{}}$ distribution on IGM parameters trained on an ensemble of 624 nyx hydrodynamical simulations at z = 0.1, which we combine with a Gaussian process emulator of the normalization. To demonstrate the efficacy of this approach, we generate hundreds of realizations of realistic mock HST/COS data sets, each comprising 34 quasar sightlines, and forward model the noise and resolution to match the real data. We use this large ensemble of mocks to extensively test our inference and empirically demonstrate that our posterior distributions are robust. Our analysis shows that by applying our new approach to existing Ly α forest spectra at z ≃ 0.1, one can measure the thermal and ionization state of the IGM with very high precision ($\sigma _{\log T_0} \sim 0.08$ dex, σγ ∼ 0.06, and $\sigma _{\log \Gamma _{{{{\rm H\, {\small I}}}}{}}} \sim 0.07$ dex).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Redshift-dependent RSD bias from intrinsic alignment with DESI Year 1 spectra

ABSTRACT We estimate the redshift-dependent, anisotropic clustering signal in the Dark Energy Spectroscopic Instrument (DESI) Year 1 Survey created by tidal alignments of Luminous Red Galaxies (LRGs) and a selection-induced galaxy orientation bias. To this end, we measured the correlation between LRG shapes and the tidal field with DESI’s Year 1 redshifts, as traced by LRGs and Emission-Line Galaxies. We also estimate the galaxy orientation bias of LRGs caused by DESI’s aperture-based selection, and find it to increase by a factor of seven between redshifts 0.4−1.1 due to redder, fainter galaxies falling closer to DESI’s imaging selection cuts. These effects combine to dampen measurements of the quadrupole of the correlation function (ξ2) caused by structure growth on scales of 10–80 h−1 Mpc by about 0.15 per cent for low redshifts (0.4 < z < 0.6) and 0.8 per cent for high (0.8 < z < 1.1), a significant fraction of DESI’s error budget. We provide estimates of the ξ2 signal created by intrinsic alignments that can be used to correct this effect, which is necessary to meet DESI’s forecasted precision on measuring the growth rate of structure. While imaging quality varies across DESI’s footprint, we find no significant difference in this effect between imaging regions in the Legacy Imaging Survey.

79 ASTRONOMY AND ASTROPHYSICS↗