SEARCH · Engineering Papers

Results for “Advanced nuclear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Rebuilding the space technology base

NASA's Civil Space Technology Initiative (CSTI) will not only develop novel technologies for space exploration and exploitation, but also take mature technologies into their demonstration phase in earth orbit. In the course of five years, CSTI will pay off in ground- and space-tested hardware, software, processes, methods for low-orbit transport and operation, and fundamental scientific research on the orbital environment. Attention is given to LOX/hydrogen and LOX/hydrocarbon reusable engines, liquid/solid fuel hybrid boosters, and aeroassist flight experiments for the validation of aerobraking with atmospheric friction. Also discussed are advanced scientific sensors, systems autonomy and telerobotics, control of flexible structures, precise segmented reflectors, high-rate high-capacity data handling, and advanced nuclear power systems.

Povinelli, Frederick P.↗

NASA NTRS1992

Some comments on turbulence modeling from an industrial perspective

In propulsion industry, computational techniques (namely computational fluid dynamics) are gradually becoming engineering design and analysis tools, especially in the case of high performance aircraft engines, high speed air breathing propulsion, rocket propulsion, and advanced nuclear propulsion and electric propulsion. The key issues in acceptance of CFD are turn around time, cost, and accuracy. The turn around time of analysis has to fit program schedules. Cost is still the bottom line, the value of CFD to the program should at least balance its cost. CFD can be used if it can be divided into two major parts: numerics and physical models.

Sindir, Munir M.↗

NASA NTRS1993

Innovative electric propulsion thruster modeling

The objective of this program is to model and evaluate advanced nuclear electric propulsion (NEP) system concepts as an aid to the performance of NEP mission benefits studies. The two primary goals are as follows: (1) provide scaling relationships for mass, power, and efficiency, as functions of Isp, propellant type, and other important quantities. The discussion is presented in vugraph form.

Frisbee, Robert H.↗

NASA NTRS1992

Space Congress, 29th, Cocoa Beach, FL, Apr. 21-24, 1992, Proceedings

The present volume on the quest for new frontiers in space discusses weather impacts on space operations, planning for the performance of future space bases, a new guidance and control unit for the Titan IV vehicle, and nondestructive evaluation of Shuttle Columbia tiles. Attention is given to Space Shuttle payload accommodations and trends in customer demands, a generic propellants transfer unit, making space part of general education, space station on-orbit solar array loads during assembly, and dimensional stability of the attitude reference assembly on SSF. Topics addressed include National Launch System payload accommodations and launch operations, the integrated factory/launch site processing concept, Pioneer 10 interstellar studies, and the role of advanced nuclear propulsion systems in precursor interstellar missions. Also discussed are legal challenges in realizing interstellar initiatives, Mars transportation system synthesis, and NASA's commercial space program.

Source record↗

NASA NTRS1993

Space Station technology testbed: 2010 deep space transport

A space station in a crew-tended or permanently crewed configuration will provide major R&D opportunities for innovative, technology and materials development and advanced space systems testing. A space station should be designed with the basic infrastructure elements required to grow into a major systems technology testbed. This space-based technology testbed can and should be used to support the development of technologies required to expand our utilization of near-Earth space, the Moon and the Earth-to-Jupiter region of the Solar System. Space station support of advanced technology and materials development will result in new techniques for high priority scientific research and the knowledge and R&D base needed for the development of major, new commercial product thrusts. To illustrate the technology testbed potential of a space station and to point the way to a bold, innovative approach to advanced space systems' development, a hypothetical deep space transport development and test plan is described. Key deep space transport R&D activities are described would lead to the readiness certification of an advanced, reusable interplanetary transport capable of supporting eight crewmembers or more. With the support of a focused and highly motivated, multi-agency ground R&D program, a deep space transport of this type could be assembled and tested by 2010. Key R&D activities on a space station would include: (1) experimental research investigating the microgravity assisted, restructuring of micro-engineered, materials (to develop and verify the in-space and in-situ 'tuning' of materials for use in debris and radiation shielding and other protective systems), (2) exposure of microengineered materials to the space environment for passive and operational performance tests (to develop in-situ maintenance and repair techniques and to support the development, enhancement, and implementation of protective systems, data and bio-processing systems, and virtual reality and telepresence/kinetic processes), (3) subsystem tests of advanced nuclear power, nuclear propulsion and communication systems (using boom extensions, remote station-keeping platforms and mobile EVA crew and robots), and (4) logistics support (crew and equipment) and command and control of deep space transport assembly, maintenance, and refueling (using a station-keeping platform).

Holt, Alan C.↗

DOE OSTI2020

Advanced Materials Program Summary

Materials solutions - enabling design, construction, and operation of licensable Advanced Nuclear Material, design, fabrication, installation, examination, testing, overpressure protection, inspection, stamping, and certification

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Modeling of the High Temperature Test Facility Using RELAP-7

The High Temperature Test Facility (HTTF) at Oregon State University (OSU) is an electrically heated, helium cooled, experimental facility. The HTTF was modeled using RELAP-7 in both 1-D and 3-D for validation. Due to core symmetry, 1/6th of the HTTF core was modeled in 3-D using the coupled heat conduction and forced convection capabilities of RELAP-7. This served as a validation case for RELAP-7 and its capabilities to model advanced nuclear technologies such as high temperature gas-cooled reactors.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Analyzing Foreign and Domestic Policy to Determine a Pathway to Achieving the US' NDC with a Focus on Advanced Reactors and Hydrogen

The United states in 2021 released a nationally determined contribution indicating goals to reach 50-52% reduction in CO2 emissions by 2030 compared with 2005 and to achieve zero carbon electricity by 2035. Current policy does not put us on course to achieve these goals, so we investigated policies that could form a pathway to achieve these goals in the US. We focused on the use of advanced nuclear reactors and hydrogen, but analyzed all relevant sectors to achieve our goals. This report also focuses on analyzing existing foreign policies and determining the most effective policies in each sectors. By combining the most effective policies from around the world in each sector, we find that we can set policies that form a pathway that is ambitious enough to meet the NDC goals.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Evaluating Scaling Effects of Steam Condensation Physics-based Model for Small Modular Reactor

This study focused on assessing condensation heat transfer (CHT) models for enhancing the passive safety of small modular reactors (SMRs). It also encompassed a review of the theoretical and semi-theoretical CHT models and correlations. Condensation models such as the degradation factor, heat and mass transfer analogy (HMTA), and boundary layer models are used to study advanced nuclear reactor PCCS. The previous CHT models were developed for small tube geometries, which differ from the containment of SMR. This study examined the scaled relations of a physics-based CHT model for analyzing laminar and turbulent film condensation downward flow conditions inside scaled tube geometries.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

Presentation: Evaluating scaling effects of steam condensation physics-based model for small modular reactors safety

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

A Summary of the Microstructural Characterization Results for the A709 Commercial Heats

To improve high temperature strength for advanced nuclear reactors, it is necessary to qualify additional structural materials for introduction into the American Society of Mechanical Engineers (AMSE) Boiler and Pressure Vessel Code (BPVC). Specifically, Alloy 709 was identified as a material for Sodium-cooled Fast Reactors to enhance time-dependent mechanical properties compared to 316H stainless steel, a code qualified high temperature alloy. Idaho National Laboratory (INL) and Oak Ridge National Laboratory (ORNL) performed initial microstructure and mechanical property testing on a third, commercial heat of Alloy 709 stainless steel. The Alloy 709 plate was produced by Allegheny Technology Inc. (ATI) and in the solution annealed condition. The chemical composition was within the limits for an American Society of Testing and Materials (ASTM) A213 specification for seamless tube for material UNS S31025. Grain size was measured as an average ASTM size of 6.5, which was larger than the ASTM 7 required according to ASTM A213 for seamless tube. The chemical composition was within the limits for an ASTM A213, and the room temperature tensile tests and hardness data met ASTM A213 specifications. Creep-fatigue results showed similar behavior to previous heats of Alloy 709.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

STAND Quickstart Guide

STAND is a flexible web application designed to identify and examine potentially feasible sites where advanced nuclear facilities might be welcomed by host communities. STAND allows the user to explore and provide insight on socioeconomic, proximity, and safety data, generate county reports, review regulatory data, and complete a comparative analysis across multiple sites by following several paths, either individually or sequentially based on the user’s needs and where they are in the deployment process. STAND is best used for the contiguous United States. STAND is not a substitute for the in-depth studies required to qualify a site for hosting a nuclear facility, nor is it a substitute for the necessary community engagement to build trust and seek consent. It can, however, be a valuable resource to aid in the siting process.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2023

STAND Quickstart Guide

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

MRS: Surveillance Test Article Development

The presentation covers work performed in FY23 on surveillance test article development. Surveillance test articles have been used of integrity assessment in light water reactor plants, this work seeks to develop a specimen that is passively loaded and could be used in advanced nuclear reactors for structural material health monitoring.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Reduction of the Waste Occupied Area by Nuclide Separation and Horizontal Emplacement of the Waste Packages - 20422

Two of the key objectives for realizing the advanced nuclear fuel cycle are to reduce the volume of high-level radioactive waste and to reduce the foot-print of the geological repository. To achieve these objectives, research and development on nuclide separation technologies is a prerequisite. In this context, it is necessary to consider the vitrification conditions and the design of the geological repository where separation technologies would be implemented to achieve effective reductions in the volume of vitrified waste and the foot-print of the geological repository. In this study, the effects of the vitrification conditions on the number of vitrified waste units and the disposal area were evaluated, based on the assumption that separation of Cs and Sr from the spent nuclear fuel had been performed. In addition, with reference to the design of the geological repository, the impact on the foot-print of the repository for different emplacement methods of the waste packages was examined. As a result, it was clarified that the waste-occupied area could be reduced by horizontal emplacement of the vitrified waste with low heat generation. In addition, it was demonstrated that a low waste-loaded vitrified waste contributed to a reduction in the foot-print of the geological repository in the case of horizontal emplacement, although the number of vitrified waste units increased. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Thermal Extraction and Delivery from Advanced Reactor Systems

This document presents preliminary thermodynamic analysis of thermal extraction and delivery from advanced nuclear reactors. Light-water, high temperature gas, sodium fast, and molten salt reactors are templated and analyzed for thermal extraction from nominal steam production conditions. Uncontrolled, controlled, and partial admission steam extraction methods are described and analyzed to show the differences in system impact from the various methods. Thermal delivery modeling results show comparisons that have become possible through the computational capabilities of the thermal delivery model. Due to the significant degrees of freedom of the problem, specific cases are used to compare the thermodynamic costs of heat transport using various heat transfer fluids. All this work is done using Modelica models, allowing for the future application of models in dynamic analyses beyond the steady-state calculations presented in this report. Appendices describe additional capabilities and methods that can help users analyze complex problems using HYBRID models developed in Modelica.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Applicability study of Bayesian optimization in core neutronic design using a toy model

At the Japan Atomic Energy Agency (JAEA), an innovative design approach named ARKADIA (Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant life cycle) for advanced nuclear reactors is currently under development. One task in ARKADIA is to build a system that automatically optimizes core and fuel designs by conducting core neutronic and thermal-hydraulic calculations, fuel integrity evaluations, and plant dynamic analyses. This system will be implemented to automatically find an optimal design that minimizes (or maximizes) objective function defined by core performance while varying the core and fuel design parameters such as fuel pin diameter, core height and diameter. In this study, as the first step of system development, we focused only on core neutronic design and conducted a study of automatic optimization. As the optimization algorithm, Bayesian optimization (BO), an effective method for optimization problems with expensive computational cost of objective function, was utilized. The applicability of BO was studied based on single- and two-objective optimization examples of core neutronic design in a toy model. As a result, in the former, it was shown that BO can give the optimal solution, which matches the reference solution calculated by a brute force calculation well, with a small number of required calculations. Usability on core neutronic designs, where the computational cost per case is high, was confirmed. In the latter, it was found that BO can give a Pareto solutions-set that shows good agreement with the reference solution. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Fluid Properties for MOOSE

The Multiphysics Object-Oriented Simulation Environment (MOOSE) enables a wide range of advanced nuclear reactor simulations. Under the guidance of MOOSE's Finite Volume Team, we worked on the fluid properties module. Significant contributions include enabling Tabulated Fluid Properties (TFP) for systems thermal hydraulics analysis, Temperature and Pressure functionalized Fluid Properties, and Lead & Lead-Bismuth properties. Along with improving the capabilities of the fluid properties module, we also improved the documentation to allow for future users and developers to understand how the module works.

97 MATHEMATICS AND COMPUTING↗