Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Cascade electrocatalysis via AgCu single-atom alloy and Ag nanoparticles in CO 2 electroreduction toward multicarbon products

Electrocatalytic CO 2 reduction into value-added multicarbon products offers a means to close the anthropogenic carbon cycle using renewable electricity. However, the unsatisfactory catalytic selectivity for multicarbon products severely hinders the practical application of this technology. In this paper, we report a cascade AgCu single-atom and nanoparticle electrocatalyst, in which Ag nanoparticles produce CO and AgCu single-atom alloys promote C-C coupling kinetics. As a result, a Faradaic efficiency (FE) of 94 ± 4% toward multicarbon products is achieved with the as-prepared AgCu single-atom and nanoparticle catalyst under ~720 mA cm -2 working current density at -0.65 V in a flow cell with alkaline electrolyte. Density functional theory calculations further demonstrate that the high multicarbon product selectivity results from cooperation between AgCu single-atom alloys and Ag nanoparticles, wherein the Ag single-atom doping of Cu nanoparticles increases the adsorption energy of *CO on Cu sites due to the asymmetric bonding of the Cu atom to the adjacent Ag atom with a compressive strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of an AgS2 Complex on Ag(110)

Adsorbed sulfur has been investigated on the Ag(110) surface at two different coverages, 0.02 and 0.25 monolayers. At the lower coverage, only sulfur adatoms are present. At the higher coverage, there are additional bright features which we identify as linear, independent AgS 2 complexes. Here, this identification is based upon density functional theory (DFT) and its comparison with experimental observations including bias dependence and separation between complexes. DFT also predicts the absence of AgS 2 complexes at low coverage, and the development of AgS 2 complexes around a coverage of 0.25 monolayers of sulfur, as is experimentally observed. To our knowledge, this is the first example of an isolated linear sulfur-metal-sulfur complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ study of defect migration kinetics in nanoporous Ag with enhanced radiation tolerance

Defect sinks, such as grain boundaries and phase boundaries, have been widely accepted to improve the irradiation resistance of metallic materials. However, free surface, an ideal defect sink, has received little attention in bulk materials as surface-to-volume ratio is typically low. Here by using in situ Kr ion irradiation technique in a transmission electron microscope, we show that nanoporous (NP) Ag has enhanced radiation tolerance. Besides direct evidence of free surface induced frequent removal of various types of defect clusters, we determined, for the first time, the global and instantaneous diffusivity of defect clusters in both coarse-grained (CG) and NP Ag. Opposite to conventional wisdom, both types of diffusivities are lower in NP Ag. Such a surprise is largely related to the reduced interaction energy between isolated defect clusters in NP Ag. Determination of kinetics of defect clusters is essential to understand and model their migration and clustering in irradiated materials.

NANOSCIENCE AND TECHNOLOGY↗

Metal-only Lewis pairs between group 10 metals and Tl( I ) or Ag( I ): insights into the electronic consequences of Z-type ligand binding

Complexes bearing electron rich transition metal centers, especially those displaying coordinative unsaturation, are well-suited to form reverse-dative σ-interactions with Lewis acids. Herein we demonstrate the generality of zerovalent, group 10 m -terphenyl isocyanide complexes to form reverse-dative σ-interactions to Tl( I ) and Ag( I ) centers. Structural and spectroscopic investigations of these metal-only Lewis pairs (MOLPs) has allowed insight into the electronic consequences of Lewis-acid ligation within the primary coordination sphere of a transition metal center. Treatment of the bis-isocyanide complex, Pt(CNAr Dipp2 ) 2 (Ar Dipp2 = 2,6-(2,6-(i-Pr) 2 C 6 H 3 ) 2 C 6 H 3 ) with TlOTf (OTf = [O 3 SCF 3 ] – ) yields the Pt/Tl MOLP [TlPt(CNAr Dipp2 ) 2 ]OTf ( 1 ). 1 H NMR and IR spectroscopic studies on 1 , and its Pd congener [TlPd(CNAr Dipp2 ) 2 ]OTf ( 2 ), demonstrate that the M → Tl interaction is labile in solution. However, treatment of complexes 1 and 2 with Na[BAr F 4 ] (Ar F = 3,5-(CF 3 ) 2 C 6 H 3 ) produces [TlPt(CNAr Dipp2 ) 2 ]BAr F 4 ( 3 ) and [TlPd(CNAr Dipp2 ) 2 ]BAr F 4 ( 4 ), in which Tl( I ) binding is shown to be static by IR spectroscopy and, in the case of 3 , 195 Pt NMR spectroscopy as well. This result provides strong evidence that the M → Tl linkages can be attributed primarily to σ-donation from the group 10 metal to Tl, as loss of ionic stabilization of Tl by the triflate anion is compensated for by increasing the degree of M → Tl σ-donation. In addition, X-ray Absorption Near-Edge Spectroscopy (XANES) on the Pd/Tl and Ni/Tl MOLPs, [TlPd(CNAr Dipp2 ) 2 ]OTf ( 2 ) and [TlNi(CNAr Mes2 ) 3 ]OTf, respectively, is used to illustrate that the formation of a reverse-dative σ-interaction with Tl( I ) does not alter the spectroscopic oxidation state of the group 10 metal. Also reported is the ability of M(CNAr Dipp2 ) 2 (M = Pt, Pd) to form MOLPs with Ag( I ), yielding the complexes [AgM(CNAr Dipp2 ) 2 ]OTf ( 5 , M = Pt; 6 , M = Pd). As was determined for the Tl-containing MOLPs 1–4 , it is shown that the spectroscopic oxidation states of the group 10 metal in 5 and 6 are essentially unchanged compared to the zerovalent precursors M(CNAr Dipp2 ) 2 . However, in the case of 5 and 6 , the formation of a dative M → Ag σ-bonding interaction facilitates the binding of Lewis bases to the group 10 metal trans to Ag, illustrating the potential of acceptor fragments to open up new coordination sites on transition metal complexes without formal, two-electron oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultralow thermal conductivity in diamondoid lattices: high thermoelectric performance in chalcopyrite Cu 0.8+y Ag 0.2 In 1–y Te 2

Because of its unique transport properties, CuInTe 2 has been considered as a promising p-type material for thermoelectric applications. However, its diamondoid structure gives it a high intrinsic lattice thermal conductivity that greatly limits its thermoelectric performance. In this study, we demonstrate that Ag alloying gives rise to an extremely low lattice thermal conductivity of 0.47 W m –1 K –1 for Cu 0.8 Ag 0.2 InTe 2 at 850 K. Moreover, we found Cu doping significantly improves the carrier mobility while simultaneously increasing the carrier concentraton. As a result, the power factor of Cu 0.8 Ag 0.2 InTe 2 increases and a maximum ZT of ~1.6 is achieved at 850 K. Both DFT calculations and low temperature heat capacity measurements suggest a strong interaction between low frequency optical phonons and heat carrying acoustic phonons, which is derived from the weak Ag–Te bonding. Here, this strong phonon coupling decreases the Debye temperature and induces a low sound velocity.

36 MATERIALS SCIENCE↗

Magnetic Rotation in {sup 106}Ag and Systematics of A{approx}110 Mass Region

The high spin states of {sup 106}Ag were populated via the fusion-evaporation reaction {sup 100}Mo({sup 11}B,5n){sup 106}Ag at a beam energy of 60 MeV. A new level scheme of {sup 106}Ag is built on basis of the present experiment. The positive parity band with the configuration of {pi}g{sub 9/2} x V[h{sub 11/2}{sup 2}(g{sub 7/2}/d{sub 5/2})] is discussed on the ground of shears mechanism. Theoretical calculation of the effective interaction performed by TAC model agrees well with the experimental value. Systematics study shows that Ag isotopes are probably at the boundary of magnetic rotation in A{approx}110 mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reversibly phototunable TiO{sub 2} photonic crystal modulated by Ag nanoparticles' oxidation/reduction

We report a reversibly phototunable photonic crystal system whose reflectance at the stop band position can be modulated by alternating UV/visible (UV/Vis) irradiation. The phototunable system consists of Ag nanoparticles and TiO{sub 2} photonic crystal. The stop bands intensity of Ag loaded TiO{sub 2} photonic crystals were found to be dependent on the redox states of Ag nanoparticles. The quasi 'on' and 'off' states of the stop band were reversibly modulated by the Ag nanoparticles' oxidation/reduction through alternating UV/Vis light irradiation.

36 MATERIALS SCIENCE↗

Detailed investigation of the influence of the process parameters on the nano-morphology of Ag deposited on SiC by radio-frequency sputtering

In this work, a detailed study of the influence of the synthesis parameters (deposition time t and emission current I) on the morphological properties of Ag nanoparticles sputter-deposited on silicon carbide is carried out. Using the atomic force microscopy technique, we analyzed the evolution of several structural characteristics as a function both of t and I: the length and width of the Ag nanoparticles, the number of nanoparticles per unit area, the nanoparticles' fraction of the covered area, and the roughness of the resulting Ag film. Using consolidated theoretical frameworks and fitting approaches, the relations between such quantities and the process parameters t and I were established. In particular, the application of the interrupted coalescence model allowed us to evaluate the critical mean island diameter for the partial coalescence process; the dynamic scaling theories of growing interfaces lead, instead, to the determination of the dynamic scaling, growth, and roughness exponents (the values of which suggest a conservative growth process of the islands in which the atomic surface diffusion plays a key role). Finally, the Avrami approach to the study of the evolution of the fraction of area covered by the Ag islands allowed us to evaluate the Avrami exponent.

36 MATERIALS SCIENCE↗

Spoof-like plasmonic behavior of plasma enhanced atomic layer deposition grown Ag thin films

The plasmonic behavior of Ag thin films produced by plasma enhanced atomic layer deposition (PEALD) has been investigated. We show that as-deposited flat PEALD Ag films exhibit unexpected plasmonic properties, and the plasmonic enhancement can differ markedly, depending on the microstructure of the Ag film. Electromagnetic field simulations indicate that this plasmonic behavior is due to air gaps that are an inherent property of the mosaic-like microstructure of the PEALD-grown Ag film, suggesting that this is a metamaterial with behavior very similar to what would be expected in spoof plasmonics where gaps are fabricated in films to create plasmonic-like resonances.

36 MATERIALS SCIENCE↗

Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials

Nanostructured Ag-Pb-Te thermoelectric materials were fabricated by unidirectionally solidifying the ternary Ag-Pb-Te eutectic and near-eutectic alloys using the Bridgeman method. Specially, the Bridgman-grown eutectic alloy exhibited a partially aligned lamellar microstructure, which consisted of Ag{sub 5}Te{sub 3} and Te phases, with additional 200-600 nm size particles of PbTe. The self-assembled interfaces altered the thermal and electronic transport properties in the bulk Ag-Pb-Te eutectic alloy. Presumably due to phonon scattering from the nanoscale microstructure, a low thermal conductivity ({kappa} = 0.3 W/mK) was achieved of the eutectic alloy, leading to a zT peak of 0.41 at 400 K.

36 MATERIALS SCIENCE↗

Phase constitution and interface structure of nano-sized Ag-Cu/AlN multilayers: Experiment and ab initio modeling

Nano-sized Ag-Cu{sub 8nm}/AlN{sub 10nm} multilayers were deposited by reactive DC sputtering on {alpha}-Al{sub 2}O{sub 3}(0001) substrates. Investigation of the phase constitution and interface structure of the multilayers evidences a phase separation of the alloy sublayers into nanosized grains of Ag and Cu. The interfaces between the Ag grains and the quasi-single-crystalline AlN sublayers are semi-coherent, whereas the corresponding Cu/AlN interfaces are incoherent. The orientation relationship between Ag and AlN is constant throughout the entire multilayer stack. These observations are consistent with atomistic models of the interfaces as obtained by ab initio calculations.

36 MATERIALS SCIENCE↗

Structural and optical properties of Ag-doped copper oxide thin films on polyethylene napthalate substrate prepared by low temperature microwave annealing

Silver doped cupric oxide thin films are prepared on polyethylene naphthalate (flexible polymer) substrates. Thin films Ag-doped CuO are deposited on the substrate by co-sputtering followed by microwave assisted oxidation of the metal films. The low temperature tolerance of the polymer substrates led to the search for innovative low temperature processing techniques. Cupric oxide is a p-type semiconductor with an indirect band gap and is used as selective absorption layer solar cells. X-ray diffraction identifies the CuO phases. Rutherford backscattering spectrometry measurements confirm the stoichiometry of each copper oxide formed. The surface morphology is determined by atomic force microscopy. The microstructural properties such as crystallite size and the microstrain for (-111) and (111) planes are calculated and discussed. Incorporation of Ag led to the lowering of band gap in CuO. Consequently, it is determined that Ag addition has a strong effect on the structural, morphological, surface, and optical properties of CuO grown on flexible substrates by microwave annealing. Tauc's plot is used to determine the optical band gap of CuO and Ag doped CuO films. The values of the indirect and direct band gap for CuO are found to be 2.02 eV and 3.19 eV, respectively.

36 MATERIALS SCIENCE↗

Composition dependence of the photochemical reduction of Ag{sup +} by as-grown Pb(Zr{sub x}Ti{sub 1−x})O{sub 3} films on indium tin oxide electrode

Photochemical growth of metal particles on ferroelectric films has usually been found to depend on polarization effect solely. This research exploits the interplay of the film/electrode interface barrier and depolarization field on the photoreduction of Ag{sup +} to Ag onto Pb(Zr,Ti)O{sub 3} (PZT) films deposited on indium tin oxide (ITO) electrodes. Ag nanoparticles are observed on the as-grown polycrystalline PZT films without poling, while the particle size and density are closely related to the concentration of Zr in PZT and the poling direction. The enhancement on the photoelectrochemical properties of the ITO/PZT photocathode by the decoration of Ag nanoparticles is finally demonstrated.

36 MATERIALS SCIENCE↗

Molecular-like Ag clusters sensitized near-infrared down-conversion luminescence in oxyfluoride glasses for broadband spectral modification

Molecular-like Ag clusters sized at 1–4 nm have been stabilized in Pb/Cd-free oxyfluoride glasses, showing broadband excitation/emission characteristics and unique wavelength-dependent luminescent performance with a maximal quantum yield of 26.9%. It was experimentally demonstrated that an energy transfer route of Ag clusters → Tb{sup 3+} → Yb{sup 3+} occurs in Ag{sup +}/Tb{sup 3+}/Yb{sup 3+} tri-doped sample, wherein Ag clusters act as sensitizers for near-infrared down-conversion spectral modification. Hopefully, the proposed strategy that noble metal clusters being applied for harvesting solar radiation may potentially solve the sticky problems of the narrow excitation bandwidth and the low excitation efficiency in rare earth ions doped down-conversion materials.

36 MATERIALS SCIENCE↗

The effect of strain induced by Ag underlayer on saturation magnetization of partially ordered Fe{sub 16}N{sub 2} thin films

Partially ordered Fe-N thin films were grown by a facing target sputtering process on the surface of a (001) Ag underlayer on MgO substrates. It was confirmed by x-ray diffraction that the Ag layer enlarged the in-plane lattice of the Fe-N thin films. Domains of the ordered α″-Fe{sub 16}N{sub 2} phase within an epitaxial (001) α′-Fe{sub x}N phase were identified by electron diffraction and high-resolution aberration-corrected scanning transmission electron microscopy (STEM) methods. STEM dark-field and bright-field images showed the fully ordered structure of the α″-Fe{sub 16}N{sub 2} at the atomic column level. High saturation magnetization(Ms) of 1890 emu/cc was obtained for α″-Fe{sub 16}N{sub 2} on the Ag underlayer, while only 1500 emu/cc was measured for Fe-N on the Fe underlayer. The results are likely due to a tensile strain induced in the α″-Fe{sub 16}N{sub 2} phase by the Ag structure at the interface.

36 MATERIALS SCIENCE↗

Ag{sub 2}O dependent up-conversion luminescence properties in Tm{sup 3+}/Er{sup 3+}/Yb{sup 3+} co-doped oxyfluorogermanate glasses

Up-conversion (UC) luminescence properties of Ag/Tm{sup 3+}/Er{sup 3+}/Yb{sup 3+} co-doped oxyfluorogermanate glasses have been studied to assess the effective role of silver nanoparticles as a sensitizer for Tm{sup 3+} and Er{sup 3+} ions. The X-ray diffraction patterns obtained in this work do not reveal any crystalline phase in the glass. However, the absorption spectra reveal that surface plasmons resonance band of Ag undergoes a distinct split with two maxima and a very broad absorption peak with a background that extends toward the near infrared (NIR) with the increasing of Ag{sub 2}O added concentration. Transmission electron microscope images confirm that silver nanoparticles have been precipitated from matrix glasses and show their distribution, size, and shapes. In addition, changes in UC luminescence intensity of four emission bands 476, 524, 546, and 658 nm corresponding to {sup 1}G{sub 4} → {sup 3}H{sub 6} (Tm{sup 3+}), ({sup 2}H{sub 11/2}, {sup 4}S{sub 3/2}) → {sup 4}I{sub 15/2} (Er{sup 3+}), and {sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} (Er{sup 3+}) transitions, respectively, as a function of silver addition to the base composition have been measured under 980 nm excitation. It is confirmed that Ag{sub 2}O added concentration plays an important role in increasing the UC luminescence intensity; however, further increase in Ag{sub 2}O added concentration reduces the intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size and alloying induced shift in core and valence bands of Pd-Ag and Pd-Cu nanoparticles

In this report, X-ray photoelectron spectroscopy studies have been carried out on Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles having identical sizes corresponding to mobility equivalent diameters of 60, 40, and 20 nm. The nanoparticles were prepared by the gas phase synthesis method. The effect of size on valence and core levels in metal and alloy nanoparticles has been studied by comparing the values to those with the 60 nm nanoparticles. The effect of alloying has been investigated by comparing the valence and core level binding energies of Pd-Cu and Pd-Ag alloy nanoparticles with the corresponding values for Pd, Ag, and Cu nanoparticles of identical sizes. These effects have been explained in terms of size induced lattice contractions, alloying induced charge transfer, and hybridization effects. The observation of alloying and size induced binding energy shifts in bimetallic nanoparticles is important from the point of view of hydrogen reactivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of hole injection and electroluminescence by ordered Ag nanodot array on indium tin oxide anode in organic light emitting diode

We report the enhancement of hole injection and electroluminescence (EL) in an organic light emitting diode (OLED) with an ordered Ag nanodot array on indium-tin-oxide (ITO) anode. Until now, most researches have focused on the improved performance of OLEDs by plasmonic effects of metal nanoparticles due to the difficulty in fabricating metal nanodot arrays. A well-ordered Ag nanodot array is fabricated on the ITO anode of OLED using the nanoporous alumina as an evaporation mask. The OLED device with Ag nanodot arrays on the ITO anode shows higher current density and EL enhancement than the one without any nano-structure. These results suggest that the Ag nanodot array with the plasmonic effect has potential as one of attractive approaches to enhance the hole injection and EL in the application of the OLEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗