Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Mechanisms and stability of Li dynamics in amorphous Li-Ti-P-S-based mixed ionic–electronic conductors: A machine learning molecular dynamics study

Mixed ionic–electronic conductors (MIECs) exhibit both high ionic and electronic conductivity to improve the battery performance. In this work, we investigate the mechanism and stability of transport channels in our recently developed MIEC material, amorphous Ti-doped lithium phosphorus sulfide (LPS), using molecular dynamics (MD) simulations with a 99% accurate machine-learning force field (MLFF) trained on ab initio MD data. The achieved MLFF helps efficient large-scale MD simulations on LPS with three Ti concentrations (10%, 20%, and 30%) and six temperatures (25°C to 225°C) to calculate ionic conductivity, activation energy, Li-ion transport mechanism, and configurational entropy. Results show that ionic conductivities and activation energies are consistent with our recent experimental values. Moreover, Li-ion transport occurs via free-volume diffusion facilitated by the formation of disordered Li-S polyhedra. The enhanced stability of transport channels at 10% and 20% Ti doping, compared to 0% and 30%, is observed by analyzing the vibrational and configurational entropy of these disordered Li-S polyhedra. Overall, this study highlights the utility of MLFF-based large-scale MD simulations in explaining the transport mechanism and the stability of Li-ion in Ti-doped LPS electrolyte with significant computational efficiency.

And configuration entropy↗

TGA Study of the Reaction Kinetics of a CuFeMnAlO 4+δ Oxygen Carrier for Methane Chemical Looping Combustion under High Pressure and Atmospheric Pressure Conditions

Reduction and oxidation kinetics of a CuFeMnAlO 4+δ oxygen carrier for methane were studied using an atmospheric thermogravimetric analyzer (TGA) and a pressurized TGA. Important parameters such as temperature (500–900 °C), particle size distribution (150–650 μm), and partial pressures of reactants (methane and oxygen) were evaluated. Results showed that the reduction of the oxygen carrier was not affected by particle size distribution studied in this work, and that above 750 °C, the effect of the temperature on oxygen carrier reduction started to diminish. The reaction time approaches an asymptotic limit as methane partial pressure increases. For oxygen carrier oxidation, it was found that the rate of oxidation increased with increasing oxygen concentration. The effect of the oxygen concentration was more noticeable when the oxygen concentration was below 7.5%. Because of the inherent feature of the oxygen carrier, its chemical looping with oxygen uncoupling property was also assessed. A phase boundary-controlled shrinking sphere model was used to model the test data from the TGAs. Modeling results showed that the oxygen carrier reduction had a reaction order of 1 with an activation energy of ∼46 kJ/mol. Oxygen carrier oxidation demonstrated a reaction order of 1.1 with an activation energy of ∼55 kJ/mol. Additionally, the differences of the experimental results between the atmospheric pressure TGA and the pressurized TGA were discussed in detail and the limitations of the pressurized TGA were highlighted.

Hydrocarbons↗

Autoignition characteristics of aircraft-type fuels

The ignition delay characteristics of Jet A, JP 4, no. 2 diesel, cetane and an experimental referee broad specification (ERBS) fuel in air at inlet temperatures up to 1000 K, pressures of 10, 15, 20, 25 and 30 atm, and fuel air equivalence ratios of 0.3, 0.5, 0.7 and 1.0 were mapped. Ignition delay times in the range of 1 to 50 msec at freestream flow velocities ranging from 20 to 100 m/sec were obtained using a continuous flow test apparatus which permitted independent variation and evaluation of the effect of temperature, pressure, flow rate, and fuel/air ratio. The ignition delay times for all fuels tested appeared to correlate with the inverse of pressure and the inverse exponent of temperature. With the exception of pure cetane, which had the shortest ignition delay times, the differences between the fuels tested did not appear to be significant. The apparent global activation energies for the typical gas turbine fuels ranged from 38 to 40 kcal/mole, while the activation energy determined for cetane was 50 kcal/mole. In addition, the data indicate that for lean mixtures, ignition delay times decrease with increasing equivalence ratio. It was also noted that physical (apparatus dependent) phenomena, such as mixing (i.e., length and number of injection sites) and airstream cooling (due to fuel heating, vaporization and convective heat loss) can have an important effect on the ignition delay.

Spadaccini, L. J.↗

Oxidation and embrittlement of Ti-6Al-2Sn-4Zr-2Mo alloy

A thermogravimetric analysis monitoring study has been conducted for Ti-6Al-2Sn-4Zr-2Mo in the 593-760 C range, with a view to its total oxidation kinetics in laboratory air. In addition, tensile elongation was obtained for selected foil specimens after their exposure to simulated Space Shuttle reentry conditions. The total weight gain with time exhibited two parabolic stages separated by a transient region which is the result of a simultaneous increase in the parabolic growth rate constant for the oxide and in oxygen solubility at the oxide-metal interface. A model for the total oxidation kinetics accounting for the two individual components (oxide growth and solid solution formation) is proposed; the activation energy for oxygen diffusion in the alpha-solid solution is shown to approximate the activation energy for the degradation of tensile elongation of the alloy in its foil gage condition.

Shenoy, R. N.↗

Electrical conductivity studies of Bi{sub 2}O{sub 3}-Li{sub 2}O-ZnO-B{sub 2}O{sub 3} glasses

Highlights: Black-Right-Pointing-Pointer Ac conductivity measurements and its analysis has been performed on Bi{sub 2}O{sub 3}-Li{sub 2}O-ZnO-B{sub 2}O{sub 3} glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. Black-Right-Pointing-Pointer The dc conductivity increased and the activation energy decreased with lithium content. Black-Right-Pointing-Pointer The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. Black-Right-Pointing-Pointer The onset of conductivity relaxation shifts towards higher frequencies with temperature. Black-Right-Pointing-Pointer The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature. -- Abstract: Ac conductivity measurements and its analysis has been performed on xBi{sub 2}O{sub 3}-(65-x)Li{sub 2}O-20ZnO-15B{sub 2}O{sub 3} (0 {<=} x {<=} 20) glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. The dc conductivity increased and the activation energy decreased with lithium content. The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. The onset of conductivity relaxation shifts towards higher frequencies with temperature. The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature.

36 MATERIALS SCIENCE↗

An investigation on the influence of milling time and calcination temperature on the characterization of nano cerium oxide powder synthesized by mechanochemical route

Highlights: ► Synthesis of nanosized CeO{sub 2} was carried out using mechanochemical reactions plus sequential calcinations procedure. ► The effect of milling time and calcinations procedure on crystallite size and surface area of the as-synthesized powders was investigated. ► The extended milling times were exposed to result in the smaller crystallite size, and hence higher surface area for the as-synthesized powder. ► Higher calcinations temperatures, on the other hand, led to the as-synthesized powder with a larger crystallite size and therefore, lower surface area. ► Activation energy for nanocrystallite growth was calculated during the calcinations procedure and the aforementioned crystallite growth was found to be conducted in the light of interfacial reactions. -- Abstract: The synthesis of nano-sized CeO{sub 2} powder was investigated via mechanochemical reactions between hydrate cerium chloride and sodium hydroxide as the starting materials. The process was followed by a subsequent calcination procedure. Characterization of as-synthesized powder was performed using X-ray diffraction, FTIR spectroscopy, Brunner–Emmett–Teller (BET) nitrogen gas absorption, scanning electron microscopy (SEM) and particle size analyzer (PSA). The precursors were milled for different milling times and then were subjected to different heat treatment procedure at variable temperatures from 100 to 700 °C. According to the results, milling time and calcination temperatures induce paramountal effects on crystallite size and surface area of as-synthesized powders. In addition, the average activation energy for the growth of nanocrystals during calcination was determined to be about 12.53 kJ/mol, suggesting the influence of interfacial reactions on the crystallite growth during the calcination procedure.

36 MATERIALS SCIENCE↗

Diffusion of Mn in GaAs studied by quantitative time-of-flight secondary ion mass spectrometry

Diffusion coefficients and the activation energy for Mn diffusion in ion-implanted and layered epitaxial structures of Ga{sub 1-x}Mn{sub x}As/GaAs are reported from quantitative time-of-flight secondary ion mass spectrometry. Samples are annealed between the growth temperature (as low as 200 deg. C) and approximately 400 deg. C. This temperature range is reported to improve the Curie temperature, which is important for the spintronic applications of these materials. Quantitative diffusion information is obtained by calibrating the Mn concentration to ion-implanted standards and the depth scale to profilometry measurements. Depth profiles obtained for ion-implanted Mn in GaAs at a dose of 1.35x10{sup 15} atoms/cm{sup 2} show increased Mn concentration within the top 5 nm of the sample but otherwise reveal no significant differences in the implantation shape after annealing up to 350 deg. C. For a higher implantation dose of 8.10x10{sup 15} Mn atoms/cm{sup 2}, diffusion is initiated after annealing at 300 deg. C with more significant diffusion at higher temperatures. The analysis of annealed epitaxial films of even higher concentration (Ga{sub 0.89}Mn{sub 0.11}As) exhibits diffusion at all temperatures measured (200-400 deg. C) and an activation energy of 0.67+-0.09 eV is calculated by fitting the profiles to an error function.

36 MATERIALS SCIENCE↗

Interdiffusion in nanometric Fe/Ni multilayer films

[Fe (3.1 nm)/Ni (3.3 nm)]{sub 20} multilayer films were prepared by DC magnetron sputtering onto oxidized Si(100) substrates. The Fe and Ni layers were shown to both be face-centered cubic by x-ray diffraction. Interdiffusion of the Fe and Ni layers in the temperature range of 300–430 °C was studied by x-ray reflectivity. From the decay of the integral intensity of the superlattice peak, the activation energy and the pre-exponential term for the effective interdiffusion coefficient were determined as to 1.06 ± 0.07 eV and 5 × 10{sup −10} cm{sup 2}/s, respectively. The relevance of the measured interdiffusion coefficient to the laboratory timescale synthesis of L1{sub 0} ordered FeNi as a rare-earth free permanent magnet is discussed.

36 MATERIALS SCIENCE↗

Nuclear magnetic resonance study of Li and H diffusion in the high-temperature solid phase of LiBH{sub 4}

In order to study the atomic jump motions in the high-temperature solid phase of LiBH{sub 4}, we have measured the {sup 1}H and {sup 11}B nuclear magnetic resonance (NMR) spectra and the {sup 1}H, {sup 7}Li and {sup 11}B spin-lattice relaxation rates in this compound over the resonance frequency range of 14-34.4 MHz. In the temperature range 384-500 K, all the spin-lattice relaxation data are satisfactorily described in terms of a thermally activated jump motion of Li ions with the pre-exponential factor tau{sub 0}=1.1x10{sup -15} s and the activation energy E{sub a}=0.56 eV. The observed frequency dependences of the spin-lattice relaxation rates in this temperature range exclude a presence of any distributions of the Li jump rate or any other jump processes on the frequency scale of 10{sup 7}-10{sup 10} s{sup -1}. The strong narrowing of the {sup 1}H and {sup 11}B NMR lines above 440 K is consistent with the onset of diffusive motion of the BH{sub 4} tetrahedra. - Graphical abstract: The measured spin-lattice relaxation rates of {sup 1}H (a), {sup 7}Li (b) and {sup 11}B (c) as functions of the inverse temperature for the high-temperature solid phase of LiBH{sub 4}. The curves show the simultaneous Bloembergen-Purcell-Pound fits to the data with the fixed parameters of Li diffusion (the pre-exponential factor tau{sub 0}=1.1x10{sup -15} s and the activation energy E{sub a}=0.56 eV). This plot indicates that all the relaxation data for different nuclei and at different resonance frequencies are governed by a single Li jump process. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Degradation in Photovoltaic Encapsulant Transmittance: Results of the Second PVQAT TG5 Artificial Weathering Study

The optical degradation of encapsulants from ultraviolet (UV) radiation has historically resulted in a significant loss in performance throughout the life of a photovoltaic (PV) module. International Electrotechnical Commission (IEC) test methods have recently been developed to screen for PV encapsulants prone to loss in optical performance. The present study was performed to benchmark polymeric packaging materials relative to IEC 62788-1-4 (covering the measurement of optical transmittance) and IEC 62788-1-7 (on the durability of transmittance), provide feedback toward improvement of the methods, and develop insight regarding optical degradation. Contemporary materials were examined, including poly(ethylene-co-vinyl acetate) (EVA), thermoplastic polyolefin (TPO), polyolefin elastomer (POE), and polyvinyl butyral (PVB) encapsulants; a poly(ethene-co-tetrafluoroethene)/poly(ethylene terephthalate) (ETFE/PET) transparent backsheet; and a polystyrene (PS) working reference material. The use of silica-, specialty-, and rolled-glass was also compared in laminated coupons. Specimen size was separately examined from 2.5 to 12.5 cm. Weathering was performed with a xenon source, using IEC TS 62788-7-2 methods A2, A3, A4, and A5 (chamber temperature of 55 degrees C, 65 degrees C, 75 degrees C, or 85 degrees C), respectively. Characterizations were made using a UV-visible-near-infrared (UV-VIS-NIR) spectrophotometer (transmittance and reflectance, with and without an integrating sphere), a UV-VIS fluorescence spectrophotometer, a camera, and an optical microscope. Performance was analyzed, including solar weighted transmittance, yellowness index, UV cut-off wavelength, and haze (scattering). Separate Arrhenius analyses were performed to assess retention of transmittance and changes in yellowness index. The activation energy for both characteristics was found to range from 15-80 kJ mol-1, with an average of 48 kJ mol-1, similar to the average of 45 kJ mol-1 identified in the previous international PV Quality Assurance Task Force (PVQAT) Task Group 5 (TG5) study of more traditional encapsulants. The separate degradation modes of discoloration and scattering were distinguished in the encapsulants using a comprehensive spectral characterization. Based on these results, the IEC 62788-1-7 pass/fail criteria of 5% change in transmittance was confirmed to identify a known bad encapsulant.

durability↗

Hydrogen interaction kinetics of Ge dangling bonds at the Si{sub 0.25}Ge{sub 0.75}/SiO{sub 2} interface

The hydrogen interaction kinetics of the GeP{sub b1} defect, previously identified by electron spin resonance (ESR) as an interfacial Ge dangling bond (DB) defect occurring in densities ∼7 × 10{sup 12} cm{sup −2} at the SiGe/SiO{sub 2} interfaces of condensation grown (100)Si/a-SiO{sub 2}/Ge{sub 0.75}Si{sub 0.25}/a-SiO{sub 2} structures, has been studied as function of temperature. This has been carried out, both in the isothermal and isochronal mode, through defect monitoring by capacitance-voltage measurements in conjunction with ESR probing, where it has previously been demonstrated the defects to operate as negative charge traps. The work entails a full interaction cycle study, comprised of analysis of both defect passivation (pictured as GeP{sub b1}-H formation) in molecular hydrogen (∼1 atm) and reactivation (GeP{sub b1}-H dissociation) in vacuum. It is found that both processes can be suitably described separately by the generalized simple thermal (GST) model, embodying a first order interaction kinetics description based on the basic chemical reactions GeP{sub b1} + H{sub 2} → GeP{sub b1}H + H and GeP{sub b1}H → GeP{sub b1} + H, which are found to be characterized by the average activation energies E{sub f} = 1.44 ± 0.04 eV and E{sub d} = 2.23 ± 0.04 eV, and attendant, assumedly Gaussian, spreads σE{sub f} = 0.20 ± 0.02 eV and σE{sub d} = 0.15 ± 0.02 eV, respectively. The substantial spreads refer to enhanced interfacial disorder. Combination of the separately inferred kinetic parameters for passivation and dissociation results in the unified realistic GST description that incorporates the simultaneous competing action of passivation and dissociation, and which is found to excellently account for the full cycle data. For process times t{sub a} ∼ 35 min, it is found that even for the optimum treatment temperature ∼380 °C, only ∼60% of the GeP{sub b1} system can be electrically silenced, still far remote from device grade level. This ineffectiveness is concluded, for the major part, to be a direct consequence of the excessive spreads in the activation energies, ∼2–3 times larger than for the Si DB P{sub b} defects at the standard thermal (111)Si/SiO{sub 2} interface which may be easily passivated to device grade levels, strengthened by the reduced difference between the average E{sub f} and E{sub d} values. Exploring the guidelines of the GST model indicates that passivation can be improved by decreasing T{sub an} and attendant enlarging of t{sub a}, however, at best still leaving ∼2% defects unpassivated even for unrealistically extended anneal times. The average dissociation energy E{sub d} ∼ 2.23 eV, concluded as representing the GeP{sub b1}-H bond strength, is found to be smaller than the SiP{sub b}-H one, characterized by E{sub d} ∼ 2.83 eV. An energy deficiency is encountered regarding the energy sum rule inherent to the GST-model, the origin of which is substantiated to lie with a more complex nature of the forward passivation process than basically depicted in the GST model. The results are discussed within the context of theoretical considerations on the passivation of interfacial Ge DBs by hydrogen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving p-type doping efficiency in Al{sub 0.83}Ga{sub 0.17}N alloy substituted by nanoscale (AlN){sub 5}/(GaN){sub 1} superlattice with Mg{sub Ga}-O{sub N} δ-codoping: Role of O-atom in GaN monolayer

We calculate Mg-acceptor activation energy E{sub A} and investigate the influence of O-atom, occupied the Mg nearest-neighbor, on E{sub A} in nanoscale (AlN){sub 5}/(GaN){sub 1} superlattice (SL), a substitution for Al{sub 0.83}Ga{sub 0.17}N disorder alloy, using first-principles calculations. We find that the N-atom bonded with Ga-atom is more easily substituted by O-atom and nMg{sub Ga}-O{sub N} (n = 1-3) complexes are favorable and stable in the SL. The O-atom plays a dominant role in reducing E{sub A}. The shorter the Mg-O bond is, the smaller the E{sub A} is. The Mg-acceptor activation energy can be reduced significantly by nMg{sub Ga}-O{sub N} δ-codoping. Our calculated E{sub A} for 2Mg{sub Ga}-O{sub N} is 0.21 eV, and can be further reduced to 0.13 eV for 3Mg{sub Ga}-O{sub N}, which results in a high hole concentration in the order of 10{sup 20} cm{sup −3} at room temperature in (AlN){sub 5}/(GaN){sub 1} SL. Our results prove that nMg{sub Ga}-O{sub N} (n = 2,3) δ-codoping in AlN/GaN SL with ultrathin GaN-layer is an effective way to improve p-type doping efficiency in Al-rich AlGaN.

36 MATERIALS SCIENCE↗

The effects of filamentary Ni, graphene and lithium amide (LiNH2) additives on the dehydrogenation behavior of mechano-chemically synthesized crystalline manganese borohydride (Mn(BH4)2) and its solvent filtration/extraction

Highlights: • Effect of graphene, filamentary Ni and LiNH{sub 2} on the synthesis of Mn(BH{sub 4}){sub 2} investigated. • Mechanical dehydrogenation observed for filamentary Ni and LiNH{sub 2} but not for graphene. • All additives suppressed the release of B{sub 2}H{sub 6} during thermal decomposition of Mn(BH{sub 4}){sub 2} with filamentary Ni being the strongest suppressor. • The LiNH{sub 2} additive reduced the apparent activation energy for dehydrogenation to 44.9 ± 4.3 kJ/mol. • After solvent filtration and extraction of the (Mn(BH{sub 4}){sub 2}/LiCl) sample, a dimetallic hydride [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] was found. - Abstract: Dehydrogenation properties of mechano-chemically synthesized crystalline Mn(BH{sub 4}){sub 2} hydride without and with ultrafine filamentary carbonyl nickel (Ni), graphene and LiNH{sub 2} were investigated. It is reported for the first time that all additives suppressed the release of B{sub 2}H{sub 6} with the filamentary Ni additive being the most effective suppressor of B{sub 2}H{sub 6}. In DSC, the decomposition peak of Mn(BH{sub 4}){sub 2} was endothermic. The estimated apparent activation energy for isothermal dehydrogenation was dramatically reduced to 44.9 ± 4.3 kJ/mol for the 5 wt.% LiNH{sub 2} additive from about 76–81 kJ/mol range for the additive-free sample and 5 wt.% filamentary Ni and graphene additives. The most striking finding, that has never been reported in the literature, is that the process of solvent filtration and extraction of the mechano-chemically synthesized (Mn(BH{sub 4}){sub 2}/LiCl) sample, resulted in the crystallization of a dimetallic borohydride solvate [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] instead of crystalline Mn(BH{sub 4}){sub 2}. Its dehydrogenation behavior was investigated isothermally and by TGA/DSC.

36 MATERIALS SCIENCE↗

A comparative study of the transformation kinetics of recrystallization texture of CC and DC 3003 aluminum alloys

Highlights: • Recrystallization texture evolution in CC and DC 3003 aluminum alloys was investigated. • A huge difference in recrystallization texture exists between CC and DC AA 3003 alloys. • Concurrent precipitation enhanced the recrystallization activation energy of CC AA 3003 alloy. - Abstract: The evolution of recrystallization texture in cold-rolled CC and DC AA 3003 aluminum alloys was investigated by X-ray diffraction. The results show that a significant difference in recrystallization texture exists between the CC and DC AA 3003 alloys due to the effect of concurrent precipitation. For the CC AA 3003 alloy, low-temperature annealing of cold-rolled sheets results in very strong M and P recrystallization textures. The strength of the M and P recrystallization textures decrease significantly with increasing annealing temperature. For the DC AA 3003 alloy, the recrystallization texture consists of a major cube component and two minor R and Goss components after annealing at low temperatures. The cube, R and Goss recrystallization textures weaken with increasing annealing temperature. The transformation kinetics of recrystallization texture during isothermal annealing can be well described by the JMAK equation. For the CC AA 3003 alloy the n value decreases from about 2.9 to about 0.8 as the annealing temperature increases from 371 °C to 427 °C, while the n value is around 1.5 for the DC AA 3003 alloy. The apparent activation energy for recrystallization of the cold-rolled CC AA 3003 alloy is significantly higher than that of the cold-rolled DC AA 3003 alloy.

36 MATERIALS SCIENCE↗

Mechanical properties, deformation behavior and microstructure evolution of Ti-43Al-6Nb-1Mo-1Cr alloys

Highlights: • The alloys exhibit excellent high-temperature tensile properties. • Activation energy of deformation (Q) and n are 571 KJ/mol and 2.765, respectively. • The hot processing maps of strain 0.5 and 0.6 are displayed. • Phase transformations and microstructure evolution are explained in different conditions. • Three types of deformation mechanisms are exhibited at different temperature. - Abstract: The high-temperature properties, microstructure evolution and deformation behavior of a novel Ti-43Al-6Nb-1Mo-1Cr(at.%) alloy were studied in this paper. The ultimate tensile strength (UTS) and elongation (δ) were tested at 800, 850, and 900 °C, in which the excellent strength 551 MPa, 510 MPa, and 382 MPa, and elongation 2.9%, 12.7%, and 16.8% were exhibited, respectively. Isothermal compression tests were carried out in the temperature range of 1100–1250 °C and strain rate range of 0.001–1.0 s{sup − 1}. Based on dynamic materials model (DMM) and phase diagram, dynamic recrystallization mechanism and phase transformation during thermal deformation were clarified and the hot processing maps were calculated. The experimental results show that the values of stress exponent (n) and the apparent deformation activation energy (Q) of Ti-43Al-6Nb-1Mo-1Cr(at.%) were calculated to be 2.77 and 571 KJ/mol. Meanwhile, three various types of microstructure evolution in different deformation conditions were discussed and concluded.

36 MATERIALS SCIENCE↗

LiBi{sub 3}S{sub 5}—A lithium bismuth sulfide with strong cation disorder

Among chalcogenide semiconductors for thermoelectric applications, alkali-metal bismuth compounds occur in many complex compositions favorable for high performance. Although LiBi{sub 3}S{sub 5} had been announced in 1977, the potential 1D lithium-ion conductor has hitherto eluded selective synthesis and structure determination. In this study, we present a solid-state route to phase-pure LiBi{sub 3}S{sub 5} powder starting from LiBiS{sub 2} and Bi{sub 2}S{sub 3}. Neutron diffractograms and lithium NMR spectra reveal its crystal structure to be a cation-disordered variety of the AgBi{sub 3}S{sub 5} type (synthetic pavonite; monoclinic, C2/m). Topological analyses and lithium NMR relaxometry suggest that correlated lithium-ion diffusion with activation energies up to 0.66(2) eV occurs along the channels in b direction including tetrahedral voids. Because of cation disorder, immobile bismuth(III) ions clog these pathways, making LiBi{sub 3}S{sub 5} a moderate to poor ionic conductor. The synthesis route reported is nonetheless promising for new lithium bismuth sulfides with, possibly ordered, structure types of the pavonite homologous series. - Graphical abstract: Phase-pure LiBi{sub 3}S{sub 5} has been synthesized and shown to crystallize in cation-disordered variety of the AgBi{sub 3}S{sub 5} type (synthetic pavonite, C2/m) using neutron diffractometry. Topological analyses and NMR relaxometry suggest that immobile Bi{sup 3+} ions clog migration channels along b, making the material a poor lithium conductor. Display Omitted - Highlights: • Phase-pure LiBi{sub 3}S{sub 5} has been synthesized using a promising solid-state route. • LiBi{sub 3}S{sub 5} crystallizes in a cation-disordered variant of the AgBi{sub 3}S{sub 5} type. • Topological analyses suggest lithium diffusion in channels along b. • NMR relaxometry finds activation energies of diffusion as high as 0.66(2) eV. • Because of disorder, LiBi{sub 3}S{sub 5} is a moderate to poor lithium-ion conductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy-efficient Mott activation neuron for full-hardware implementation of neural networks

To circumvent the von Neumann bottleneck, substantial progress has been made towards in-memory computing with synaptic devices. However, compact nanodevices implementing non-linear activation functions are required for efficient full-hardware implementation of deep neural networks. Here, in this work, we present an energy-efficient and compact Mott activation neuron based on vanadium dioxide and its successful integration with a conductive bridge random access memory (CBRAM) crossbar array in hardware. The Mott activation neuron implements the rectified linear unit function in the analogue domain. The neuron devices consume substantially less energy and occupy two orders of magnitude smaller area than those of analogue complementary metal–oxide semiconductor implementations. The LeNet-5 network with Mott activation neurons achieves 98.38% accuracy on the MNIST dataset, close to the ideal software accuracy. We perform large-scale image edge detection using the Mott activation neurons integrated with a CBRAM crossbar array. Our findings provide a solution towards large-scale, highly parallel and energy-efficient in-memory computing systems for neural networks.

electrical and electronic engineering↗

Sol–gel synthesis and lithium ion conduction properties of garnet-type Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}

Graphical abstract: Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}, prepared by sol–gel synthesis method, shows a total Li-ion conductivity of 1.69 × 10{sup −5} S/cm at 298 K and an activation energy is 0.40 eV. Highlights: ► Garnet-type fast ion conductor LLBTO was synthesized by modified sol–gel Pechini method. ► The synthesis temperature is significantly lower (200 K) than conventional solid state synthesis methods. ► The ionic conductivity of sol–gel synthesized LLBTO is 1.69 × 10{sup −5} S/cm. -- Abstract: High lithium ion conductive garnet-type barium lanthanum lithium tantalate, Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12} (LLBTO), was prepared by a modified sol–gel Pechini method from the appropriate mixtures of lithium carbonate, lanthanum oxide, barium carbonate and tantalum ethoxide. The thermal decomposition of the precursor powder was investigated by TG/DTA analysis. The LLBTO precursor powders were annealed at various temperatures between 923 and 1123 K for 6 h in air. The transformation process from precursor powder to crystalline garnet-like phase was analyzed by X-ray powder diffraction (XRPD). The morphology of the powders annealed at various temperatures was investigated by scanning electron microscopy (SEM). The resultant pelletized Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}, prepared by sol–gel synthesis method, shows a total Li-ion conductivity of 1.69 × 10{sup −5} S/cm at 298 K and an activation energy is 0.40 eV. The ionic conductivities reported in this study are slightly higher than those reported for LLBTO sample synthesized by conventional solid state synthesis route.

36 MATERIALS SCIENCE↗