Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “7”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Preparation and properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} (0.17≤x≤0.66) and its Cu-doping effect

In recent years, the materials in the B–Mg–Ni system have been intensively studied due to their excellent properties of hydrogen storage and superconductivity. Solving the crystal structure of phases in this system will facilitate an understanding of the mechanism of their physical properties. In this study, we report the preparation, crystal structure and physical properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} in the B–Mg–Ni system. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase was prepared by solid-state reactions at 1073 K and its crystal structure was determined and refined using X-ray powder diffraction data. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase crystallizes in the Ca{sub 3}Ni{sub 7}B{sub 2} structure type (space group R-3m, no. 166) with a=4.9496(3)–5.0105(6) Å, c=20.480(1)–20.581(1) Å depending on the x value, where x varies from 0.17 to 0.66. Two samples with nominal compositions Mg{sub 10}Ni{sub 20}B{sub 6} and Mg{sub 12}Ni{sub 18}B{sub 6} were characterized by magnetization and electric resistivity measurements in the temperature range from 5 K to room temperature. Both samples exhibited metallic behavior and showed spin-glass-like behavior with a spin freezing temperature (T{sub f}) around 33 K. A study of the Cu-doping effect showed that limited Cu content can be doped into the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} compound and T{sub f} decreases as the Cu content increases. - Graphical abstract: The crystal structure of the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase. - Highlights: • The crystal structure and solid solution range of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were revealed. • The magnetization and electrical resistivity of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were studied. • The Cu-doping effect of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} was investigated.

36 MATERIALS SCIENCE↗

Magnéli phases Ti{sub 4}O{sub 7} and Ti{sub 8}O{sub 15} and their carbon nanocomposites via the thermal decomposition-precursor route

A new synthetic approach for producing nano-powders of the Magnéli phases Ti{sub 4}O{sub 7}, Ti{sub 8}O{sub 15} and their carbon nanocomposites by thermal decomposition-precursor route is proposed. The formation mechanism of the single-phase carbon nanocomposites (Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C) from metal–organic precursors is studied using FT-IR, elemental analysis, TG, STA-MS and others. The synthesis parameters and conditions were optimized to prepare the target oxides with the desired microstructure and physical properties. The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. These nano-materials are n-type semiconductors with relatively low thermal conductivity in contrast to the bulk species. The nanostructured carbon nanocomposites of Magnéli phases achieve a low thermal conductivity close to 1 W/m K at RT. The maximum ZT{sub 570} {sub °C} values are 0.04 for Ti{sub 4}O{sub 7}/C powder nanocomposite and 0.01 for Ti{sub 8}O{sub 15}/C bulk nanocomposite. - Graphical abstract: From the precursor to the produced titanium oxide pellet and its microstructure (SEM, TEM micrographs) as well as results of phase and thermoelectric analyses. - Highlights: • Magnéli phases Ti{sub 4}O{sub 7}/Ti{sub 8}O{sub 15} via thermal decomposition-precursor route is proposed. • The formation mechanism of the nanocomposites Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • Microstructure of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are examined. • The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • The maximum figure of mertit ZT{sub 570} {sub °C} of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are 0.01 and 0.04.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal properties and phase transition in the fluoride, (NH{sub 4}){sub 3}SnF{sub 7}

Calorimetric, dilatometric and differential thermal analysis studies were performed on (NH{sub 4}){sub 3}SnF{sub 7} for a wide range of temperatures and pressures. Large entropy (δS{sub 0}=22 J/mol K) and elastic deformation (δ(ΔV/V){sub 0}=0.89%) jumps have proven that the Pa-3↔Pm-3m phase transition is a strong first order structural transformation. A total entropy change of ΔS{sub 0}=32.5 J/mol K is characteristic for the order–disorder phase transition, and is equal to the sum of entropy changes in the related material, (NH{sub 4}){sub 3}TiF{sub 7}, undergoing transformation between the two cubic phases through the intermediate phases. Hydrostatic pressure decreases the stability of the high temperature Pm-3m phase in (NH{sub 4}){sub 3}SnF{sub 7}, contrary to (NH{sub 4}){sub 3}TiF{sub 7}, characterised by a negative baric coefficient. The effect of experimental conditions on the chemical stability of (NH{sub 4}){sub 3}SnF{sub 7} was observed. - Graphical abstract: Strong first order structural transformation Pa-3↔Pm-3m in (NH{sub 4}){sub 3}SnF{sub 7} is associated with very large total entropy change of ΔS{sub 0}=32.5 J/mol K characteristic for the ordering processes and equal to the sum of entropy changes in the related (NH{sub 4}){sub 3}TiF{sub 7} undergoing transformation between the same two cubic phases through the intermediate phases. - Highlights: • (NH{sub 4}){sub 3}SnF{sub 7} undergoes strong first order Pa-3↔Pm-3m phase transition. • Anomalous behaviour of ΔC{sub p} and ΔV/V exists far below phase transition temperature. • Structural distortions are accompanied by huge total entropy change ΔS≈Rln50. • High pressure strongly increases the stability of Pa-3 phase in (NH{sub 4}){sub 3}SnF{sub 7}. • Entropy of the Pa-3↔Pm-3m phase transition does not depend on pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the transport properties and compositions of the Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5} series (RE=Pr, Sm, Gd, Dy; Pn=Sb, Bi)

The Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5} phases (RE=Pr, Sm, Gd, Dy; Pn=Sb, Bi) were successfully prepared from high temperature reactions at 1225–1300 °C. These phases maintain the same structure types as the parent RE{sub 9}Pn{sub 5}O{sub 5} phases, except for a Ca/RE mixing. The study and preparation of these phases was motivated by the desire to shift the metallic type properties of the parent RE{sub 9}Pn{sub 5}O{sub 5} phases to a level more suitable for thermoelectric applications. Electrical resistivity measurements performed on pure, bulk samples indicated all phases to be narrow band gap semiconductors or semimetals, supporting the charge balanced electron count of the Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5} composition. Unfortunately, all samples are too electrically resistive for any potential usage as thermoelectrics. Electronic band structure calculations performed on idealized RE{sub 9}Pn{sub 5}O{sub 5} structures revealed the presence of a pseudogap at the Fermi level, which is consistent with the observed electrical resistivity and Seebeck coefficient behavior. - Graphical abstract: Ca substitution in RE{sub 9}Pn{sub 5}O{sub 5} leads to charge-balanced Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5} phases with semiconducting or semimetallic properties. - Highlights: • The RE{sub 9}Pn{sub 5}O{sub 5} structure may be stabilized with calcium substitution in the form of Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5}. • The Ca{sub 2}RE{sub 7}Pn{sub 5}O{sub 5} phases maintain the parent P 4/n structure, albeit with Ca/RE mixing. • The Ca{sub 2}RE{sub 7}Sb{sub 5}O{sub 5} phases behave as semiconductors while Ca{sub 2}RE{sub 7}Bi{sub 5}O{sub 5} are semimetals with electron-electron correlations. • Electronic structure calculations yield a semimetal-like density of states for both Ca{sub 2}RE{sub 7}Sb{sub 5}O{sub 5} and Ca{sub 2}RE{sub 7}Bi{sub 5}O{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature synthesis and photocatalytic property of AgO/Ag{sub 2}Mo{sub 2}O{sub 7} heterojunction nanowires

Graphical abstract: The AgO nanoparticles are attached on the surface of the Ag{sub 2}Mo{sub 2}O{sub 7} nanowires to form a heterojunction structure. The AgO nanoparticles start embedding into the nanowires with increasing reaction temperature or time. Highlights: ► AgO/Ag{sub 2}Mo{sub 2}O{sub 7} heterojunction NWs were synthesized at room temperature for the first time. ► AgO particles embed into the Ag{sub 2}Mo{sub 2}O{sub 7} NWs with increase in reaction time and temperature. ► The heterojunction NWs display much better photocatalytic activity than the none-heterojunction NWs. ► The catalytic mechanism was proposed. -- Abstract: AgO/Ag{sub 2}Mo{sub 2}O{sub 7} heterojunction nanowires were synthesized at temperatures of 25 °C, 50 °C, 80 °C, and 110 °C, under magnetic stirring in solution reaction. The catalytic activity of AgO/Ag{sub 2}Mo{sub 2}O{sub 7} nanowires was evaluated by the degradation of Rhodmine B dye under the irradiation of the simulated sunlight. The synthesized samples were characterized by X-ray diffractometer, energy dispersive spectrometry, X-ray photoelectron spectrometer, scanning electron microscopy, and transmission electron microscopy. The results show that the AgO nanoparticles are attached on the surface of the Ag{sub 2}Mo{sub 2}O{sub 7} nanowires to form a heterojunction structure. The length of the nanowires is up to 10 μm and the size of the AgO nanoparticles is 10–20 nm. The length of nanowires increases with increasing reaction time and temperature while the AgO particles are gradually embedded into the nanowires. The photocatalytic activity is greatly improved for the AgO/Ag{sub 2}Mo{sub 2}O{sub 7} heterojunction nanowires compared with that of the pure Ag{sub 2}Mo{sub 2}O{sub 7} nanowires, indicating a remarkable role of AgO particles on the Ag{sub 2}Mo{sub 2}O{sub 7} nanowires in the photodegradation.

36 MATERIALS SCIENCE↗

Preparation and neutron diffraction study of Dion-Jacobson type oxynitrides LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} (x = 0.09, 0.29)

Highlights: ► Dion-Jacobson oxynitrides LiLaTa{sub 2}O{sub 7−3x}N{sub 2x}□{sub x} (x < 0.3) by ammonolysis of LiLaTa{sub 2}O{sub 7}. ► Enhanced thermal stability and band gap narrowing by the oxynitride modification. ► Locations of N and □ within LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} by neutron diffraction and {sup 7}Li MAS NMR. -- Abstract: Ammonolytic heating of Dion-Jacobson type layered perovskite LiLaTa{sub 2}O{sub 7} produced oxynitride derivatives LiLaTa{sub 2}O{sub 7−3x}N{sub 2x}□{sub x}via the substitution, 3O{sup 2−} → 2N{sup 3−} + □. The nitridation level increased with raising the temperature and/or increasing the time of reaction, reaching the limit at x ≈ 0.3 by the ammonolysis at 650 °C for 48 h. Upon the nitridation, tetragonal pristine lattice underwent a axis expansion together with c axis contraction. Neutron Rietveld refinement of LiLaTa{sub 2}O{sub 7} and LiLaTa{sub 2}O{sub 7−3x}N{sub 2x} (x = 0.09, 0.29) revealed that the Li-centered tetrahedra are gradually compressed along the 2-fold rotation axis, with the increase of x. Solid state {sup 7}Li nuclear magnetic resonance spectroscopy suggested that the anion vacancy resides mostly on the interlayer surface of perovskite block. As measured from the diffuse-reflectance spectroscopy, the nitridation induced marked reduction in the band gap magnitude, from 4.11 eV (x = 0) to 3.35 eV (x = 0.09) to 2.76 eV (x = 0.29).

36 MATERIALS SCIENCE↗

Septin 7 reduces nonmuscle myosin IIA activity in the SNAP23 complex and hinders GLUT4 storage vesicle docking and fusion

Glomerular epithelial cells, podocytes, are insulin responsive and can develop insulin resistance. Here, we demonstrate that the small GTPase septin 7 forms a complex with nonmuscle myosin heavy chain IIA (NMHC-IIA; encoded by MYH9), a component of the nonmuscle myosin IIA (NM-IIA) hexameric complex. We observed that knockdown of NMHC-IIA decreases insulin-stimulated glucose uptake into podocytes. Both septin 7 and NM-IIA associate with SNAP23, a SNARE protein involved in GLUT4 storage vesicle (GSV) docking and fusion with the plasma membrane. We observed that insulin decreases the level of septin 7 and increases the activity of NM-IIA in the SNAP23 complex, as visualized by increased phosphorylation of myosin regulatory light chain. Also knockdown of septin 7 increases the activity of NM-IIA in the complex. The activity of NM-IIA is increased in diabetic rat glomeruli and cultured human podocytes exposed to macroalbuminuric sera from patients with type 1 diabetes. Collectively, the data suggest that the activity of NM-IIA in the SNAP23 complex plays a key role in insulin-stimulated glucose uptake into podocytes. Furthermore, we observed that septin 7 reduces the activity of NM-IIA in the SNAP23 complex and thereby hinders GSV docking and fusion with the plasma membrane. - Highlights: • Septin 7, nonmuscle myosin heavy chain IIA (NMHC-IIA) and SNAP23 form a complex. • Knockdown of septin 7 increases NM-IIA activity in the SNAP23 complex. • Insulin decreases septin 7 level and increases NM-IIA activity in the SNAP23 complex. • Septin 7 hinders GSV docking/fusion by reducing NM-IIA activity in the SNAP23 complex.

60 APPLIED LIFE SCIENCES↗

Functionalized Thiophene-Based [7]Helicene: Chirooptical Properties versus Electron Delocalization

The functionalized, enantiomerically pure [7]helicene 1 derived from bis(benzodithiophene) functionalized with four heptyl groups is prepared from 1,8-dibromo-4,5-diheptylbenzo[1,2-b:4,3-b']dithiophene building block 2. Such [7]helicene structure, functionalized with bromines at the terminal positions of the helicene inner rim and multiple solubilizing alkyl groups, is an attractive building block for long [n]helicenes and oligo[7]helicenes. Chirooptical properties and the degree of electron delocalization are determined and compared to those of analogous carbon-sulfur [7]helicene and [7]helicenes derived from benzodithiophene to provide a correlation between chirooptical properties and the degree of electron delocalization. [7]Helicene 1 possesses a moderately increased electron delocalization, but its chirooptical properties are similar to those for analogous [7]helicenes with relatively lower electron delocalization, indicating that chirooptical properties are not significantly affected by electron delocalization for this series of [7]helicenes. Molecular structures of racemic [7]helicene 1 and its benzodithiophene building block 2 are confirmed by single-crystal X-ray analysis. Crystals of 2 are chiral and adopt the shape of long, flexible, flat needles that can be readily bent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, electronic structure, temperature-dependent optical and scintillation properties of CsCe 2 Br 7

CsCe 2 Br 7 is a self-activated inorganic scintillator that shows promising performance, but the understanding of the important structure-property relationships is lacking. In this work, we conduct a comprehensive study on CCsCe 2 Br 7 . The crystal structure of CsCe 2 Br 7 is refined using single crystal X-ray study for the first time. It crystallizes into the orthorhombic crystal system with Pmnb space group. Its electronic structure is revealed by Density Functional Theory (DFT) calculations. Two cerium emission centers are identified and the energy barriers related to the thermal quenching to 4f ground states of Ce 3+ for these two Ce centers are evaluated. CsCe 2 Br 7 single crystal has better light yield and energy resolution than CsCe 2 Cl 7 , but with an additional slow decay component of 1.7 s. The existence of a deep trap with a depth of 0.9 eV in CsCe 2 Cl 7 contributes to its higher afterglow level in comparison to that of CsCe 2 Br 7 . The most possible point defects in CsCe 2 Cl 7 and CsCe 2 Br 7 are proposed by considering the vapour pressure in the growth atmosphere upon melting point.

36 MATERIALS SCIENCE↗

Ly{alpha} EMITTERS AT z = 7 IN THE SUBARU/XMM-NEWTON DEEP SURVEY FIELD: PHOTOMETRIC CANDIDATES AND LUMINOSITY FUNCTION

We conducted a deep narrowband NB973 (FWHM = 200 A centered at 9755 A) survey of z = 7 Ly{alpha} emitters (LAEs) in the Subaru/XMM-Newton Deep Survey Field, using the fully depleted CCDs newly installed on the Subaru Telescope Suprime-Cam, which is twice more sensitive to z = 7 Ly{alpha} at {approx}1 {mu}m than the previous CCDs. Reaching the depth 0.5 mag deeper than our previous survey in the Subaru Deep Field that led to the discovery of a z = 6.96 LAE, we detected three probable z = 7 LAE candidates. Even if all the candidates are real, the Ly{alpha} luminosity function (LF) at z = 7 shows a significant deficit from the LF at z = 5.7 determined by previous surveys. The LAE number and Ly{alpha} luminosity densities at z = 7 are {approx}7.7%-54% and {approx}5.5%-39%, respectively, of those at z = 5.7, to the Ly{alpha} line luminosity limit of L(Ly{alpha}) {approx}> 9.2 x 10{sup 42} erg s{sup -1}. This could be due to evolution of the LAE population at these epochs as a recent galaxy evolution model predicts that the LAE modestly evolves from z = 5.7 to 7. However, even after correcting for this effect of galaxy evolution on the decrease in LAE number density, the z = 7 Ly{alpha} LF still shows a deficit from z = 5.7 LF. This might reflect the attenuation of Ly{alpha} emission by neutral hydrogen remaining at the epoch of reionization and suggests that reionization of the universe might not be complete yet at z = 7. If we attribute the density deficit to reionization, the intergalactic medium transmission for Ly{alpha} photons at z = 7 would be 0.4 {<=} T {sup IGM}{sub Ly{alpha} {<=}} 1, supporting the possible higher neutral fraction at the earlier epochs at z > 6 suggested by the previous surveys of z = 5.7-7 LAEs, z {approx} 6 quasars, and z > 6 gamma-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Fragile singlet ground-state magnetism in the pyrochlore osmates R 2 Os 2 O 7 ( R = Y and Ho)

The singlet ground state magnetism in pyrochlore osmates Y 2 Os 2 O 7 and Ho 2 Os 2 O 7 is studied by DC and AC susceptibility, specific heat, and neutron powder diffraction measurements. Despite the expected non-magnetic singlet in the strong spin-orbit coupling (SOC) limit for Os 4+ (5d 4 ), Y 2 Os 2 O 7 exhibits a spin-glass (SG) ground state below 4 K with weak magnetism, suggesting possible proximity to a quantum phase transition between the non-magnetic state in the strong SOC limit and the magnetic state in the strong superexchange limit. Ho 2 Os 2 O 7 has the same structural distortion as occurs in Y 2 Os 2 O 7 . However, the Os sublattice in Ho 2 Os 2 O 7 shows long- range magnetic ordering below 36 K. We find that the sharp difference of the magnetic ground state between Y 2 Os 2 O 7 and Ho 2 Os 2 O 7 signals the singlet ground state magnetism in R 2 Os 2 O 7 is fragile and can be disturbed by the weak 4f—5d interactions.

36 MATERIALS SCIENCE↗

Structure of A=7 iso-triplet {lambda} hypernuclei studied with the four-body cluster model

The structure of the T=1 isotriplet hypernuclei, {sub {lambda}}{sup 7}He, {sub {lambda}}{sup 7}Li, and {sub {lambda}}{sup 7}Be within the framework of an {alpha}+{lambda}+N+N four-body cluster model is studied. Interactions between the constituent subunits are determined so as to reproduce reasonably well the observed low-energy properties of the {alpha}N, {alpha}{lambda}, {alpha}NN, and {alpha}{lambda}N subsystems. Furthermore, the two-body {lambda}N interaction is adjusted so as to reproduce the 0{sup +}-1{sup +} splitting of {sub {lambda}}{sup 4}H. Also, a phenomenological {lambda}N charge symmetry breaking (CSB) interaction is introduced. The {lambda} binding energy of the ground state in {sub {lambda}}{sup 7}He is predicted to be 5.16(5.36) MeV with (without) the CSB interaction. The calculated energy splittings of the 3/2{sup +}-5/2{sup +} states in {sub {lambda}}{sup 7}He and {sub {lambda}}{sup 7}Li are around 0.1 MeV. We point out that there is a three-layer structure of the matter distribution, {alpha} particle, {lambda} skin, and proton or neutron halo, in the {sub {lambda}}{sup 7}He(J=5/2{sup +}), {sub {lambda}}{sup 7}Li(J=5/2{sup +}), and {sub {lambda}}{sup 7}Be(J=1/2{sup +}) states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TANK 7 CHARACTERIZATION AND WASHING STUDIES

A 3-L PUREX sludge sample from Tank 7 was characterized and then processed through a series of inhibited water washes to remove oxalate, sodium, and other soluble ions. Current plans use Tank 7 as one of the feed sources for Sludge Batch 7 (SB7). Tank 7 is high in oxalate due to the oxalic acid cleaning of the sludge heels from Tanks 5 and 6 and subsequent transfer to Tank 7. Ten decant and nine wash cycles were performed over a 47 day period at ambient temperature. Initially, seven decants and seven washes were completed based on preliminary estimates of the number of wash cycles required to remove the oxalate in the sludge. After reviewing the composition data, SRNL recommended the completion of 2 or 3 more decant/wash cycles to ensure all of the sodium oxalate had redissolved. In the first 7 washes, the slurry oxalate concentration was 12,300 mg/kg (69.6% oxalate removal compared to 96.1% removal of the other soluble ions). After all ten decants were complete, the slurry oxalate concentration was 3,080 mg/kg (89.2% oxalate removal compared to 99.0% of the other soluble ions). The rate of dissolution of oxalate increased significantly with subsequent washes until all of the sodium oxalate had been redissolved after seven decant/wash cycles. The measured oxalate concentrations agreed very well with LWO predictions for washing of the Tank 7 sample. Highlights of the analysis and washing of the Tank 7 sample include: (1) Sodium oxalate was detected in the as-received filtered solids. 95% of the oxalate was insoluble (undissolved) in the as-received slurry. (2) No sodium oxalate was detected in the post-wash filtered solids. (3) Sodium oxalate is the last soluble species that redissolves during washing with inhibited water. In order to significantly reduce the sodium oxalate concentration, the sludge must be highly washed, leaving the other soluble anions and cations (including sodium) very low in concentration. (4) The post-wash slurry had 1% of the soluble anions and cations remaining, with the exception of sodium and oxalate, for which the percentages were 2.8% and 10.8% respectively. The post-wash sodium concentration was 9.25 wt% slurry total solids basis and 0.15 M supernate. (5) The settling rate of slurry was very fast allowing the completion of one decant/wash cycle each day. (6) The measured yield stress of as-received (6.42 wt% undissolved solids) and post-wash (7.77 wt% undissolved solids) slurry was <1 Pa. For rapidly settling slurries, it can be hard to measure the yield stress of the slurry so this result may be closer to the supernate result than the slurry. The recommended strategy for developing the oxalate target for sludge preparation for Sludge Batch 7 includes the following steps: (1) CPC simulant testing to determine the percent oxalate destruction and acid mix needed to produce a predicted redox of approximately 0.2 Fe{sup +2}/{Sigma}Fe in a SME product while meeting all DWPF processing constraints. (2) Perform a DWPF melter flammability assessment to ensure that the additional carbon in the oxalate together with other carbon sources will not lead to a flammability issue. (3) Perform a DWPF glass paper assessment to ensure the glass produced will meet all DWPF glass limits due to the sodium concentration in the sludge batch. The testing would need to be repeated if a significant CPC processing change, such as an alternative reductant to formic acid, is implemented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simulations of 7 Be and 10 Be with the GEOS-Chem global model v14.0.2 using state-of-the-art production rates

The cosmogenic radionuclides 7 Be and 10 Be are useful aerosol tracers for atmospheric transport studies. Combining 7 Be and 10 Be measurements with an atmospheric transport model can not only improve our understanding of the radionuclide transport and deposition processes but also provide an evaluation of the transport process in the model. To simulate these aerosol tracers, it is critical to evaluate the influence of radionuclides production uncertainties on simulations. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate 7 Be and 10 Be with different production scenarios: the default production rate in GEOS-Chem based on an empirical approach (Lal and Peters, 1967; denoted as LP67), and two production rates from the CRAC:Be (Cosmic Ray Atmospheric Cascade: Beryllium; Poluianov et al., 2016) model considering only geomagnetic cut-off rigidities for a geocentric axial dipole (denoted as P16) or realistic spatial geomagnetic cut-off rigidity variations due to non-dipole moments of the geomagnetic field (denoted as P16spa). The model results are comprehensively evaluated with a large number of measurements including surface air concentrations and deposition fluxes. The model with the P16spa production can reproduce the absolute values and temporal variability of 7 Be and 10 Be surface concentrations and deposition fluxes on annual and sub-annual scales, as well as the vertical profiles of air concentrations. Simulations with the LP67 production tend to overestimate the absolute values of 7 Be and 10 Be concentrations. The P16 simulations suggest less than 10% differences compared to P16spa but tend to produce a significant positive bias (>20%) in the 7 Be deposition fluxes over East Asia. We find that the deposition fluxes are more sensitive to the production in the troposphere and downward transport from the stratosphere. Independent of the production models, surface air concentrations and deposition fluxes from all simulations show similar seasonal variations, suggesting a dominant meteorological influence. The model can also simulate reasonably the stratosphere-troposphere exchange process of 7 Be and 10 Be by producing stratospheric contribution and 10 Be/ 7 Be ratio values that agree with measurements. Finally, we illustrate the importance of including the time-varying solar modulation in the production calculation, which can significantly improve the agreement between model results and measurements, especially at mid- and high- latitudes. Reduced uncertainties in the production rates, as demonstrated in this study, improve the utility of 7 Be and 10 Be as aerosol tracers for evaluating and testing transport and scavenging processes in global models.

Minjie Zheng↗

Two anionic [Cu{sup I}{sub 6}X{sub 7}]{sub n}{sup n-} (X=Br and I) chain-based organic-inorganic hybrid solids with N-substituted benzotriazole ligands

Solvothermal reactions of the flexible ligand 1,6-Bi(benzotriazole)hexane with CuI and KI or CuBr and KBr in ethanol generate two hybrid compounds, namely, {l_brace}(HETA)[(Cu{sub 6}I{sub 7})(ETA){sub 2}]{r_brace}{sub n}(1) and {l_brace}K(Cu{sub 6}Br{sub 7})(BBTH){r_brace}{sub n}(2) (ETA=N-ethylbenzotriazole, HETA=protonated N-ethylbenzotriazole, BBTH=1,6-bi(benzotriazole)hexane). In 1, two [Cu{sub 3}I{sub 4}] vertex missing cubane-like subunits link each other by sharing one I atom to give a [Cu{sub 6}I{sub 7}] cluster, which further form novel 1D [Cu{sub 6}I{sub 7}]{sub n}{sup n-} anionic chain. Two in-situ generated ETA ligands finished the 4-coordinated environments of copper centers and another one discrete protonated ETA ligand keeps the charge neutrality for 1. In complex 2, bowl-shaped [Cu{sub 5}Br{sub 4}] clusters and rhomboid [Cu{sub 2}Br{sub 2}] dimers link each other to generate a [Cu{sub 6}Br{sub 7}]{sub n}{sup n-} 1D chain. BBTH ligands complete the tetrahedral spheres of Cu(I), and 7-coordinated K atoms further extend the 1D chain motifs to a 2D hybrid layer of 2. The UV-vis diffuse reflectance spectrum and luminescence measurements show that compound 1 and 2 both are potential semiconductor and photoluminescence materials. - Graphical abstract: Two unprecedented anionic [Cu{sup I}{sub 6}X{sub 7}]{sub n}{sup n-} (X=Br and I) chain-based organic-inorganic hybrid solids, namely, {l_brace}(HETA)[(Cu{sub 6}I{sub 7})(ETA){sub 2}]{r_brace}{sub n} (1) and {l_brace}K(Cu{sub 6}Br{sub 7})(BBTH){r_brace}{sub n}(2) (ETA=N-ethylbenzotriazole, HETA=protonated N-ethylbenzotriazole, BBTH=1,6-bi(benzotriazole)- hexane) have been synthesized under solvothermal reactions and characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La 3 Ni 2 O 7

Abstract Recently, superconductivity at high temperatures is observed in bulk La 3 Ni 2 O 7−δ under high pressure. However, the attainment of high‐purity La 3 Ni 2 O 7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La 3 Ni 2 O 7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La 3 Ni 2 O 7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni 2+ /Ni 3+ in Sr‐doped La 3 Ni 2 O 7 , aligning them with those of “La 3 Ni 2 O 7.05” , thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La 3 Ni 2 O 7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La 3 Ni 2 O 7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La 3 Ni 2 O 7−δ , despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

36 MATERIALS SCIENCE↗

Epitaxial stabilization of (110)-layered perovskites of the RE{sub 2}Ti{sub 2}O{sub 7} (RE=La, Nd, Sm, Gd) family

Thin films of RE{sub 2}Ti{sub 2}O{sub 7} (RE=La, Nd, Sm, Gd) were deposited on single crystal SrTiO{sub 3} (110) substrates at 900 deg. C using pulsed laser deposition. X-ray diffraction (XRD) results showed sharp (00k) peaks (in theta-2theta scans) with narrow rocking curves (omega-scan peak widths of 0.4-0.9{sup o}), indicating that all compositions adopted the (110)-layered perovskite structure. While this is the stable structure for RE=La and Nd, it is metastable for RE=Sm and Gd. The metastable compounds are formed directly through epitaxial stabilization at these high temperatures and are shown to be isostructural to monoclinic La{sub 2}Ti{sub 2}O{sub 7}. The a, b, and c lattice parameters decreased monotonically with decreasing size of the RE cation, while the monoclinic angle remained fairly constant. The epitaxial relationship between the (110)-layered RE{sub 2}Ti{sub 2}O{sub 7} films and the SrTiO{sub 3}(110) substrate was found by XRD and transmission electron microscopy to be {l_brace}001{r_brace}<010>{sub film}||{l_brace}110{r_brace}<11-bar0>{sub SrTiO{sub 3}}. The single-phase, metastable, epitaxial, 100 nm thick films maintained the layered perovskite structure even after annealing at 900 deg. C for two hours in 200 Torr of oxygen. - Graphical abstract: Epitaxial thin films of RE{sub 2}Ti{sub 2}O{sub 7} (RE=Gd, Sm, Nd, and La) were deposited on single crystal SrTiO{sub 3} (110) substrates using pulsed laser deposition (PLD). All compositions adopted the monoclinic (110)-layered perovskite structure, which is the stable phase for La{sub 2}Ti{sub 2}O{sub 7} and Nd{sub 2}Ti{sub 2}O{sub 7} but is metastable with respect to the pyrochlore phase for Sm{sub 2}Ti{sub 2}O{sub 7} and Gd{sub 2}Ti{sub 2}O{sub 7}.

36 MATERIALS SCIENCE↗

Synthesis, crystal and electronic structure, and physical properties of the new lanthanum copper telluride La{sub 3}Cu{sub 5}Te{sub 7}

The new lanthanum copper telluride La{sub 3}Cu{sub 5-x}Te{sub 7} has been obtained by annealing the elements at 1073 K. Single-crystal X-ray diffraction studies revealed that the title compound crystallizes in a new structure type, space group Pnma (no. 62) with lattice dimensions of a=8.2326(3) A, b=25.9466(9) A, c=7.3402(3) A, V=1567.9(1) A{sup 3}, Z=4 for La{sub 3}Cu{sub 4.86(4)}Te{sub 7}. The structure of La{sub 3}Cu{sub 5-x}Te{sub 7} is remarkably complex. The Cu and Te atoms build up a three-dimensional covalent network. The coordination polyhedra include trigonal LaTe{sub 6} prisms, capped trigonal LaTe{sub 7} prisms, CuTe{sub 4} tetrahedra, and CuTe{sub 3} pyramids. All Cu sites exhibit deficiencies of various extents. Electrical property measurements on a sintered pellet of La{sub 3}Cu{sub 4.86}Te{sub 7} indicate that it is a p-type semiconductor in accordance with the electronic structure calculations. -- Graphical abstract: Oligomeric unit comprising interconnected CuTe{sub 3} pyramids and CuTe{sub 4} tetrahedra. Display Omitted Research highlights: {yields} La{sub 3}Cu{sub 5-x}Te{sub 7} adopts a new structure type. {yields} All Cu sites exhibit deficiencies of various extents. {yields} The coordination polyhedra include trigonal LaTe{sub 6} prisms, capped trigonal LaTe{sub 7} prisms, CuTe{sub 4} tetrahedra and CuTe{sub 3} pyramids. {yields} La{sub 3}Cu{sub 5-x}Te{sub 7} is a p-type semiconductor.

36 MATERIALS SCIENCE↗