Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “3D Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

[Global Atmospheric Chemistry/Transport Modeling and Data-Analysis]

This grant supported a global atmospheric chemistry/transport modeling and data- analysis project devoted to: (a) development, testing, and refining of inverse methods for determining regional and global transient source and sink strengths for trace gases; (b) utilization of these inverse methods which use either the Model for Atmospheric Chemistry and Transport (MATCH) which is based on analyzed observed winds or back- trajectories calculated from these same winds for determining regional and global source and sink strengths for long-lived trace gases important in ozone depletion and the greenhouse effect; (c) determination of global (and perhaps regional) average hydroxyl radical concentrations using inverse methods with multiple "titrating" gases; and (d) computation of the lifetimes and spatially resolved destruction rates of trace gases using 3D models. Important ultimate goals included determination of regional source strengths of important biogenic/anthropogenic trace gases and also of halocarbons restricted by the Montreal Protocol and its follow-on agreements, and hydrohalocarbons now used as alternatives to the above restricted halocarbons.

Prinn, Ronald G.↗

TU-H-CAMPUS-TeP1-04: Novel 3D Printed Plastic Cutouts Filled with Aluminum Oxide for Same Day Electron Radiotherapy

Purpose: Clinics that outsource electron cutout manufacturing may be unable to simulate and treat patients on the same day. To enable same day treatment, we investigate the use of 3D printed hollow cutouts filled with 30 grit Al{sub 2}O{sub 3} powder. We verified the dosimetric equivalence of such a cutout relative to an outsourced Copper cutout. Methods: Printing was performed using a Ultibots Kossel 250 V-Slot 3D printer and polylactic acid filament. Printing files were derived from an in-house 3D model designed to mate with a Varian 6 cm electron cone. Relative to conventional cutouts (Copper or Cerrobend), the height of the hollow plastic cutout was extended by 1.0 cm to increase attenuation. Measurements were performed for 6 MeV in solid water at dmax (1.4 cm) with Gafchromic™ EBT3 film; the cutout was kidney-shaped with a long and short axis of approximately 5 and 2 cm, respectively. The Copper cutout was based on an outline of the 3D printed cutout.A calibration film was exposed immediately after the electron irradiations. All films, including an un-irradiated one, were from the same batch. Films were scanned on an Epson 10000XL flatbed scanner. Film analysis was performed in DoseLab (MOBIUS Medical Systems, Houston, Tx). Results: Visual comparison of the physical cutouts revealed that the Copper cutout had a slightly smaller opening than the printed cutout. Line profiles through the registered films indicated agreement within 5% in the open section. 99.9% of pixels passed gamma analysis with 2% local percent difference, 2 mm DTA, and a 25% threshold. Conclusion: Same day simulation and treatment with electrons is feasible with 3D printing of a hollow cutout filled with Al{sub 2}O{sub 3}. Future work will include evaluations of additional cutout shapes at different depths for higher energies. Other printing materials, such as bismuth, are being tested.

60 APPLIED LIFE SCIENCES↗

Monte Carlo investigation of the increased radiation deposition due to gold nanoparticles using kilovoltage and megavoltage photons in a 3D randomized cell model

Purpose: Investigation of increased radiation dose deposition due to gold nanoparticles (GNPs) using a 3D computational cell model during x-ray radiotherapy.Methods: Two GNP simulation scenarios were set up in Geant4; a single 400 nm diameter gold cluster randomly positioned in the cytoplasm and a 300 nm gold layer around the nucleus of the cell. Using an 80 kVp photon beam, the effect of GNP on the dose deposition in five modeled regions of the cell including cytoplasm, membrane, and nucleus was simulated. Two Geant4 physics lists were tested: the default Livermore and custom built Livermore/DNA hybrid physics list. 10{sup 6} particles were simulated at 840 cells in the simulation. Each cell was randomly placed with random orientation and a diameter varying between 9 and 13 {mu}m. A mathematical algorithm was used to ensure that none of the 840 cells overlapped. The energy dependence of the GNP physical dose enhancement effect was calculated by simulating the dose deposition in the cells with two energy spectra of 80 kVp and 6 MV. The contribution from Auger electrons was investigated by comparing the two GNP simulation scenarios while activating and deactivating atomic de-excitation processes in Geant4.Results: The physical dose enhancement ratio (DER) of GNP was calculated using the Monte Carlo model. The model has demonstrated that the DER depends on the amount of gold and the position of the gold cluster within the cell. Individual cell regions experienced statistically significant (p < 0.05) change in absorbed dose (DER between 1 and 10) depending on the type of gold geometry used. The DER resulting from gold clusters attached to the cell nucleus had the more significant effect of the two cases (DER {approx} 55). The DER value calculated at 6 MV was shown to be at least an order of magnitude smaller than the DER values calculated for the 80 kVp spectrum. Based on simulations, when 80 kVp photons are used, Auger electrons have a statistically insignificant (p < 0.05) effect on the overall dose increase in the cell. The low energy of the Auger electrons produced prevents them from propagating more than 250-500 nm from the gold cluster and, therefore, has a negligible effect on the overall dose increase due to GNP.Conclusions: The results presented in the current work show that the primary dose enhancement is due to the production of additional photoelectrons.

61 RADIATION PROTECTION AND DOSIMETRY↗

A Precessing Be Disc as a Possible Model for Occultation Events in GX 304-1

We report on the RXTE detection of a sudden increase in the absorption column density, NH, during the 2011 May outburst of GX 304−1. The NH increased up to ∼16 × 10(exp 22) atoms cm(exp −2), which is a factor of 3–4 larger than what is usually measured during the outbursts of GX 304−1 as covered by RXTE. Additionally, an increase in the variability of the hardness ratio as calculated from the energy resolved RXTE-Proportional Counter Array light curves is measured during this time range. We interpret these facts as an occultation event of the neutron star by material in the line of sight. Using a simple 3D model of an inclined and precessing Be disc around the Be-type companion, we are able to qualitatively explain the NH evolution over time. We are able to constrain the Be disc density to be of the order of 10(exp −11)g cm(exp −3). Our model strengthens the idea of inclined Be discs as origin of double-peaked outbursts as the derived geometry allows accretion twice per orbit under certain conditions.

Kühnel, M.↗

Combined multi-analytical approach for study of pore system in bricks: How much porosity is there?

During the firing of bricks, mineralogical and textural transformations produce an artificial aggregate characterised by significant porosity. Particularly as regards pore-size distribution and the interconnection model, porosity is an important parameter to evaluate and predict the durability of bricks. The pore system is in fact the main element, which correlates building materials and their environment (especially in cases of aggressive weathering, e.g., salt crystallisation and freeze-thaw cycles) and determines their durability. Four industrial bricks with differing compositions and firing temperatures were analysed with “direct” and “indirect” techniques, traditional methods (mercury intrusion porosimetry, hydric tests, nitrogen adsorption) and new analytical approaches based on digital image reconstruction of 2D and 3D models (back-scattered electrons and computerised X-ray micro-Tomography, respectively). The comparison of results from different analytical methods in the “overlapping ranges” of porosity and the careful reconstruction of a cumulative curve, allowed overcoming their specific limitations and achieving better knowledge on the pore system of bricks. - Highlights: •Pore-size distribution and structure of the pore system in four commercial bricks •A multi-analytical approach combining “direct” and “indirect” techniques •Traditional methods vs. new approaches based on 2D/3D digital image reconstruction •The use of “overlapping ranges” to overcome the limitations of various techniques.

36 MATERIALS SCIENCE↗

NEAMS Workbench and Bison Fuel Performance Remote Application Configuration

The mission of the US Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program is to develop, apply, deploy, and support state-of-the-art predictive modeling and simulation tools for the design and analysis of current and future nuclear energy systems. This is accomplished using computing architectures that range from laptops to leadership class facilities. The NEAMS Workbench [1,2,3] initiative will facilitate the transition from conventional computer codes to high-fidelity ones by providing a common analysis environment and interface for model creation, review, execution, output review, and visualization for integrated codes. The BISON fuel performance code [4] is a finite element method (FEM)-based software being developed by multiple organizations led by the Idaho National Laboratory for the US Department of Energy Office of Nuclear Energy. BISON can simulate a variety of fuel and cladding compositions and geometries in varying dimensionalities, depending upon the problem type and complexity, including one-dimensional (1D), 1.5D, 2D axially symmetric (2D-rz), 2D radial-azimuthal (2D-rθ), or 3D models. The NEAMS Workbench allows execution of the BISON fuel performance code on local and remote compute resources. In this report, the detailed instructions of configuring the NEAMS Workbench for remote execution of the BISON fuel performance code on a portable batch system (PBS)-scheduled compute resource, as well the transfer of associated Bison files, is illustrated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Debris Dispersion Model Using Java 3D

This paper describes web based simulation of Shuttle launch operations and debris dispersion. Java 3D graphics provides geometric and visual content with suitable mathematical model and behaviors of Shuttle launch. Because the model is so heterogeneous and interrelated with various factors, 3D graphics combined with physical models provides mechanisms to understand the complexity of launch and range operations. The main focus in the modeling and simulation covers orbital dynamics and range safety. Range safety areas include destruct limit lines, telemetry and tracking and population risk near range. If there is an explosion of Shuttle during launch, debris dispersion is explained. The shuttle launch and range operations in this paper are discussed based on the operations from Kennedy Space Center, Florida, USA.

Thirumalainambi, Rajkumar↗

IC reports (2021)

We requested HPC support to continue research on the seismic waves generated by impacts. We used the following codes: (1) the Hybrid Optimization Software Suite (HOSS), developed at LANL. HOSS is based on a combined Finite and Discrete Element Method (FDEM). New material models are developed for the sedimentary rocks. HOSS has been recently benchmarked to iSale and FLAG codes. SPECFEM3D is an open-source code developed since the last 90s. It won the Gordon Bell award for best performance in 2003, was finalist again in 2008 for a run at 0.16 petaflops on 149,784 cores on the ‘Jaguar’ Cray system at Oak Ridge National Laboratory. It also won the BULL Joseph Fourier supercomputing award in 2010.; SW4 is a 4th-order finite difference code developed at LLNL which is currently actively developed to handle complex 3D models and to be ported on future exascale platforms. We assessed our need to a total of 3.9M CPU-hrs for year 1 and and 3.1 M for year 2.

79 ASTRONOMY AND ASTROPHYSICS↗

Tech-X contributions to the Center for Tokamak Transients (CTTS) Scientific Discovery through Advanced Computing (SciDAC) project (Final Report)

The Center for Tokamak Transients Simulations (CTTS) consists of computational plasma physicists, computer scientists, and applied mathematicians who are together developing and applying simulation software to improve our understanding of and ability to predict and control transient events in tokamak discharges, particularly those that lead to violent disruptions. We have major simulation activities concerning disruptions that are caused by violating ideal MHD stability criteria, vertical displacement events, resistive wall modes, and tearing modes. We are performing comprehensive modeling of disruption mitigation techniques, particularly by shattered pellet injection (SPI). The Center is built around two mature extended MHD codes: NIMROD and M3D-C1. These codes are being extended in a number of ways as required by the demands of disruption modeling, and are being optimized to work well for larger problem size and modern computer architectures as required to model tokamak plasmas with realistic parameters over the required timescales. The codes will be coupled to the FronTier code for state-of-the-art modeling of SPI. Validation with experimental data on DIII-D, NSTX, and JET is being facilitated by rigorous uncertainty quantification (UQ). The high-level objectives of the center are to: (1) Develop better understanding and improved predictive capability of when crossing a linear stability boundary will likely lead to a disruption, (2) Provide a tool for calculating vessel forces, both axisymmetric and non-axisymmetric, for worst case VDE and other disruptions in tokamaks, (3) Develop increased understanding and improved predictive capability for locked mode disruptions and how best to avoid them, (4) Develop, verify, and validate 3D models for disruption mitigation by shattered pellets that can be used to design and optimize a system for future tokamaks, and (5) Increase the efficiency and scalability of the M3D-C1 and NIMROD codes so that they can model disruptions in ITER scale devices using the most powerful DOE HPC hardware, and (6) Demonstrate code-coupling via FronTier coupling with NIMROD and M3D-C1 and by interfacing these codes within a WDM framework.

97 MATHEMATICS AND COMPUTING↗

3D Radiative MHD Modeling of the Solar Atmospheric Dynamics and Structure

Dramatic dynamical phenomena accompanied by strong thermodynamic and magnetic structuring are the primary drivers of great interest in studying the solar atmosphere with high spatial and temporal resolutions. Using current computational capabilities, it has become possible to model the magnetized solar plasma in different regimes with a high degree of realism. To study the fine structuring of the solar atmosphere and dynamics, we use 3D MHD radiative models covering all layers from the upper convection zone to the corona. Realistic 3D radiative MHD modeling of the solar magnetoconvection and atmosphere allows us to generate synthetic observables that directly link the physical properties of the solar plasma to spectroscopic observables. In the presentation, we discuss qualitative and quantitative changes of the atmospheric structure and dynamics at different layers of the solar atmosphere, properties of acoustic and surface gravity waves, sources of local heating in the chromosphere-corona transition region, formation of shocks, and high-frequency oscillations in the corona, as well as manifestation of these phenomena in the modeled observables.

SMD↗

Neural Radiance Fields for Shadow Removal and Relighting of Satellite Imagery

Multi-view stereo photogrammetric techniques have been conventionally utilized to generate Global Digital Elevation Models (GDEM) of planetary and lunar surfaces. However, these methods, relying on conventional feature detectors, are often subject to inaccuracies caused by changes in lighting conditions, including diffuse reflection and harsh shading. This has limited the ability of these methods to accurately reconstruct shadowed regions in orbital imagery, such as highly shaded urban areas and the permanently shadowed regions (PSRs) located in the lunar surface, which are critical targets for NASA's Artemis program. Neural Radiance Fields (NeRFs) offer a novel solution to these limitations by breaking away from traditional photogrammetric assumptions of ridged, opaque surfaces. NeRFs are capable of reconstructing 3D objects with variably transmissive properties, such as fluids, PSRs, and reflective surfaces. In this work, we demonstrate the robustness of NeRFs in generating high-fidelity 3D models of terrain from highly shaded orbital imagery acquired from small satellites in low earth orbit (LEO). Our results showcase the ability of NeRF to overcome the limitations of traditional photogrammetric methods and provide a promising solution for reconstructing complex scenes in challenging lighting conditions.

Caleb Ashmore Adams↗

Benchmark Simulation of Natural Circulation Cooling System with Salt Working Fluid Using SAM

Liquid salt-cooled reactors, such as the Fluoride Salt-Cooled High-Temperature Reactor (FHR), offer passive decay heat removal through natural circulation using Direct Reactor Auxiliary Cooling System (DRACS) loops. The behavior of such systems should be well-understood through performance analysis. The advanced system thermal-hydraulics tool System Analysis Module (SAM) from Argonne National Laboratory has been selected for this purpose. The work presented here is part of a larger study in which SAM modeling capabilities are being enhanced for the system analyses of FHR or Molten Salt Reactors (MSR). Liquid salt thermophysical properties have been implemented in SAM, as well as properties of Dowtherm A, which is used as a simulant fluid for scaled experiments, for future code validation studies. Additional physics modules to represent phenomena specific to salt-cooled reactors, such as freezing of coolant, are being implemented in SAM. This study presents a useful first benchmark for the applicability of SAM to liquid salt-cooled reactors: it provides steady-state and transient comparisons for a salt reactor system. A RELAP5-3D model of the Mark-1 Pebble-Bed FHR (Mk1 PB-FHR), and in particular its DRACS loop for emergency heat removal, provides steady state and transient results for flow rates and temperatures in the system that are used here for code-to-code comparison with SAM. The transient studied is a loss of forced circulation with SCRAM event. To the knowledge of the authors, this is the first application of SAM to FHR or any other molten salt reactors. While building these models in SAM, any gaps in the code’s capability to simulate such systems are identified and addressed immediately, or listed as future improvements to the code.

Ahmed, K. K.↗

Inhibition of TGF-β pathway reverts extracellular matrix remodeling in T. cruzi-infected cardiac spheroids

Highlights: • A model of cardiac spheroids to study fibrosis in pathological processes is proposed. • The study evaluates a TGF-β inhibitor in restoring extracellular matrix balance disrupted by T. cruzi infection. • Inhibition of TGF-β signaling reduces fibrosis and hypertrophy in infected-cardiac spheroids. • The extracellular matrix remodeling is achieved through regulation of MMP-2 activity and TIMP-1 expression. Chagasic cardiomyopathy (CC) is the main manifestation of Chagas Disease (CD). CC is a progressive dysfunctional illness, in which transforming growth factor beta (TGF-β) plays a central role in fibrogenesis and hypertrophy. In the present study, we tested in a three-dimensional (3D) model of cardiac cells culture (named cardiac spheroids), capable of mimicking the aspects of fibrosis and hypertrophy observed in CC, the role of TGF-β pathway inhibition in restoring extracellular matrix (ECM) balance disrupted by T. cruzi infection. Treatment of T. cruzi-infected cardiac spheroids with SB 431542, a selective inhibitor of TGF-β type I receptor, resulted in a reduction in the size of spheroids, which was accompanied by a decrease in parasite load and in fibronectin expression. The inhibition of TGF-β pathway also promoted an increase in the activity of matrix metalloproteinase (MMP)-2 and a decrease in tissue inhibitor of matrix metalloproteinase (TIMP)-1 expression, which may be one of the mechanisms regulating extracellular matrix remodeling. Therefore, our study provides new insights into the molecular mechanisms by which inhibition of TGF-β signaling reverts fibrosis and hypertrophy generated by T. cruzi during CC and also highlights the use of cardiac spheroids as a valuable tool for the study of fibrogenesis and anti-fibrotic compounds.

60 APPLIED LIFE SCIENCES↗

Flow boiling transient critical heat flux tests with stainless steel and FeCrAl: Transient correlation implementation, model calibration, and sensitivity analysis

In this study, steady-state and transient internal-flow critical heat flux (CHF) experiments were carried out under two flow conditions, at atmospheric pressure, on 316 stainless steel (316-SS) and iron-chromium-aluminum (FeCrAl) tubes. Slow power transients at a low mass flow (300 kg/m 2 - s) with very low subcooling (X e =-0.0054) generated premature CHFs, which were prevented by faster power transients and high mass flow (1000 kg/m 2 - s). The measured transient CHFs increased linearly with increasing power transients, compared with the steady-state CHF. Yet, the wall superheat at the CHFs decreased with faster power transients. Transient CHF correlations highlighting heterogeneous spontaneous nucleation were calibrated to the measured CHFs and compared with other existing correlations. Transient CHF multipliers were acquired from pool and flow boiling empirical CHF correlations that were generated. The multipliers were applied to the RELAP5-3D nuclear system code to analyze the discrepancies between the measured data and the predicted CHF and post-CHF behavior, which improved peak cladding temperature predictions by 24.6%. A variance-based global sensitivity study perturbing the experimental uncertainties and cladding material thermal properties showed the diminishing influence of flow boiling heat transfer with increasing power transients, highlighting the significance of the volumetric heat capacity for the cladding integrity during transients. Transient CHF correlations were applied to the most limiting design basis accident: a hot-zero-power reactivity-initiated accident on a generic pressurized water reactor RELAP5-3D model.

36 MATERIALS SCIENCE↗

A mechanistic model of a PWR-based nuclear power plant in response to external hazard-induced station blackout accidents

Natural hazard-induced nuclear accidents, such as the Fukushima Daiichi Accident that occurred in Japan in 2011, have significantly increased reactor safety studies in understanding nuclear power plant (NPP) responses to external hazard events such as earthquakes and floods. Natural hazards could cause the loss of offsite power in nuclear power plants, potentially leading to a Station Blackout (SBO) accident that significantly contributes to the overall risk of nuclear power plant accidents. Despite the fact that extensive research has been conducted on the station blackout accident for nuclear power plant, further understanding of these events is needed, particularly in the context of the dynamic nature of external hazards such as external flooding. This paper estimates the progression of station blackout events for a generic pressurized water reactor (PWR) in response to external flooding events. The original RELAP5-3D model of the Westinghouse four-loop design pressurized water reactor was adopted and modified to simulate the external flood-induced station blackout accident, including the short-term and long-term station blackout scenarios. A sensitivity analysis of long-term station blackout, examining reactor operation times and analyzing key parameters over time, was also conducted in this work. The results of the analyses, especially the critical timing parameters of key event sequences, provide useful insights about the time during the external flooding event, which is important for plant operators to make timely decisions to prevent potential core damage. This paper represents significant progress toward developing an integrated risk assessment framework for further identifying and assessing the effects of the critical sources of uncertainties of nuclear power plant under external hazard-induced events.

Liu, Tao↗

Vadose and Saturated Zone Flow and Transport Calculations for the Active Trenches of the Low-Level Burial Grounds, Hanford Site, Washington

The purpose of the fate and transport modeling described in this environmental calculation file (ECF) is to evaluate the impacts to groundwater associated with waste disposal operations at Mixed Waste Low-Level Burial Ground (LLBG) Trenches 31 and 34 to satisfy requirements in DOE O 435.1, Radioactive Waste Management. The model integrates the flow and transport in the vadose zone beneath the active trenches with the saturated zone downgradient of the trenches to predict the radionuclide concentration at the point of assessment (POA). DOE M 435.1-1, Radioactive Waste Management Manual, defines the POA as the point of highest projected dose or concentration beyond a 100 m (328 ft) buffer zone surrounding the disposed waste. The modeling is conducted in accordance with the DOE G 435.1, Implementation Guide for Use with DOE M 435.1-1, performance assessment (PA) guidelines. The modeling involves evaluation of the groundwater concentrations and radionuclide arrival times during the 1,000-year compliance and 10,000-year sensitivity-uncertainty periods per DOE O 435.1 and DOE M 435.1. This analysis does not consider radionuclide release during facility operations, only the post-closure impacts of the radionuclides to the environment. The evaluation of potential radiological dose to groundwater receptors caused by releases from a closed facility containing radioactive waste typically includes the following: (1) Release of radionuclides from that facility (2) Transport of those radionuclides through the environment, and (3) Exposure to humans to environmental concentration levels of those radionuclides The fate and transport three-dimensional (3D) model analysis involves the post-closure impacts to the environment of the technetium-99, iodone-129, and uranium (all isotopes in the waste). The residual inventory estimates include several radionuclides, but technetium-99 is typically responsible for almost all of the beta-gamma dose equivalent associated with groundwater (water resources) protection per 40 CFR 141, “National Primary Drinking Water Regulations” (e.g., see the results in WCH-520, Performance Assessment of Environmental Restoration Disposal Facility, Hanford Site, Washington; hereinafter referred to as the ERDF PA), and iodone-129 can also be a significant dose contributor for some waste (e.g., RPP-RPT-59958, Performance Assessment for the Integrated Disposal Facility, Hanford Site, Washington; hereinafter referred to as the IDF PA). Uranium does not typically factor significantly into the impacts to groundwater, even during the 10,000-year sensitivity-uncertainty period, but always remains of interest as a contaminant. This ECF does not address vadose and saturated zone modeling for Trench 94 of the 200 East Area LLBG. Current information confirms the validity of the low corrosion rate of the naval reactor plant carbon steel (HY-80), and the even lower corrosion rate of the nickel-iron-chromium alloy reactor vessel (Inconel Alloy 600) presented in DOE/EIS-0259, Final Environmental Impact Statement on the Disposal of Decommissioned, Defueled Cruiser, Ohio Class, and Los Angeles Class Naval Reactor Plants. Based on these low corrosion rates, the time to breach the reactor vessel to allow release of radionuclides from the activated metal of the reactor vessel internal structure is at least 10,000 years. This time to breach precludes the need to evaluate the vadose and saturated zone transport of contaminants released from the reactor compartment disposal packages in the 200 East Area LLBGs PA (CP-63826, Waste Release Model Package Report for the Active Trenches of the Low-Level Burial Grounds, Hanford Site, Washington).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Representativity error scaling of models of the high temperature test facility

Error scaling is a critical step toward the validation of modeling capabilities for high-temperature gas-cooled reactors (HTGRs). Extensive effort is being made to bring HTGRs into the validation basis of numerous thermal-hydraulics codes. Here, this paper demonstrates how systems-level codes can be leveraged to perform error scaling analyses between an experimental facility and a plant-to-be facility. Specifically, we focus on two conduction cooldown experiments from the High Temperature Test Facility (HTTF) and the General Atomics 350 MW th modular high-temperature gas-cooled reactor (MHTGR-350). The error scaling methodology employed in this study is representativity, which in the context of this work was used to quantify how well experiments captured the physics of the plant facility by comparing sensitivity vectors between the two facilities. In addition, two different RELAP5–3D models of the HTTF were included in the comparison to determine if modeling methodologies notably impact the representativity results. The key figures of merit are the maximum block temperature and the coolant outlet temperature. The time-dependent maximum block temperature had a low representativity of below 0.1 for both models across both transients. The coolant outlet temperature had a higher representativity of around 0.6 for both models during the pressurized conduction cooldown, but it was below 0.2 for the depressurized conduction cooldown. Overall, the HTTF experiments were not representative of the transients in the MHTGR-350. However, these results can play a significant role in informing future potential experiments for HTGR systems that iterate on what the HTTF accomplished.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

A generalized massively parallel ultra-high order FFT-based Maxwell solver

Dispersion-free ultra-high order FFT-based Maxwell solvers have recently proven to be paramount to a large range of applications, including the high-fidelity modeling of high-intensity laser–matter interactions with Particle-In-Cell (PIC) codes. To enable a massively parallel scaling of these solvers, a novel parallelization technique was recently proposed, which consists in splitting the simulation domain into several processor sub-domains, with guard regions appended at each sub-domain boundary. Maxwell's equations are advanced independently on each sub-domain using local shared-memory FFTs (instead of a single distributed global FFT). This implies small truncation errors at sub-domain boundaries, the amplitude of which depends on guard regions sizes and order of the Maxwell solver. For moderate guard region sizes, this ’local’ technique proved to be highly scalable on up to a million cores and notably enabled the 3D modeling of so-called plasma mirrors, for which 8 guard cells only were enough to prevent truncation error growth. Yet, for other applications, the required number of guard cells might be much higher, which would severely limit the parallel efficiency of this technique due to the large volume of guard cells to be exchanged between sub-domains. In this context, we propose a novel parallelization technique that ensures very good scaling of FFT-based solvers with an arbitrarily high number of guard cells. Our ’hybrid’ technique consists in performing distributed FFTs on local groups of processors with guard regions now appended to boundaries of each group of processors. It uses a dual domain decomposition method for the Maxwell solver and other parts of the PIC cycle to keep the simulation load-balanced. This ’hybrid’ technique was implemented in the open source exascale library PICSAR. Benchmarks show that for a large number of guard cells (>16), the ’hybrid’ technique offers up to ×3 speed-up and ×8 memory savings compared to the ’local’ one.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗