Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Experimental Characterization and Modeling of High Hole Mobility GeSn Quantum Wells: The Role of Alloy Disorder Scattering

Understanding mechanisms influencing electrical transport in material systems not only provides a scientific explanation for observed behavior but also offers insight into ways to enhance transport in devices. This study reports experimental hole mobility of 8 x 10 4 cm 2 V -1 s -1 in a Ge 0.92 Sn 0.08 , the highest recorded mobility for the GeSn system. A study of the material's quality is presented using structural and electrical characterization techniques, with transport data being supported by simulations using an extensive modeling framework. Quantum Hall measurements further indicate the material's high quality and potential spintronic applications, with extracted values of 0.0689$m$ 0 and 13.6 for the effective mass and effective g‐factor, respectively. It is observed that transport is limited by alloy disorder scattering at cryogenic temperatures. A comparative study between the presented structure and similar quantum well heterostructures revealed that the difference in hole mobilities is captured by a disparity in the reduced nominal alloy disorder scattering potential (Δ U alloy = 0.8 eV), that is lower than the value of a fully random alloy (Δ U alloy = 1.4–1.7 eV) potential. The difference in Δ U alloy suggests that heterostructures with similar geometries and alloy compositions can have different alloy disorder scattering, implying that an underlying mechanism, such as short‐range order, may be responsible and warrants further investigation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global largest EV market with 1.2 million EVs sold in 2018. This study established a novel life cycle energy use and emission inventory collecting up-to-date data including the electricity generation mix, emission controls in the power and industrial sectors, and the energy use in the fuel transport to estimate the well-to-wheels (WTW) greenhouse gas (GHG), and air pollutant emissions for battery electric vehicles (BEVs) and gasoline passenger vehicles in China. The results show that an average BEV has 35% lower WTW GHG emissions than an average gasoline car. BEVs reduce volatile organic compounds (VOCs) and nitrogen oxides (NOX) emissions by 98% and 34%, respectively, but have comparable or slightly higher primary fine particulate matter (PM2.5) and sulfur dioxide (SO2) emissions. Compact and small-size vehicles generally have lower GHG and air pollutant emissions than mid- and large-size vehicles. Class A vehicles contribute the most in the absolute amount of GHG and air pollutant emissions and therefore have the biggest potential for emission reduction. Our results suggest that global policymakers should continue to promote the transition to clean power sources, emission control, and fuel economy regulations, which are critical to enhancing emission mitigation benefits of BEVs. We also suggest EV development strategies should be formulated targeting vehicle class with the biggest emission mitigation potentials.

Air pollutant emissions↗
DOE OSTI2022

Well-Balanced Second-Order Convex Limiting Technique for Solving the Serre–Green–Naghdi Equations

In this article, we introduce a numerical method for approximating the dispersive Serre–Green–Naghdi equations with topography using continuous finite elements. The method is an extension of the hyperbolic relaxation technique introduced in Guermond et al. (J Comput Phys 450:110809, 2022). It is explicit, second-order accurate in space, third-order accurate in time, and is invariant-domain preserving. It is also well balanced and parameter free. Special attention is given to the convex limiting technique when physical source terms are added in the equations. The method is verified with academic benchmarks and validated by comparison with laboratory experimental data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Alteration of Fractured Foamed Cement Exposed to CO2-Saturated Water: Implications for Well Integrity

Geologic CO2 storage (GCS) is a method to mitigate the adverse impact of global climate change. Potential leakage of CO2 from fractured cement at the wellbore poses a risk to the feasibility of GCS. Foamed cement is widely applied in deepwater wells where fragile geologic formations cannot support the weight of conventional cement. Thus, it is critical to know whether fractures in foamed cement self-seal in a similar manner as conventional cement systems. This study is the first to investigate the changes in physical and chemical attributes of foamed cement under dynamic flow conditions using CO2-saturated water. Self-sealing of fractures in the cement was observed at a solution flow rate of 0.1 mL/min and a pressure of 6.9 MPa. The formation of CaCO3 precipitates in pore spaces and fractures led to a decrease in permeability by 1 order of magnitude. The extents of self-sealing in foamed cement samples, specifically the 20 and 30% air volume formulations, were similar to that of conventional cements. We attribute this to the greater alteration depth in the foamed cement, which compensated for the reduced availability of Portlandite and higher initial porosity. The results can be used to evaluate the risk of leakage associated with foamed cement.

Geologcial Carbon Storage, Well Integrity in CO2 S↗
DOE OSTI2021

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe 1- x S x /CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe 1- x S x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm 2 ) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lead-Free Organic–Perovskite Hybrid Quantum Wells for Highly Stable Light-Emitting Diodes

Two-dimensional perovskites that could be regarded as natural organic-inorganic hybrid quantum wells (HQWs) are promising for light-emitting diode (LED) applications. High photoluminescence quantum efficiencies (approaching 80%) and extremely narrow emission bandwidth (less than 20 nm) have been demonstrated in their single crystals; however, a reliable electrically driven LED device has not been realized owing to inefficient charge injection and extremely poor stability. Furthermore, the use of toxic lead raises concerns. Here, we report Sn(II)-based organic-perovskite HQWs employing molecularly tailored organic semiconducting barrier layers for efficient and stable LEDs. Utilizing femtosecond transient absorption spectroscopy, we demonstrate the energy transfer from organic barrier to inorganic perovskite emitter occurs faster than the intramolecular charge transfer in the organic layer. Consequently, this process allows efficient conversion of lower-energy emission associated with the organic layer into higher-energy emission from the perovskite layer. Thus, this greatly broadened the candidate pool for the organic layer. Incorporating a bulky small bandgap organic barrier in the HQW, charge transport is enhanced and ion migration is greatly suppressed. We demonstrate a HQW-LED device with pure red emission, a maximum luminance of 3466 cd m -2 , a peak external quantum efficiency up to 3.33%, and an operational stability of over 150 h, which are significantly better than previously reported lead-free perovskite LEDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hot-carrier dynamics in InAs/AlAsSb multiple-quantum wells

A type-II InAs/AlAs 0.16 Sb 0.84 multiple-quantum well sample is investigated for the photoexcited carrier dynamics as a function of excitation photon energy and lattice temperature. Time-resolved measurements are performed using a near-infrared pump pulse, with photon energies near to and above the band gap, probed with a terahertz probe pulse. The transient terahertz absorption is characterized by a multi-rise, multi-decay function that captures long-lived decay times and a metastable state for an excess-photon energy of >100 meV. For sufficient excess-photon energy, excitation of the metastable state is followed by a transition to the long-lived states. Excitation dependence of the long-lived states map onto a nearly-direct band gap (E g ) density of states with an Urbach tail below E g . As temperature increases, the long-lived decay times increase < E g , due to the increased phonon interaction of the unintentional defect states, and by phonon stabilization of the hot carriers > E g . Additionally, Auger (and/or trap-assisted Auger) scattering above the onset of the plateau may also contribute to longer hot-carrier lifetimes. Meanwhile, the initial decay component shows strong dependence on excitation energy and temperature, reflecting the complicated initial transfer of energy between valence-band and defect states, indicating methods to further prolong hot carriers for technological applications.

14 SOLAR ENERGY↗
DOE OSTI2021

Strong interlayer charge transfer due to exciton condensation in an electrically isolated GaAs quantum well bilayer

We introduce a design of electrically isolated “floating” bilayer GaAs quantum wells (QW), in which application of a large gating voltage controllably and highly reproducibly induces charges that remain trapped in the bilayer after removal of the gating voltage. At smaller gate voltages, the bilayer is fully electrically isolated from external electrodes by thick insulating barriers. This design permits full control of the total and differential densities of two coupled 2D electron systems. The floating bilayer design provides a unique approach for studying systems inaccessible by simple transport measurements. It also provides the ability to measure the charge transfer between the layers, even when the in-plane resistivities of the 2D systems diverge. We measure the capacitance and inter-layer tunneling spectra of the QW bilayer with independent control of the top and bottom layer electron densities. Our measurements display strongly enhanced inter-layer tunneling current at v T =1, a signature of exciton condensation of a strongly interlayer-correlated bilayer system. With fully tunable densities of individual layers, the floating bilayer QW system provides a versatile platform to access previously unavailable information on the quantum phases in electron bilayer systems.

42 ENGINEERING↗
DOE OSTI2022

Demonstration of yellow (568 nm) stimulated emission from optically pumped InGaN/GaN multi-quantum wells

We demonstrate room-temperature stimulated emission at 568 nm from low dislocation density InGaN/GaN multi-quantum wells. For a 1.4 mm long and a 50 $μ$4m wide ridge bar optically pumped by a high-power pulsed laser, we observed an emission peak at 568 nm with a narrow spectral width of less than 2 nm at room temperature. The measured pumping threshold is less than 1.5 MW/cm 2 , and the polarization ratio of the emission is over 90%. In conclusion, this demonstration paves the way for the future development of electrically injected InGaN semiconductor yellow laser diodes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optically thick GaInAs/GaAsP strain-balanced quantum-well tandem solar cells with 29.2% efficiency under the AM0 space spectrum

GaAs is often used as a multijunction subcell due to its high material quality on GaAs substrates, despite having a non-optimal bandgap. The bandgap can be beneficially reduced using many layers of thin, strain-balanced GaInAs in a superlattice or quantum well device, but achieving excellent carrier collection without increased recombination has proven challenging. Here, we develop and demonstrate high performance, optically thick GaInAs/GaAsP strain-balanced solar cells. Excellent material quality is achieved in thick superlattices by using growth conditions that limit progressive thickness and composition fluctuations. Bandgap-voltage offsets as low as 0.31V are shown in superlattice cells using thin, highly strained GaP barriers. Optically thick superlattice cells with over 2500 nm of total GaInAs in the depletion region are developed, enabling 3.8 mA/cm 2 of extra photocurrent beyond the GaAs band edge under the AM0 space spectrum. Optimized superlattice solar cells are incorporated into two-junction devices that achieve 29.2% efficiency under the AM0 space spectrum due to their improved bandgap combination and high subcell voltages.

14 SOLAR ENERGY↗
DOE OSTI2023

Low-efficiency-droop c -plane InGaN/GaN light-emitting diodes through the use of thick single quantum wells and doped barriers

Efficiency droop at high current densities is a problem for InGaN-based light-emitting diodes (LEDs), especially for conventional c-plane devices. The large internal electric fields in c-plane quantum wells (QWs) lead to an increase in the active region carrier density (n), causing the electrical efficiency droop onset to occur at low current densities. Here, we present an approach to reduce the internal electric fields (Eint) in c-plane QWs by placing doped p-type and n-type GaN barriers close to the QW. The reduced Eint also allows a thick QW active region design, which helps to lower n to further reduce the droop. The concept of using doped barriers to control Eint is explained using theory and device simulations. Following that, multiple series of thick single QW (SQW) LEDs were grown and characterized. Key parameters in the epitaxial design such as the doping levels and the relative position of the doped barriers were systematically studied and optimized. In conclusion, by using optimized doped barriers and a thick SQW, c-plane LEDs with a low-efficiency droop of 14% at 300 A/cm2 [with respect to the peak external quantum efficiency (EQE)] and a high peak EQE of 49% were demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Carrier diffusion in long wavelength InGaN quantum well LEDs after injection through V-defects

The efficiency of operation of GaN-based light emitting diodes (LEDs) to a large degree relies on realization of a uniform hole distribution between multiple quantum wells (QWs) of the active region. Since the direct thermionic transport between the QWs is inefficient, the hole injection through semipolar {$10\bar{1}1$} QWs that form on the facets of V-defects has been suggested as an alternative approach. However, for an efficient LED operation, the carrier distribution should be uniform not only vertically, between the QWs but also laterally, within individual QWs. In this work, the lateral carrier distribution in long wavelength InGaN/GaN QW LEDs is studied by the scanning near-field optical microscopy. The measurements have shown that emission is concentrated around the V-defect injectors. At high currents, the diffusion length of holes in polar QWs was found to be ∼0.6–1 μm and the hole diffusion coefficient ∼0.6 cm 2 /s. The obtained data should aid design of the V-defect injectors for a laterally uniform carrier distribution in the active region QWs.

Current crowding↗
DOE OSTI2020

Superluminescent diodes in the spectral range of 1.5 – 1.6 μm based on strain-compensated AlGaInAs/InP quantum wells

Superluminescent diodes based on AlGaInAs/InP separate-confinement double heterostructures with strain-compensated quantum wells are investigated. The influence of elastic strains in the active region on the output characteristics of the devices is analysed. It is shown that such a design of a superluminescent diode allows an optical power of more than 5 mW, a radiation spectrum width of more than 60 nm, a degree of output radiation polarisation up to 30 dB to be obtained at the output of a single-mode fibre, and has a great potential for further improvement. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Modeling electron transfer from the barrier in InAs/GaAs quantum dot-well structure

We study single electron tunnelling from the barrier in the binary InAs/GaAs quantum structure including quantum well (QW) and quantum dot (QD). The tunneling is described in the terms of localized/delocalized states and their spectral distribution. The modeling is performed by using the phenomenological effective potential approach for InAs/GaAs heterostructures. The results for the two and three-dimensional models are presented. We focus on the effect of QD-QW geometry variations. The relation to the PL experiments is shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Impact of Alloy-Disorder-Induced Localization on Hole Diffusion in Highly Excited c -Plane and m -Plane (In, Ga) N Quantum Wells

The diffusion coefficient of holes can provide knowledge about carrier localization in (In, Ga)N, where the carrier dynamics are altered by randomly fluctuating potential landscape. In group-III nitrides, the diffusivity of holes is difficult to measure by electrical methods but it can be studied using optical techniques. Here, we investigate the dependence of the hole diffusion coefficient on direction and carrier density in c-plane and m-plane (In, Ga)N structures by employing the light-induced transient-grating technique. We show that the hole diffusion coefficient is anisotropic in the m-plane structure, where it is several times larger along the a crystallographic direction than along the c direction. Such anisotropy is observed within the broad range of carrier densities from 10 18 to 10 20 cm –3 . The diffusivity changes nonmonotonously with increasing photoexcitation, this dependence being different in thick and thin layers. We argue that an unexpectedly high diffusion coefficient at low carrier densities in thick quantum wells can be a signature of efficient hole transport via percolative paths occurring due to compositional disorder. In turn, a decrease of diffusivity with the excitation can reflect the effect of Coulomb blockade of these paths. Lastly, we demonstrate that disorder impacts carrier diffusivity even at carrier densities above 10 19 cm –3 , where the overflow of localized states must be included to explain the observed increase of the diffusion coefficient with the carrier density.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Valley splittings in Si/SiGe quantum dots with a germanium spike in the silicon well

Silicon-germanium heterostructures have successfully hosted quantum dot qubits, but the intrinsic near-degeneracy of the two lowest valley states poses an obstacle to high-fidelity quantum computing. Here we present a modification to the Si/SiGe heterostructure by the inclusion of a spike in germanium concentration within the quantum well in order to increase the valley splitting. The heterostructure is grown by chemical vapor deposition and magnetospectroscopy is performed on gate-defined quantum dots to measure the excited state spectrum. We demonstrate a large and widely tunable valley splitting as a function of applied vertical electric field and lateral dot confinement. We further investigate the role of the germanium spike by means of tight-binding simulations in single-electron dots and show a robust doubling of the valley splitting when the spike is present, as compared to a standard (spike-free) heterostructure. This doubling effect is nearly independent of the electric field, germanium content of the spike, and spike location. This experimental evidence of a stable, tunable quantum dot, despite a drastic change to the heterostructure, provides a foundation for future heterostructure modifications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Bi-fidelity Gradient-Based Approach for Nonlinear Well Logging Inverse Problems

Solving a non-linear inverse problem is challenging in computational science and engineering. Sampling based methods require a large number of model valuations; gradientbased methods require fewer model evaluations but only find the local minima. Multifidelity optimization combines the low fidelity model and the high-fidelity model to achieve both high accuracy and high efficiency. In this paper, we present a bi-fidelity approach to solve non-linear inverse problems. In the bi-fidelity inversion method, the low-fidelity model is used to acquire a good initial guess, and the high-fidelity model is used to locate the global minimum. Combined with a multi-start optimization scheme, the proposed approach significantly increases the possibility of finding the global minimum for nonlinear inverse problems with many local minima. The method is tested with two toy problems and then applied to an electromagnetic well logging inverse problem, which is difficult to solve using traditional gradient-based methods. The bi-fidelity method provides promising inversion results and can be easily applied to traditional gradient-based methods.

42 ENGINEERING↗
DOE OSTI2023

Monolithically Integrated $\varepsilon$-Ge/In x Ga 1-x As Quantum Well Laser Design: Experimental and Theoretical Investigation

Here, we have analyzed the electrical and optical phenomenon occurring in a $\varepsilon$-Ge/In x Ga 1-x -Ge/In x Ga 1-x As quantum well (QW) laser through self-consistent physical solvers calibrated using in-house experimental results. A separate confinement heterostructure QW design is proposed to enable lasing from tensile strained germanium ($\varepsilon$-Ge/In x Ga 1-x -Ge) in the range of 1.55 um to 4 um wavelengths as a function of QW thickness and indium (In) composition. Different recombination mechanisms were analyzed as a function of tensile strain in $\varepsilon$-Ge/In x Ga 1-x -Ge QW. Minority carrier lifetime and band alignment are key attributes of a QW laser, which were measured using microwave photoconductive decay and x-ray photoelectron spectroscopy (as a function of In composition), respectively. The transition point of Ge to a direct bandgap material is re-affirmed to be at $\varepsilon$-Ge/In x Ga 1-x = 1.6% (In ~24%) and the transition from type I to type II for $\varepsilon$-Ge/In x Ga 1-x -Ge/In x Ga 1-x As QW is found to be at In ~55%. Also, the transition to a TM mode dominant laser is identified at In ~15%. Using a tunable waveguide design to optimize confinement as a function of In composition, strain, wavelength, QW thickness, refractive index, and geometry, the $\varepsilon$-Ge/In x Ga 1-x -Ge QW laser design provided a net material gain of ~2000 cm -1 and a threshold current density of ~5 kA/cm 2 , which is an improvement over existing Ge based lasers. In conclusion, the impact of In composition and QW thickness on the band structure, polarized gain spectra, and various lasing metrics were analyzed to show $\varepsilon$-Ge/In x Ga 1-x -Ge/InGaAs QW lasers as promising for integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗