Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Simulations of detonation wave propagation in rectangular ducts using a three-dimensional WENO scheme

This paper reports high resolution simulations using a fifth-order weighted essentially non-oscillatory (WENO) scheme with a third-order TVD Runge-Kutta time stepping method to examine the features of detonation front and physics in square ducts. The simulations suggest that two and three-dimensional detonation wave front formations are greatly enhanced by the presence of transverse waves. The motion of transverse waves generates triple points (zones of high pressure and large velocity coupled together), which cause the detonation front to become locally overdriven and thus form ''hot spots.'' The transversal motion of these hot spots maintains the detonation to continuously occur along the whole front in two and three dimensions. The present simulations indicate that the influence of the transverse waves on detonation is more profound in three dimensions and the pattern of quasi-steady detonation fronts also depends on the duct size. For a ''narrow'' duct (4L x 4L where L is the half-reaction length), the detonation front displays a distinctive ''spinning'' motion about the axial direction with a well-defined period. For a wider duct (20L x 20L), the detonation front exhibits a ''rectangular mode'' periodically, with the front displaying ''convex'' and ''concave'' shapes one following the other and the transverse waves on the four walls being partly out-of-phase with each other. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observations of nonlinear interactions in directionally spread shoaling surface gravity waves

Shoaling wave fields generated in laboratory experiments were analyzed to determine the sensitivity of nonlinear interactions to the directional distributions of incident waves. Peaks in the directional spectra observed in shallow water were consistent with near resonating, quadratic interactions between two primary waves transferring energy to a third wave with the sum frequency and vector sum wavenumber of the primary waves. Directionally colinear waves forced a higher-frequency wave propagating in the same direction as the primary waves, while directionally spread (i.e., noncolinear) primary waves forced a higher-frequency wave that propagated in a direction between those of the interacting primary waves. Deepwater wave fields with similar frequency spectra but different directional spectra evolved to different shallow-water directional spectra, yet their shallow-water frequency spectra were remarkably similar. This result suggests that the shape of the directional spectrum of the incident wave field has only a small effect on the magnitudes of nonlinear energy transfer during shoaling. The principal effect of directionality in the incident wave field is on the directions, not the amplitudes, of the nonlinearly generated waves. The laboratory data demonstrate clearly the importance of triad interactions between noncolinear and colinear shoaling waves.

Elgar, Steve↗

Prospects for direct detection of inflationary gravitational waves by next generation interferometric detectors

We study the potential impact of detecting the inflationary gravitational wave background by the future space-based gravitational wave detectors, such as DECIGO and BBO. The signal-to-noise ratio of each experiment is calculated for chaotic/natural/hybrid inflation models by using the precise predictions of the gravitational wave spectrum based on numerical calculations. We investigate the dependence of each inflation model on the reheating temperature which influences the amplitude and shape of the spectrum, and find that the gravitational waves could be detected for chaotic/natural inflation models with high reheating temperature. From the detection of the gravitational waves, a lower bound on the reheating temperature could be obtained. The implications of this lower bound on the reheating temperature for particle physics are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectroscopy of the Perseus Cluster

We present preliminary results of a XMM-Newton 50 ks observation of the Perseus Cluster that provides an unprecedented view of the central 0.5 Mpc region. The projected gas temperature declines smoothly by a factor of 2 from a maximum value of approx. 7 keV in the outer regions to just above 3 keV at the cluster center. Over this same range, the heavy-element abundance rises slowly from 0.4 to 0.5 solar as the radius decreases from 14 ft. to 5 ft., and then it rises to a peak of almost 0.7 solar at 1&farcm;25 before declining to 0.4 at the center. Th global east-west asymmetry of the gas temperature and surface brightness distributions, approximately aligned with the chain of bright galaxies, suggests an ongoing merger, although the modest degree of the observed asymmetry certainly excludes a major merger interpretation. The chain of galaxies probably traces the filament along which accretion started some time ago and is continuing at the present time. A cold and dense (low-entropy) cluster core like Perseus is probably well "protected" against the penetration of the gas of infalling groups and poor clusters, whereas in non-cooling core clusters such as Coma and A1367, infalling subclusters can penetrate deeply into the core region. In Perseus, gas associated with infalling groups may be stripped completely at the outskirts of the main cluster and only compression waves (shocks) may reach the central regions. We argue, and show supporting simulations, that the passage of such a wave(s) can qualitatively explain the overall horseshoe shaped appearance of the gas temperature map (the hot horseshoe surrounds the colder, low-entropy core) as well as other features of the Perseus Cluster core. These simulations also show that as compression waves traverse the cluster core, they can induce oscillatory motion of the cluster gas that can generate multiple sharp "edges" on opposite sides of the central galaxy. Gas motions induced by mergers may be a natural way to explain the high frequency of "edges" seen in clusters with cooling cores.

Jones, Christine↗

Observation of Scale Invariance in Two-Dimensional Matter-Wave Townes Solitons

We report near-deterministic generation of two-dimensional (2D) matter-wave Townes solitons, and a precision test on scale invariance in attractive 2D Boses gases. We induce a shape-controlled modulational instability in an elongated 2D matter-wave to create an array of isolated solitary waves of various sizes and peak densities. We confirm scale invariance by observing the collapse of solitary-wave density profiles onto a single curve in a dimensionless coordinate rescaled according to their peak densities, and observe that the scale-invariant profiles measured at different coupling constants can further collapse onto the universal profile of Townes solitons. The reported scaling behavior is tested with a nearly 60-fold difference in soliton interaction energies, and allows us to discuss the impact of a non-negligible magnetic dipole-dipole interaction (MDDI) on 2D scale invariance. Here, we confirm that the effect of MDDI in our alkali cesium quasi-2D samples effectively conforms to the same scaling law governed by a contact interaction to well within our experiment uncertainty.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A solitary wave theory of the Great Red Spot and other observed features in the Jovian atmosphere

It is shown that solitary waves in a planetary zonal shear have a shape and flow field that are virtually identical to those observed around the Red Spot and numerous other features that have been seen in the Jovian atmosphere. It is suggested that the theoretically calculated interaction between solitary waves has many characteristics in common with the observed interactions between these same Jovian features, and available atmospheric models are shown to be consistent with the very restrictive requirements of the theory.

Maxworthy, T.↗

A special method for finding body distortions that reduce the wave drag of wing and body combinations at supersonic speeds

For a given wing and supersonic Mach number, the problem of shaping an adjoining fuselage so that the combination will have a low wave drag is considered. Only fuselages that can be simulated by singularities (multipoles) distributed along the body axis are studied. However, the optimum variations of such singularities are completely specified in terms of the given wing geometry. An application is made to an elliptic wing having a biconvex section, a thickness-chord ratio equal to 0.05 at the root, and an aspect ratio equal to 3. A comparison of the theoretical results with a wind-tunnel experiment is also presented.

Lomax, Harvard↗

Experimental investigation of supersonic flow past double-wedge configurations

Viscous-inviscid interactions characteristic of those which occur when the fuselage-generated shock wave interacts with the wing-generated shock wave of a shuttle orbiter were studied experimentally. Surface-pressure measurements and schlieren photographs were obtained to define the flowfield generated when a Mach 4.97 stream encounters a double-wedge configuration. The deflection angles for the two wedge surfaces were such that the shock interaction pattern was either a Type-V pattern or a Type-VI pattern, as defined by Edney. The correlation between the present data and the theoretical solution for the Type-VI solution is satisfactory. The correlation between the measured Type-V shock-interaction pattern and the theoretical solution is satisfactory up to the interaction region. Downstream of the interaction the Type-V data depend primarily on the shape of the leading-edge shock wave.

Bertin, J. J.↗

Equilibrium shapes of acoustically levitated drops

The quantitative determination of the shape of liquid drops levitated in an ultrasonic standing wave has provided experimental data on the radiation pressure-induced deformations of freely suspended liquids. Within the limits of small deviations from the spherical shape and small drop diameter relative to the acoustic wavelength, an existing approximate theory yields a good agreement with experimental evidence. The data were obtained for millimeter and submillimeter drops levitated in air under 1 g, where g is the sea level gravitational acceleration.

Trinh, E. H.↗

An optical technique for examining aircraft shock wave structures in flight

The detailed properties of sonic booms have to be better understood before commercial, next generation, supersonic and hypersonic aircraft can be properly developed. Experimental tests and measurements are needed to help sort the physical details of the flows at realistic test conditions. Some of these tests can be made in wind tunnels, but the need for full flight conditions simulation, the problem of tunnel wall interference, and the short distance the shocks can be examined from the aircraft, limit the usefulness of wind tunnel tests. Previous measurement techniques for examining the flow field of aircraft in flight have included pressure measurements on the aircraft, ground based pressure measurements, and flow field measurements made with chase aircraft. Obtaining data with chase planes is a slow and difficult process, and is limited in how close it can be obtained to the test aircraft. A need clearly existed for a better technique to examine the shock structure from the plane to large distances from the plane. A new technique has been recently developed to obtain schlieren photographs of aircraft in flight (SAF). Preliminary results have been obtained, and the technique holds promise as a tool to study the shape and approximate strength of the shock wave structure around the test aircraft, and examine shock wave details all the way from the aircraft to near the ground. The current paper describes this approach, and gives some preliminary test results.

Weinstein, Leonard M.↗

Full quantum mechanical analysis of atomic three-grating Mach–Zehnder interferometry

Atomic three-grating Mach–Zehnder interferometry constitutes an important tool to probe fundamental aspects of the quantum theory. There is, however, a remarkable gap in the literature between the oversimplified models and robust numerical simulations considered to describe the corresponding experiments. Consequently, the former usually lead to paradoxical scenarios, such as the wave–particle dual behavior of atoms, while the latter make difficult the data analysis in simple terms. Here these issues are tackled by means of a simple grating working model consisting of evenly-spaced Gaussian slits. As is shown, this model suffices to explore and explain such experiments both analytically and numerically, giving a good account of the full atomic journey inside the interferometer, and hence contributing to make less mystic the physics involved. More specifically, it provides a clear and unambiguous picture of the wavefront splitting that takes place inside the interferometer, illustrating how the momentum along each emerging diffraction order is well defined even though the wave function itself still displays a rather complex shape. To this end, the local transverse momentum is also introduced in this context as a reliable analytical tool. The splitting, apart from being a key issue to understand atomic Mach–Zehnder interferometry, also demonstrates at a fundamental level how wave and particle aspects are always present in the experiment, without incurring in any contradiction or interpretive paradox. On the other hand, at a practical level, the generality and versatility of the model and methodology presented, makes them suitable to attack analogous problems in a simple manner after a convenient tuning. - Highlights: • A simple model is proposed to analyze experiments based on atomic Mach–Zehnder interferometry. • The model can be easily handled both analytically and computationally. • A theoretical analysis based on the combination of the position and momentum representations is considered. • Wave and particle aspects are shown to coexist within the same experiment, thus removing the old wave-corpuscle dichotomy. • A good agreement between numerical simulations and experimental data is found without appealing to best-fit procedures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Passage of a weak vortex sheet through an oblique shock

The two-dimensional problem of the passage of a free vortex sheet of weak strength through an oblique shock wave of finite strength is investigated. Conditions are established which define the changes of the strength and shape of the vortex sheet after its passage through the shock wave in terms of the shock strength and the angle between the shock wave and the vortex sheet.

Ting, L.↗

Effects of spatial transport and ambient wave intensity on the generation of MHD waves by interstellar pickup protons

Intense MHD waves generated by the isotropization of interstellar pickup protons were predicted by Lee and Ip (1987) to appear in the solar wind whenever pickup proton fluxes were high enough. However, in reality these waves have proved surprisingly difficult to identify, even in the presence of observed pickup protons. We investigate the wave excitation by isotropization from an initially broad pitch-angle distribution instead of the narrow ring-beam assumed by Lee and Ip. The pitch angle of a newly-ionized proton is given by theta(sub o), the angle between the magnetic field (averaged over a pickup proton gyroradius) and the solar wind flow at the time of ionization. Then, a broadened distribution results from spatial transport of pickup protons prior to isotropization from regions upstream along the field containing different values of theta(sub o). The value of theta(sub o) will vary as a result of the ambient long-wavelength fluctuations in the solar wind. Thus, the range of initial pitch-angles is directly related to the amplitude of these fluctuations within a length-scale determined by the isotropization time. We show that a broad initial pitch-angle distribution can significantly modify the intensity and shape of the pickup-proton-generated wave spectrum, and we derive a criterion for the presence of observable pickup-proton generated waves given the intensity of the ambient long wavelength fluctuations.

Isenberg, P. A.↗

Note: Synchronous energy extraction through four output ports of microwave compressor

The energy stored in a resonant cavity was extracted through four output ports and added in phase in a common line. Operation of a single switch provided synchronism and the power portions transmitted through the ports were combined in a waveguide turnstile junction. Estimation shows that the compressor peak power can reach a value eight times as much as the switched wave power, provided the output pulsewidth is shortened by the same factor with reference to the cavity double transit time. The performance of the X-band compressor prototype was investigated. Signals radiated through each of four output ports had identical envelope shapes and equal peak power values. The reflected wave did not accompany the power combining. The pulses of 1.2 MW peak power and 1.6 ns pulse width were obtained when the compressor was driven by the 50 kW pulse power magnetron generator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Alfvén wave propagation through a moderate-amplitude transverse inhomogeneity in a magnetized plasma

Parallel propagation of a plane Alfvén wave in a moderate-amplitude Gaussian-shaped transverse inhomogeneity is studied numerically using a fluid model retaining low-frequency kinetic effects. It is shown that in such a situation, common in the solar wind where elongated pressure-balanced structures are frequently observed, phase mixing competes with wave focusing, in contrast with coronal loops or auroral regions where sharp gradients present at the edges of the inhomogeneities make phase mixing dominant. Some understanding about this competition is provided by a model based on an envelope formalism. Depending on the magnitude of the Alfvén wavelength and of the inhomogeneity transverse scale relative to the ion inertial length, various regimes can develop, ranging from the formation of localized gradients when phase mixing dominates to the development of an intense magnetic filament when focusing is stronger, with a different efficiency for the generation of magnetosonic and kinetic Alfvén waves. Electron parallel heating and parallel electric field generation are also briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of plasma microfields on radiative transitions from atomic levels above the ionization threshold

The effects of plasma electric microfields on line-like optical features arising from atomic levels above the ionization threshold are investigated within the framework of the quasi-static and single-frequency dynamic-field theories of spectral-line broadening. The 2p(23)P to 1s2p(3)P and 2s2p(3)P to 1s2s(3)S transitions in helium and helium-like ions are treated as examples. The mixing of the doubly excited levels in the perturbing microfields produces Stark broadening of the emission lines and induces autoionization of the 2p(23)P level, which, unlike the 2s2p(3)P level, is metastable against autoionization in the field-free environment. Determination of the complete Stark-broadening profiles in thermal plasmas is complicated by the need to include the effects of both the (quasi-static) ion and the (dynamic) electron fields. Under nonequilibrium conditions, where electric fields from either electron or ion plasma waves can far exceed nearby particle fields, the calculation and interpretation of the line shapes may be simplified and could provide a diagnostic probe of the wave-field properties.

Davis, J.↗

Reference Model 6 Cost Breakdown (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM6 device and multiple unit arrays. These spreadsheets are contained within an XLSX file and a spreadsheet editor such as Microsoft Excel is needed to open the file. This data was generated upon completion of the project on September 30, 2014. The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting. Reference Model 6 (RM6) is a Backward Bent Duct Buoy (BBDB), which is a type of oscillating water column wave energy converter. First proposed by Masuda, the BBDB design is a floating Oscillating Water Column (OWC) device that consists of an air chamber, an L-shaped duct, bow and stern buoyancy modules, and a power take-off (PTO) composed of a Wells air turbine and a generator. This L- shaped device opens to the ocean downstream from the wave propagation direction. Power is produced by the motion of the wave, which causes the ambient pressure in the air chamber to vary thereby forcing air to flow through the Wells turbine. The reference wave energy resource for RM6 was developed from site information collected near Eureka, in Humboldt County, California.

16 TIDAL AND WAVE POWER↗