Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vacuum electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Revisiting Artifacts of Kohn–Sham Density Functionals for Biosimulation

We revisit the problem of unphysical charge density delocalization/fractionalization induced by the self-interaction error of common approximate Kohn–Sham (KS) density functional theory functionals on simulation of small to medium-sized proteins in a vacuum. Aside from producing unphysical electron densities and total energies, the vanishing of the HOMO–LUMO gap associated with the unphysical charge delocalization leads to an unphysical low-energy spectrum and catastrophic failure of most popular solvers for the KS self-consistent field (SCF) problem. We apply a robust quasi-Newton SCF solver to obtain solutions for some of these difficult cases. The anatomy of the charge delocalization is revealed by the natural deformation orbitals obtained from the density matrix difference between the Hartree–Fock and KS solutions; the charge delocalization not only can occur between charged fragments (such as in zwitterionic polypeptides) but also involves neutral fragments. The vanishing-gap phenomenon and troublesome SCF convergence are both attributed to the unphysical KS Fock operator eigenspectra of molecular fragments (e.g., amino acids or their side chains). Analysis of amino acid pairs suggests that the unphysical charge delocalization can be partially ameliorated by the use of some range-separated hybrid functionals but not by semilocal or standard hybrid functionals. Last, we demonstrate that solutions without the unphysical charge delocalization can be located even for semilocal KS functionals highly prone to such defects, but such solutions have non-Aufbau character and are unstable with respect to mixing of the non-overlapping “frontier” orbitals. Caution should be exercised when unexpectedly small (or vanishing) HOMO–LUMO gaps and atypical SCF convergence patterns (e.g., oscillatory) are observed in KS DFT simulations in any context (bio or otherwise).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Structural Evolution of the Hydrated Electron in Water Cluster Anions (H 2 O) n – , n ≤ 200, by Electronic Absorption Spectroscopy

Electronic absorption spectra of water cluster anions (H 2 O) n - , n ≤ 200, at T = 80 K are obtained by photodissociation spectroscopy and compared with simulations from literature and experimental data for bulk hydrated electrons. Two almost isoenergetic electron binding motifs are seen for cluster sizes 20 ≤ n ≤ 40, which are assigned to surface and partially embedded isomers. With increasing cluster size, the surface isomer becomes less populated, and for n ≥ 50, the partially embedded isomer prevails. The absorption shifts to the blue, reaching a plateau at n ≈ 100. In this size range, the absorption spectrum is similar to that of the bulk hydrated electron but is slightly red-shifted; spectral moment analysis indicates that these clusters are reasonable model systems for hydrated electrons near the liquid-vacuum interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity from energy fluctuations in dilute quantum critical polar metals

Abstract Superconductivity in low carrier density metals challenges the conventional electron-phonon theory due to the absence of retardation required to overcome Coulomb repulsion. Here we demonstrate that pairing mediated by energy fluctuations, ubiquitously present close to continuous phase transitions, occurs in dilute quantum critical polar metals and results in a dome-like dependence of the superconducting T c on carrier density, characteristic of non-BCS superconductors. In quantum critical polar metals, the Coulomb repulsion is heavily screened, while the critical transverse optical phonons decouple from the electron charge. In the resulting vacuum, long-range attractive interactions emerge from the energy fluctuations of the critical phonons, resembling the gravitational interactions of a chargeless dark matter universe. Our estimates show that this mechanism may explain the critical temperatures observed in doped SrTiO 3 . We provide predictions for the enhancement of superconductivity near polar quantum criticality in two- and three-dimensional materials that can be used to test our theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preservation of high-pressure volatiles in nanostructured diamond capsules

High pressure induces dramatic changes and novel phenomena in condensed volatiles(1,2) that are usually not preserved after recovery from pressure vessels. In this study we report a process that pressurizes volatiles into nanopores of type 1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0 gigapascals embedded in nanocrystalline diamond, energy-dispersive X-ray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type 2 glassy carbon can be used as the precursor container material. Additional experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.

36 MATERIALS SCIENCE↗

Subpicosecond HI elimination in the 266 nm photodissociation of branched iodoalkanes

Here, the 266 nm photodissociation dynamics of 1-iodopropane and 2-iodopropane were studied using photofragment translational energy spectroscopy using vacuum ultraviolet (VUV) photoionization and electron impact ionization detection of products. The photochemistry of 1-iodopropane was found to be similar to that of iodomethane and iodoethane, with dominant production of I*( 2 P 1/2 ), and no evidence (<0.21%) for HI + alkene formation. Significantly different behavior was observed for 2-iodopropane, with dominant production of ground state I( 2 P 3/2 ), and a HI yield >10.5%. The anisotropy (β) parameters for all channels approached the limiting value of 2.0, indicating that 1,2-HI elimination occurs on subpicosecond timescales, like direct C–I bond fission, following excitation to 3 Q 0 . The HI translational energy and angular distributions were similar to those for I( 2 P 3/2 ), suggesting that motion of the heavy I atom in HI is largely derived from the repulsive nature of the 1 Q 1 surface correlating to R + I with the light H atom picked up by ground state I late in the exit channel producing highly vibrationally excited HI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental studies of high-temperature thermal dissociation of iso-propanol

iso-Propanol is an important biofuel for transportation and industrial applications, as well as a canonical compound for understanding alcohol reaction chemistry. There are few studies of the thermal decomposition of iso-propanol, hence the objective of this work was to investigate the mechanism of iso-propanol pyrolysis at high-temperature conditions. Shock tube studies were used to investigate the thermal decomposition of iso-propanol and identify the dominant reaction pathways and the intermediate species present in the temperature range of 1395–2053 K and at pressures of 0.3–4 bar. Time-resolved mass spectra were obtained from pyrolysis experiments in shock tube/mass spectrometer apparatuses using electron impact ionization or synchrotron vacuum ultraviolet photoionization. The relative concentrations of the intermediate species were used to identify the dominant reaction channels. iso-Propanol dissociated by water loss to propene and by elimination of a methyl radical yielding a 1-hydroxyethyl radical at the conditions studied. The time-dependent mass spectra allowed secondary products to be identified along with the orders of appearance. Notably, peaks at m/z = 50 and 52 were observed providing insight into secondary reactions. These features have not been previously reported in propanol-pyrolysis literature.

Kim, John H. [Univ. of Michigan, Ann Arbor, MI (Un↗

Ping-pong modes and higher-periodicity multipactor

Multipactor is a vacuum discharge driven by secondary electron emission. Multiple period multipactors have long been known to exist but have been studied less extensively. In a period-n multipactor, electrons undergo multiple impacts in one rf period, with the synchronous phase alternating periodically between multiple values. A novel resonant form is proposed that combines one- and two-surface impacts within a single period, provided the total transit time is an odd number of rf half-periods and the product of secondary yields exceeds unity. For low fD products, the simplest such mode is shown to significantly increase the upper electric field boundary of the multipacting region and lead to overlap of higher-order bands. The results agree nicely with 3-D particle-in-cell code simulations. An alternative, map-based method is introduced for analyzing higher-periodicity multipactor. Practical implications of the findings are discussed, including consequences for multipactor suppression strategies using a dc magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Giant g-factors of natural impurities in synthetic quartz

We report the observation of g-factors of natural paramagnetic impurities in a pure synthetic quartz crystal at milli-Kelvin temperatures. Measurements are made by performing spectroscopy using multiple high-Q whispering gallery modes sustained in the crystal. Extreme sensitivity of the method at low temperatures allows the determination of natural residual impurities introduced during the crystal growth. We observe g-factors that significantly differ from integer multiples of the electron g-factor in vacuum, and with values of up to 7.6, which reveals much stronger coupling between impurities and the crystal lattice than in previous studies. Both substitutional and interstitial ions are proposed as candidates for the observed interactions.

36 MATERIALS SCIENCE↗

Interaction of epitaxial silicene with overlayers formed by exposure to Al atoms and O{sub 2} molecules

As silicene is not chemically inert, the study and exploitation of its electronic properties outside of ultrahigh vacuum environments require the use of insulating capping layers. In order to understand if aluminum oxide might be a suitable encapsulation material, we used high-resolution synchrotron photoelectron spectroscopy to study the interactions of Al atoms and O{sub 2} molecules, as well as the combination of both, with epitaxial silicene on thin ZrB{sub 2}(0001) films grown on Si(111). The deposition of Al atoms onto silicene, up to the coverage of about 0.4 Al per Si atoms, has little effect on the chemical state of the Si atoms. The silicene-terminated surface is also hardly affected by exposure to O{sub 2} gas, up to a dose of 4500 L. In contrast, when Al-covered silicene is exposed to the same dose, a large fraction of the Si atoms becomes oxidized. This is attributed to dissociative chemisorption of O{sub 2} molecules by Al atoms at the surface, producing reactive atomic oxygen species that cause the oxidation. It is concluded that aluminum oxide overlayers prepared in this fashion are not suitable for encapsulation since they do not prevent but actually enhance the degradation of silicene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Space charge effects for multipactor in coaxial lines

Multipactor is a hazardous vacuum discharge produced by secondary electron emission within microwave devices of particle accelerators and telecommunication satellites. This work analyzes the dynamics of the multipactor discharge within a coaxial line for the mono-energetic electron emission model taking into account the space charge effects. The steady-state is predicted by the proposed model and an analytical expression for the maximum number of electrons released by the discharge presented. This could help to link simulations to experiments and define a multipactor onset criterion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The atomic structure of low-index surfaces of the intermetallic compound InPd

The intermetallic compound InPd (CsCl type of crystal structure with a broad compositional range) is considered as a candidate catalyst for the steam reforming of methanol. Single crystals of this phase have been grown to study the structure of its three low-index surfaces under ultra-high vacuum conditions, using low energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). During surface preparation, preferential sputtering leads to a depletion of In within the top few layers for all three surfaces. The near-surface regions remain slightly Pd-rich until annealing to ∼580 K. A transition occurs between 580 and 660 K where In segregates towards the surface and the near-surface regions become slightly In-rich above ∼660 K. This transition is accompanied by a sharpening of LEED patterns and formation of flat step-terrace morphology, as observed by STM. Several superstructures have been identified for the different surfaces associated with this process. Annealing to higher temperatures (≥750 K) leads to faceting via thermal etching as shown for the (110) surface, with a bulk In composition close to the In-rich limit of the existence domain of the cubic phase. The Pd-rich InPd(111) is found to be consistent with a Pd-terminated bulk truncation model as shown by dynamical LEED analysis while, after annealing at higher temperature, the In-rich InPd(111) is consistent with an In-terminated bulk truncation, in agreement with density functional theory (DFT) calculations of the relative surface energies. More complex surface structures are observed for the (100) surface. Additionally, individual grains of a polycrystalline sample are characterized by micro-spot XPS and LEED as well as low-energy electron microscopy. Results from both individual grains and “global” measurements are interpreted based on comparison to our single crystals findings, DFT calculations and previous literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasma gradient effect on direct laser acceleration

The transfer of a high-intensity laser pulse energy to a high-energy electron beam via the direct laser acceleration mechanism is shown to be significantly enhanced through control of the plasma density gradient. Experiments performed using the OMEGA EP facility's high-intensity beams altered the plasma density and gradients by changing the Mach number and the angle of the gas-jet nozzle to the laser axis. When a long density gradient at the rear of the target is used, the total high-energy electron number measured was enhanced by 4.5 times compared to a shorter rear gradient. Complementary two-dimensional simulations, which follow the laser field evolution and the corresponding electron dynamics, strongly support the key trends observed in the experiment. The effect is twofold, the long density gradient provides the longest acceleration distance while it minimizes the formation of the sheath field as the electron beam exits into the vacuum. This study shows the importance of tailoring the plasma density.

Laser plasma interactions↗

Structural Tolerance of Zirconium Diboride under Electron Irradiation through in-situ Convergent Beam Electron Diffraction and Energy-dispersive X-ray Spectroscopy

Zirconium diboride (ZrB 2 ) is a ultra-high temperature ceramic with high melting temperature (>3000 K), super strength and hardness, good thermal conductivity, and excellent resistance to plasma erosion and chemical erosion, being widely applied in hypersonic flight, arc-electrodes, refractory materials, and plasma-facing materials in fusion reactors. Therefore, the structural stability of the material is essential for the applications. Up to now, the material was investigated under neutron irradiation and high-energy ion irradiations. It was reported that the neutron irradiation caused swelling and catastrophic cracking. High-energy ions (30 keV He + ) changed the surface morphology and caused the bright blue and brown colors on ZrB 2 surfaces between 920 K and 1120 K. The electron irradiation tolerance of the material has not been reported yet. Here we used convergent beam electron diffraction (CBED) and energy-dispersive X-ray spectroscopy (EDS) to investigate structural tolerances of ZrB 2 crystals under high-energy electrons at room temperature under vacuum. Finally, the investigation would benefit the understanding of its structural tolerance at microscales.

42 ENGINEERING↗

Simple and accurate estimation of metal, semiconductor, and insulator work functions

Work-function Φ measures the work needed for an electron to escape a solid. For simple metals, it is almost exclusively the result of the surface dipole created by spill-out of electrons from bulk into the vacuum as shown in the seminal work by Lang and Kohn [Phys. Rev. B 3, 1215 (1971)] using a jellium model. Despite a half century of intense efforts, however, such understanding has not been extended past metals. Here we present a universal model for Φ which contains a previously unrecognized bulk contribution Φ I [Phys. Rev. Lett. 121, 196802 (2018)]. By incorporating Φ I into the jellium model, we find that it dictates the dipole due to charge spill out and provides a description which applies to a wide range of materials, ranging from metals, semiconductors, to insulators.

36 MATERIALS SCIENCE↗

Dynamical Schwinger effect: Properties of the e{sup +} e{sup −} plasma created from vacuum in strong laser fields

We study the dynamical Schwinger effect in the vacuum excitation of the electron-positron plasma under action of a “laser pulse” of the simplest configuration: a linearly polarized, time-dependent and spatially homogeneous electric field. Methodical basis of this investigation is the kinetic equation which is an exact consequence of the basic equations of motion of QED in the considered field model. In the present work we investigate some features of the residual electron-positron plasma and the transient process of its formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intercalation of Iron Atoms under Graphene Formed on Silicon Carbide

The intercalation of iron under a graphene monolayer grown on 4H-SiC(0001) is studied. The experiments have been carried out in situ under conditions of ultrahigh vacuum by low-energy electron diffraction, high-energy-resolution photoelectron spectroscopy using synchrotron radiation, and near carbon K-edge X-ray absorption spectroscopy. The deposited iron film thicknesses have been varied within 0.1–2 nm and the sample temperatures from room temperature to 700°C. It is shown that the intercalation process begins at temperatures higher than ~350°C. In this case, it is found that intercalated iron atoms are localized not only between graphene and a buffer layer coating SiC, but also under the buffer layer itself. The optimal conditions of the intercalation are realized in the range 400–500°C, because, at higher temperatures, the system becomes unstable due to the chemical interaction of the intercalated iron with silicon carbide. The inertness of the intercalated films to action of oxygen is demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Plasma Facing Surface Composition During NSTX Li Experiments

Lithium conditioned plasma facing surfaces have lowered recycling and enhanced plasma performance on many fusion devices. However, the nature of the plasma-lithium surface interaction has been obscured by the difficulty of in-tokamak surface analysis. We report laboratory studies of the chemical composition of lithium surfaces exposed to typical residual gases found in tokamaks. Solid lithium and a molybdenum alloy (TZM) coated with lithium has been examined using x-ray photoelectron spectroscopy, temperature programmed desorption, and Auger electron spectroscopy both in ultrahigh vacuum conditions and after exposure to trace gases. Lithium surfaces near room temperature were oxidized after exposure to 1-2 Langmuirs of oxygen or water vapor. The oxidation rate by carbon monoxide was four times less. Lithiated PFC surfaces in tokamaks will be oxidized in about 100 s depending on the tokamak vacuum conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Green Ocean Amazon (GoAmazon) 2014/15. Semi-Volatile Thermal Desorption Aerosol Gas Chromatograph (SVTAG) Field Campaign Report

In areas where biogenic emissions are oxidized in the presence of anthropogenic pollutants such as SO2, NOx, and black carbon, it has become increasingly apparent that secondary organic aerosol (SOA) formation from biogenic volatile organic compounds (VOCs) is substantially enhanced. Research is urgently needed to elucidate fundamental processes of natural and anthropogenically influenced VOC oxidation and the contribution of these processes to SOA formation. GoAmazon 2014/15 afforded study of the chemical transformations in the region downwind of Manaus, Brazil, where local biogenic VOC emissions are high, and their chemical oxidation can be studied both inside and outside of the urban plume to differentiate the role of anthropogenic influence on secondary aerosol formation during oxidation of these natural VOC emissions. To understand the connection between primary biogenic VOC emissions and their secondary products that form aerosols, we made time-resolved molecular level measurements by deploying a Semi-Volatile Thermal Desorption Aerosol Gas Chromatograph (SV-TAG) and a sequential filter sampler during two intensive operational periods (IOPs) of the GoAmazon 2014/15 field campaign. The SV-TAG measured semi-volatile organic compounds in both the gas and particle phases and the sequential filter sampler collected aerosols on quartz fiber filters in four-hour increments used for offline analysis. SV-TAG employed novel online derivatization that provided chemical speciation of highly oxygenated or functionalized compounds that comprise a substantial fraction of secondary organic aerosols, yet are poorly characterized. It also provided partitioning of these compounds between the vapor and particle phases at sufficient time resolution to define the importance of competing atmospheric processes. These measurements were supported by offline analysis of the filters using two-dimensional gas chromatography (GC x GC) with high-resolution time-of-flight mass spectrometry (HR-TOF-MS) using both electron impact (EI) and soft vacuum ultraviolet (VUV) ionization with derivatization. Speciated chemical data from SV-TAG and filter measurements were used to elucidate the relative importance of potential oxidation pathways by providing detailed information on the product distribution from atmospheric reactions and the quantification of known tracers for various oxidation pathways. Together, these techniques provided unequivocal molecular identification of a wide range of atmospheric organic compounds spanning the volatile, semi-volatile, and non-volatile phases. This level of chemical characterization provided insight into the chemical and physical processes that control the atmospheric oxidation of biogenic VOC and subsequent formation of SOA.

54 ENVIRONMENTAL SCIENCES↗