Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unit dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Supramolecular and Hybrid Bonding Polymers

Staudinger established a century ago the existence of covalent macromolecules, work that led to the development of transformative materials of great benefit to society and a “quantum leap” in our understanding of biological systems. Over the past few decades the concept of supramolecular polymers has emerged–chemical systems in which structural units bond strongly to each other non-covalently. Herein, we discuss how these dynamic systems actually exist in the natural world and can create soft materials with structures, properties, and functions beyond the ones we know in Staudinger polymers. We reflect here on the potential of novel systems in which covalent and supramolecular polymers are chemically integrated and describe them as hybrid bonding polymers. This paper describes the concept with recent examples from the Stupp laboratory, and discusses their potential functions as robotic materials that mimic living matter and structures that offer new ideas on how to recycle and reuse soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Decentralized Data-Driven Estimation of Generator Rotor Speed and Inertia Constant Based on Adaptive Unscented Kalman Filter

This paper proposes an online decentralized and data-driven method for synchronous generator rotor speed and inertia estimation. First, an analytical relationship between the generator terminal voltage/current phasors and its internal rotor speed is derived using the Thevenin equivalent. The parameters of the latter are obtained via a recursive estimator, which allows us to estimate the generator's internal rotor speed from voltage/current phasors without the need for any generator information. Second, we reformulate the equivalent swing equation into the Kalman filter form, which enables us to use a priori-estimated internal rotor speed along with measured real and reactive power injections to obtain an estimate of the inertia for each online synchronous generator. This is achieved through an adaptive unscented Kalman filter. We demonstrate that the use of terminal bus frequency to approximate the rotor speed for inertia estimation by existing methods leads to large estimation biases/errors. Numerical simulations carried out on the IEEE 39-bus and Texas 2000-bus systems reveal that our proposed method is consistently more accurate than existing methods. Moreover, our proposed method is insensitive to both the type and location of system disturbances, and it is robust to different levels of measurement noise.

bus frequency↗
DOE OSTI2025

Structure-dependent clustering-to-declustering solute segregation transitions near disconnections

Grain-boundary disconnections, characterized by a step and a dislocation, are pervasive interfacial line defects that play a critical role in governing the properties and performance of nanocrystalline alloys. Although segregation of alloying elements is frequently observed at GB disconnections, the underlying mechanisms remain poorly understood, particularly at elevated temperatures and non-dilute conditions. In this study, we employ atomistic simulations to study the segregation behavior of Ag at various faulted disconnections in Cu as a model material system. Our results demonstrate a pronounced size and compactness effect on the segregation behavior: more compact faulted disconnection structures promote the formation of Ag segregation clusters due to a highly localized tensile field, whereas more spread faulted disconnection structures (i.e., with wider partial dislocation spacing) exhibit much weaker clustering tendencies. Furthermore, with increasing temperature, Ag clustering in small disconnections initially intensifies and then disappears, indicating a thermally driven transition from clustering to declustering segregation behavior.

Disconnections↗
DOE OSTI2025

A Perspective on Multiscale Modeling of Explicit Solvation-Enabled Simulations of Catalysis at Liquid–Solid Interfaces

Catalysis at liquid-solid interfaces is profoundly influenced by the interfacial solvent structure, which affects catalytic activity, selectivity, and reaction pathways. This perspective discusses state-of-the-art multiscale modeling methods that integrate quantum mechanics and molecular mechanics approaches to apply explicit solvent molecules to capture these interfacial phenomena. Specifically, the construction of multiscale models, the importance of capturing the interfacial solvent structure, and the computational strategies used to achieve this are explored, and the challenges in balancing chemical accuracy with computational expense are highlighted. Additionally, this perspective addresses the limitations of current methods. Opportunities for integrating machine learning are proposed. Here, by advancing the efficiency and user friendliness of multiscale modeling, it is argued that deeper insights into heterogeneous catalysis in liquid phases can be provided, which will ultimately contribute to the development of more efficient catalytic processes.

Ab initio molecular dynamics↗
DOE OSTI2025

Investigation of resonant layer response in electron viscosity regime

We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the electron viscosity regime corresponding to slowly rotating and highly viscous plasmas.

Asymptotic analysis↗
DOE OSTI2025

Dynamics of amphiphilic PEG–PDMS–PEG triblock copolymer assemblies

Here, the size and stability of micelles and vesicles determine the uptake capacity of guest molecules, thereby influencing potential applications in drug/gene delivery, bioreactors, and templates for nanoparticle synthesis. Polyethylene glycol (PEG) and polydimethylsiloxane (PDMS) are commonly used in these applications. We discovered that PEG-PDMS-PEG triblock copolymers can assemble into micelles and vesicles, making them valuable for dynamic studies to derive the bending elasticity, $κ_η$, which governs the stability these objects. We analyzed the structure using cryogenic transmission electron microscopy and small-angle neutron scattering. We investigated the dynamics through dynamic light scattering and neutron spin echo spectroscopy. By varying the number of repeating units in the hydrophilic block, we created micellar (PEG 28 -PDMS 15 -PEG 28 ) and vesicular systems (PEG 14 -PDMS 15 -PEG 14 ). For the vesicle, membrane rigidity was determined from experiments to be $κ_η$ =(16 ± 2) $k_BT$, where $k_BT$ is the thermal energy ($k_B$ Boltzmann’s constant and T is the temperature). According to Zilman and Granek's concept, membrane rigidity reflects height-height fluctuations within the membrane layer. Compared to polymers at the oil-water interface of a microemulsion, the membrane rigidity in polymersomes is over an order of magnitude higher, indicating significantly enhanced stability. This value closely aligns with that of liposomes, suggesting similar stability between polymersomes and liposomes.

Gupta, Sudipta [Louisiana State Univ., Baton Rouge↗
DOE OSTI2026

Schwinger-Keldysh effective action for hydrodynamics with approximate symmetries

We study hydrodynamic theories with approximate symmetries in the recently developed effective action approach on the Schwinger-Keldysh contour. We employ the method of spurious symmetry transformation for small explicit symmetry-breaking parameters to systematically constrain symmetry-breaking effects in the nonequilibrium effective action for hydrodynamics. We apply our method to the hydrodynamic theory of chiral symmetry in quantum chromodynamics at finite temperature and density and its explicit breaking by quark masses. We show that the spurious symmetry and the Kubo-Martin-Schwinger relation dictate that the Ward-Takahashi identity for the axial symmetry, i.e., the partial conservation of axial vector current (PCAC) relation, contains a relaxational term proportional to the axial chemical potential, whose kinetic coefficient is at least of the second order in the quark mass. In the phase where the chiral symmetry is spontaneously broken, and the pseudo-Nambu-Goldstone pions appear as hydrodynamic variables, this relaxation effect is subleading compared to the conventional pion mass term in the PCAC relation, which is of the first order in the quark mass. On the other hand, in the chiral symmetry restored phase, we show that our relaxation term, which is of the second order in the quark mass, becomes the leading contribution to the axial charge relaxation. Therefore, the leading axial charge relaxation mechanism is parametrically different in the quark mass across a chiral phase transition.

Goldstone bosons↗
DOE OSTI2020

Thermal conductivity and its relation to atomic structure for symmetrical tilt grain boundaries in silicon

We perform a systematic study of thermal resistance and conductance of tilt grain boundaries (GBs) in Si using classical molecular dynamics. The GBs studied are naturally divided into three groups according to the structural units forming the GB core. In this work we find that, within each group, the GB thermal conductivity strongly correlates with the excess GB energy. All three groups predict nearly the same GB conductivity extrapolated to the high-energy limit. This limiting value is close to the thermal conductivity of amorphous Si, suggesting similar heat transport mechanisms. While the lattice thermal conductivity decreases with temperature, the GB conductivity slightly increases. However, at high temperatures it turns over and starts decreasing if the GB structure undergoes a premelting transformation. Analysis of vibrational spectra of GBs resolved along different directions sheds light on the mechanisms of their thermal resistance. The existence of alternating tensile and compressive atomic environments in the GB core gives rise to localized vibrational modes, frequency gaps creating acoustic mismatch with lattice phonons, and anharmonic vibrations of loosely bound atoms residing in open atomic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural features of solid-solid phase transitions and lattice dynamics in U 3 O 8

Triuranium octoxide (U 3 O 8 ) undergoes an orthorhombic to hexagonal structural phase transition near Ts=305°C, and a separate nonstructural phase transition at Tc=210°C. The later transition has previously been associated with temperature-induced fluctuations in the uranium oxidation state. A discontinuity in the slope of electrical conductivity versus temperature measurement at 210°C has supported this idea. The orthorhombic phase has three crystallographic sites in two distinct oxidation configurations [2 U(V) and 1 U(VI)], whereas the hexagonal phase has one distinct uranium site. High-resolution x-ray diffraction measurements eliminate the possibility of superlattice Bragg reflections to less than 0.2 e - scattering power and U 3 O 8 is not metallic; consequently, the presence of oxidation fluctuations is required for charge balancing. Interestingly, the order-to-disorder transition occurs at a much lower temperature than the structural transition. Using temperature-dependent x-ray diffraction and Raman spectroscopy, we show anisotropic lattice expansion in the in-plane b and c lattice constants. A specific discontinuity in the temperature derivatives of the b and c lattice constants are the first reported structural signatures of the order-to-disorder transition, suggestive of a change in local U–O coordination. Phonon frequencies of U 3 O 8 measured by Raman spectroscopy show significant temperature-dependent dynamics. Redshifting of several modes between 40 and 300°C cannot be explained by unit cell expansion alone because the unit cell volume decreases in this region. Instead, we show that phonon frequencies are highly correlated with the anisotropic lattice expansion/contraction along specific crystallographic directions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Renormalized classical theory of quantum magnets

Here, we derive a renormalized classical spin (RCS) theory for 𝑆 >1/2 quantum magnets by constraining a generalized classical theory that includes all multipolar fluctuations to a reduced CP 1 phase space of dipolar SU(2) coherent states. When the spin Hamiltonian $\hat{ℋ}$(𝑆) is linear in the spin operators $\hat{𝑺}$ 𝑗 for each lattice site 𝑗, the RCS Hamiltonian $\tilde{ℋ}$ cl coincides with the usual classical model ℋ cl = lim 𝑆→∞⁡ $\hat{ℋ}$(𝑆). In the presence of nonlinear terms, however, the RCS theory is more accurate than ℋ cl . For the many materials modeled by spin Hamiltonians with (nonlinear) single-ion anisotropy terms, the use of the RCS theory is essential to accurately model phase diagrams and to extract the correct Hamiltonian parameters from neutron-scattering data.

magnetic anisotropy↗
DOE OSTI2022

Linking remotely sensed ecosystem resilience with forest mortality across the continental United States

Episodes of forest mortality have been observed worldwide associated with climate change, impacting species composition and ecosystem services such as water resources and carbon sequestration. Yet our ability to predict forest mortality remains limited, especially across large scales. Time series of satellite imagery has been used to document ecosystem resilience globally, but it is not clear how well remotely sensed resilience can inform the prediction of forest mortality across continental, multi-biome scales. Here, we leverage forest inventories across the continental United States to systematically assess the potential of ecosystem resilience derived using different data sets and methods to predict forest mortality. Here we found high resilience was associated with low mortality in eastern forests but was associated with high mortality in western regions. The unexpected resilience–mortality relation in western United States may be due to several factors including plant trait acclimation, insect population dynamics, or resource competition. Overall, our results not only supported the opportunity to use remotely sensed ecosystem resilience to predict forest mortality but also highlighted that ecological factors may have crucial influences because they can reverse the sign of the resilience–mortality relationships.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Holo-Omics disentangle drought response and biotic interactions among plant, endophyte and pathogen

Holo-omics provide a novel opportunity to study the interactions among fungi from different functional guilds in host plants in field conditions. We address the entangled responses of plant pathogenic and endophytic fungi associated with sorghum when droughted through the assembly of the most abundant fungal, endophyte genome from rhizospheric metagenomic sequences followed by a comparison of its metatranscriptome with the host plant metabolome and transcriptome. The rise in relative abundance of endophytic Acremonium persicinum (operational taxonomic unit 5 (OTU5)) in drought co-occurs with a rise in fungal membrane dynamics and plant metabolites, led by ethanolamine, a key phospholipid membrane component. The negative association between endophytic A. persicinum (OTU5) and plant pathogenic fungi co-occurs with a rise in expression of the endophyte's biosynthetic gene clusters coding for secondary compounds. Endophytic A. persicinum (OTU5) and plant pathogenic fungi are negatively associated under preflowering drought but not under postflowering drought, likely a consequence of variation in fungal fitness responses to changes in the availability of water and niche space caused by plant maturation over the growing season. Our findings suggest that the dynamic biotic interactions among host, beneficial and harmful microbiota in a changing environment can be disentangled by a blending of field observation, laboratory validation, holo-omics and ecological modelling.

Chen, Peilin↗
DOE OSTI2025

A Novel Approach for Computing Rigid Body Motion Using Linear Accelerations

Here, a novel approach is presented for computing general rigid body motion based on a few known linear accelerations. This method utilizes linear acceleration data obtained from three distinct points on the body, all within a body-fixed reference frame. The only requirement is that the three chosen points must not be collinear. A system of differential-algebraic equations is derived, combining principles of rigid body kinematics with theory of the rotation group SO(3). These equations provide a framework for numerically computing various motion parameters, including angular velocity, angular acceleration, body orientation, velocity field, acceleration field, and displacement field. By numerically solving this system of equations, we can fully characterize rigid body motion in three-dimensional space. A numerical example is provided to demonstrate the practical implementation and efficacy of the proposed technique, illustrating its potential for accurate motion computation in various applications.

42 ENGINEERING↗
DOE OSTI2026

Beam halo formation with different cathode distributions

Beam halo refers to the low-density distribution of particles extending beyond the beam core, and its generation and mitigation are important topics in particle accelerator design. Effective mitigation of beam halo is essential for the cooler design based on Energy Recovery Linac (ERL), which must deliver an electron beam with average beam current of 100 mA and a charge 1 nC per bunch. In the ERL injector and booster linacs, space charge effects are stronger due to relatively low beam energy (6 MeV). Additionally, the longer bunch length of approximately 100 ps in this regime vs the RF period of 5.08 ns makes the formation of beam halos more likely. Therefore, effective collimation of beam halo is critical to maintaining the required beam parameters. To design an effective collimation scheme, several halo distributions were generated at the cathode and used to study halo formation within the injector-merger. This paper presents different halo distributions and halo formation, providing insights on halo collimation strategy.

Accelerator Physics↗
DOE OSTI2026

Current status of the electron transport line from RCS to ESR: RTE line

The electron injection system of the U.S. Electron-Ion Collider (EIC) is located outside of the RHIC tunnel. Electrons beams accelerated by the Rapid Cycling Synchrotron (RCS) must be transported to the Electron Storage Ring (ESR), which resides within the RHIC tunnel. To accomplish this, a dedicated beam transport line, referred to as RTE (RCS-to-ESR) line is being designed. The proposed conceptual design comprises three main sections; RCS extraction, a vertical bend and dispersion suppression region, and ESR injection matching. The extraction section uses pulsed kickers and septum magnets to achieve a total deflection angle of 3 degrees. To align the injection section with ESR, the beamline must provide a vertical elevation of 1.68 m, and an array of FODO cells is used to suppress the vertical dispersion. The total length of the RTE line is approximately 133 m, and this paper presents the current design status and considerations for this transport line.

Accelerator Physics↗
DOE OSTI2026

Design update on the transition beamline for the CEBAF Energy Upgrade

For Jefferson Lab’s 22GeV upgrade, two new permanent-magnet Fixed-Field Alternating Gradient (FFA) arcs will be integrated to serve the accelerator’s six highest-energy recirculation passes. Connecting these FFA arcs to the existing linear accelerator (linac) requires a carefully engineered transition section. The current design has two parts where the first part adiabatically matches the beam dispersion and orbit trajectories, while the second part aligns the Twiss parameters (alpha and beta functions) with those at the linac entrance. Given the tight spatial constraints and multiple matching requirements, a genetic algorithm is being explored to optimize the beam optics matching. This paper presents the current progress in developing and optimizing this transition.

Accelerator Physics↗
DOE OSTI2026

Linac to BAR/RCS transfer line design for EIC electron injection system

A transfer line has been designed for the Electron-Ion Collider (EIC) to transport electron bunches from the linac to the Rapid Cycling Synchrotron (RCS). In its initial operational stage, the line accommodates 1 nC electron bunches directly from the linac. To support a future upgrade involving a Beam Accumulator Ring (BAR), which will stack individual bunches to form high-charge 28 nC bunches, the design incorporates two switching dipoles enabling injection into and extraction from the BAR. Additionally, a beam dump has been included for operational flexibility and safety. The final segment of the line interfaces with the RCS through a modified Penner bend, preserving beam quality while satisfying geometric constraints. This layout ensures compatibility with both current and future operational modes of the EIC injection system.

Accelerator Physics↗