Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Volcanoes on the inner planets - Some preliminary comparisons of gross topography

The paper extends previous numerical work on analogs of planetary landform (Pike, 1974, 1978) by concentrating on volcanic edifices rather than impact craters. Two kinds of extraterrestrial volcanic constructs - domes on the lunar maria and calderas on Mars - are compared with terrestrial volcanoes. According to available data, neither type of landform unequivocally resembles a specific class of terrestrial volcano. The quantitative models of volcanoes presented necessarily are statistical because the shapes of volcanic landforms vary over a wide range of values.

Pike, R. J.↗
NASA NTRS1979

Global tectonic studies: Hotspots and anomalous topography

Volcanic activity on Earth and its secular variations are compared with that on other terrestrial planets. Activity at divergent, transform, and convergent plate margins is described with particular emphasis on hot spots and flood basalts. The timing and causing of uplifting above 500 meters, which in not associated with either plate boundaries or the normal nonplate margin edges of continents is considered with particular focus on the Guyana Highlands in southern Venezuela and western British Guiana, and the Brazilian Highlands in the central, eastern, and southern parts of the country. The mode and mechanism of plateau uplifting and the re-elevation of old mountain belts and subsidence of intra-continental basins are also discussed.

Burke, K.↗
NASA NTRS1979

Topography and tectonics of mid-oceanic ridge axes

Numerical fluid dynamic models of mid-oceanic ridge axes were constructed using distributions of material properties constrained by seismic studies and thermal calculations. The calculations indicate that spreading is passive except for forces caused by density differences due to thermal expansion and partial melt. Except for geometric differences due to temperature distribution, one set of mechanical properties can adequately explain central rifts of slow ridges and central peaks of fast ridges. Viscous head loss in the upwelling material dominates at low spreading rates where material ascends through a narrow conduit. Thermal expansion and partial melting dominate at high spreading rates where a wide low viscosity crustal magma chamber is present. The preferred rheology is 10 to the 20th poise for the upwelling lithosphere; less than 5 x 10 to the 17th for the crustal magma chamber and axial intrusion zone at fast ridges, and a yield stress of 200 bars for the lithosphere. The calculation correctly predicts the existence of central peaks at 'hot-spot' ridges, where seismic evidence indicates a large magma chamber.

Sleep, N. H.↗
NASA NTRS1979

Smythii basin topography and comparisons with Orientale

The Smythii basin has the most extensive topographic coverage of any lunar multi-ringed basin. Topographic data are used to study the morphology and morphometry of Smythii and to make comparisons with similar basins. The depth of the basin is shown to be over 8 km, which is comparable to that of Orientale. The inner ring reaches heights of 3.4 km, while the intermediate ring exhibits little relief. Lowest points in the basin are related to mare ridges. Basin volume is estimated to be 21 million cubic kilometers. Evidence suggests that significant differences in substrate characteristics may have existed for the Smythii and Orientale impacts.

Strain, P. L.↗
NASA NTRS1978

Bent crystal X-ray topography

A television X-ray topographic camera system was constructed. The system differs from the previous system in that it incorporates the X-ray TV imaging system and has a semi-automatic wafer loading system. Also the X-ray diffraction is in a vertical plane. This feature makes wafer loading easier and makes the system compatible with any commercial X-ray generating system. Topographs and results obtained from a study of the diffraction contrast variation with impurity concentration for both boron implanted and boron diffused silicon are included.

Parker, D. L.↗
NASA NTRS1981

Some effects of topography, soil moisture, and sea-surface temperature on continental precipitation as computed with the GISS coarse mesh climate model

The effects of terrain elevation, soil moisture, and zonal variations in sea/surface temperature on the mean daily precipitation rates over Australia, Africa, and South America in January were evaluated. It is suggested that evaporation of soil moisture may either increase or decrease the model generated precipitation, depending on the surface albedo. It was found that a flat, dry continent model best simulates the January rainfall over Australia and South America, while over Africa the simulation is improved by the inclusion of surface physics, specifically soil moisture and albedo variations.

Spar, J.↗
NASA NTRS1981

Seasat altimeter observations of dynamic topography in the Gulf Stream region

A straightforward approach to altimeter data analysis in the Gulf Stream system is presented, using a detailed geoid model to remove the gravitational component. The resulting sea surface height profiles compare remarkably well with independent oceanographic observations. Specific features such as cold rings, warm rings, and no anomaly regions are analyzed and it is shown that known positions of cyclonic and anticyclonic rings correspond with depressions and elevations, respectively, with amplitudes as large as 95 cm. The apparent fluctuation of the Gulf Stream is indicated by the results, as in the finding that on time scales of a few days, surface transport indicated by the sea surface height difference across the stream varied by nearly 30%

Cheney, R. E.↗
NASA NTRS1981

Topography of Martian central volcanoes

Results are presented of the topographic mapping of six large central volcanoes on Mars. Stereo images of the volcanoes Olympus Mons, Elysium Mons, Albor Tholus, Ceraunius Tholus, Uranius Tholus and Uranius Patera were acquired by Viking Orbiter 1, and pairs of images were compiled into topographic maps through the use of digital image measurement techniques. Olympus Mons is found to have the general form of a terrestrial basaltic shield constructed almost entirely from lava flows, however with an altitude of 20-23 km and flank slopes averaging about 4 deg; a high nominal density indicates that anomalously dense lithosphere underlies the shield. Uranius Patera is observed to be a similar feature of present relief about 2 km, with its lower flanks buried by later lava flood deposits. Elysium Mons has about 13 km of local relief with average slopes of 4.4 deg, although its upper flank slopes are significantly steeper than those of Olympus Mons, suggesting a shield volcano modified by a terminal phase of mixed volcanic activity. Albor Tholus is found to be a partially buried 3-km shield-like construct, while Ceranius and Uranius Tholus are steeper cone-like features with reliefs of about 6 and 2 km, respectively, which may be lava shield constructs modified by a terminal stage of explosive activity.

Blasius, K. B.↗
NASA NTRS1981

The topography of Ganymede's grooved terrain

Using the technique of photoclinometry, topographic profiles across areas of grooved terrain and several other features on Ganymede have been constructed. The grooved terrain examined consists of subparallel grooves spaced 3-10 km apart. Topographic amplitudes are typically 300-400 m, with a maximum of about 700 m. Slopes are very gentle and tend to be primarily concave upward. Very few major positive relief features exist on Ganymede. The most important of these is a broad, gently sloping dome-shaped feature 260 km in diameter and over 2 km high.

Squyres, S. W.↗
NASA NTRS1982

Image processing applied to gravity and topography data covering the continental United States

The applicability of fairly standard image processing techniques to processing and analyzing large geologic data sets in addressed. Image filtering techniques were used to interpolate between gravity station locations to produce a regularly spaced data array that preserves detail in areas with good coverage, and that produces a continuous tone image rather than a contour map. Standard image processing techniques were used to digitally register and overlay topographic and gravity data, and the data were displayed in ways that emphasize subtle but pervasive structural features. The potential of the methods is illustrated through a discussion of linear structures that appear in the processed data between the midcontinent gravity high and the Appalachians.

Arvidson, R. E.↗
NASA NTRS1981

Structure of the midcontinent basement. Topography, gravity, seismic, and remote sensing

Some 600,000 discrete Bouguer gravity estimates of the continental United States were spatially filtered to produce a continuous tone image. The filtered data were also digitally painted in color coded form onto a shaded relief map. The resultant image is a colored shaded relief map where the hue and saturation of a given image element is controlled by the value of the Bouguer anomaly. Major structural features (e.g., midcontinent gravity high) are readily discernible in these data, as are a number of subtle and previously unrecognized features. A linear gravity low that is approximately 120 to 150 km wide extends from southeastern Nebraska, at a break in the midcontinent gravity high, through the Ozark Plateau, and across the Mississippi embayment. The low is also aligned with the Lewis and Clark lineament (Montana to Washington), forming a linear feature of approximately 2800 km in length. In southeastern Missouri the gravity low has an amplitude of 30 milligals, a value that is too high to be explained by simple valley fill by sedimentary rocks.

Guinness, E. A.↗
NASA NTRS1981

Lunar floor-fractured craters - Evidence for viscous relaxation of crater topography

Viscous relaxation is evaluated quantitatively as a possible mechanism to account for the observed topographical modification of floor-fractured lunar craters. On the basis of a model of the moon as a viscous material of uniform Newtonian viscosity, the ultimate topographic profiles of fresh craters predicted taking into account viscous relaxation effects are compared with the observed profiles of floor-fractured craters of similar diameter. It is found that for a number of crater pairs, the agreement of the observations with the predictions of the simple viscous relaxation model is good, suggesting that isostatic adjustment of craters in areas of anomalously high temperatures at shallow depth may be a more important source of deformation than previously realized.

Hall, J. L.↗
NASA NTRS1982

Topography and stratigraphy of Martian polar layered deposits

The first samples of high resolution Viking Orbiter topographic and stratigraphic data for the layered polar deposits of Mars are presented, showing that these deposits are with respect to both slopes and angular relief similar to those in the south. It is also demonstrated that, in conjunction with stereophotogrammetry, photoclinometry holds promise as a tool for detailed layered deposit studies. The spring season photography, which lends itself to photoclinometric analysis, covers the entire area of the north polar deposits. Detailed tests of layered terrain evolution hypotheses will be made, upon refinement of the data by comparison with stereo data. A more promising refining technique will make use of averaging perpendicular to selected sections to enhance SNR. Local reliefs of 200-800 m, and slopes of 1-8 deg, lead to initial calculations of average layer thickness which yields results of 14-46 m, linearly correlated with slope.

Blasius, K. R.↗
NASA NTRS1982

The study of X-ray scattering to determine surface topography of smooth surfaces

The scattering of X-rays from state-of-the-art polished mirrors is discussed with reference to the requirements of the Advanced X-ray Astrophysics Facility telescope. An experimental set-up is described which allows information to be obtained with subarcsecond resolution. A sample of the data obtained is presented along with a possible theoretical model for its interpretation.

Williams, A. C.↗
NASA NTRS1981

Satellite laser altimeter for measurement of ice sheet topography

Results of a preliminary conceptual design study are presented for a laser altimeter that is capable of high-resolution mapping of the polar ice sheets and is proposed for inclusion in the National Oceanic Satellite System spacecraft or other polar-orbiting satellites. The instrument consists of a pulsed-laser transmitter operating at a wavelength of 532 nm and a duration of 5 nsec, a receiver telescope, a photomultiplier-tube detector, data processing and control electronics, and an attitude sensing and measurement system; a laser footprint diameter of 70 m is planned. The altimeter components are described, and the accuracy of both the altimetry measurement and the attitude measurement is evaluated. A range precision of about 10 cm is estimated, along with an attitude measurement accuracy of approximately 10 arcsec.

Bufton, J. L.↗
NASA NTRS1983

Interaction of the antarctic circumpolar current with bottom topography - An investigation using satellite altimetry

Theoretical studies on the interaction of a zonal current with a zonal ridge, an isolated bump, and a meridional ridge compare favorably with hydrographic observations within the eastward flowing Antarctic Circumpolar Current where it flows over similar topographic features. However, the existing hydrographic data are insufficient for examining the temporal stability and kinematic behavior of the resulting mesoscale structures. In this study, some of these transient features have been compared with patterns in sea surface variability, derived from collinear satellite altimetric data. When these features occurred near the crossing point of two satellite ground traces, it was possible to characterize their length scales, dynamic height relief, and translational and surface geostrophic velocities.

Colton, M. T.↗