SEARCH · Engineering Papers

Results for “time integrator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Analysis of a second-order-accurate finite-volume method for temporally-growing compressible shear layers

A finite-volume method for solving the compressible laminar Navier-Stokes equation in two dimensions is assessed for use in the simulation of transitional flows. The method is second-order-accurate, uses alternating-direction-implicit time integration, and a total-variation-diminishing smoothing operator in the inviscid flux terms. The test problem was a free shear layer with a forced periodicity in x at a specified wavelength and with the parallel mean flow specified as a hyperbolic-tangent profile. A grid refinement investigation verified this method to be second-order-accurate with less than 4 percent error in the growth rate of isolated modes on a 32 by 64 grid. The interaction between modes of similar amplitude was small, less than 1 percent. However, in cases where there was a dominant mode, numerical phase error pumped energy into all other modes. This error results in nonphysical growth rate for modes whose energy content is several orders of magnitude below the dominant mode. In the case when the dominant mode saturates, the pumping action stops and the growth rate of the next largest growing mode regains physical significance.

Atkins, H. L.↗

NASA NTRS1989

Optimal trajectories for hypervelocity flight

Optimal trajectories for hypervelocity flight of interest in aeroassisted orbital transfer are discussed. Both coplanar and noncoplanar transfer are studied. More precisely, the geosynchronous-earth-orbit-, high-earth orbit- and low-earth-orbit-to-low earth-orbit transfers are considered in connection with a spacecraft that is controlled during the atmospheric pass by the angle of attack (coplanar case) or by the angle of attack and the angle of bank (noncoplanar case). Within the framework of classical optimal control, the following problems are studied: minimize the energy required for orbital transfer; maximize the time of flight during the atmospheric portion of the trajectory; and minimize the time integral of the square of the path inclination. Within the framework of minimax optimal control, the problem studied is to minimize the peak rate. Numerical solutions for the problems are obtained by means of the sequential gradient-restoration algorithm. The engineering implications of the results are discussed.

Miele, A.↗

NASA NTRS1989

A nonoscillatory, characteristically convected, finite volume scheme for multidimensional convection problems

A new, nonoscillatory upwind scheme is developed for the multidimensional convection equation. The scheme consists of an upwind, nonoscillatory interpolation of data to the surfaces of an intermediate finite volume; a characteristic convection of surface data to a midpoint time level; and a conservative time integration based on the midpoint rule. This procedure results in a convection scheme capable of resolving discontinuities neither aligned with, nor convected along, grid lines.

Yokota, Jeffrey W.↗

NASA NTRS1989

A Transient Response Method for Linear Coupled Substructures

A method is presented for determining the transient response of a discrete coordinate model of a linear structural system composed of substructures. The method is applicable to systems consisting of any number of substructures, both determinate and indeterminate interface boundaries, and any topological arrangement of the substructures. The method is simple to implement from a computational point of view because the equations of motion of each of the substructures are solved independently, and the interface boundary compatibility conditions are enforced at each integration time step by a matrix multiplication. The method is demonstrated for a structural system consisting of two beam segments and acted upon by a time dependent force. The numerical results from the demonstration problem validates the accuracy of the method. The application of this method to structural systems with changing interface boundary conditions between substructures is discussed.

Admire, J. R.↗

NASA NTRS1989

Determination of solar flare accelerated ion angular distributions from SMM gamma ray and neutron measurements and determination of the He-3/H ratio in the solar photosphere from SMM gamma ray measurements

Comparisons of Solar Maximum Mission (SMM) observations of gamma-ray line and neutron emission with theoretical calculation of their expected production by flare accelerated ion interactions in the solar atmosphere have led to significant advances in the understanding of solar flare particle acceleration and interaction, as well as the flare process itself. These comparisons have enabled the determination of, not only the total number and energy spectrum of accelerated ions trapped at the sun, but also the ion angular distribution as they interact in the solar atmosphere. The Monte Carlo program was modified to include in the calculations of ion trajectories the effects of both mirroring in converging magnetic fields and of pitch angle scattering. Comparing the results of these calculations with the SMM observations, not only the angular distribution of the interacting ions can be determined, but also the initial angular distribution of the ions at acceleration. The reliable determination of the solar photospheric He-3 abundance is of great importance for understanding nucleosynthesis in the early universe and its implications for cosmology, as well as for the study of the evolution of the sun. It is also essential for the determinations of the spectrum and total number of flare accelerated ions from the SMM/GRS gamma-ray line measurements. Systematic Monte Carlo calculations of the time dependence were made as a function of the He-3 abundance and other variables. A new series of calculations were compared for the time-dependent flux of 2.223 MeV neutron capture line emission and the ratio of the time-integrated flux in the 2.223 MeV line to that in the 4.1 to 6.4 MeV nuclear deexcitation band.

Lingenfelter, Richard E.↗

NASA NTRS1989

Improved Si:As BIBIB (Back-Illuminated Blocked-Impurity-Band) hybrid arrays

Results of a program to increase the short wavelength (less than 10 microns) detective quantum efficiency, eta/beta, of Si:As Impurity Band Conduction arrays are presented. The arrays are epitaxially grown Back-Illuminated Blocked (BIB) Impurity-Band (BIBIB) 10x50 detectors bonded to switched-FET multiplexers. It is shown that the 4.7 microns detective quantum efficiency increases proportionately with the thickness of the infrared active layer. A BIB array with a thick active layer, designed for low dark current, exhibits eta/beta = 7 to 9 percent at 4.7 microns for applied bias voltages between 3 and 5 V. The product of quantum efficiency and photoelectric gain, etaG, increases from 0.3 to 2.5 as the voltage increases from 3 to 5 V. Over this voltage range, the dark current increases from 8 to 120 e(-)s(-1) at a device temperature of 4.2 K and is under 70 e(-)s(-1) for all voltages at 2 K. Because of device gain, the effective dark current (equivalent photon rate) is less than 3 e(-)s(-1) under all operating conditions. The effective read noise (equivalent photon noise) is found to be less than 12 electrons under all operating conditions and for integration times between 0.05 and 100 seconds.

Herter, T.↗

NASA NTRS1990

A nonoscillatory, characteristically convected, finite volume scheme for multidimensional convection problems

Yokota, Jeffrey W.↗

NASA NTRS1989

The role of thermal and lubricant boundary layers in the transient thermal analysis of spur gears

An improved convection heat-transfer model has been developed for the prediction of the transient tooth surface temperature of spur gears. The dissipative quality of the lubricating fluid is shown to be limited to the capacity extent of the thermal boundary layer. This phenomenon can be of significance in the determination of the thermal limit of gears accelerating to the point where gear scoring occurs. Steady-state temperature prediction is improved considerably through the use of a variable integration time step that substantially reduces computer time. Computer-generated plots of temperature contours enable the user to animate the propagation of the thermal wave as the gears come into and out of contact, thus contributing to better understanding of this complex problem. This model has a much better capability at predicting gear-tooth temperatures than previous models.

El-Bayoumy, L. E.↗

NASA NTRS1990

Optimal sampling and sensitivity limits of integrating detector arrays in a space environment

The performance of integrating detectors with either destructive read-out or nondestructive direct read-out in a space environment subject to charge-particle and radiation hits was investigated by determining the optimal integration time for maximizing the performance in the presence of a given hit rate. The performance relative to that expected for background-limited performance was evaluated using a combination of analytic techniques and Monte Carlo simulations. Results are used to estimate the performance degradation, due to cosmic rays, of the long-wavelength spectrometer of the Space Infrared Telescope Facility. It was found that its performance may be a factor of 1-5 worse than the background limited performance.

Herter, T.↗

NASA NTRS1990

Evaluation of non-Fourier heat waves influenced by nonlinear/linear boundary effects employing an explicit architecture and controlled stabilization

The present paper is concerned with the problem of heat waves in solids, where, the heat transport due to conduction occurs as propagating thermal disturbances which are transmitted at finite but high speeds. Starting from the general heat flux model of the Jeffrey's-type, and subsequent formulations leading to the Cattaneo-type heat flux model, an evaluation of the heat transport behavior is described for models influenced by non-Fourier effects and subjected to general nonlinear/linear boundary conditions. An explicit time-integration architecture is employed which effectively provides not only accurate representations of the relaxation effects and general boundary conditions but also seeks to provide an understanding of the representative thermal behavior and heat transport mechanisms for a variety of physical situations.

Tamma, Kumar K.↗

NASA NTRS1990

Applicability and evaluation of an implicit self-starting unconditionally stable methodology for the dynamics of structures

The applicability and evaluation of a new self-starting, unconditionally stable, implicit methodology of computation for the dynamics of structures is described. The methodology offers different perspectives and architecture for structural dynamics compared with the traditional (widely advocated and commonly used) time integration methods. It is based on velocity representations and architecture and uses finite elements as the principal analysis tool for structural dynamic modeling/analysis. In particular, the dynamics of beam-type flexural models are considered, and comparative results validate and support the proposed use of the self-starting methodology of computation for the dynamics of linear/nonlinear structures. The overall effectiveness and elegance strongly support its use in most existing commercial codes.

Tamma, Kumar K.↗

NASA NTRS1990

Aeroelastic analysis of wings using the Euler equations with a deforming mesh

Modifications to the CFL3D three-dimensional unsteady Euler/Navier-Stokes code for the aeroelastic analysis of wings are described. The modifications involve including a deforming mesh capability which can move the mesh to continuously conform to the instantaneous shape of the aeroelastically deforming wing, and including the structural equations of motion for their simultaneous time-integration with the governing flow equations. Calculations were performed using the Euler equations to verify the modifications to the code and as a first-step toward aeroelastic analysis using the Navier-Stokes equations. Results are presented for the NACA 0012 airfoil and a 45 deg sweptback wing to demonstrate applications of CFL3D for generalized force computations and aeroelastic analysis. Comparisons are made with published Euler results for the NACA 0012 airfoil and with experimental flutter data for the 45 deg sweptback wing to assess the accuracy of the present capability. These comparisons show good agreement and, thus, the CFL3D code may be used with confidence for aeroelastic analysis of wings. The paper describes the modifications that were made to the code and presents results and comparisons which assess the capability.

Robinson, Brian A.↗

NASA NTRS1990

Heterodyne spectrophotometry of ozone in the 9.6-micron band using a tunable diode laser

Tunable diode laser heterodyne spectrophotometry (TDLHS) has been used to make extremely high resolution (0.0003/cm) solar spectra in the 9.6-micron ozone band. Observations have shown that a signal-to-noise ratio of 120:1 (about 30 percent of theoretical) for an integration time of 1/8 s can be achieved at a resolution of 0.0013 wave numbers. The spectral data have been inverted to yield a total column amount of ozone, in good agreement with that measured at the nearby NOAA ozone monitoring facility in Boulder, Colorado. Line positions for several ozone lines in the spectral region 996-997/cm are reported. Recent improvements have produced a signal-to-noise ratio of 95:1 (about 40 percent of theoretical) at 0.0003/cm and extended the range of wavelengths which can be observed.

Mcelroy, C. T.↗

NASA NTRS1990

Camera artifacts in IUE low-dispersion spectra

Sky-background images obtained by the International Ultraviolet Explorer (IUE) were analyzed to study artificial spectral features (camera artifacts) in low-dispersion spectra. The artifacts mimic emission features and have been present in long-exposure spectra since the launch of the IUE satellite. The camera artifacts are strong in spectra characterized by long exposure times because they scale in time-integrated flux with the background level, which increases during the exposure due to camera phosphorescence. The artifacts cannot be detected in spectra obtained from short, direct exposures of flat-field lamps or standard stars. Plots of average sky-background spectra for the three operational IUE cameras (SWP, LWP, and LWR) are given to aid scientists in the identification of artifacts in their spectra.

Crenshaw, D. Michael↗

NASA NTRS1989

Laser-fluorescence measurements of nitric oxide in low-pressure H2/O2/NO flames

The concentration profiles of NO in low-pressure (76 Torr) H2/O2/Ar flames to which nitric oxide is added are measured by pulsed laser-induced fluorescence. Temporally resolved fluorescence measurements are used to determine the collisional deexcitation rates needed to convert time-integrated fluorescence signal into oxide concentration. Five flames are studied with H2/O2 equivalence ratios of 0.88, 0.98, 1.22, 1.37, and 1.50. In these flames the collisional deexcitation rate decreases rapidly above the burner surface as the density decreases with increasing temperature. A 20 percent decrease is observed for the lean flames, and a 30 percent decrease for the rich flames. Within the precision of the measurement technique (+ or - 10 percent), no significant removal of nitric oxide is observed in these flames.

Cattolica, R. J.↗

NASA NTRS1990

Explicit-implicit staggered procedure for multibody dynamics analysis

An explicit-implicit staggered time-integration procedure is presented for the solution of multibody dynamical equations involving large rotations and constraints. The algorithms adopts a two-stage modification of the central difference algorithm for integrating the translational coordinates and the angular velocity vector, and the midpoint implicit algorithm to solve the kinematical relation in terms of the Euler parameters for updating the angular orientations. The Lagrange multipliers to enforce the system constraints are obtained by implicitly integrating a parabolically regularized differential equation for the multipliers. The performance of the present procedure has been evaluated to applying the procedure to solve several sample problems. The results indicate that the procedure is robust in dealing with a variety of constraints and spatial kinematic motions, hence it is recommended for applications to general multibody dynamics analyses.

Park, K. C.↗

NASA NTRS1990

Phase-referenced VLBI observations of weak radio sources - Milliarcsecond position of Algol

The Fourier inversion of all the delay/rate referenced visibilities of Algol was used to form a 'dirty' map which has dramatically improved VLBI array sensitivity. The Algol system, in a very low state of activity with a total flux density of only 3 mJy, was observed alternatively with the reference source 0309 + 411, about 1 deg away, throughout the 7 hr VLBI experiment. By combining all the individual VLBI observations, the resulting coherent integration time for Algol is 4.2 hr and the corresponding SNR is 12. Internal consistency checks and an analysis of possible systematic astrometric errors indicate that the accuracy of the relative VLBI position of Algol is + or - 0.0005 arcsec in both coordinates and that unknown systematic effects are presently limiting this astrometric measurement.

Lestrade, J.-F.↗

NASA NTRS1990

An airborne compatible photofragmentation two-photon laser-induced fluorescence instrument for measuring background tropospheric levels of NO, NO(x), and NO2

The operating principle, design, and performance of a two-photon LIF (TP-LIF) sensor for simultaneous measurements of NO, NO(x) (NO + NO2), and NO2 are described. In this instrument, NO is first measured by direct spectroscopic TP-LIF detection; NO2 is converted to NO by photofragmentation using an XeF excimer laser operating at 353 nm; and the resulting NO is then detected quantitatively by TP-LIF. The detection limits of the instrument are found to be 3.5 parts per trillion by volume (pptv) of NO and 10 pptv for NO2, with integration times of 2 and 6 min, respectively. The in-flight performance of the instrument was evaluated during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation 2 program in summer 1986, as reported by Gregory et al. (1990).

Sandholm, S. T.↗