Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Fracture surface analysis in composite and titanium bonding

Carbon fibers were obtained from several manufacturers. Surface treatments were performed on these fibers by anodization. The surfaces of these fibers were analyzed by X-ray photoelectron spectroscopy and wetting force measurement. The breaking strength of these fibers was measured at 2.5 cm length. It was seen that the surface treatments reduces the strength of the fibers. It was also seen that the Hercules fibers had a higher breaking strength than the Union Carbide fibers. Fiber critical length measurements showed no difference in critical lengths between AS-4 and AU-4 fibers embedded in polysulfone. However, the fiber lengths were much shorter for the surface treated fibers. This effect could be related to increased adhesion between fiber and matrix, or it could be due to the lower breaking strength of the surface treated fiber.

Devilbiss, T. A.↗
DOE OSTI2022

Loss of energetic particles due to resistive wall mode instability in ITER

Effects of an unstable n = 1 (n is the toroidal mode number) resistive wall mode (RWM) on the energetic particle (EP) confinement and loss are numerically investigated, for an ITER steady state scenario with 10 MA plasma current and 5.3 T toroidal field. The eigenfunction of the RWM is computed, with the associated three-dimensional magnetic field perturbation superposed with the 2D equilibrium field for tracing the EP drift orbits. Considered are mono-energetic EPs at 0.5 MeV and 1 MeV for deuterium ions, and 3.5 MeV for fusion-born alphas, with a range of distribution in the particle pitch angle. Modeling finds that less than 20% of EPs can be lost to the limiting surface in ITER assuming a source distribution uniform in minor radius, due to an unstable RWM that produces 100 Gauss poloidal field perturbation at the outboard mid-plane just inside the (effective) resistive wall surface. On top of the initial prompt drift orbit loss for counter-current EPs, the RWM induced particle loss occurs on a one second time scale, which is comparable to the RWM growth time in ITER. The 'wetted' area, due to the lost EPs striking the limiting surface, is generally found to be large due to the RWM. This is a favorable prediction for ITER. Here, the loss distribution in the poloidal angle is more uniform for co-current EPs. Counter-current EPs experience outward orbit drift when launched from the low-field side, and tend to more often hit the bottom region of the limiting surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2019

Dynamics and Variability of the Spring Dry Season in the United States Southwest as Observed in AmeriFlux and NLDAS-2 Data

The spring dry season occurring in an arid region of the Southwest United States, which receives both winter storm track and summer monsoon precipitation, is investigated. Bimodal precipitation and vegetation growth provide an opportunity to assess multiple climate mechanisms and their impact on hydroclimate and ecosystems.We detect multiple shifts from wet to drier conditions in the observational record and land surface model output. Focusing on the recent dry period, a shift in the late 1990s resulted in earlier and greater spring soil moisture draw down, and later and reduced spring vegetation green-up, compared to a prior wet period (1979 - 1997). A simple soil moisture balance model shows this shift is driven by changes in winter precipitation.The recent post-1999 dry period, as well as an earlier one from 1948 - 1966, are both related to the cool tropics phase of Pacific decadal variability which influences winter precipitation. In agreement with other studies for the Southwest United States, we find the recent drought cannot be explained in terms of precipitation alone, but also is due to the rising influence of temperature, thus highlighting the sensitivity of this region to warming temperatures. Future changes in the spring dry season will therefore be affected by how tropical decadal variability evolves, and also by emerging trends due to human-driven warming.

Pascolini-Campbell, Madeleine↗
NASA NTRS2001

The Potential of Using Landsat 7 Data for the Classification of Sea Ice Surface Conditions During Summer

During spring and summer, the Surface of the Arctic sea ice cover undergoes rapid changes that greatly affect the surface albedo and significantly impact the further decay of the sea ice. These changes are primarily the development of a wet snow cover and the development of melt ponds. As melt pond diameters generally do not exceed a couple of meters, the spatial resolutions of sensors like AVHRR and MODIS are too coarse for their identification. Landsat 7, on the other hand, has a spatial resolution of 30 m (15 m for the pan-chromatic band). The different wavelengths (bands) from blue to near-infrared offer the potential to distinguish among different surface conditions. Landsat 7 data for the Baffin Bay region for June 2000 have been analyzed. The analysis shows that different surface conditions, such as wet snow and meltponded areas, have different signatures in the individual Landsat bands. Consistent with in-situ albedo measurements, melt ponds show up as blueish whereas dry and wet ice have a white to gray appearance in the Landsat true-color image. These spectral differences enable the distinction of melt ponds. The melt pond fraction for the scene studied in this paper was 37%.

Markus, Thorsten↗
NASA NTRS2016

Effects of Material Choice on Biocide Loss in Orion Water Storage Tanks

When preparing for long-duration spaceflight missions, maintaining a safe supply of potable water is of the utmost importance. One major aspect of that is ensuring that microbial growth is minimized. Historically, this challenge has been addressed through the use of biocides. When using biocides, the choice of materials for the storage containers is important, because surface reactions can reduce biocide concentrations below their effective range. In the water storage system baselined for the Orion vehicle, the primary wetted materials are stainless steel (316 L) and a titanium alloy (Ti6Al4V). Previous testing with these materials has shown that the biocide selected for use in the system (ionic silver) will plate out rapidly upon initial wetting of the system. One potential approach for maintaining an adequate biocide concentration is to spike the water supply with high levels of biocide in an attempt to passivate the surface. To evaluate this hypothesis, samples of the wetted materials were tested individually and together to determine the relative loss of biocide under representative surface area-to-volume ratios after 24 hours. Additionally, we have analyzed the efficacy of disinfecting a system containing these materials by measuring reductions in bacterial counts in the same test conditions. Preliminary results indicate that the use of titanium, either individually or in combination with stainless steel, can result in over 95% loss of biocide, while less than 5% is lost when using stainless steel. In bacterial testing, viable organisms were recovered from samples exposed to the titanium coupons after 24 hours. By comparison, no organisms were recovered from the test vessels containing only stainless steel. These results indicate that titanium, while possessing some favorable attributes, may pose additional challenges when used in water storage tanks with ionic silver biocide.

Wallace, W. T.↗
DOE OSTI2020

Surface functionality and formation mechanisms of carbon and graphene quantum dots

Graphene quantum dots (GQDs) and Carbon dots (C-dots) have been widely studied in recent years due to their structural and optoelectrical properties. These properties have prompted the exploration of the role of these carbon-based materials in many potential applications. This includes solar cells, photodetectors, bioimaging, sensors, batteries and drug delivery. These properties and applications of GQDs and C-dots are highly dependent on their size, shape and surface functionality. In this work, GQDs and C-dots mixtures have been synthesized by an inexpensive wet chemical method by varying the synthesis temperature from 85°, 100° to 115 °C. The surface functionalities of the synthesized carbon-based materials were investigated by several analytical methods. We discovered a higher degree of oxidation at higher temperatures. The mechanism of formation of different sized GQDs and C-dots with different functionalities have been explained with the help of XPS and NEXAFS analysis. The influence of size and surface functionalities on the optical properties of these nanomaterials is analyzed by UV–Vis and PL spectroscopic techniques. Furthermore, this study demonstrates that physicochemical properties of GQDs and C-dots can be controlled by changing the synthesis temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tailored Graphene Micropatterns by Wafer-Scale Direct Transfer for Flexible Chemical Sensor Platform

2D materials, such as graphene, exhibit great potential as functional materials for numerous novel applications due to their excellent properties. The grafting of conventional micropatterning techniques on new types of electronic devices is required to fully utilize the unique nature of graphene. However, the conventional lithography and polymer-supported transfer methods often induce the contamination and damage of the graphene surface due to polymer residues and harsh wet-transfer conditions. In this work, a novel strategy to obtain micropatterned graphene on polymer substrates using a direct curing process is demonstrated. Employing this method, entirely flexible, transparent, well-defined self-activated graphene sensor arrays, capable of gas discrimination without external heating, are fabricated on 4 in. wafer-scale substrates. Finite element method simulations show the potential of this patterning technique to maximize the performance of the sensor devices when the active channels of the 2D material are suspended and nanoscaled. This study contributes considerably to the development of flexible functional electronic devices based on 2D materials.

2D materials, Graphene, Microscale patterning, Che↗
DOE OSTI2022

Vapor Deposition Process for Engineering of Dispersed PEMFC ORR Pt/NbO x /C Catalysts

With support from the Department of Energy, and in partnership with Oak Ridge National Laboratory, Exothermics, Northeastern University, the University of Michigan, and IRD Fuel Cells, Ford has led an effort to use physical vapor deposition (PVD) to produce oxygen reduction reaction (ORR) catalysts for proton exchange membrane fuel cells (PEMFCs). Conventional ORR catalysts are made by wet chemical processes, and experience loss of electrochemical surface area and activity over voltage cycling due to Pt dissolution and Pt particle coalescence. Not only was PVD processing researched as a means to reduce solvent waste and enhance reproducibility in catalyst manufacturing, but it was also perceived as a means to deposit preferential phases of niobium oxide onto the catalyst, which would then serve to prevent Pt particle movement and extend PEMFC lifetime.

08 HYDROGEN↗
DOE OSTI2023

Graphite-Salt Interactions: Summary of FY23 Activities

This report summarizes the research activities related to graphite–molten salt interactions during FY 2023. It includes results of FLiNaK infiltration experiments under various operating conditions, such as different temperatures, pressures, and times, to understand the effect of each condition on a variety of nuclear-grade graphites. Six graphite grades with various origins and properties were selected for the intrusion experiments using molten FLiNaK. The effect of intrusion pressure, temperature, and time were evaluated by measuring weight uptake, and the extent of penetration was studied using neutron tomography (n-CT). In addition, the wetting behavior of molten FLiNaK on a graphite surface was studied by measuring the contact angle on various grades of graphite. The results obtained by n-CT and contact angle measurements will help advance the understanding of factors that control the salt penetration in graphite and their relationship with intrinsic structural properties of the various graphite grades.

36 MATERIALS SCIENCE↗
NASA NTRS1978

The Viking biological experiments on Mars

The three biological experiments on board the Viking Mars Landers are discussed. The gas exchange experiment provided periodic measurements of the composition and quantity of gases from Martian surface material, either in a humid or a wet nutrient sampling mode. The labeled release experiment demonstrated that adding an aqueous solution of dilute radioactive compounds to Martian material caused a rapid release of labeled gas. The results of the pyrolytic release experiment remain difficult to interpret. Data from the first two experiments suggest that oxidants (including H2O2 and iron oxide) rather than biota may account for all the observed reactions.

Klein, H. P.↗
NASA NTRS1980

Mark 3 VLBI system: Tropospheric calibration subsystems

Tropospheric delay calibrations are implemented in the Mark 3 system with two subsystems. Estimates of the dry component of tropospheric delay are provided by accurate barometric data from a subsystem of surface meteorological sensors (SMS). An estimate of the wet component of tropospheric delay is provided by a water vapor radiometer (WVR). Both subsystems interface directly to the ASCII Transceiver bus of the Mark 3 system and are operated by the control computer. Seven WVR's under construction are designed to operate in proximity to a radio telescope and can be commanded to point along the line-of-sight to a radio source. They should provide a delay estimate that is accurate to the + or - 2 cm level.

Resch, G. M.↗
NASA NTRS1988

Microwave remote sensing of soil moisture

Knowledge of soil moisture is important to many disciplines, such as agriculture, hydrology, and meteorology. Soil moisture distribution of vast regions can be measured efficiently only with remote sensing techniques from airborne or satellite platforms. At low microwave frequencies, water has a much larger dielectric constant than dry soil. This difference manifests itself in surface emissivity (or reflectivity) change between dry and wet soils, and can be measured by a microwave radiometer or radar. The Microwave Sensors and Data Communications Branch is developing microwave remote sensing techniques using both radar and radiometry, but primarily with microwave radiometry. The efforts in these areas range from developing algorithms for data interpretation to conducting feasibility studies for space systems, with a primary goal of developing a microwave radiometer for soil moisture measurement from satellites, such as EOS or the Space Station. These efforts are listed.

Shiue, J. C.↗
NASA NTRS1993

Control of interfaces in Al-C fibre composites

The interface of Al-C fiber composite was modified by coating a silver layer on the surface of carbon fibres prior to making composites, in an attempt to improve the wettability between molten aluminum and carbon fibers during infiltration. An electroless plating technique was adopted and perfected to provide a homogeneous silver coating on the carbon fiber surface. Al-C fiber composites were prepared using a liquid infiltration technique in a vacuum. It was found that silver coating promoted the wetting between aluminum and carbon fibers, particularly with polyacrylonitrile-base carbon fibers. However, due to rapid dissolution of silver in molten aluminum, it was believed that the improved infiltration was not due to the wetting behavior between molten aluminum and silver. The cleaning of the fiber surface and the preservation of the cleaned carbon surface with silver coating was considered to be the prime reason for the improved wettability. Interfacial reactions between aluminum and carbon fibers were observed. Amorphous carbon was found to react more with aluminum than graphitic carbon. This is believed to be because of the inertness of the graphitic basal planes.

Warrier, S. G.↗
NASA NTRS2001

Capillary Flow in Containers of Polygonal Section: Theory and Experiment

An improved understanding of the large-length-scale capillary flows arising in a low-gravity environment is critical to that engineering community concerned with the design and analysis of spacecraft fluids management systems. Because a significant portion of liquid behavior in spacecraft is capillary dominated it is natural to consider designs that best exploit the spontaneous character of such flows. In the present work, a recently verified asymptotic analysis is extended to approximate spontaneous capillary flows in a large class of cylindrical containers of irregular polygonal section experiencing a step reduction in gravitational acceleration. Drop tower tests are conducted using partially-filled irregular triangular containers for comparison with the theoretical predictions. The degree to which the experimental data agree with the theory is a testament to the robustness of the basic analytical assumption of predominantly parallel flow. As a result, the closed form analytical expressions presented serve as simple, accurate tools for predicting bulk flow characteristics essential to practical low-g system design and analysis. Equations for predicting corner wetting rates, total container flow rates, and transient surfaces shapes are provided that are relevant also to terrestrial applications such as capillary flow in porous media.

Weislogel, Mark M.↗
NASA NTRS1996

Process for producing an activated carbon adsorbent with integral heat transfer apparatus

A process for producing an integral adsorbent-heat exchanger apparatus useful in ammonia refrigerant heat pump systems. In one embodiment, the process wets an activated carbon particles-solvent mixture with a binder-solvent mixture, presses the binder wetted activated carbon mixture on a metal tube surface and thereafter pyrolyzes the mixture to form a bonded activated carbon matrix adjoined to the tube surface. The integral apparatus can be easily and inexpensively produced by the process in large quantities.

Jones, Jack A.↗
NASA NTRS2007

Handling Input and Output for COAMPS

Two suites of software have been developed to handle the input and output of the Coupled Ocean Atmosphere Prediction System (COAMPS), which is a regional atmospheric model developed by the Navy for simulating and predicting weather. Typically, the initial and boundary conditions for COAMPS are provided by a flat-file representation of the Navy s global model. Additional algorithms are needed for running the COAMPS software using global models. One of the present suites satisfies this need for running COAMPS using the Global Forecast System (GFS) model of the National Oceanic and Atmospheric Administration. The first step in running COAMPS downloading of GFS data from an Internet file-transfer-protocol (FTP) server computer of the National Centers for Environmental Prediction (NCEP) is performed by one of the programs (SSC-00273) in this suite. The GFS data, which are in gridded binary (GRIB) format, are then changed to a COAMPS-compatible format by another program in the suite (SSC-00278). Once a forecast is complete, still another program in the suite (SSC-00274) sends the output data to a different server computer. The second suite of software (SSC- 00275) addresses the need to ingest up-to-date land-use-and-land-cover (LULC) data into COAMPS for use in specifying typical climatological values of such surface parameters as albedo, aerodynamic roughness, and ground wetness. This suite includes (1) a program to process LULC data derived from observations by the Moderate Resolution Imaging Spectroradiometer (MODIS) instruments aboard NASA s Terra and Aqua satellites, (2) programs to derive new climatological parameters for the 17-land-use-category MODIS data; and (3) a modified version of a FORTRAN subroutine to be used by COAMPS. The MODIS data files are processed to reformat them into a compressed American Standard Code for Information Interchange (ASCII) format used by COAMPS for efficient processing.

Fitzpatrick, Patrick↗
NASA NTRS2012

An Automated Sample Processing System for Planetary Exploration

An Automated Sample Processing System (ASPS) for wet chemistry processing of organic materials on the surface of Mars has been jointly developed by Ball Aerospace and the Jet Propulsion Laboratory. The mechanism has been built and tested to demonstrate TRL level 4. This paper describes the function of the system, mechanism design, lessons learned, and several challenges that were overcome.

traditional mechanical components↗