Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of Preparation Conditions of Fe@SiO2 Catalyst on Its Structure Using High-Pressure Activity Studies in a 3D-Printed SS Microreactor

Fischer–Tropsch synthesis (FTS) in a 3D-printed stainless steel (SS) microchannel microreactor was investigated using Fe@SiO2 catalysts. The catalysts were prepared by two different techniques: one pot (OP) and autoclave (AC). The mesoporous structure of the two catalysts, Fe@SiO2 (OP) and Fe@SiO2 (AC), ensured a large contact area between the reactants and the catalyst. They were characterized by N2 physisorption, H2 temperature-programmed reduction (H2-TPR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron microscopy (XPS), and thermogravimetric analysis–differential scanning calorimetry (TGA-DSC) techniques. The AC catalyst had a clear core–shell structure and showed a much greater surface area than that prepared by the OP method. The activities of the catalysts in terms of FTS were studied in the 200–350 °C temperature range at 20-bar pressure with a H2/CO molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher selectivity and higher CO conversion to olefins than Fe@SiO2 (OP). Stability studies of both catalysts were carried out for 30 h at 320 °C at 20 bar with a feed gas molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher stability and yielded consistent CO conversion compared to the Fe@SiO2 (OP) catalyst.

Biochemistry & Molecular Biology↗
DOE OSTI2024

NO formation by N 2 /O 2 plasma catalysis: The impact of surface reactions, gas-phase reactions, and mass transport

Pathways and timescales relevant to facilitate plasma-assisted N 2 -O 2 reactions are assessed by measuring the consumption of plasma-derived N and the formation of NO in the gas phase and over Ag catalytic surfaces. These measurements are enabled by a setup that enables N 2 activation in an atmospheric pressure RF plasma jet, enables O 2 addition in the plasma afterglow, facilitates reactions over an Ag wire catalyst, and allows species density quantification by molecular beam mass spectrometry. Gas-phase reactions consume N but do not form NO with high selectivity. The presence of the non-porous Ag wire catalyst increases the rate of N conversion to NO, though mass transfer processes, not surface reactions, dictate the rate of N consumption. When O 2 concentrations and the ratio of the surface area of the catalyst to the void volume of the reactor are high (3–5 mol% O 2 , 10900 m –1 ), N conversion to NO reaches 100 % selectivity. When both N 2 and O 2 are fed through the plasma jet, gas-phase NO production increases 10×, although plasma and gas-phase processes do not exclusively produce NO. Above a threshold NO density, N cannot diffuse to the catalyst surface faster than it is consumed in the gas phase by reactions with NO. Furthermore, the use of heterogeneous catalysts to enhance plasma-driven N x O y formation and control N x O y product selectivity is limited to cases where diffusive transport of N from the gas phase to the catalyst surface is faster than consumption of N from gas-phase reactions with NO.

Engineering↗
DOE OSTI2021

Accelerating Hydrogen Absorption and Desorption Rates in Palladium Nanocubes with an Ultrathin Surface Modification

Exploiting the high surface-area-to-volume ratio of nanomaterials to store energy in the form of electrochemical alloys is an exceptionally promising route for achieving high-rate energy storage and delivery. Nanoscale palladium hydride is an excellent model system for understanding how nanoscale-specific properties affect the absorption and desorption of energy carrying equivalents. Hydrogen absorption and desorption in shape-controlled Pd nanostructures does not occur uniformly across the entire nanoparticle surface. Instead, hydrogen absorption and desorption proceed selectively through high-activity sites at the corners and edges. Such a mechanism hinders the hydrogen absorption rates and greatly reduces the benefit of nanoscaling the dimensions of the palladium. To solve this, we modify the surface of palladium with an ultrathin platinum shell. This modification nearly removes the barrier for hydrogen absorption (89 kJ/mol without a Pt shell and 1.8 kJ/mol with a Pt shell) and enables diffusion through the entire Pd/Pt surface.

25 ENERGY STORAGE↗
DOE OSTI2021

Characterizing juvenile salmon predation risk during early marine residence

Predation mortality can influence the distribution and abundance of fish populations. While predation is often assessed using direct observations of prey consumption, potential predation can be predicted from co-occurring predator and prey densities under varying environmental conditions. Juvenile Pacific salmon Oncorhynchus spp. (i.e., smolts) from the Columbia River Basin experience elevated mortality during the transition from estuarine to ocean habitat, but a thorough understanding of the role of predation remains incomplete. We used a Holling type II functional response to estimate smolt predation risk based on observations of piscivorous seabirds (sooty shearwater [ Ardenna griseus ] and common murre [ Uria aalge ]) and local densities of alternative prey fish including northern anchovy ( Engraulis mordax ) in Oregon and Washington coastal waters during May and June 2010–2012. We evaluated predation risk relative to the availability of alternative prey and physical factors including turbidity and Columbia River plume area, and compared risk to returns of adult salmon. Seabirds and smolts consistently co-occurred at sampling stations throughout most of the study area (mean = 0.79 ± 0.41, SD), indicating that juvenile salmon are regularly exposed to avian predators during early marine residence. Predation risk for juvenile coho ( Oncorhynchus kisutch ), yearling Chinook salmon ( O . tshawytscha ), and subyearling Chinook salmon was on average 70% lower when alternative prey were present. Predation risk was greater in turbid waters, and decreased as water clarity increased. Juvenile coho and yearling Chinook salmon predation risk was lower when river plume surface areas were greater than 15,000 km 2 , while the opposite was estimated for subyearling Chinook salmon. These results suggest that plume area, turbidity, and forage fish abundance near the mouth of the Columbia River, all of which are influenced by river discharge, are useful indicators of potential juvenile salmon mortality that could inform salmonid management.

Phillips, Elizabeth M. (ORCID:0000000327752563)↗
DOE OSTI2022

Syntheses of gold supported on metal oxides and their application in organic transformations

Herein, we report a general and straightforward synthesis method for gold supported on mesoporous and microporous metal oxides. Supported materials, in general, show higher crystallinity compare to unsupported systems as verified through powder X-ray diffraction (XRD). Also, through XRD, most of the metal is observed to be in its oxide form, whereas the gold support was found to be in its metallic state, which has been further confirmed from TEM. In terms of surface area, the catalyst was not found to follow any trend. Morphology wise, there are no changes observed after doping except in few cases. Combined results from XRD, X-ray fluorescence spectroscopy, Auger, and X-ray photoelectron spectroscopy suggest that gold is mainly in the bulk and very little (0.04% in case of gold doped calcium oxide) or non (in case of gold doped mixed manganese-cerium oxide) on the surface. The presence of Au (0) 4f peaks in XPS further confirms the metallic state of the gold. Oxides of indium, magnesium and calcium have been studied for the organic transformation reactions. An enhancement in activity and product selectivity was observed in the case of the gold supported catalysts. Indium serves as a great catalyst for C–C coupling and electrophilic aromatic substitution reactions and gives >99% conversion. Interestingly, 88% selectivity for C–C coupling and >99% selectivity for aromatic substitution have been achieved at 100 °C and room temperature respectively. Magnesium and calcium give Knoevenagel condensation products. At room temperature with very low catalyst loading, >99% conversion and selectivity were observed for the Knoevenagel reaction with as high as 35.30 TOF. Finally, a mechanism for the C–C coupling reaction has been proposed based on these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Power Production, Inter- and Intra-Array Wake Losses from the U.S. East Coast Offshore Wind Energy Lease Areas

There is an urgent need to develop accurate predictions of power production, wake losses and array–array interactions from multi-GW offshore wind farms in order to enable developments that maximize power benefits, minimize levelized cost of energy and reduce investment uncertainty. New, climatologically representative simulations with the Weather Research and Forecasting (WRF) model are presented and analyzed to address these research needs with a specific focus on offshore wind energy lease areas along the U.S. east coast. These, uniquely detailed, simulations are designed to quantify important sources of wake-loss projection uncertainty. They sample across different wind turbine deployment scenarios and thus span the range of plausible installed capacity densities (ICDs) and also include two wind farm parameterizations (WFPs; Fitch and explicit wake parameterization (EWP)) and consider the precise WRF model release used. System-wide mean capacity factors for ICDs of 3.5 to 6.0 MWkm−2 range from 39 to 45% based on output from Fitch and 50 to 55% from EWP. Wake losses are 27–37% (Fitch) and 11–19% (EWP). The discrepancy in CF and wake losses from the two WFPs derives from two linked effects. First, EWP generates a weaker ‘deep array effect’ within the largest wind farm cluster (area of 3675 km2), though both parameterizations indicate substantial within-array wake losses. If 15 MW wind turbines are deployed at an ICD of 6 MWkm−2 the most heavily waked wind turbines generate an average of only 32–35% of the power of those that experience the freestream (undisturbed) flow. Nevertheless, there is no evidence for saturation of the resource. The wind power density (electrical power generation per unit of surface area) increases with ICD and lies between 2 and 3 Wm−2. Second, EWP also systematically generates smaller whole wind farm wakes. Sampling across all offshore wind energy lease areas and the range of ICD considered, the whole wind farm wake extent for a velocity deficit of 5% is 1.18 to 1.38 times larger in simulations with Fitch. Over three-quarters of the variability in normalized wake extents is attributable to variations in freestream wind speeds, turbulent kinetic energy and boundary layer depth. These dependencies on meteorological parameters allow for the development of computationally efficient emulators of wake extents from Fitch and EWP.

17 WIND ENERGY↗
DOE OSTI2020

Establishing a Theoretical Landscape for Identifying Basal Plane Active 2D Metal Borides (MBenes) toward Nitrogen Electroreduction

Abstract To achieve efficient ammonia synthesis via electrochemical nitrogen reduction reaction (NRR), a qualified catalyst should have both high specific activity and large active surface area. However, integrating these two merits into one single material remains a big challenge due to the difficulty in balancing multiple reaction intermediates. Here, it is demonstrated that the boron‐analogues of MXenes, namely “MBenes”, could cope with the challenge and achieve the high activity and large reaction region simultaneously toward NRR. Using extensive density functional theory computations and taking 16 MBenes as representatives, it is identified that seven MBenes (CrB, MoB, WB, Mo 2 B, V 3 B 4 , CrMnB 2 , and CrFeB 2 ) not only have intrinsic basal plane activity for NRR with limiting potentials ranging from −0.22 to −0.82 V, but also possess superior capability of suppressing the competitive hydrogen evolution reaction. Particularly, different from the MXenes whose surface oxidation may block the active sites, once oxidized, these MBenes can catalyze NRR via the self‐activating process, reducing O*/OH* into H 2 O* under reaction conditions, and favoring the N 2 electroreduction. As a result, the exceptional activity and selectivity, high active area (≈10 19 m −2 ), and antioxidation nature render these MBenes as pH‐universal catalysts for NH 3 production without introducing any dopants and defects.

Guo, Xiangyu↗
DOE OSTI2022

Implications of Local Cathode Structure in Solid-State Batteries

Solid-state batteries (SSBs) are promising candidates for energy storage systems—specifically for automotive applications—owing to their higher energy density and supreme safety. SSBs currently must improve area-specific cathode loadings as well as the electro-chemo-mechanical stability at high voltages. Composite cathodes in SSBs are comprised of active material, ion and electronic conductors, binders, and electronic conducting materials. In addition to experimental limitations with engineering thick cathode architectures, low utilization and chemomechanical degradation of the cathodes limit the performance of composite cathodes. Composite cathodes must optimize several parameters simultaneously to achieve high performances that include loading, electrochemically active surface area, mechanical resilience, and porosity. This chapter summarizes the current state-of-the-art applications with regard to composite cathodes for SSBs and provides insights into cathode architectures using geometric packing models. Tailoring ion and electron transport pathways within the electrode while mitigating operational stresses is crucial for achieving energy-dense cathode structres for SSBs.

Dixit, Marm↗
DOE OSTI2019

In situ Preparation of HNbMoO{sub 6}/C Nanocomposite for Sensitive Detection of Clenbuterol

In this paper, we synthesized HNbMoO{sub 6}/C composite through the calcination of octylamine-intercalated HNbMoO{sub 6} precursor. The resulting HNbMoO{sub 6}/C composite showed some new phases of MoO{sub 2}, MoO{sub 3}, NbO{sub 2}, Nb{sub 2}O{sub 5}, and carbon, which was fully confirmed via powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) technologies. Besides, the HNbMoO{sub 6}/C hybrid was coated on glass carbon electrode to construct an electrochemical sensor for sensitive determination of clenbuterol. The electrochemical behaviors of clenbuterol on the prepared electrode were tested by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis. The results showed that the intercalated carbon can act as active sites to accelerate electron transfer. In addition, more exposed surface areas of the HNbMoO{sub 6}/C composite will facilitate the electrolyte to permeate. The oxidation peak current of clenbuterol was linearly related to its concentration in the range of 1.04 × 10{sup −5} to 7.51 × 10{sup −4} mol L{sup −1}, and the determination limit was calculated to be 3.03 × 10{sup −6} mol L{sup −1} (S/N = 3). This sensor exhibits excellent stability, reproducibility, specificity, and good recoveries when applied to monitor clenbuterol in real samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High Selectivity Reactive Carbon Dioxide Capture over Zeolite Dual-Functional Materials

Reactive carbon dioxide capture (RCC) is a process where carbon dioxide (CO 2 ) is captured from a mixed gas stream (such as air) and converted to products without first performing a separation step to concentrate the CO 2 . Here, in this work, zeolite dual-functional materials (ZFMs) are introduced and evaluated for simulated RCC. The studied ZFMs feature high surface area, crystalline, microporous zeolite faujasite (FAU) as the support. Sodium oxide (“Na 2 O”) is impregnated as an effective capture agent capable of scavenging low concentration CO 2 (1,000 ppm). Exchanged and impregnated sodium on FAU chemisorbs CO 2 as carbonates and bicarbonates but does not promote the conversion of sorbed CO 2 to products when heated in hydrogen. The addition of Ru promotes the formation of formates, while the addition of Pt generates carbonyl surface species when heated in hydrogen. The active metal then promotes extremely high selectivity for CO 2 hydrogenation to either methane on Ru catalyst (~150 °C) or carbon monoxide on Pt catalyst (~200 °C) when heated in reducing atmospheres.

36 MATERIALS SCIENCE↗
DOE OSTI2020

N -Arylimide Molecular Balances: A Comprehensive Platform for Studying Aromatic Interactions in Solution

Noncovalent interactions of aromatic surfaces play a key role in many biological processes and in determining the properties and utility of synthetic materials, sensors, and catalysts. However, the study of aromatic interactions has been challenging because these interactions are usually very weak and their trends are modulated by many factors such as structural, electronic, steric, and solvent effects. Recently, N-arylimide molecular balances have emerged as highly versatile and effective platforms for studying aromatic interactions in solution. These molecular balances can accurately measure weak noncovalent interactions in solution via their influence on the folded–unfolded conformational equilibrium. The structure (i.e., size, shape, π-conjugation, and substitution) and nature (i.e., element, charge, and polarity) of the π-surfaces and interacting groups can be readily varied, enabling the study of a wide range of aromatic interactions. These include aromatic stacking, heterocyclic aromatic stacking, and alkyl–π, chalcogen–π, silver–π, halogen–π, substituent–π, and solvent–π interactions. The ability to measure a diverse array of aromatic interactions within a single model system provides a unique perspective and insights as the interaction energies, stability trends, and solvent effects for different types of interactions can be directly compared. Some broad conclusions that have emerged from this comprehensive analysis include: (1) The strongest aromatic interactions involve groups with positive charges such as pyridinium and metal ions which interact with the electrostatically negative π-face of the aromatic surface via cation–π or metal–π interactions. Attractive electrostatic interactions can also form between aromatic surfaces and groups with partial positive charges. (2) Electrostatic interactions involving aromatic surfaces can be switched from repulsive to attractive using electron-withdrawing substituents or heterocycles. These electrostatic trends appear to span many types of aromatic interactions involving a polar group interacting with a π-surface such as halogen–π, chalcogen–π, and carbonyl–π. (3) Nonpolar groups form weak but measurable stabilizing interactions with aromatic surfaces in organic solvents due to favorable dispersion and/or solvophobic effects. Furthermore, a good predictor of the interaction strength is provided by the change in solvent-accessible surface area. (4) Solvent effects modulate the aromatic interactions in the forms of solvophobic effects and competitive solvation, which can be modeled using solvent cohesion density and specific solvent–solute interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

SPRUCE: Shrub Leaf and Stem Functional Traits from 10-year Shrub Layer Biomass Harvests (August 2025)

This data set contains Leaf Mass Area (LMA), Specific Leaf Area (SLA), Leaf Area Index (LAI), and Huber value (Hv) measurements from the 10-year Shrub-layer Biomass harvests in the Spruce and Peatland Responses Under Environmental Change (SPRUCE) experiment in August 2025. The total ground-level cross-sectional sapwood area of Chamaedaphne calyculata (CHCA), Rhododendron groenlandicum (RHGR), and Vaccinium angustifolium (VAAN) were calculated for each of the three shrub-layer community survey plots located in each experimental enclosure. Representative current-year leaves were removed, scanned, dried, and weighed to derive SLA. Grab-samples for VAAN were used to calculate SLA when no biomass was harvested in the shrub-layer community plots. These SLA values were used to infer total one-sided leave surface area from the total species lead dry mass for calculation of LAI and Hv.

Birkebak, Joshua [ORNL] (ORCID:0009000955611494)↗
DOE OSTI2021

Technoeconomic Benefits of Film-Forming Amine Products Applied to Steam Surface Condensers

In a conventional Rankine cycle, the majority of power plants employ surface condensers that use pumped cooling water to reject heat from the cycle. In such cases, heat rejection occurs in a shell and tube heat exchanger by film-wise condensation of low-pressure steam on stainless steel, titanium, brass, or copper-nickel tubing. To improve the thermal performance of steam surface condensers, a replenishable film-forming substance (FFS) can be ap-plied to the condenser tubing to promote efficient dropwise condensation. Conventionally, film-forming amine prod-uct (FFAP) coatings protect boiler surfaces from oxidative corrosion, which substantially reduces the operation and maintenance costs. To quantify the technical and economic benefits of FFAP coatings applied to condenser tubing due to the promotion of dropwise condensation, a thermal resistance network model was established. Using a rep-resentative steam surface condenser, the improvements in thermal performance (overall heat transfer coefficient) and process parameters (net plant efficiency, cooling water flowrate, and turbine backpressure) were determined due to the enhancement in the condensation heat transfer coefficient. Experimentally measured condensation heat transfer coefficients for common condenser materials were compared with the modeling results and were found to be within attainable bounds. Lastly, the trend in total heat exchanger cost reduction is generalized to understand the trade-off between reduced surface area for heat rejection and increase in coating application costs for a re-plenishable coating system.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Non-Solvent Induced Phase Separation Enables Designer Redox Flow Battery Electrodes

Porous carbonaceous electrodes are performance-defining components in redox flow batteries (RFBs), where their properties impact the efficiency, cost, and durability of the system. The overarching challenge is to simultaneously fulfill multiple seemingly contradictory requirements—i.e., high surface area, low pressure drop, and facile mass transport—without sacrificing scalability or manufacturability. Here, non-solvent induced phase separation (NIPS) is proposed as a versatile method to synthesize tunable porous structures suitable for use as RFB electrodes. The variation of the relative concentration of scaffold-forming polyacrylonitrile to pore-forming poly(vinylpyrrolidone) is demonstrated to result in electrodes with distinct microstructure and porosity. Tomographic microscopy, porosimetry, and spectroscopy are used to characterize the 3D structure and surface chemistry. Flow cell studies with two common redox species (i.e., all-vanadium and Fe2+/3+) reveal that the novel electrodes can outperform traditional carbon fiber electrodes. It is posited that the bimodal porous structure, with interconnected large (>50 µm) macrovoids in the through-plane direction and smaller (<5 µm) pores throughout, provides a favorable balance between offsetting traits. Although nascent, the NIPS synthesis approach has the potential to serve as a technology platform for the development of porous electrodes specifically designed to enable electrochemical flow technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A comparative study of Bi, Sb, and BiSb for electrochemical nitrogen reduction leading to a new catalyst design strategy

Recent studies identified Bi as one of the most promising non-noble metal elements that can promote the electrochemical N 2 reduction reaction (ENRR) to produce NH 3 . The electronic features that make Bi a promising ENRR catalyst may also be owned by Sb that belongs to the same group as Bi. Thus, the ENRR properties of Bi, Sb, and a BiSb alloy were investigated comparatively to identify common characteristics that facilitate the ENRR. These catalysts were prepared as uniform coating layers on high surface area carbon felt electrodes, which could serve as both regular electrodes and pseudo-gas diffusion electrodes. The experimental results demonstrated that while Bi and Sb show comparable ENRR performances, the formation of a BiSb alloy distinctively increases the faradic efficiency for NH 3 production. Additionally, the X-ray photoelectron spectroscopy results revealed that Bi in BiSb possesses a partial positive charge while Sb in BiSb possesses a partial negative charge, which can impact the way the catalyst surface interacts with the reactants and reaction intermediates of the ENRR and hydrogen evolution reaction (HER), the major competing reaction with the ENRR. Computational investigations including the Bader charge analysis and Gibbs free energy calculations for the elemental steps of the ENRR and HER provided an explanation of how the formation of a BiSb alloy can change the selectivity for the ENRR. The combined experimental and theoretical results and discussion contained in this study lead to a new strategy for designing efficient metal catalysts for the ENRR. Additionally, this study investigated how the use of gas phase and dissolved N 2 affected the ENRR performances of the Bi, Sb, and BiSb catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Biomass-Derived Carbon and Their Composites for Supercapacitor Applications: Sources, Functions, and Mechanisms

Biomass-derived carbons are eco-friendly and sustainable materials, making them ideal for supercapacitors due to their high surface area, excellent conductivity, cost-effectiveness, and environmental benefits. This review provides valuable insights into biomass-derived carbon and modified carbon for supercapacitors, integrating both experimental results and theoretical calculations. This review begins by discussing the origins of biomass-derived carbon in supercapacitors, including plant-based, food waste-derived, animal-origin, and microorganism-generated sources. Then, this review presents strategies to improve the performance of biomass-derived carbon in supercapacitors, including heteroatom doping, surface functionalization, and hybrid composite construction. Furthermore, this review analyzes the functions of biomass-derived carbon in supercapacitors both in its pure form and as modified materials. The review also explores composites derived from biomass-based carbon, including carbon/MXenes, carbon/MOFs, carbon/graphene, carbon/conductive polymers, carbon/transition metal oxides, and carbon/hydroxides, providing a thorough investigation. Most importantly, this review offers an innovative summary and analysis of the role of biomass-derived carbon in supercapacitors through theoretical calculations, concentrating on four key aspects: energy band structure, density of states, electron cloud density, and adsorption energy. Finally, the review concludes the future research directions for biomass carbon-based supercapacitors, including the discovery of novel biomass materials, tailoring surface functional groups, fabricating high-performance composite materials, exploring ion transfer mechanisms, and enhancing practical applications. In summary, this review offers a thorough exploration of the sources, functions, and mechanisms of biomass-derived carbon in supercapacitors, providing valuable insights for future research.

biomass-derived carbon↗
DOE OSTI2023

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗