Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Thermodynamic analysis of a two-stage binary-fluid ejector heat pump water heater

Ejector heat pump water heaters (EHPWHs) could significantly increase the thermal efficiency of domestic water heating and reduce greenhouse gas emissions. This study addresses two major technical barriers to using EHPWHs in domestic water heating—low heating cycle coefficient of performance (COP) and low condensation temperatures—using binary fluid pairs as a working fluid in a two-stage ejector system. A comprehensive, geometry-free model of binary-fluid ejectors was built and validated to predict the entrainment ratios of binary-fluid ejectors. A thermodynamic model of a two-stage binary-fluid ejector EHPWH was built to predict the heating cycle COP of EHPWHs. The performance of the EHPWH was theoretically evaluated using HFE7000 and Novec649 as primary fluids and R600 and R1234ze(Z) as secondary fluids. HFE7000/R600 gave the highest heating cycle COP (i.e., 1.356) in producing domestic hot water at 60.0 °C. An optimum evaporation temperature of the primary fluid was identified for the maximum effective entrainment ratio and effective pressure lift ratio of two-stage ejectors. Here, the effective entrainment ratio of the two-stage ejector dominated the heating cycle COP of the EHPWH. Primary fluids with lower latent heats of evaporation and/or secondary fluids with higher latent heats of evaporation yielded higher heating cycle COPs of EHPWHs.

42 ENGINEERING↗

Power System Resilience Enhancement in Typhoons Using a Three-Stage Day-Ahead Unit Commitment

In this work, we propose a three-stage resilient unit commitment model which considers uncertain typhoon paths and line outages to improve the power system resilience against typhoon events. The proposed solution coordinates resources in response to the worst-case scenario for each possible typhoon path. The optimal decision is based on the characterization of the power system schedule into three stages of preventive control, emergency control, and restoration. Preventive control is performed before the typhoon occurs by quickly adjusting the three-stage resilient unit commitment schedule; emergency control is conducted during the typhoon by shedding local loads to meet the power balance, while other control strategies are assumed to be unavailable due to possible interruptions in the communication system; restoration is realized after the typhoon, when resources are optimally dispatched to repair the outages of critical devices and recover the normal operation state of the power system quickly. Considering the typhoon path uncertainty, we have introduced a stochastic model for possible typhoon paths where all possible affected lines along each typhoon path are assumed to be on outage during the typhoon. Accordingly, we explore the strategy for co-optimizing the three stages in unit commitment. The proposed model is tested on the IEEE 118-bus system and the real-world provincial system to verify its effectiveness.

24 POWER TRANSMISSION AND DISTRIBUTION↗

CoREC: Scalable and Resilient In-memory Data Staging for In-situ Workflows

The dramatic increase in the scale of current and planned high-end HPC systems is leading new challenges, such as the growing costs of data movement and IO, and the reduced mean time between failures (MTBF) of system components. In-situ workflows, i.e., executing the entire application workflows on the HPC system, have emerged as an attractive approach to address data-related challenges by moving computations closer to the data, and staging-based frameworks have been effectively used to support in-situ workflows at scale. However, the resilience of these staging-based solutions has not been addressed, and they remain susceptible to expensive data failures. Furthermore, naive use of data resilience techniques such as n-way replication and erasure codes can impact latency and/or result in significant storage overheads. In this article, we present CoREC, a scalable and resilient in-memory data staging runtime for large-scale in-situ workflows. CoREC uses a novel hybrid approach that combines dynamic replication with erasure coding based on data access patterns. It also leverages multiple levels of replications and erasure coding to support diverse data resiliency requirements. Furthermore, the article presents optimizations for load balancing and conflict-avoiding encoding, and a low overhead, lazy data recovery scheme. We have implemented the CoREC runtime and have deployed with the DataSpaces staging service on leadership class computing machines and present an experimental evaluation in the article. Here, the experiments demonstrate that CoREC can tolerate in-memory data failures while maintaining low latency and sustaining high overall storage efficiency at large scales.

97 MATHEMATICS AND COMPUTING↗

Glass composition and solution speciation effects on stage III dissolution

To understand and mitigate the onset of Stage III corrosion of multicomponent oxides waste glasses. Stage III refers to a resumption of the high initial rate of glass dissolution in some glass samples that have otherwise exhibited dissolution at the much lower residual rate for a long time (Stage II). Although the onset of Stage III is known to occur concurrently with the precipitation of particular alteration products, the root cause of the transition is still unknown. Certain glass compositions (notably AFCI) and high pH environmental conditions are also associated with this observed transition.

36 MATERIALS SCIENCE↗

Staging For Wakefield Acceleration Experiment Hardware Development: Fast Kicker and High Power RF Delay Section

This project pursues demonstration of the complete staging of high gradient wakefield acceleration at Argonne Wakefield Accelerator (AWA) facility, which is well aligned with the core mission of AWA and the roadmap laid out for the dielectric wakefield accelerator technology toward future linear colliders. During the project, we have successfully demonstrated the feasibility of the staged short pulse TBA (C. Jing, et al, Nucl. Instrum. Meth. A., 898, 72-76, 2018). We have successfully performed the first over 100MW dielectric power extractor. As the last task, one of the key elements for the drive beam distribution system, the fast kicker, has been built and successfully demonstrated this year too. The staging technology demonstrated in this project is crucial for the 500MeV Demonstrator that is planned at AWA in the next five years. The plan is to use two staged meter long dielectric disk accelerators to achieve 500MeV energy gain within ~10 meter long experimental space. While this SBIR project is closed, we plan to continue to investigate the dielectric accelerator technologies under Euclid's general scientific and commercial interests.

43 PARTICLE ACCELERATORS↗

Zero-Carbon Biofuels: An Optimized Two-Stage System for High Productivity Conversion of CO2 to Liquid Fuels

In MIT’s Zero-Carbon Biofuels work, under ARPAe’s EcoSynBio funding, we capitalized on our previously developed technology of the oleaginous yeast, Yarrowia lipolytica, engineered to produce high titer biodiesel-like lipids and alkanes, and set out to reduce or eliminate CO 2 generation during lipid production. We set out to do this by both engineering Y. lipolytica with the necessary enzymes to allow the generation of reducing equivalents from H 2 , formic acid, or methanol, and, in parallel, installing the non-oxidative glycolysis (NOG) pathway. The goal was that combination of these two would enable stoichiometric conversion of glucose and acetate to biodiesel products. Furthermore, our ARPAe Electrofuels funded research, yielded a very innovative two-stage system where gases comprising CO 2 and H 2 are used for the production of liquid fuels. Acetate is produced from CO 2 and H 2 , via acetogenic fermentation, in the first stage as the intermediary product, then fed to Y. lipolytica in the second stage, for conversion to lipids and alkanes. To increase the commercial competitiveness of the two-stage system, by improvement to the overall productivity, we recently showed that synergistic substrate co-feeding drastically enhances CO 2 fixation rates and set out to explore additional co-substrate pairs, including methanol and formic acid, in order to maximize acetate productivity. Finally, given the attractiveness as a biofuel, we also set out to attempt an important increase in the production of alkanes over lipids in Yarrowia.

10 SYNTHETIC FUELS↗

Evaluating energy justice metrics in early-stage science and technology research using the JUST-R metrics framework

Embedding principles of energy justice throughout all aspects of clean energy technology research and development (R&D) can facilitate a more just energy transition; yet gaps remain in our understanding of how to best integrate energy justice from the earliest R&D stages. The Justice Underpinning Science and Technology Research (JUST-R) metrics framework has been developed to enable early-stage energy researchers to assess and address justice considerations associated with their research, but the impacts of the framework, and others like it, have yet to be evaluated. This study seeks to evaluate the JUST-R metrics framework in terms of its effectiveness and appeal to researchers engaged in early-stage technical R&D using qualitative analyses of documents and workshop transcripts. We find that the metrics framework helps researchers identify problems and potential solutions surrounding the energy justice implications of their work and spurs a change in perspective for researchers, but, simultaneously, there is no evidence of solution follow-through within the evaluation timeframe. Greater institutional support, specialization to research areas, knowledge of energy justice fundamentals, and earlier incorporation of energy justice considerations in research projects arise as factors needed to aid continued use of the framework and pursuit of identified solutions. This evaluation protocol and these findings can serve as a guide for improving other frameworks with similar goals of encouraging sociotechnical engagement in early-stage energy R&D.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Two-Stage Approach for Routing Multiple Unmanned Aerial Vehicles with Stochastic Fuel Consumption

The past decade has seen a substantial increase in the use of small unmanned aerial vehicles (UAVs) in both civil and military applications. This article addresses an important aspect of refueling in the context of routing multiple small UAVs to complete a surveillance or data collection mission. Specifically, this article formulates a multiple-UAV routing problem with the refueling constraint of minimizing the overall fuel consumption for all the vehicles as a two-stage stochastic optimization problem with uncertainty associated with the fuel consumption of each vehicle. The two-stage model allows for the application of sample average approximation (SAA). Although the SAA solution asymptotically converges to the optimal solution for the two-stage model, the SAA run time can be prohibitive for medium- and large-scale test instances. Hence, we develop a tabu search-based heuristic that exploits the model structure while considering the uncertainty in fuel consumption. Extensive computational experiments corroborate the benefits of the two-stage model compared to a deterministic model and the effectiveness of the heuristic for obtaining high-quality solutions.

42 ENGINEERING↗

Numerical Investigation of Two-Stage Vapor Compression System with Simultaneous Vapor and Liquid Injection

Two-stage vapor compression systems can be advantageous over single-stage systems by providing improved system performance, lower discharge temperature and reduced throttling losses. These systems employ various intermediate configurations, such as liquid injection and vapor injection. This paper presents a configuration for a R1234ze(E) two-stage air-conditioning system using a turbo compressor with two injection ports, one for vapor injection and the second for liquid injection. The liquid injection is used to cool the motor and electronics. A component-based representation and solution approach was used to simulate the two-stage compression system with simultaneous vapor and liquid injection at steady state. The turbo compressor was represented using a customized performance map. The condenser and the evaporator were modeled using finite-volume approach. A parametric study was conducted to assess the impact of the following three variables on the system performance: vapor injection ratio, condenser air flow rate, and discharge pipe pressure drop. The simulation results show that as the vapor injection ratio increased, the system performance undergoes a tradeoff between an enhanced subcooling effect (and thus enhanced unit refrigeration capacity) and a decreased suction mass flow rate. Maximum COP occurs when the vapor injection ratio was 0.1. The results also show that as the condenser air flow rate increased, both the capacity and power consumption (including fan power) increased monotonically, and COP increased first and then decreased. At 75% load, the COP improvement at the optimum flow rate was marginally less than 0.5%. Lastly, higher discharge pipe pressure drop increased the discharge pressure. It showed very small effect on the overall system performance at the condition selected for the current study.

component-based steady-state simulation↗

MRI evaluation of pancreatic ductal adenocarcinoma: diagnosis, mimics, and staging

The radiologist’s role in the evaluation of pancreatic ductal adenocarcinoma remains critical in the management of this deadly disease. Imaging plays a vital role in the diagnosis and staging of pancreatic cancer. Although CT is more commonly used for staging pancreatic cancer, MR is increasingly playing an important role in this regard. In our institution, all pancreatic malignancies undergo staging with MRI. In this pictoral essay, we illustrate the MR imaging features of pancreatic ductal adenocarcinoma and its mimics, and we also discuss pearls and pitfalls in MR staging of pancreatic carcinoma.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Primary and post-chemoradiotherapy staging using MRI in rectal cancer: the role of diffusion imaging in the assessment of perirectal infiltration

Purpose: To analyze changes in MRI diagnostic accuracy in main rectal tumor (T) evaluation resulting from the use of diffusion-weighted imaging (DWI), according to the degree of experience of the radiologist. Methods: This is a cross-sectional study of a database including one hundred 1.5 T MRI records (2011–2016) from patients with biopsy-proven rectal cancer, including primary staging and post-chemoradiotherapy follow-up. All cases were individually blindedly reviewed by ten radiologists: three experienced in rectal cancer, three specialized in other areas, and four residents. Each case was assessed twice to detect perirectal infiltration: first, evaluating just high-resolution T2-weighted sequences (HRT2w); second, evaluation of DWI plus HRT2w sequences. Results were pooled by experience, calculating accuracy (area under ROC curve), sensitivity and specificity, predictive values, likelihood ratios, and overstaging/understaging. Histology of surgical specimens provided the reference standard. Results: DWI significantly improved specificity by experienced radiologists in primary staging (63.2% to 75.9%) and, to a lesser extent, positive likelihood ratio (2.06 to 2.87); minimal changes were observed post-chemoradiotherapy, with a slight decrease of accuracy (0.657 to 0.626). Inexperienced radiologists showed a similar pattern, but with slight enhancement post-chemoradiotherapy (accuracy 0.604 to 0.621). Residents experienced small changes, with increased sensitivity/decreased specificity in both primary (69% to 72%/67.2% to 64.7%) and post-chemoradiotherapy (68.1% to 73.6%/47.3% to 44.6%) staging. Conclusions: Adding DWI to HRT2w significantly improved specificity for the detection of perirectal infiltration at primary staging by experienced radiologists and also by inexperienced ones, although to a lesser extent. In the post-neoadjuvant treatment subgroup, only minimal changes were observed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Staged Transcatheter Treatment of Portal Hypoplasia and Congenital Portosystemic Shunts in Children

Purpose: Congenital portosystemic shunts (CPSS) with portal venous hypoplasia cause hyperammonemia. Acute shunt closure results in portal hypertension. A transcatheter method of staged shunt reduction to afford growth of portal vessels followed by shunt closure is reported. Methods: Pressure measurements and angiography in the CPSS or superior mesenteric artery (SMA) during temporary occlusion of the shunt were performed. If vessels were diminutive and the pressure was above 18 mmHg, a staged approach was performed, which included implantation of a tailored reducing stent to reduce shunt diameter by {approx}50 %. Recatheterization was performed approximately 3 months later. If the portal pressure was below 18 mmHg and vessels had developed, the shunt was closed with a device. Results: Six patients (5 boys, 1 girl) with a median age of 3.3 (range 0.5-13) years had CPSS portal venous hypoplasia and hyperammonemia. Five patients underwent staged closure. One patient tolerated acute closure. One patient required surgical shunt banding because a reducing stent could not be positioned. At median follow-up of 3.8 (range 2.2-8.4) years, a total of 21 procedures (20 transcatheter, 1 surgical) were performed. In all patients, the shunt was closed with a significant reduction in portal pressure (27.7 {+-} 11.3 to 10.8 {+-} 1.8 mmHg; p = 0.016), significant growth of the portal vessels (0.8 {+-} 0.5 to 4.0 {+-} 2.4 mm; p = 0.037), and normalization of ammonia levels (202.1 {+-} 53.6 to 65.7 {+-} 9.6 {mu}mol/L; p = 0.002) with no complications. Conclusion: Staged CPSS closure is effective in causing portal vessel growth and treating hyperammonemia.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Feasibility of Percutaneous Intrahepatic Split by Microwave Ablation (PISA) After Portal Vein Embolization for Hypertrophy of Future Liver Remnant: The Radiological Stage-1 ALPPS

PurposeTo assess the feasibility of radiological stage-1 ALPPS, associating liver partition and portal vein ligation for staged hepatectomy, by combining portal vein embolization (PVE) with percutaneous intrahepatic split by ablation (PISA).Materials and MethodsThree patients (mean age 65.0 ± 7.3 years) underwent PVE and PISA. PISA was performed 21 days after PVE by microwave ablation to create a continuous intrahepatic cutting plane. Abdominal CT examinations were performed before and after PVE and PISA. The future liver remnant (FLR) volume was calculated by semiautomatic segmentation, and increase was reported as a percentage of the pre-procedural volume. The FLR/body weight (FLR/BW) ratio was calculated; a ratio greater than 0.8% was considered sufficient for guaranteeing adequate liver function after surgery. The liver function before and after PISA was also evaluated by 99mTc-mebrofenin hepatobiliary scintigraphy. Patients’ laboratory tests, performance status, ability to walk were assessed before and after PVE and PISA procedures.ResultsNo procedure-related complications were recorded. The FLR volume increase in each patient was 42.0, 33.1 and 30.4% within 21 days of PVE and 109.3, 68.1 and 71.7% within 10 days after PISA. The FLR/BW ratios were 0.76, 0.66, 0.63% and 1.13, 0.83, 0.83% after PVE and PISA procedures, respectively. Two patients underwent successful right hepatectomy; in one patient, despite 1.13% FLR/BW, surgery was not performed because of the absolute rejection of blood transfusion due to the patient’s religious convictions.ConclusionRadiological stage-1 ALPPS is a feasible, minimally invasive option to be further investigated to become an effective alternative to surgical stage-1 ALPPS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Obtaining Diluent for High-Enrichment Uranium Hexafluoride in Two- and Three-Stage Cascades

The production of diluent for high-enrichment uranium in a cascade from waste uranium hexafluoride with unknown {sup 234}U content is examined. To secure high-quality diluent and reduce separative work consumption, it is proposed that the diluent be produced in two stages with sorting and extraction of the best intermediate produced in terms of {sup 234}U concentration after the first stage. The worst intermediate products are best used at the second stage to obtain low-enrichment uranium hexafluoride satisfying ASTM C 996-15 specifications. In addition, the obtained new wastes can be used in a third stage to produce diluent with low {sup 234}U concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Acute toxicity of copper to the larval stage of three species of ambystomatid salamanders

Copper (Cu) appears to be consistently more toxic to anuran species relative to other vertebrate taxa. There are limited Cu toxicity data for salamanders; of the few studies conducted on salamanders, most examined Cu effects on the embryonic, but not the larval, stage. We performed acute toxicity experiments, to quantify LC50s, on Harrison stage 46 larvae (free swimming hatchlings with egg yolk completely absorbed) of three ambystomatid salamander species. Each LC50 experiment used exposure concentrations of 10, 20, 30, 40, 50, and 60 µg/L with 10 replicates per concentration each containing one larva. We found very high toxicity for all species compared to previously published research on the embryo stage. Specifically, the 4-d LC50s for Ambystoma tigrinum and A. opacum were 35.3 and 18.73 µg/L, respectively. The same Cu concentrations caused similar toxicity to A. talpoideum (LC50 = 47.88 µg/L), but exposures required up to 48 d to elicit the same level of mortality. A time-to-event analysis indicated that time to mortality was significantly affected by Cu concentration. Additionally, for A. talpoideum, we observed that elevated levels of Cu decreased growth rate. Finally, comparisons with previously reported Cu toxicity for embryos suggest that, as with fish, Cu may be more toxic to larval salamander stages than for embryos. Further, our data suggest that Cu is an important environmental contaminant that deserves increased scrutiny on the potential for population-level effects where contamination has occurred in wetlands and streams inhabited by salamanders.

59 BASIC BIOLOGICAL SCIENCES↗

Two-Stage Cryogenic HEMT-Based Amplifier for Low-Temperature Detectors

To search for dark matter candidates with masses below $\mathcal{O}$ (MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is developing novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1–100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogenic HEMT-based amplifier with an estimated charge resolution approaching the single-electron level. A low-capacitance (~ 1.6 pF) HEMT is used as a buffer stage at T = 10 mK to mitigate effects of stray capacitance at the input. The buffered signal is then amplified by a higher-capacitance (~ 200 pF) HEMT amplifier stage at T = 4 K. Importantly, the design of this amplifier makes it usable with any insulating material—allowing for rapid prototyping of a variety of novel detector materials. Here, we present the two-stage cryogenic amplifier design, preliminary voltage noise performance, and estimated charge resolution of 7.2 electrons.

47 OTHER INSTRUMENTATION↗

Stages of Mechanical Alloying in Systems with Different Solubility Cu–Zn and Au–Co in the Case of Cold and Low-Temperature Deformation by Torsion Under Pressure

Methods of X-ray structural analysis and durometry, as well as electron microscopy were used to identify the stages of mechanical alloying in the case of torsion under high quasi-hydrostatic pressure on Bridgman anvils in the Cu–Zn and Au–Co systems that have different mutual solubility and enthalpy of mixing. It was established that decrease in temperature of mechanical alloying from room temperature (cold deformation) to the boiling temperature of liquid nitrogen (80 К, low-temperature deformation) has a considerable impact on mechanical alloying at different processing stages and on characteristics of an alloy synthesized by deformation. In the Cu–Zn system, when the ratio of powder components corresponds to the solid solution of α-brass in equilibrium state, as deformation increased, one observed consecutive change of evolution stages of the powder mix to the state of copper-based solid solution. At the same time, when processing temperature decreases, larger deformation is required to achieve analogous structural changes. In the Au–Co system characterized by absence of solubility at room and lower temperatures, one also observes the stages of powder mix evolution with the increase in deformation. However, complete dissolution occurs in the case of processing at 80 К, while larger deformation is required in the case of increase in mechanical alloying temperature. The paper examines possible mechanisms of solid solution formation in the system of components that are mutually insoluble under equilibrium conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-world outcomes in patients with unresected stage III non-small cell lung cancer

This study examined real-world clinical outcomes such as progression-free survival (PFS), time to metastasis (TTM), overall survival (OS), and health-related quality of life (HRQOL) in patients with unresected stage III non-small cell lung cancer (NSCLC) treated in the community setting. A retrospective review of medical records extracted from 10 US community oncology practices was conducted. Eligible patients were adults diagnosed with stage III NSCLC from 1/1/2011 to 3/1/2016 without evidence of surgical resection within 6 months after stage III NSCLC diagnosis (index date). PFS, OS, and TTM were assessed from the index date, and were analyzed using Kaplan–Meier and Cox regression analyses. HRQOL was assessed for a subset of patients using a patient-reported measure, the 86-item Patient Care Monitor (PCM). Linear mixed models (LMM) were used to assess the impact of patient characteristics and change in PCM scores associated with progression. Among the sample of 478 patients, median PFS (95% confidence interval) was 10 months (9–11), median OS was 20 months (17–22), and median TTM was 30 months (23–45). Most patients (58.2%) experienced disease progression, which the LMM showed to be associated with significant worsening of physical symptoms and psychological states (p < 0.001). This study documented PFS and OS consistent with published literature. The majority of patients experienced disease progression, which was associated with worsening of HRQOL. These findings highlighted the need for better therapeutic options in patients with unresected stage III NSCLC with potential to improve patient outcomes and HRQOL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗