Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shadows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Investigation of the detection and monitoring of forest insect infestations in the Sierra Nevada Mountains of California

The author has identified the following significant results. In earlier reports it has been indicated that it is possible to delineate areas of lodgepole pine timber mortality into three degrees of damage from enlarged ERTS-1 color composites; light, medium, and heavy. It can also be confidently reported that it is now possible to detect all major areas of lodgepole pine defoliated by the needle miner. It has also been confirmed, through ground checking and helicopter observation that previous designation of the following features have been consistently accurate: timbered vs non-timbered areas; timber types; damaged vs undamaged areas; lakes, dome shadows which resemble lakes, mountain meadows, pasture and agricultural land, desert; riparian vegetation; and glaciers.

Hall, R. C.↗

Coordinated observations of chemical releases from the ground and from aircraft at high latitudes

The ground observations of the Na-Li trail released from a Nike-Apache rocket obtained by the Geophysical Institute are discussed. By using the nominal trajectory for a 60 pound payload and the particular rocket, a best fit trajectory was determined based on the Ester Dome photographic data, launch time and earth-sun geometrical shadow height. From these calculations, the height of obvious features along the trail were determined and their velocity estimated. A clockwise rotation of the velocity vector with increasing height was observed. Velocities deduced at various altitudes were then compared to meter radar data also obtained during this period. The comparisons of these two neutral wind measurements techniques are satisfactory.

Romick, G. J.↗

Investigation of a lineament expressed in an oblique Apollo 9 photograph

The author has identified the following significant results. A linear topographic feature, referred to as the New York Mountains lineament, was recognized in an oblique Apollo 9 photograph to extend from the Providence Mountains of California to near Lake Mead, Arizona. In subsequent vertical ERTS-1 imagery this feature was found to have vague and indistinct expression. A study was conducted to determine the possible geologic origin(s) of the lineament and to explain its anomalous expression in the Apollo 9 photograph. The results suggest that the apparent expression of the lineament is due to a combination of the oblique view of the Apollo photograph, low sun angle illumination of southeast facing slopes, shadowing of northwest facing slopes, and linear snow line along the southeastern flank of the New York Mountains. No geologic or structural causes for the lineament have been found.

Liggett, M. A.↗

Spectral characteristics of microwave bursts

Various statistical parameters of the peak flux-density spectra of solar microwave bursts have been examined for 1968 to 1971 based on spectra obtained from fixed-frequency observations at 245, 606, 1415, 2695, 4995, 8800, 15400, and 35000 MHz. For bursts having a centimeter-radiation component, the great majority were found to have type C spectra (single spectral maximum) in the L-band to K-band range. A small percentage had miscellaneous type spectra (more than one spectral maximum) and another small percentage had what might be taken as thermal spectra. Even for gradual rise-and-fall bursts often thought to be thermal origin, less than 20 percent were found to have spectra which could be classified as thermal. The relationship between the burst spectral maximum (f sub max) and the photospheric magnetic field strength of the region associated with the burst was examined. A tendency for greater correlation at higher f sub max for stronger magnetic fields is noted; however, this is over-shadowed by the overall high correlations for those regions having strong photospheric magnetic fields.

Guidice, D. A.↗

Satellite-tracked cumulus velocities

The research indicates that extreme caution must be exercised in converting cloud velocities into winds. The motion of fair-weather cumuli obtained by tracking their shadows over Springfield, Missouri revealed that the standard deviation in the individual cloud motion is several times the tracking error. The motion of over-ocean cumuli near Barbados clearly indicated the complicated nature of cumulus velocities. Analysis of whole-sky images obtained near Tampa, Florida failed to show significant continuity and stability of cumulus plumes, less than 0.3 mile in diameter. Cumulus turrets with 0.3 to 2 mile in size appear to be the best target to infer the mean wind within the subcloud layers. Cumulus or stratocumulus cells consisting of x number of turrets do not always move with wind. The addition and deletion of turrets belonging to a specific cell appear to be the cause of the erratic motion of a tracer cell. It may by concluded that the accuracy of wind estimates is unlikely to be better than 2m/sec unless the physical and dynamical characteristics of cumulus motion is futher investigated.

Fujita, T. T.↗

Remote detection of ocean features in the Lesser Antilles using ERTS-1 data

The author has identified the following significant results. Photographic data received from the ERTS-1 satellite over the Lesser Antilles Islands show distinct ocean features on the leeward side of each island. Attempts to relate these features to ocean eddy formations with the aid of ground truth data proved unsuccessful. However, surface and upper air wind data indicate a good correlation with the size, shape, and downwind extent of the ocean features. Studies to date indicate strongly that these features result from horizontal differences in sea surface roughness due to the wind shadow effect of the islands. The results suggest that horizontal variations in the reflectance of the sea surface will make remote sensing of the ocean mixed layer more difficult than previously anticipated. The surface reflection seems to be large enough to mask the smaller horizontal variations in backscattered energy from the mixed layer.

Hanson, K. J.↗

Stereo study as an aid to visual analysis of ERTS and Skylab images

The author has identified the following significant results. The parallax on ERTS and Skylab images is sufficiently large for exploitation by human photointerpreters. The ability to view the imagery stereoscopically reduces the signal-to-noise ratio. Stereoscopic examination of orbital data can contribute to studies of spatial, spectral, and temporal variations on the imagery. The combination of true stereo parallax, plus shadow parallax offer many possibilities to human interpreters for making meaningful analyses of orbital imagery.

Vangenderen, J. L.↗

Reflectance of vegetation, soil, and water

The author has identified the following significant results. The majority of the rangelands of Hidalgo County, Texas are used in cow-calf operations. Continuous year-long grazing is practiced on about 60% of the acreage and some type of deferred system on the rest. Mechanical brush control is used more than chemical control. Ground surveys gave representative estimates for 15 vegetable crops produced in Hidalgo County. ERTS-1 data were used to estimate the acreage of citrus in the county. Combined Kubleka Munk and regression models, that included a term for shadow areas, gave a higher correlation of composite canopy reflectance with ground truth than either model alone.

Wiegand, C. L.↗

Stereo study as an aid to visual analysis of ERTS and Skylab images

The author has identified the following significant results. The parallax on ERTS and Skylab images is sufficiently large for exploitation by human photointerpreters. The ability to view the imagery stereoscopically reduces the signal-to-noise ratio. Stereoscopic examination of orbital data can contribute to studies of spatial, spectral, and temporal variations on the imagery. The combination of true stereo parallax, plus shadow parallax offer many possibilities to human interpreters for making meaningful analyses of orbital imagery.

Vangenderen, J. L.↗

Lunar polarization studies at 3.1 mm wavelength

Observations of the distribution of linearly polarized lunar thermal emission were made at a wavelength of 3.1 mm with The University of Texas 4.88 m parabolic reflector (0.042 deg HPBW). A shadow corrected, rough surface, thermal emission model for a homogeneous moon was least-squares-fitted to the polarization data. Results indicate an effective lunar dielectric constant of 1.34 plus or minus 0.04 with surface roughness characterized by a standard deviation of 17 (plus or minus 5) deg for surface slopes with a normal probability density, independent of lunar phase. A comparison of these results with published values at other wavelengths suggests that the effective lunar dielectric constant, as obtained by lunar emission measurements, decreases with decreasing wavelength of observation. This wavelength dependence may be interpreted in terms of an inhomogeneous surface and/or a surface that possesses intermediate scale surface roughness.

White, T. L.↗

Plasma sheet at lunar distance - Characteristics and interactions with the lunar surface

The plasma sheet at lunar distance is investigated with the use of data from the charged particle lunar environment experiment (CPLEE), complemented with data from the Explorer 35/ARC magnetometer. It is shown that the presence of the lunar surface does not appreciably affect measurements of the plasma sheet characteristics by the lunar-based CPLEE instrument. In particular, the lunar surface generally does not shadow plasma sheet particles. This may be due to rapid random passage (greater than 40 km/sec) of magnetotail field lines with respect to the lunar surface or to diffusion of plasma sheet electrons into the flux tubes in contact with the lunar surface. The plasma sheet is generally observed as a rapid increase in observed particle fluxes and a simultaneous decrease in field strength. A statistical analysis of the CPLEE data shows that the plasma sheet in the midnight sector has a thickness of 5 R sub E plus or minus 2 R sub E. Geomagnetic activity reduces the probability of encounters between the moon and the plasma sheet.

Rich, F. J.↗

Observations of interplanetary plasma waves, spacecraft noise, and sheath phenomena on Imp 7

The Imp 7 plasma wave instrument measures electric and magnetic wave components of plasma oscillations over the frequency range from 10 Hz to 100 kHz. The instrumentation and relevant external characteristics of the spacecraft that appear to be responsible for some in-flight disturbance effects are briefly described. It is shown that as each one of the 16 solar panel flats rotates into shadow or sunlight, the array transients produce fluctuating magnetic fields that are detected on the magnetic loop mounted 3.4 m from the spacecraft. These transients occur 16 times per spin period, and the corresponding magnetic noise has a high frequency on the rapidly spinning Imp 7 spacecraft. The analysis suggests that some Imp magnetic threshold levels measured 3-4 m from the spacecraft are determined by the solar array current transient effects associated with the discrete 16-sided geometry of the spacecraft. The geometry also influences the response of the electric dipole antenna by modulating the sheath.

Scarf, F. L.↗

Apollo 16 soils - Grain size analyses and petrography

Soils from South Ray Crater, North Ray Crater, and the interray area of Station 10 have a similar provenance, containing breccia fragments of low to medium metamorphic grade and low light/dark lithic fragment ratios; these appear to be characteristic of the Cayley Formation. The primary difference between soils possibly derived from North Ray and South Ray craters is in the agglutinate content. A soil from Stone Mountain (Station 4) is characterized by breccia fragments of medium to high metamorphic grade and a high light/dark lithic fragment ratio; this soil may be derived from the Descartes Formation. Differences between the selenomorphic units, the Descartes and Cayley formations, may be lithologic as well as structural. The mean grain size varies from 84 to 280 microns, and all of the samples are poorly to very poorly sorted. There appears to be a relation between the sorting, grain size, and agglutinate content, with the finer-grained, better sorted soils containing more than 30% agglutinates. 'Shadowed' soils, collected close to large boulders, are similar in all respects to the 'reference' soils collected at least 5 m from the boulders.

Heiken, G. H.↗

Mariner 10 Mercury encounter

Mariner 10's closest approach to Mercury on Mar. 29, 1974 occurred on the dark side of the planet at a range of approximately 700 kilometers. The spacecraft trajectory passed through the shadows of both the sun and earth. Experiments conducted included magnetic fields, plasma and charged particle studies of the solar wind interaction region, television photography, extreme ultraviolet spectroscopy of the atmosphere, the detection of infrared thermal radiation from the surface, and a dual-frequency radio occultation in search of an ionosphere.

Dunne, J. A.↗

Pyramidal structures on Mars

Triangular and polygonal pyramid like structures have been observed on the Martian surface. Located in the east central portion of Elysium Quadrangle (MC-15), these features are visible on the Mariner 9 photographs. B frames MTVS 4205-3 DAS 07794853 and MTVS 4296-24 DAS 12985882. The structures cast triangular and polygonal shadows. Steep-sided volcanic cones and impact craters occur only a few kilometers away. The mean diameter of the triangular pyramidal structures at the base is approximately 3.0 km, and the mean diameter of the polygonal structures is approximately 6.0 km. The observed Martian structures tend to line up suggesting joint or fault control. However, they do not appear to be controlled by the visible faults. The structures appear to be either wind-faceted volcanic cones and blocks or solidified blocks which have been rotated in semiconsolidated lava.

Gipson, M., Jr.↗

Low-profile landing-gear assembly

Assembly of cylinders, links, actuators, and gears permits landing-gear unit to be retracted into shadow of main engine intake ducts of supersonic transport aircraft. This is accomplished without adding to frontal area of aircraft or appreciably increasing total aircraft drag.

Harper, P. M.↗

Cryogenic thermal control technology summaries

A summarization and categorization is presented of the pertinent literature associated with cryogenic thermal control technology having potential application to in-orbit fluid transfer systems and/or associated space storage. Initially, a literature search was conducted to obtain pertinent documents for review. Reports determined to be of primary significance were summarized in detail. Each summary, where applicable, consists of; (1) report identification, (2) objective(s) of the work, (3) description of pertinent work performed, (4)major results, and (5) comments of the reviewer (GD/C). Specific areas covered are; (1) multilayer insulation of storage tanks with and without vacuum jacketing, (2) other insulation such as foams, shadow shields, microspheres, honeycomb, vent cooling and composites, (3) vacuum jacketed and composite fluid lines, and (4) low conductive tank supports and insulation penetrations. Reports which were reviewed and not summarized, along with reasons for not summarizing, are also listed.

Stark, J. A.↗

Study of the detail content of Apollo orbital photography

The development and application of image evaluation methods for assessing the detail content of Apollo orbital photography was demonstrated. Edge analysis using shadow to sunlight edges interior to craters was successfully used to evaluate the fine detail content of Apollo 15, 16, and 17 imagery. A method for evaluating tone quality was developed using a gain factor as a function of object contrast and average exposure level that can be related to object detectability.

Kinzly, R. E.↗