Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Methods for correcting microwave scattering and emission measurements for atmospheric effects

The author has identified the following significant results. Algorithms were developed to permit correction of scattering coefficient and brightness temperature for the Skylab S193 Radscat for the effects of cloud attenuation. These algorithms depend upon a measurement of the vertically polarized excess brightness temperature at 50 deg incidence angle. This excess temperature is converted to an equivalent 50 deg attenuation, which may then be used to estimate the horizontally polarized excess brightness temperature and reduced scattering coefficient at 50 deg. For angles other than 50 deg, the correction also requires use of the variation of emissivity with salinity and water temperature.

Komen, M.↗

Increased rate of response of the pituitary-adrenal system in rats adapted to chronic stress

The response and adaptation of the pituitary-adrenal system to chronic stresses was investigated. These included individual caging, confinement, and exposure to cold for varying periods of time. Studies were carried out demonstrating that during the period of adaptation when plasma corticosterone concentrations returned toward their prestress level despite continued exposure to the stressor, the animals responded to additional stimuli of ether for 1 min, a saline injection, or release from confinement with a faster increase (within 2.5 min) in plasma corticosterone than controls (10 min). It is concluded that during adaptation to a chronic stress the pituitary-adrenal system is not inhibited by the circulating steroid level but is actually hypersensitive to additional stimuli.

Sakellaris, P. C.↗

Seasat-A - A product of user interests

The paper describes how user requirements were integrated into the development of the Seasat-A program and shows how user requirements influenced sensor selection, mission planning, satellite systems design, and the end-to-end data system. User requirements included the measurement of ocean topography, surface winds, gravity waves, surface temperature, sea ice, salinity, and surface pressure. Particular attention is paid to the selection of sensors: compressed pulse radar altimeter, synthetic aperture imaging radar, microwave wind scatterometer, visible/infrared radiometer, and multispectral microwave radiometer.

Mccandless, S. W., Jr.↗

Skylab analysis of San Francisco Bay

The distribution and volume of sediment present in suspension during the Skylab 4 overpass for San Pablo Bay and the Carquinez Strait is studied along with the movement and eventual distribution of both natural and dredged sediment in San Francisco Bay. The most useful Skylab sensor film is found to be the S-190B color photography. Changes in temperature, dissolved oxygen, pH, salinity, and pollutants information simultaneously collected are correlated with the spectral differences observed in the various Skylab data. The techniques outlined should be applicable for coastal and estuarine process studies in other areas. A suspensate concentration of about 2 mg/liter is quite sufficient to tag a surface current system, and the surface structure of currents with over 250 mg/liter can be imaged by using progressively longer wavelength filters.

Steller, D. D.↗

Satellite observations of snow and ice with an imaging passive microwave spectrometer

The scanning microwave spectrometer (SCAMS) on the Nimbus-6 satellite continuously maps the terrestrial surface with a resolution of about 150 km at 22.235 and 31.400 GHz. SCAMS observes at six angles besides nadir, yielding brightness temperatures which are a function of the distribution and character of various types of snow and ice, including microstructure and subsurface profiles in refractive index, loss (moisture or salinity), and temperature. Spectral signatures exhibiting interesting topographical structure have been observed. To aid in the interpretation of these data, a model was developed to describe the propagation of microwave intensity in a scattering medium characterized by three-dimensional random fluctuations of refractive index in addition to nonrandom variations in permittivity, temperature, and loss. The model combines Maxwell's equations in the Born approximation with radiative-transfer theory; this approach yields the variation of intensity with polarization, direction, and position.

Fisher, A. D.↗

An integrated approach to the remote sensing of floating ice

Review article on remote sensing applications to glaciology. Ice parameters sensed include: ice cover vs open water, ice thickness, distribution and morphology of ice formations, vertical resolution of ice thickness, ice salinity (percolation and drainage of brine; flushing of ice body with fresh water), first-year ice and multiyear ice, ice growth rate and surface heat flux, divergence of ice packs, snow cover masking ice, behavior of ice shelves, icebergs, lake ice and river ice; time changes. Sensing techniques discussed include: satellite photographic surveys, thermal IR, passive and active microwave studies, microwave radiometry, microwave scatterometry, side-looking radar, and synthetic aperture radar. Remote sensing of large aquatic mammals and operational ice forecasting are also discussed.

Campbell, W. J.↗

Intravascular bubbles associated with intravenous injections and altitude

Ultrasonically detected microbubbles were more abundant in the pulmonary artery of dogs intravenously injected with 10 ml of saline than in the same noninjected control during 10,000 ft (3,048 m), 20,000 ft (6,096 m), and 40,000 ft (12,121 m) exposures. Continuous intravenous (i.v.) drip infusions also introduced many small bubbles. Since they may serve as 'nuclei' for visible intravascular bubble formation, are sometimes associated with decompression sickness, and are additionally considered undesirable, it would appear prudent to minimize i.v. injections immediately before flights. However, a 10-min delay before ascent wil reduce their number and a 60-min delay will insure their almost complete absence. Also, slow ascent, a 1-h denitrogenation time, or use of a degassed solution will help reduce their total number.

Cooke, J. P.↗

Red River chloride remote sensing study

Side looking radar, infrared thermal imagery and color photography, together with a few examples of black and white panoramic photos, are used to supplement information on the natural saline pollution problem that is hydrologically and geologically oriented. The study area was explored concurrently by ground methods and a reasonably good understanding of hydrogeological conditions has been achieved. Examples of the products acquired, their interpretation, and use techniques are included.

Source record↗

A three-dimensional, time-dependent model of Mobile Bay

A three-dimensional, time-variant mathematical model for momentum and mass transport in estuaries was developed and its solution implemented on a digital computer. The mathematical model is based on state and conservation equations applied to turbulent flow of a two-component, incompressible fluid having a free surface. Thus, bouyancy effects caused by density differences between the fresh and salt water, inertia from thare river and tidal currents, and differences in hydrostatic head are taken into account. The conservation equations, which are partial differential equations, are solved numerically by an explicit, one-step finite difference scheme and the solutions displayed numerically and graphically. To test the validity of the model, a specific estuary for which scaled model and experimental field data are available, Mobile Bay, was simulated. Comparisons of velocity, salinity and water level data show that the model is valid and a viable means of simulating the hydrodynamics and mass transport in non-idealized estuaries.

Pitts, F. H.↗

Three-dimensional vector modeling and restoration of flat finite wave tank radiometric measurements

The three-dimensional vector interaction between a microwave radiometer and a wave tank was modeled. Computer programs for predicting the response of the radiometer to the brightness temperature characteristics of the surroundings were developed along with a computer program that can invert (restore) the radiometer measurements. It is shown that the computer programs can be used to simulate the viewing of large bodies of water, and is applicable to radiometer measurements received from satellites monitoring the ocean. The water temperature, salinity, and wind speed can be determined.

Truman, W. M.↗

Ground water recharge to the aquifers of northern San Luis Valley, Colorado: A remote sensing investigation

The author has identified the following significant results. Ground water recharge to the aquifers of San Luis Valley west of San Luis Creek was primarily from ground water flow in the volcanic aquifers of the San Juan Mountains. The high permeability and anisotropic nature of the volcanic rocks resulted in very little contrast in flow conditions between the San Juan Mountains and San Luis Valley. Ground water recharge to aquifers of eastern San Luis Valley was primarily from stream seepage into the upper reaches of the alluvial fans at the base of the Sangre de Cristo Mountains. The use of photography and thermal infrared imagery resulted in a savings of time and increase in accuracy in regional hydrogeologic studies. Volcanic rocks exhibited the same spectral reflectance curve as sedimentary rocks, with only the absolute magnitude of reflectance varying. Both saline soils and vegetation were used to estimate general ground water depths.

Lee, K.↗

Orbital construction demonstration study. Volume 1: Executive summary

A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA), that can be used for technology growth and verification, and as the construction facility for a variety of large structures is presented. The OCDA design includes a large work platform, a rotating manipulator boom, a 250 kw solar array, and a core module of subsystems with a total mass of 37,093 kg, that can be assembled in three shuttle flights. An analysis of OCDA continued utility potential indicates that a shuttle tended platform with 250 kW of power can effectively be used to construct highly beneficial antenna systems and large demonstration articles that advance solar power satellite technologies. The construction of 100 m parabolic reflectors for use as a radiometer for measuring soil moisture and water salinity was found to be within the capabilities of OCDA concept. With 252 fixed beams for high population centers, and 16 scanning beams for rural areas, the antenna has the potential to significantly improve U.S. space based communications systems. The OCDA, that is slightly increased in size, was found adequate to build a large 2 MW solar array which, when coupled to a transmit antenna, demonstrate power transfer from space to ground.

Source record↗

Investigation of environmental change pattern in Japan. Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. It was confirmed that band 4 and 5 had some information as to the sea surface, such as spreading of coastal waters or eddy-like motion of surface water. It was concluded that the front line along the coast from Kumano-nada to Shiono-misaki in the monochromatic prints and in the pseudocolor images was a boundary between coastal waters and offshore water. Most of Ise Bay was covered by polluted water, having salinity values less than 30%, high water color scale of 6 to 8, and transparency less than 5 m.

Maruyasu, T.↗

LANDSAT menhaden and thread herring resources investigation

The author has identified the following significant results. The relationship between the distribution of menhaden and selected oceanographic parameters (water color, turbidity, and possibly chlorophyll concentrations) was established. Similar relationships for thread herring were not established nor were relationships relating to the abundance of either species. Use of aircraft and LANDSAT remote sensing instruments to measure or infer a set of basic oceanographic parameters was evaluated. Parameters which could be accurately inferred included surface water temperature, salinity, and color. Water turbidity (Secchi disk) was evaluated as marginally inferrable from the LANDSAT MSS data and chlorophyll-a concentrations as less than marginal. These evaluations considered the parameters only as experienced in the two test areas using available sensors and statistical techniques.

Kemmerer, A. J.↗

Quantitative evaluation of water bodies dynamic by means of thermal infrared and multispectral surveys on the Venetian lagoon

Surveys employing a two channel Daedalus infrared scanner and multispectral photography were performed. The spring waning tide, the velocity of the water mass, and the types of suspended matter were among the topics studied. Temperature, salinity, sediment transport, and ebb stream velocity were recorded. The bottom topography was correlated with the dynamic characteristics of the sea surface.

Alberotanza, L.↗

Lidar: A laser technique for remote sensing

Experimental airborne lidar systems proved to be useful for shallow water bathymetric measurements, and detection and identification of oil slicks and algae. Dye fluorescence applications using organic dyes was studied. The possibility of remotely inducing dye flourescence by means of pulsed lasers opens up several hydrospheric applications for measuring water currents, water temperature, and salinity. Aerosol measurements by lidar are also discussed.

Wilkerson, T. D.↗