Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflectometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Simplified Procedure for Estimating Epitaxy of La2Zr2O7-Buffered NiW RABITS Using XRD

Abstract A procedure is developed for assessing the epitaxy of La(2-x)Zr(2+x)O(7) (LZO) layers on NiW RABITS. Comparing XRD patterns (theta / 2-theta scans and 2D rocking curves) of LZO films of known thickness (ellipsometry or reflectometry measurements) with those of standard samples (100% epitaxial LZO film and an isotropic LZO pellet of known density), we estimate the epitaxial (EF), and polycrystalline (PF) fractions of LZO within the layer. The procedure was tested using MOD-LZO(100 nm)/NiW tape samples with varied from 3 to 90% (reproducibly prepared by varying the humidity of Ar-5%H2 gas during heat treatment). A qualitative agreement with RHEED and quantitative (within 10%) agreement with the EBSD results was shown. Correlation between EF and Jc in 600 nm thick YBCO layer deposited on MOD-LZO/NiW using thermal coevaporation enables us to impose the EF=80% margin on the quality of LZO layer for the particular conductor architecture.

36 MATERIALS SCIENCE↗

Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets

High-temperature superconductors such as REBa 2 Cu 3 O 7-x (REBCO, RE = rare earth) can generate strong magnetic fields that are promising for applications in particle accelerators and compact fusion reactors. Traditionally, voltage taps are installed in superconducting magnets to measure the voltage signals due to resistive transitions. The voltage-tap-based diagnostics is important for the development of magnet technology as it can help pinpoint the locations in the magnet windings that limit the magnet performance. The architecture of the multi-tape REBCO cable such as CORC wires, however, makes it difficult to apply the voltage-tap-based diagnostics to identify the locations of resistive transitions. Distributed fiber optic sensing (DFOS) has the potential to address this issue. In this paper, we report the measurements of thermal strain along a CORC wire based on optical frequency domain reflectometry with a maximum spatial resolution of 0.65 mm and a temporal resolution of 10 Hz. The optical fiber is co-wound with the CORC wire that is epoxy impregnated. During the test, current was increased until a resistive transition occurred in the conductor. The spectrum shift of the reflected light along the fiber was recorded. The results suggested that with proper thermal isolation from the cryogen, DFOS can be used to identify the locations of resistive transitions in CORC wires and magnets. In conclusion, the results will allow a better understanding of the causes of resistive transitions in REBCO conductors and magnets, which will help improve the REBCO magnet technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Circular Corrugated Miter Bend and Gap Losses for Broadband Frequency Applications

Circular corrugated waveguides are often used in fusion applications at single, multiple, or broadband millimeter frequencies due to their low ohmic loss, expected large frequency bandwidth, and direct coupling to free-space Gaussian modes. For single-frequency corrugated waveguide systems, transmission line components can be optimized to the desired frequency. For broadband or multiple-frequency applications, this is not possible. The goal of this paper is to demonstrate that the frequency bandwidth of circular corrugated waveguides can be compromised by diffraction losses to miter bends and gaps. It is shown that if the corrugation depth differs significantly from λ /4, a theory can substantially underpredict the gap and miter bend losses. The simulations are also shown to compare favorably to experimental measurements. To improve the transmission line performance in large frequency bandwidth systems, such as 33–165 GHz reflectometry, reducing the number of miter bends may, therefore, be necessary. For the improvement of performance in narrower frequency bandwidth or multiple-frequency systems, especially high-powered systems, wavelength-dependent techniques may be applicable. Furthermore, one such application is shown for a Bragg reflection technique to reduce the thermal load to insulating ceramic rings in a dc break component for multiple-frequency ITER electron cyclotron heating transmission lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multidimensional Visualization of MHD and Turbulence in Fusion Plasmas [Multi-dimensional Visualization of Turbulence in Fusion Plasmas]

Here, quasi-optical imaging at sub-THz frequencies has had a major impact on fusion plasma diagnostics. Mm-wave imaging reflectometry utilizes microwaves to actively probe fusion plasmas, inferring the local properties of electron density fluctuations. Electron cyclotron emission imaging is a multichannel radiometer that passively measures the spontaneous emission of microwaves from the plasma to infer local properties of electron temperature fluctuations. These imaging diagnostics work together to diagnose the characteristics of turbulence. Important quantities such as amplitude and wavenumber of coherent fluctuations, correlation lengths and decor relation times of turbulence, and poloidal flow velocity of the plasma are readily inferred.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-Time Monitoring of Temperature Rises of Energized Transformer Cores With Distributed Optical Fiber Sensors

Real-time temperature mapping that solves local overheating problems is important for obtaining an optimized thermal design for high-efficiency power transformers. Internal temperature monitoring of operating power transformers can also be leveraged for asset monitoring applications targeting at fault detection enabling condition-based maintenance. Transformers present a variety of challenging sensing environments such as high levels of electromagnetic interference and limited space for conventional sensors to operate. Immersion of power transformers in insulation oils for thermal management during operation and the presence of relatively large and time-varying electrical and occasional magnetic fields make sensing technologies requiring electrical wires or active power at sensing locations highly undesirable. In this work, we investigate thermal response of a standard telecom fiber instrumented on compact transformer cores by using an optical frequency-domain reflectometry scheme. As a result, correlation between conventional temperature sensing methods and fiber-optic sensing results as well as tradeoffs between spatial resolution and temperature measurement accuracy is discussed and spatially resolved real-time monitoring of temperatures in energized transformers is experimentally demonstrated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts

Abstract This work presents a pseudo-two-dimensional proton exchange membrane fuel cell (PEMFC) model incorporating Nafion ionomer structure–property relationships in the cathode catalyst layer (CL) to capture and explain losses at low Pt loading. Structural data from neutron reflectometry and thin film Nafion conductivity measurements predict variations in the oxygen diffusion coefficient and ionic conductivity with changing CL ionomer thickness and Pt loading. By including these structure–property relationships, predicted polarization curves agree closely with previously published experimental data from cells with Pt loadings between 0.025 and 0.2 mg/cm2. Results demonstrate that structure–property relationships based on physically measurable ionomer and CL properties provide a feasible interpretation of PEMFC CL phenomena for a range of Pt loadings and help explain previously unaccounted-for losses at low Pt. Results also show that simulations must account for surface species coverage variations in order to properly capture the kinetic losses. Finally, results suggest that an increase in ionomer thickness surrounding the C/Pt surfaces may lead to improved cell performance due to improved ionic conductivity.

Electrochemistry↗

Transition to Online Cable Insulation Condition Monitoring

Nuclear power plant cables were originally qualified for 40 year life and generally have not required specific test verification to assure service availability through the initial plant qualification period. However, license renewals to 60 and 80 years of operation require a cable aging management program that depends on some form of test and verification to assure fitness for service. Environmental stress (temperature, radiation, chemicals, water, and mechanical) varies dramatically within a nuclear power plant and, in some cases, cables have degraded and required repair or replacement before their qualified end-of-life period. In other cases, cable conditions have been mild and dependable cable performance confirmed to extend well beyond the initial qualified life. Most offline performance-based testing requires cables to be de-coupled and de-energized for specially trained technicians to perform testing. These offline tests constitute an expensive operational burden that limits the economic viability of nuclear power plants. Although initial investment may be higher, new online test practices are emerging as options or complements to offline testing that avoid or minimize the regularly scheduled offline test burden. These online methods include electrical and fiber-optic partial discharge measurement, spread spectrum time or frequency domain reflectometry, distributed temperature profile measurements, and local interdigital capacitance measurement of insulation characteristics. Introduction of these methods must be supported by research to confirm efficacy plus either publicly financed or market driven investment to support the start-up expense of cost-effective instrumentation to monitor cable condition and assure reliable operation. This work summarizes various online cable assessment technologies plus introduces a new cable motor test bed to assess some of these technologies in a controlled test environment.

Glass, Samuel W.↗

Atomic layer deposition of TiN for the fabrication of nanomechanical resonators

Films of titanium nitride were grown by atomic layer deposition (ALD) over a range of temperatures from 120 Degree-Sign C to 300 Degree-Sign C, and their deposition rates were characterized by ellipsometry and reflectometry. The stress state of the films was evaluated by interferometry using a wafer bowing technique and varied from compressive (-18 MPa) to tensile (650 MPa). The crystal structure of the films was assessed by x-ray diffraction. The grain size varied with temperature in the range of 2-9 nm. The chemical composition of the films was ascertained by high-resolution x-ray photoelectron spectroscopy and showed the presence of O, Cl, and C contaminants. A mildly tensile (250 MPa) stressed film was employed for the fabrication (by electron beam lithography and reactive ion etching) of doubly clamped nanoresonator beams. The resonance frequency of resonators was assayed using an interferometric resonance testing apparatus. The devices exhibited sharp mechanical resonance peaks in the 17-25 MHz range. The uniformity and controllable deposition rate of ALD films make them ideal candidate materials for the fabrication of ultranarrow (<50 nm) nanobeam structures.

36 MATERIALS SCIENCE↗

Atmospheric pressure spatial atomic layer deposition web coating with in situ monitoring of film thickness

Spectral reflectometry was implemented as a method for in situ thickness monitoring in a spatial atomic layer deposition (ALD) system. Al{sub 2}O{sub 3} films were grown on a moving polymer web substrate at 100 °C using an atmospheric pressure ALD web coating system, with film growth of 0.11–0.13 nm/cycle. The modular coating head design and the in situ monitoring allowed for the characterization and optimization of the trimethylaluminum and water precursor exposures, purge flows, and web speed. A thickness uniformity of ±2% was achieved across the web. ALD cycle times as low as 76 ms were demonstrated with a web speed of 1 m/s and a vertical gap height of 0.5 mm. This atmospheric pressure ALD system with in situ process control demonstrates the feasibility of low-cost, high throughput roll-to-roll ALD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Picometer sensitivity metrology for EUV absorber phase

With growing interest in EUV attenuated phase-shift masks due to their superior image quality for applications such as dense contact and pillar arrays, it is becoming critical to model, measure, and monitor the intensity and relative phase of multilayer and absorber reflections. We present a solution based on physical modeling of reflectometry data, which can achieve single picometer phase precision and sensitivity to changes in average film thickness below one atomic monolayer. We measure absorber and multilayer reflectivity to determine thin-film parameters with a multidimensional optimization and then acquire a new measurement of either multilayer or absorber to determine perturbations in surface contamination thickness. While it is difficult to assess the accuracy of the first step, the simplicity of the second step allows us to characterize our sensitivity to changes in contamination thickness. Thus, we apply this analysis using an initial set of measurements and repeated measurements after a period of storage. For the multilayer, the total contamination growth was 1068 pm, which occurred almost exclusively during storage (1085 pm) and decreased very slightly during repeated measurements (-17 pm). For the absorber, the behavior was quite different, with a total growth of 126 pm, which occurred much less during storage (28 pm) and primarily during repeated measurements (98 pm). Ultimately, the change in relative phase (absorber minus multilayer) was -0.86 deg for the multilayer and -1.12 deg for the absorber. We estimate the precision of the surface contamination measurement to be 3σ < 6 pm for measuring thickness and 3σ < 0.2 deg for measuring phase.

36 MATERIALS SCIENCE↗

High spatial resolution fiber optical sensors for simultaneous temperature and chemical sensing for energy industries

This paper demonstrates optical fibers as high-temperature sensor platforms. Through engineering and onfiber integration of functional metal oxide sensory materials, we report the development of an integrated sensor solution to perform temperature and chemical measurements for high-temperature energy applications. Using the Rayleigh optical frequency domain reflectometry (OFDR) distributed sensing scheme, the temperature and hydrogen concentration were measured along the fiber. To overcome the weak Rayleighbackscattering intensity exhibited by conventional optical fibers, an ultrafast laser was used to enhance the Rayleigh scattering by a direct laser writing method. Using the Rayleigh-enhanced fiber as sensor platform, both temperature and hydrogen reaction were monitored at high temperature up to 750°C with 4-mm spatial resolution.

Yan, Aidong↗

Hydrodynamic and Membrane Binding Properties of Purified Rous Sarcoma Virus Gag Protein

Previously, no retroviral Gag protein has been highly purified in milligram quantities and in a biologically relevant and active form. We have purified Rous sarcoma virus (RSV) Gag protein and in parallel several truncation mutants of Gag and have studied their biophysical properties and membrane interactions in vitro. RSV Gag is unusual in that it is not naturally myristoylated. From its ability to assemble into virus-like particles in vitro, we infer that RSV Gag is biologically active. By size exclusion chromatography and small-angle X-ray scattering, Gag in solution appears extended and flexible, in contrast to previous reports on unmyristoylated HIV-1 Gag, which is compact. However, by neutron reflectometry measurements of RSV Gag bound to a supported bilayer, the protein appears to adopt a more compact, folded-over conformation. At physiological ionic strength, purified Gag binds strongly to liposomes containing acidic lipids. This interaction is stimulated by physiological levels of phosphatidylinositol-(4,5)-bisphosphate [PI(4,5)P2] and by cholesterol. However, unlike HIV-1 Gag, RSV Gag shows no sensitivity to acyl chain saturation. In contrast with full-length RSV Gag, the purified MA domain of Gag binds to liposomes only weakly. Similarly, both an N-terminally truncated version of Gag that is missing the MA domain and a C-terminally truncated version that is missing the NC domain bind only weakly. These results imply that NC contributes to membrane interaction in vitro, either by directly contacting acidic lipids or by promoting Gag multimerization. Retroviruses like HIV assemble at and bud from the plasma membrane of cells. Assembly requires the interaction between thousands of Gag molecules to form a lattice. Previous work indicated that lattice formation at the plasma membrane is influenced by the conformation of monomeric HIV. We have extended this work to the more tractable RSV Gag. Our results show that RSV Gag is highly flexible and can adopt a folded-over conformation on a lipid bilayer, implicating both the N and C termini in membrane binding. In addition, binding of Gag to membranes is diminished when either terminal domain is truncated. RSV Gag membrane association is significantly less sensitive than HIV Gag membrane association to lipid acyl chain saturation. Lastly, these findings shed light on Gag assembly and membrane binding, critical steps in the viral life cycle and an untapped target for antiretroviral drugs.

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of the ultrasonic wave influence on magnetic ordering in a 20 x [Fe(20 A)/Cr(12 A)]/MgO layered structure

A 20 x [Fe(20 A)/Cr (12 A)]/MgO structure excited by an ultrasonic wave was investigated by polarized neutron reflectometry. It was found that magnetic domains oscillate and their effective size decreases in weak magnetic fields. In close-to-saturation fields, a magnetic lattice is formed in the layered structure; the interplanar spacings in this lattice change with an increase in the field strength and as a result of the excitation of the structure by an ultrasonic wave.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the magnetic contribution to the YFe{sub 2} susceptibility by means of X-ray resonant magnetic reflectivity

The reflectometry curves of an Nb(4 nm)/YFe{sub 2}(40 nm, <110>)/Fe(1.5 nm)/Nb(50 nm) sample measured in the synchrotron radiation of right- and left-handed circular polarization for a set of wavelengths near the Y L{sub 2,3} absorption edges have been used to determine the energy dependences of the component magnitudes for the X-ray susceptibility tensor of YFe{sub 2} near the yttrium absorption edges, including off-diagonal magnetic additives. Our result is in good agreement with the normalized experimental absorption and circular dichroism spectra and their Kramers-Kronig transformations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of the genetic algorithm of jointly fitting different types of X-ray scattering curves

A method for jointly processing X-ray scattering data of different types is developed. It is shown that, by optimizing the genetic algorithm of the joint solution of the inverse problem of X-ray diffractometry and reflectometry, one can reduce the amount of calculations and reliably determine the parameters of layers in the structure under study, even when the information about them is a priori limited.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilayer X-ray mirrors for the (4.4-5)-nm carbon-window spectral region

Cr/C-based multilayer X-ray mirrors intended for the reflection of X-ray radiation in the 'carbon-window' spectral region ({lambda} = 4.4-5 nm) are fabricated and studied. The structures are formed by magnetron sputtering at different deposition parameters. Under normal incidence, record reflection coefficients up to 15% are reached. The structural parameters of the mirrors are investigated by reflectometry at wavelengths of 0.154 and 4.47 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the chemical nature of implanted ions on the structure of a silicon layer damaged by implantation

The influence of the implantation of silicon single crystals by fluorine, nitrogen, oxygen, and neon ions on the distribution of strain and the static Debye-Waller factor in the crystal lattice over the implanted-layer depth has been investigated by high-resolution X-ray diffraction. The density depth distribution in the surface layer of native oxide has been measured by X-ray reflectometry. Room-temperature implantation conditions have ensured the equality of the suggested ranges of ions of different masses and the energies transferred by them to the target. It is convincingly shown that the change in the structural parameters of the radiation-damaged silicon layer and the native oxide layer depend on the chemical activity of the implanted ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗