Results for “production data” — Page 33

DOE OSTI2024

ARM Trajectories Data Set Value-Added Product Report

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s ARM Trajectories Data Set (ARMTRAJ) Value-Added Product (VAP) provides trajectory data sets initialized at ARM deployment coordinates and configured using ARM data sets. The six trajectory data sets support aerosol, cloud, planetary boundary layer, and related research (aerosol-cloud interactions, etc.), as well as studies using ARM Aerial Facility (AAF) and tethered balloon system (TBS) measurements. Trajectory calculations use the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model informed by the European Centre for Medium-Range Weather Forecasts (ECMWF) fifth-generation atmospheric reanalysis (ERA5) data set at its highest spatial resolution (~31 km). HYSPLIT also runs at multiple initial starting locations surrounding ARM deployments (in latitude/longitude and/or vertical coordinates), facilitating an ensemble for each sample in the data sets. The ensemble mean and variability reported in ARMTRAJ improve the fidelity and provide uncertainty estimates of trajectory coordinates, thermodynamic properties, and other output fields.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Dual clumped (Δ47-Δ48) isotope data for amorphous carbonates and transformation products reveal a novel mechanism for disequilibrium clumped isotope effects

Not provided.

Geochemistry & Geophysics↗

DOE OSTI2023

Characterization of D-T Generator Neutron Flux Spectrum for Cyclic Neutron Activation Analysis Experiments

Improving nuclear data for short-lived fission product yields will further our fundamental understanding of fission, which is needed across various scientific fields and applications. One method of attaining the needed product yield data is through cyclic neutron activation, which allows a target to be irradiated in a neutron environment and then transported for counting of the radionuclides produced, typically via g spectroscopy. Recently, such a system has been constructed and commissioned at Pacific Northwest National Laboratory. Targets are shuttled between the head of a D-T neutron generator and a counting station with a transit time of 2 seconds. As part of the characterization of this system, the neutron flux was studied using two activation targets. The neutron flux from the deuterium-tritium fusion generator was determined to be 9.95(33) x10^8 n/cm2-s with a peak energy of 14.9 MeV and a spread of approximately 4 decades between the epithermal and 14 MeV peak group flux.

cyclic neutron activation, gamma-ray spectroscopy,↗

DOE OSTI2021

Machine Learning for a-posteriori model-observed data fusion to enhance predictive value of ESM output

The proposed research is consistent with focal areas 2 and 3: when successful, this effort will enhance the predictive value of Earth System Model (ESM) output by identifying and quantifying its systematic deviations from available observations and by correcting and recalibrating to existing data. The product is a hybrid process & data-driven modeling tool whose estimation can also bring insights through pattern discovery recognition on model deficiencies on the one hand and data gaps on the other.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Short-lived photofission product yields from 238 U and 232 Th at Bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV for nuclear forensics isotope production applications

The existing photofission product yield data sets are often based on nuclear models, and limited experimental measurements of these fission product yields have been performed. These experiments resulted in measured cumulative fission product yields (CFPYs) for 238 U and 232 Th for the bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV. The half-lives of the reported fission products range from 1.07–40.8 s. This work is motivated by a demonstrated need for novel isotope production methods for nuclear forensics and improved nuclear data to support the nonproliferation community. A high-purity germanium detector and a pneumatic transfer system were employed for measurements of short-lived fission products, collecting data between cycles of accelerator irradiation and measurement.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2023

Fusion of Multiple Models for Improving Gross Primary Production Estimation With Eddy Covariance Data Based on Machine Learning

Abstract Terrestrial gross primary production (GPP) represents the magnitude of CO 2 uptake through vegetation photosynthesis, and is a key variable for carbon cycles between the biosphere and atmosphere. Light use efficiency (LUE) models have been widely used to estimate GPP for its physiological mechanisms and availability of data acquisition and implementation, yet each individual GPP model has exhibited large uncertainties due to input errors and model structure, and further studies of systematic validation, comparison, and fusion of those models with eddy covariance (EC) site data across diverse ecosystem types are still needed in order to further improve GPP estimation. We here compared and fused five GPP models (VPM, EC‐LUE, GOL‐PEM, CHJ, and C‐Fix) across eight ecosystems based on FLUXNET2015 data set using the ensemble methods of Bayesian Model Averaging (BMA), Support Vector Machine (SVM), and Random Forest (RF) separately. Our results showed that for individual models, EC‐LUE gave a better performance to capture interannual variability of GPP than other models, followed by VPM and GLO‐PEM, while CHJ and C‐Fix were more limited in their estimation performance. We found RF and SVM were superior to BMA on merging individual models at various plant functional types (PFTs) and at the scale of individual sites. On the basis of individual models, the fusion methods of BMA, SVM, and RF were examined by a five‐fold cross validation for each ecosystem type, and each method successfully improved the average accuracy of estimation by 8%, 18%, and 19%, respectively.

Environmental Sciences & Ecology↗

DOE OSTI2026

Soil viral production count, respiration, and amplicon data

This study aimed to quantify rates of viral production in aridisol soil under conditions as close to natural field soil as possible given the perturbations necessary to manipulate viral abundances. Viruses were removed from soil, then added back to virus-depleted soil to control the initial viral abundances at either 100% (field_abund) or 10% (reduced_abund) of measured field viral abundance to generate treatments with field-relevant and reduced viral infection pressure, respectively. Replicates of batch incubation jars were harvested every 8 hours for 48 hours to enumerate bacteria and viruses by microscopy (n=5) and profile bacterial community composition by 16S rRNA amplicon sequencing (n=3).

Zimmerman, Amy [Pacific Northwest National Laborat↗

DOE OSTI2022

Tracking Volumetric Units in Modular Factories for Automated Progress Monitoring Using Computer Vision

The construction industry is increasingly adopting off-site and prefabricated methods due to advantages offered in safety, quality, and lead time. Applying industrialized methods for plant management in offsite construction factories requires the collection of large volumes of production process data, which is a tedious task when performed manually. Recent attempts to automate this process have relied on sensor-based data collection methods which are susceptible to noise, expensive, and difficult to validate. Computer vision methods, however, enable process data collection from videos without the limitations of the other sensor-based methods. This technology has not been applied for offsite construction except in very few instances and therefore, this study proposes a novel method to reliably collect the production process data using computer vision method in near real-time from widely used surveillance cameras in offsite construction. The proposed method allows the user to annotate the workstations of interest on the video as ground truths and process these areas throughout the entire video to track the units entering and leaving stations, while continuously updating a near real-time schedule of the production line. This framework was validated by implementing on the surveillance videos of the production process of modular home manufacturing in a factory. The results consistently provided 100% accuracy, after denoising, for all the videos processed including 60 h of work for a station. The developed method enables real-time tracking of station performance, which can enable continuous improvement methods for factory management and resource allocation.

computer vision↗

DOE OSTI2021

MATAR: A performance portability and productivity implementation of data-oriented design with Kokkos

There is a need for simple, fast, and memory-efficient multidimensional data structures for dense and sparse storage that arise with numerical methods and in software applications. The data structures must perform equally well across multiple computer architectures, including CPUs and GPUs. For this purpose, we developed MATAR, a C++ software library that allows for simple creation and use of intricate data structures that is also portable across disparate architectures using Kokkos. Here, the performance aspect is achieved by forcing contiguous memory layout (or as close to contiguous as possible) for multidimensional and multi-size dense or sparse MATrix and ARray (hence, MATAR) types. Our results show that MATAR has the capability to improve memory utilization, performance, and programmer productivity in scientific computing. This is achieved by fitting more work into the available memory, minimizing memory loads required, and by loading memory in the most efficient order. This document describes the purpose of the work, the implementation of each of the data types, and the resulting performance both in some simple baseline test cases and in an application code.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

ARM Data for Examining the Ice-Nucleating Particles from SGP Part II (ExINP-SGP II) Gas Adsorption Analyzer

Knowledge of airborne particulate matter (PM), especially the particles that have supermicron diameters, is key for understanding ice-nucleating particles (INPs). Supported by the Atmospheric Radiation Measurement (ARM) user facility, we sampled PM and surface soil materials at the Southern Great Plains observatory (SGP; 36° 36′ 18″ N, 97° 29′ 6″ W) to systematically compare the INP abundance and ice nucleation efficiency of different SGP samples (i.e., airborne versus surface materials). The field campaign, named Examing INP from SGP II (ExINP-SGP II), was conducted from 20 January to 20 April, 2021. Our data analysis products include (1) physical surface sorption characterization data (i.e., BET, pore volume) of two sets of samples -- SGP Soil and USDA, (2) X-ray diffraction spectra for the same two samples, (3) immersion freezing assay-based ice nucleation active mass density data as a function of freezing temperature for both ambient and surface samples, and (4) time-series data of ambient meteorological conditions, concentration particle counter-derived aerosol particle concentration, and aerosol particle sizer measurement during ExINP-SGP II.

3Flex,BET specific surface area and pore volume, A↗

DOE OSTI2021

ARM Data for Examining the Ice-Nucleating Particles from SGP Part II (ExINP-SGP II) X-Ray Diffraction

Knowledge of airborne particulate matter (PM), especially the particles that have supermicron diameters, is key for understanding ice-nucleating particles (INPs). Supported by the Atmospheric Radiation Measurement (ARM) user facility, we sampled PM and surface soil materials at the Southern Great Plains observatory (SGP; 36° 36′ 18″ N, 97° 29′ 6″ W) to systematically compare the INP abundance and ice nucleation efficiency of different SGP samples (i.e., airborne versus surface materials). The field campaign, named Examing INP from SGP II (ExINP-SGP II), was conducted from 20 January to 20 April, 2021. Our data analysis products include (1) physical surface sorption characterization data (i.e., BET, pore volume) of two sets of samples -- SGP Soil and USDA, (2) X-ray diffraction spectra for the same two samples, (3) immersion freezing assay-based ice nucleation active mass density data as a function of freezing temperature for both ambient and surface samples, and (4) time-series data of ambient meteorological conditions, concentration particle counter-derived aerosol particle concentration, and aerosol particle sizer measurement during ExINP-SGP II.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

ARM Data for Examining the Ice-Nucleating Particles from SGP Part II (ExINP-SGP II) Cryogenic Refrigerator Applied to Freezing Test

Knowledge of airborne particulate matter (PM), especially the particles that have supermicron diameters, is key for understanding ice-nucleating particles (INPs). Supported by the Atmospheric Radiation Measurement (ARM) user facility, we sampled PM and surface soil materials at the Southern Great Plains observatory (SGP; 36° 36′ 18″ N, 97° 29′ 6″ W) to systematically compare the INP abundance and ice nucleation efficiency of different SGP samples (i.e., airborne versus surface materials). The field campaign, named Examing INP from SGP II (ExINP-SGP II), was conducted from 20 January to 20 April, 2021. Our data analysis products include (1) physical surface sorption characterization data (i.e., BET, pore volume) of two sets of samples -- SGP Soil and USDA, (2) X-ray diffraction spectra for the same two samples, (3) immersion freezing assay-based ice nucleation active mass density data as a function of freezing temperature for both ambient and surface samples, and (4) time-series data of ambient meteorological conditions, concentration particle counter-derived aerosol particle concentration, and aerosol particle sizer measurement during ExINP-SGP II.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

ARM Data for Examining the Ice-Nucleating Particles from SGP Part II (ExINP-SGP II) Aerodynamic Particle Sizer, Condensation Particle Counter, and Meteorological Instrument Data Analysis

Knowledge of airborne particulate matter (PM), especially the particles that have supermicron diameters, is key for understanding ice-nucleating particles (INPs). Supported by the Atmospheric Radiation Measurement (ARM) user facility, we sampled PM and surface soil materials at the Southern Great Plains observatory (SGP; 36° 36′ 18″ N, 97° 29′ 6″ W) to systematically compare the INP abundance and ice nucleation efficiency of different SGP samples (i.e., airborne versus surface materials). The field campaign, named Examing INP from SGP II (ExINP-SGP II), was conducted from 20 January to 20 April, 2021. Our data analysis products include (1) physical surface sorption characterization data (i.e., BET, pore volume) of two sets of samples -- SGP Soil and USDA, (2) X-ray diffraction spectra for the same two samples, (3) immersion freezing assay-based ice nucleation active mass density data as a function of freezing temperature for both ambient and surface samples, and (4) time-series data of ambient meteorological conditions, concentration particle counter-derived aerosol particle concentration, and aerosol particle sizer measurement during ExINP-SGP II.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Radial Deconsolidation and Leach-Burn-Leach of AGR-3/4 Compacts 8-4 and 7-4

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program’s third and fourth irradiation experiments (AGR-3/4), originally planned as separate tests, were combined into one test train for irradiation in the Advanced Test Reactor at Idaho National Laboratory (INL). The irradiation test began on December 14, 2011, and ended on April 12, 2014 (Collin 2016). The originally planned AGR-3 and AGR-4 irradiation experiments were both to be focused on obtaining fission product transport data to support improvements in modeling. The AGR-3 experimental plan was focused on gaseous and metallic fission product release from the kernels and diffusion in the coatings during irradiation and postirradiation safety testing. The AGR-4 experimental plan was focused on diffusivities and sorptivities in the compact matrix and reactor graphite (Petti et al. 2005). These goals were combined in the AGR-3/4 irradiation experiment, which consisted of twelve independently monitored capsules that each contained four AGR-3/4 compacts in a single stack surrounded by an inner ring of matrix or graphite and an outer ring of graphite. There were two capsule types: a standard capsule and a fuel body, in which the outer graphite ring included a floor and cap to fully enclose the fuel (Stempien et al. 2018a). The fuel body design supported post-irradiation safety testing of the intact fuel and ring assembly to obtain data on fission product transport and release from matrix and graphite at accident temperatures (Demkowicz 2017).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Development of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) Value-Added Product Based on the lagtraj Framework

The Atmospheric Radiation Measurement (ARM) large-scale forcing data developed based on the constrained variational analysis (VARANAL) value-added product (VAP) (Zhang and Lin 1997, Zhang et al. 2001, Xie et al. 2004, Tang et al. 2019) has been widely used for single-column models (SCMs), cloud-resolving models (CRMs), and large-eddy simulation models (LESs) to understand and improve physical processes in models. Recently, the U.S. Department of Energy (DOE) ARM user facility conducted several major field campaigns using ship-based moving observational platforms. For example, the Marine ARM GPCI Investigation of Clouds (MAGIC) field campaign focused on the role of subtropical marine-boundary layer (MBL) clouds, and the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign aimed to improve understanding of the coupled climate systems in the Arctic. Observations from moving platforms are critical to provide a comprehensive characterization of coupled-system processes associated with all stages of the cloud and/or sea-ice life cycle. Traditional ARM large-scale forcing data have been developed at fixed locations. They need to be extended to include these moving platforms to address data needs for ship-based field campaigns or to support LES modeling in a Lagrangian framework. With these considerations in mind, we develop ARM-type Lagrangian large-scale forcing data sets based on the lagtraj framework (Boeing et al. 2020) with notable enhancements in generating forcings that are more suitable for ARM field campaigns. The lagtraj is a novel tool that generates forcings for LES and SCM simulation in both Lagrangian and Eulerian perspective. This technical report focuses on the major changes we performed on the lagtraj algorithm and provides an overview of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) value-added products.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Assessment of Data-Management Infrastructure Needs for Production Use of Advanced Machine Learning and Artificial Intelligence: Tri-Lab Level II Milestone (8554)

A robust data-management infrastructure is a key enabler for National Security Enterprise (NSE) capabilities in artificial intelligence and machine learning. This document describes efforts from a team of researchers at Sandia National Laboratories, Los Alamos National Laboratory, and Livermore National Laboratory to complete ASC Level II milestone #8854 “Assessment of Data-Management Infrastructure Needs for Production use of Advanced Machine learning and Artificial Intelligence.”

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Gluon saturation effects in exclusive heavy vector meson photoproduction

We study exclusive J/ψ and ϒ photoproduction for proton and Pb targets in the high-energy limit, with the energy dependence computed using the linear Balitsky–Fadin–Kuraev–Lipatov and the nonlinear Balitsky–Kovchegov evolution equations. The difference between these two evolution equations can be directly attributed to gluon saturation physics. We find that for proton targets there is no difference between the two approaches at the energies of the currently available data, while for Pb targets in J/ψ production the data shows a clear preference for the evolution with gluon saturation.

UPC↗

DOE OSTI2025

Predicting weather impacts on corn production in a data-limited region using a transfer learning approach

The stability of food supply and prices may depend more on annual changes in yields from year-to-year variability in weather than on longer-term average changes from changing climatic conditions. However, the absence of high-quality data on crop yields at fine spatial resolutions in many regions of the world makes it challenging to statistically model their response to interannual variability in weather patterns. Therefore, there is a need for empirical methods that can project annual crop yield changes even in limited data regions. Here, we propose a transfer learning algorithm that uses high spatial resolution data from one region to project yields in another region with more limited data. The goal of our work is to understand what data types can be beneficial for transferring learning from a source region to a very different target region with more limited data. We utilize Long Short-Term Memory to develop a transfer learning model that is trained on historical county-level corn yield in the United States and predicts district-level corn yield variations in India. Even using smaller amounts of data in India, simulating a data-scarce region, we achieve an average root mean square error of 0.48 bu acre−1 in predicting interannual yield variations. Using Shapley values to interpret results, we explore the contribution of the different weather parameters to interannual yield variability and find a larger influence of precipitation-related variables. Our study demonstrates the usefulness of this method for transferring models of weather impacts on crop yields trained on a data-rich country to one with more limited data. It suggests the potential of applying the transfer learning model to mitigate the need for extensive raw data globally.

Vishwakarma, Srishti [ORNL] (ORCID:000000031674419↗