Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “precision measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Preparation of 241 Am/ 243 Am gravimetric mixtures and development of Am isotopic and assay measurement techniques using thermal ionization mass spectrometry

Three gravimetric mixtures with 241 Am/ 243 Am isotope ratios at nominally 1:1, 20:1, and 200:1 were prepared for calibration of the thermal ionization mass spectrometer instruments used for americium isotopic and assay measurements by isotope dilution mass spectrometry. The total evaporation analytical technique was developed for high-accuracy and precision measurements of Am isotopic ratios. The technique was also applied to Am assay measurements using isotope dilution mass spectrometry. The Am isotope ratio and assay measurement techniques were utilized to characterize batches of americium oxide separated from plutonium materials in storage at Los Alamos National Laboratory in support of commercial use of 241 AmO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intrinsic and extrinsic effects on the fracture toughness of ductile metallic glasses

The potential application of metallic glasses (MGs) as structural materials demands accurate measurements of their toughness and the understanding of the underlying factors affecting it. Currently, it is challenging to precisely measure the toughness of MGs, especially ductile MGs. Measured toughness values are widely scattered, even for MGs with identical compositions. That is attributed to the combined effect of intrinsic and extrinsic factors including processing, sample geometries, and loading conditions. A fundamental understanding of the influences of these elements is thus of great significance. In the present study, molecular dynamics simulations are performed to investigate the influence of intrinsic and extrinsic effects on the fracture toughness of CuZr MGs. In particular, focused is placed on the effects of cooling rate, notch shape and size, strain rate, and temperature. The results indicate that the fracture toughness of a MG scales with the cooling rate used to prepare it. This is attributed to increased free volume content generated at high cooling rates, which enhances plastic deformation and amplifies the associated energy dissipation during plastic deformation events. Fracture toughness also increases with the strain rate, arguably due to strain rate-induced crack extension delay. Overall, the results demonstrate that the largest fracture toughness are achieved when MG samples are fabricated at high cooling rates and subjected to high strain rate deformation. In addition, results suggest that the fracture toughness decreases with increasing temperature, due to the significant decrease in strength. Here, the correlations revealed between these crucial intrinsic and extrinsic parameters and the calculated MG fracture toughness support the development of a framework to understand the root of the discrepancies in the measurement of the toughness of MGs and provide insights into the design of tough MGs for structural applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Zero-deadtime processing in beta spectroscopy for measurement of the non-zero neutrino mass

The Project 8 collaboration seeks to measure, or more tightly bound, the mass of the electron antineutrino by applying a novel spectroscopy technique to precisely measure the tritium beta-decay spectrum. The current system produces a single analog signal, which is digitized and processed in several stages before being saved to local disk storage. Online processing includes two stages, an FPGA connected to the analog to digital converter reduces the data down to the region of interest before shipping over the local network for further processing and storage. A normal CPU-based processing stage applies triggering logic to only save data at times when a signal is present, further reducing the total volume of data which needs to be written to disk or transferred for long-term storage. The next stage of the project will need to process many input channels and will integrate a necessary aggregation and combination step prior to applying the event search and triggering logic. We present the online processing system which has successfully been deployed for the current, singlechannel, phase. We also present the status and design for a many-channel platform.

Project 8 Collaboration↗
DOE OSTI2024

First Simultaneous Measurement of Differential Muon-Neutrino Charged-Current Cross Sections on Argon for Final States with and without Protons Using MicroBooNE Data

We report the first double-differential neutrino-argon cross section measurement made simultaneously for final states with and without protons for the inclusive muon neutrino charged-current interaction channel. The proton kinematics of this channel are further explored with a differential cross section measurement as a function of the leading proton’s kinetic energy that extends across the detection threshold. These measurements use data collected with the MicroBooNE detector from 6.4 × 10 20 protons on target from the Fermilab booster neutrino beam with a mean neutrino energy of ∼ 0.8 GeV . Extensive data-driven model validation utilizing the conditional constraint formalism is employed. This motivates enlarging the uncertainties with an empirical reweighting approach to minimize the possibility of extracting biased cross section results. The extracted nominal flux-averaged cross sections are compared to widely used event generator predictions revealing severe mismodeling of final states without protons for muon neutrino charged-current interactions, possibly from insufficient treatment of final state interactions. These measurements provide a wealth of new information useful for improving event generators which will enhance the sensitivity of precision measurements in neutrino experiments. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

The JLab Eta Factory (JEF) experiment

The new experiment, JLab Eta Factory (JEF), in the experimental Hall D at Jefferson Lab will extend the physics potential of the GlueX detector beyond the main spectroscopy program and perform precision measurements of various ?(?)decays with emphasis on rare neutral modes. The physics program of the experiment spans from precision tests of low-energy QCD to search of gauge bosons in the mass range below 1 GeV coupling the SM sector to the dark sector. Photoproduction of highly boosted ?(?)mesons using a tagged photon beam, good detection of recoil proton and multi-photon final states will allow to suppress background and collect high-statistics data sample of ?mesons. All these provide many advantages over other ?(?)experiments. The JEF experiment requires to upgrade the inner part of the forward lead glass calorimeter of the GlueX detector with high-granularity, high-resolution lead tungstate PbWO4 scintillating crystals. The calorimeter insert is currently under construction at Jeffeson Lab. The detector will be ready to take data in 2024. An overview of the JEF project will be presented.

Somov, Alexander↗
DOE OSTI2020

A Fast, Two-dimensional Gaussian Process Method Based on Celerite: Applications to Transiting Exoplanet Discovery and Characterization

Gaussian processes (GPs) are commonly used as a model of stochastic variability in astrophysical time series. In particular, GPs are frequently employed to account for correlated stellar variability in planetary transit light curves. The efficient application of GPs to light curves containing thousands to tens of thousands of data points has been made possible by recent advances in GP methods, including the celerite method. Here we present an extension of the celerite method to two input dimensions where, typically, the second dimension is small. This method scales linearly with the total number of data points when the noise in each large dimension is proportional to the same celerite kernel and only the amplitude of the correlated noise varies in the second dimension. We demonstrate the application of this method to the problem of measuring precise transit parameters from multiwavelength light curves and show that it has the potential to improve transit parameters measurements by orders of magnitude. Applications of this method include transit spectroscopy and exomoon detection, as well a broader set of astronomical problems.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1982

Determining spacecraft angular position with Delta VLBI - The Voyager demonstration

A demonstration of a new VLBI-based radio metric data type for interplanetary navigation has been conducted using the Voyager spacecraft on their approach to Saturn. Pseudo-range measurements from stations on intercontinental baselines were employed, in conjunction with interferometric observations of quasars, to obtain a precise measure of the spacecraft angular position. In addition to its high accuracy this technique requires significantly less station time than conventional range and Doppler and can be used in a downlink only mode. The paper describes the data type, acquisition system, and processing procedures. Anticipated measurement accuracy is established by analysis of various system error sources. Results obtained from Voyager observations are given to show that the system performance is in accordance with expectations.

Border, J. S.↗
NASA NTRS1937

The Measurement of Air Speed in Airplanes

Various methods of measuring the air speed of airplanes are described. Particular emphasis is placed on the procedure required to obtain precise measurements of speed by the use of the suspended Pitot-static head or the suspended static head. Typical calibration curves for service installations of Pitot-static heads are shown and the relation between errors in air speed and corresponding errors in observed altitude for such installations is discussed. There is included a brief discussion of various speed-course methods of measuring speed.

Thompson, F L↗
DOE OSTI2023

Surface oxygen exchange kinetics of mixed conducting oxides: Dilatometric vs electrical conductivity relaxation study

The surface oxygen exchange kinetics of mixed ionic-electronic conducting (MIEC) oxides play a crucial role in a variety of applications, including solid oxide fuel/electrolysis cells (SOFCs/SOECs), permeation membranes and sensors. To date, a variety of methods, including isotope exchange, electrical conductivity, optical absorptivity and thermogravimetry relaxation, and impedance spectroscopy have been used to measure the oxygen exchange coefficient of MIEC oxides. Each of these methods have their advantages and limitations, depending on the physical and chemical properties of the investigated materials and their sample dimensions and densities. Here, we demonstrate the ability to precisely measure the surface oxygen exchange coefficient (k chem ) of MIEC model material Pr 0.1 Ce 0.9 O 2-δ (PCO) by use of dilatometric relaxation measurements, particularly of interest for materials that exhibit larger chemical expansion coefficients. This is achieved by use of porous bulk specimens to ensure that the contribution of oxygen exchange to the overall kinetics is dominant. We demonstrate that k chem values extracted from chemical expansion relaxation measurements on PCO are nearly identical to those derived from electrical conductivity relaxation measurements. As a result, this provides the opportunity to precisely investigate the oxygen exchange and chemical expansion kinetics of a wide range of materials used in high-temperature applications, particularly where more conventional methods are difficult or inappropriate to apply.

(Pr,Ce)O2-x↗
DOE OSTI2026

New directions for joint neutrino oscillation measurements with T2K and NOvA

The first joint analysis of data from the NOvA and T2K neutrino oscillations experiments was published in 2025, offering the most precise measurements of the larger mass splitting $\Delta m_{32}^{2}$, the largest mixing angle $\theta_{23}$, and the CP-violating phase $\delta_{CP}$ available at the time. In addition to working towards a reanalysis with additional data collected since that analysis, the collaborations are now exploring possible constraints on BSM physics scenarios. This poster will discuss the potential of a joint measurement of parameters in a framework treating effective non-standard neutral-current neutrino-matter interactions, NC-NSI. Uniquely, the differing baselines and energies of T2K and NOvA allow strong constraints to be set on the electron-muon and electron-tau parameters of NSI contributions to the Hamiltonian, while at the same time maintaining good sensitivity to the standard 3-flavor neutrino oscillations parameters, including the CP phase.

Mikola, Veera [Glasgow U.]↗
NASA NTRS1990

Lidar measurements of stratospheric ozone and intercomparisons and validation

A ground-based, high power differential absorption lidar (DIAL) system has been implemented to make long term, precise measurements or stratospheric ozone concentration profiles from about 20- to 50-km altitude. This lidar is located at an elevation of 2300 m in the San Gabriel Mountains, Southern California, and has been in operation since January 1988. Evaluation of the results obtained from this system has been provided through an intercomparison campaign, carried out during October/November 1988, and through long term comparison with SAGE II satellite measurements. This paper describes the implementation of the system and its operation, including the procedures for data analysis. Examples of ozone profiles measured, and intercomparisons with measurements made by other instruments, are presented; they show that the lidar is capable of producing high quality ozone measurements up to at least 45-km altitude.

Mcdermid, I. Stuart↗
DOE OSTI2020

Unveiling the strong interaction among hadrons at the LHC

One of the key challenges for nuclear physics today is to understand from first principles the effective interaction between hadrons with different quark content. First successes have been achieved using techniques that solve the dynamics of quarks and gluons on discrete space-time lattices. Experimentally, the dynamics of the strong interaction have been studied by scattering hadrons off each other. Such scattering experiments are difficult or impossible for unstable hadrons and so high-quality measurements exist only for hadrons containing up and down quarks. Here we demonstrate that measuring correlations in the momentum space between hadron pairs produced in ultrarelativistic proton–proton collisions at the CERN Large Hadron Collider (LHC) provides a precise method with which to obtain the missing information on the interaction dynamics between any pair of unstable hadrons. Specifically, we discuss the case of the interaction of baryons containing strange quarks (hyperons). We demonstrate how, using precision measurements of proton–omega baryon correlations, the effect of the strong interaction for this hadron–hadron pair can be studied with precision similar to, and compared with, predictions from lattice calculations. The large number of hyperons identified in proton–proton collisions at the LHC, together with accurate modelling of the small (approximately one femtometre) inter-particle distance and exact predictions for the correlation functions, enables a detailed determination of the short-range part of the nucleon-hyperon interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Measurements of Higgs boson production cross sections and couplings in the diphoton decay channel at $ \sqrt{\mathrm{s}} $ = 13 TeV

Measurements of Higgs boson production cross sections and couplings in events where the Higgs boson decays into a pair of photons are reported. Events are selected from a sample of proton-proton collisions at s√ = 13 TeV collected by the CMS detector at the LHC from 2016 to 2018, corresponding to an integrated luminosity of 137 fb -1 . Analysis categories enriched in Higgs boson events produced via gluon fusion, vector boson fusion, vector boson associated production, and production associated with top quarks are constructed. The total Higgs boson signal strength, relative to the standard model (SM) prediction, is measured to be 1.12±0.09. Other properties of the Higgs boson are measured, including SM signal strength modifiers, production cross sections, and its couplings to other particles. These include the most precise measurements of gluon fusion and vector boson fusion Higgs boson production in several different kinematic regions, the first measurement of Higgs boson production in association with a top quark pair in five regions of the Higgs boson transverse momentum, and an upper limit on the rate of Higgs boson production in association with a single top quark. All results are found to be in agreement with the SM expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Super-resolution surface slope metrology of x-ray mirrors

We present experimental, analytical, and numerical methods developed for reconstruction (deconvolution) of one-dimensional (1D) surface slope profiles over the spatial frequency range where the raw data are significantly perturbed due to the limited resolution of the measurement instrument. We characterize the spatial resolution properties of a profiler with the instrument's transfer function (ITF). To precisely measure the ITF, we apply a recently developed method utilizing test surfaces with 1D linear chirped height profiles of constant slope amplitude. Based on the results of the ITF calibration, we determine parameters of an analytical model for the ITF that is used in the original reconstruction software. Here, we treat surface slope metrology data obtained with the Optical Surface Measuring System (OSMS), using as a sensor an electronic autocollimator (AC) ELCOMAT-3000. The spatial resolution of the OSMS is limited by the size of the AC light-beam-collimating aperture. For the purposes of this investigation, the OSMS is equipped with a circular aperture with a diameter of 2.5 mm. This is a typical arrangement of most AC-based slope profilers developed for surface slope metrology of state-of-the-art x-ray mirrors. Using the example of surface slope metrology of two state-of-the-art elliptically shaped x-ray focusing mirrors, we demonstrate that the developed data reconstruction procedure allows us to significantly improve the accuracy of surface slope metrology with the OSMS over the spatial wavelength range from ~1.6 mm to 7 mm. Thus, the amplitude of the quasi-periodic error characteristic of the deterministic polishing process used appears to be higher by a factor of~2 than is apparent from the rough metrology data. Underestimation of the surface slope errors in this spatial wavelength range can lead to serious errors in the expected performance of x-ray mirrors in synchrotron beamlines, especially at modern light sources utilizing coherent x rays, where the perturbations can lead to increased speckle-like intensity variation.

47 OTHER INSTRUMENTATION↗
NASA NTRS1985

Atmospheric concentrations and behavior of halocarbons and methane

The atmospheric concentrations of halocarbons and methane in the troposphere and stratosphere were precisely measured by grab-sampling followed by gas-chromatographic analysis in the laboratory. Chlorofluorocarbons such as CCl2F2 and CCl3F have received a great deal of attention due to their probable impact on the stratospheric ozone: the chlorofluorocarbons accumulated in the troposphere are eventually decomposed by photolysis in the stratosphere releasing Cl radicals which in turn participate in the ClO sub x-catalytic chain destroying the ozone, especially in the upper stratosphere. Methane reacts with Cl in the stratosphere reducing the ozone depletion, while its source and future trend of concentration in the troposphere are uncertain. The study of their distribution and behavior in the atmosphere are therefore very important. After the extensive survey of the locations for collection of atmospheriic samples representing the midlatitudes Northern Hemisphere (N.H.) without local contamination, we have measured the concentrations of CCl2F2, CCl3F, CH3CCl3, CC1, CHCl=CCl2 and CCl2=CCl2 with plus or minus 1 pptv precision in samples collected in Hokkaido and west coast Tohoku area (the northern part of Japan, 40 deg to 45 deg N) every summer and winter since 1979. The observed concentrations of CCl2F2 and CCl3F are now above 360 and 200 pptv, respectively, and have been steadily increasing by approx. 15 and approx. 8 pptv/year during the last several years.

Makide, Y.↗
NASA NTRS1995

Very long baseline IPS observations of the solar wind speed in the fast polar streams

Observations of intensity scintillation (IPS) with two or more spaced antennas have been widely used to measure the solar wind velocity. Such methods are particularly valuable in regions which spacecraft have not yet penetrated, but they are also very useful in improving the spatial temporal sampling of the solar wind, even in regions where spacecraft data are available. The principle of the measurement is to measure the time delay tau(sub d) between the scintillations observed with an antenna baseline b. The velocity estimate is just V = b/tau(sub d). The error in estimation of the time delay delta tau(sub d) is independent of the baseline length, thus the error in the velocity estimate delta V given by delta(V)/V approximately equals to (delta tau(sub d))/tau(sub d) is inversely proportional to tau(sub d) and hence to b. However the use of a long baseline b has a less obvious advantage; it provides a means for separating fast and slow contributions when both are present in the scattering region. Here we will present recent observations made using the large cylinder antenna at Ooty in the Nilgiri Hills of South India, and one of the 45 m dishes of GMRT near Pune in West-Central India. The baseline of 900 km is, by a considerable margin, the longest ever used for IPS and provides excellent velocity resolution. These results compared with the ULYSSES observations and other IPS measurements made closer to the sun with higher frequency instruments such as EISCAT and the VLBA will provide a precise measure of the velocity profile of the fast north-polar stream.

Rao, A. Pramesh↗
NASA NTRS2002

Status and Progress on the Upgraded Infrared Spatial Interferometer

The U.C. Berkeley Infrared Spatial Interferometer is a two telescope stellar interferometer operating in the 9-12 micron atmospheric window, utilizing heterodyne detection with CO2 laser local oscillators. Science with the ISI has been focused on the measurements of the spatial distribution of dust and molecules around mass-losing late type stars, and more recently precision measurements of stellar diameters in the mid-infrared avoiding molecular lines. Also during the past few years, a NSF sponsored program of expansion from two to three telescopes has been underway. This expansion will allow the ISI to make visibility observations on three simultaneous baselines and a measure a closure phase. The third telescope was completed last year and shipped to Mt. Wilson, and more recently a Central Control Facility and Master Laser Oscillator Facility were also completed and recently shipped to Mt. Wilson. In this talk we report progress on this program and highlight some of the most recent astrophysical results.

Danchi, W. C.↗