Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polyurethane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Minimized aging of isocyanurate-based rigid cellular foams for buildings through tailored barrier facers and optimized formulation

The thermal resistivity (h·ft 2 ·°F/Btu/in.) of closed-cell rigid foam insulation materials significantly decreases over time. Diffusion-tight facers are designed to significantly enhance initial thermal resistivity and long-term thermal performance by preventing gas diffusion into the foam cells and inhibiting the escape of low thermal conductivity blowing agents. In addition to the gas diffusion property of the facer film, adhesion between the foam and the facer is crucial for achieving diffusion-tight bonding. Here, this study addresses the challenge of thermal aging by investigating how facer film properties and foam formulation influence the durability of thermal performance. A systematic evaluation was conducted to understand the effects of polymeric barrier films, surface treatments, facer coverage, and foam matrix rigidity on thermal resistivity over time. Key findings reveal that diffusion-tight facers, particularly those with metallized layers and compatible heat seal layers, significantly reduce gas exchange and improve foam-facer adhesion. The optimized system, incorporating barrier facers and a tailored polyisocyanurate foam formulation, achieved initial and aged thermal resistivity values after 200 days of approximately 8.3 and 7.4 h ft 2 ·°F/Btu/in., respectively representing only a 10 % reduction compared to a 17 % reduction observed in control samples without facers. Notably, polyurethane spray foams with facers exhibited only a 4 % reduction in thermal resistivity, compared to a 23 % decrease in control samples, demonstrating nearly six times better retention of thermal performance. This innovative facer technology presents a promising solution for reducing energy costs and represents a significant advancement in optimizing energy management for building envelopes in future technologies. This technology can also be adapted for other applications that necessitate the preservation of long-term thermal performance.

Wanasinghe, Shiwanka Vidarshi [Oak Ridge National ↗
DOE OSTI2025

Property optimized energy absorber for automotive bumpers utilizing multi-material and structural design strategies

This study proposes a novel design for automotive bumper using optimized lattice structures and multi-materials to balance low-speed collision and high-speed pedestrian impact performance. Different blends of 20 % carbon fiber-reinforced acrylonitrile butadiene styrene with thermoplastic polyurethane were used to tailor material properties. The energy absorber features lattice structures with customized mechanical responses, created by varying the incline angle θ from 0 to 180°. We conducted 576 finite element simulations on a half-scale model to optimize energy absorption and stiffness, leading to 66 optimized designs that met both low-speed and high-speed impact criteria. Two sub-scale optimized energy absorbers with different peak forces—both meeting low-speed impact requirements—were 3D printed and validated through drop-weight testing. The one with lower peak stress demonstrated a more compliant response, exhibiting approximately 90 % lower initial peak force and an increase in energy absorption of around 33 % (from 24 J to 32 J). Compared to the baseline triangular lattice, the optimized absorber increased energy absorption by 68 % from (19 J to 32 J) and reduced peak stress by 70 %. It also showed near-complete recovery with minimal fractures, making it suitable for repeated use. This design improves safety while offering a lightweight, durable, and cost-effective bumper system.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Characterization of CO 2 flux through hollow-fiber membranes using pH modeling

CO 2 must be delivered efficiently during large-scale microalgal cultivation. Bubbleless mass-transfer via diffusion through hollow-fiber membranes (HFM) can achieve much higher CO 2 -transfer efficiency than traditional sparging systems. Here this study developed and used a model to compute accurate values for the CO 2 flux (J CO 2 ), overall mass-transfer coefficient (K L ), and overall volumetric mass-transfer coefficient (K L a) based on the rate of change of pH in batch experiments. A composite HFM comprised of two macroporous polyethylene layers and a nonporous polyurethane layer was tested for CO 2 transfer to a sodium carbonate solution using a range of total pressures, inlet CO 2 concentrations, and open-end versus closed-end modes of operation. The model accurately computed J CO2 and K L a for pH values above 8. Key trends are that (i) JCO2 and KLa increased with increasing average inlet CO 2 partial pressure; (ii) open-end HFMs performed better than closed-end HFMs when the supplied CO 2 was less than 100%; and (iii) the available membrane area used for CO 2 mass-transfer decreased as the inlet CO 2 partial pressure decreased due to depletion of CO 2 inside the membrane, especially for closed-end HFMs, since inert gases could not be vented.

42 ENGINEERING↗
DOE OSTI2021

Anisotropy evolution of elastomeric foams during uniaxial compression measured via in-situ X-ray computed tomography

We have characterized the three-dimensional evolution of microstructural anisotropy of a family of elastomeric foams during uniaxial compression via in-situ X-ray computed tomography. Flexible polyurethane foam specimens with densities of 136, 160 and 240 kg/m 3 were compressed in uniaxial stress tests both parallel and perpendicular to the foam rise direction, to engineering strains exceeding 70%. The uncompressed microstructures show slightly elongated ellipsoidal pores, with elongation aligned parallel to the foam rise direction. The evolution of this microstructural anisotropy during deformation is quantified based on the autocorrelation of the image intensity, and verified via the mean intercept length as well as the shape of individual pores. Trends are consistent across all three methods. In the rise direction, the material remains transversely anisotropic throughout compression. Anisotropy initially decreases with compression, reaches a minimum, then increases up to large strains, followed by a small decrease in anisotropy at the largest strains as pores collapse. Compression perpendicular to the foam rise direction induces secondary anisotropy with respect to the compression axis, in addition to primary anisotropy associated with the foam rise direction. In contrast to compression in the rise direction, primary anisotropy initially increases with compression, and shows a slight decrease at large strains. These surprising non-monotonic trends and qualitative differences in rise and transverse loading are explained based on the compression of initially ellipsoidal pores. Microstructural anisotropy trends reflect macroscopic stress-strain and lateral strain response. These findings provide novel quantitative connections between three-dimensional microstructure and anisotropy in moderate density polymer foams up to large deformation, with important implications for understanding complex three-dimensional states of deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Versatile coating with multifunctional performance for solar steam generation

In this work, a new kind of material, composite complex coating (CCC), with multifunctional performance has been developed for solar steam generation. The CCC has many advantages: (a) Scalability. The fabrication process is facile and mild; it can be realized in aqueous solution at room temperature, without high pressure, toxic organic solvents, or complex equipment. (b) Cost-effectiveness. The reagents used for preparation of CCC are low-cost and readily available. (c) Universality and stability. CCC firmly adheres on surfaces of various substrates with diverse shapes (cotton, filter paper, wood, polyurethane sponge, and even chemically inert and highly hydrophobic polyvinylidene fluoride membranes), and can withstand rinsing treatment (3000 r/min for 96 h), cyclic frost-thaw test (-18 °C ⇌ 30 °C, 90 times), and both high and low pH environments. In addition, many other reported coatings, such as carbon black, fail under similar process strain. (d) Anti-crude oil-fouling property. The CCC possesses stable superhydrophilicity and underwater superoleophobicity, which collectively endow substrates with the ability to resist fouling by oils. (e) Broad and strong light absorption. CCC can transform various substrates with diverse shapes into black materials with broadband light absorption due to its d-d transitions and rough surface. Together, these properties of CCC enable substrates with nearly any structural design to be easily transformed into photothermal materials for efficient solar steam generation. Furthermore, as a proof of concept, poplar wood is treated with CCC, achieving a water evaporation rate of ~1.8 kg m-2 h-1 (one sun), which is a record among wood-based photothermal materials.

14 SOLAR ENERGY↗
DOE OSTI2022

Diffusion-limited hydrolysis in polymeric materials

Polymer degradation under aggressive environmental stressors often develops heterogeneities due to diffusion-limited reaction phenomena. This is well established for diffusion-limited oxidation (DLO), which is known to occur for most polymeric materials at elevated temperatures but has been less summarized for the conditions of diffusion-limited hydrolysis (DLH). Here, an overview of hydrolysis for several materials and a computational model, analogous to the underlying equations for DLO, able to define this diffusion-reaction system is presented. A systematic study of the influence of various parameters, such as water diffusivity, reaction rate and order, and a more in-depth focus on residual isocyanate hydrolysis in a polymeric methylene diphenyl diisocyanate (pMDI) based polyurethane (PU) foam is given. For this system, we present experimental data for model ‘input’ parameters and discuss predictions for different conditions. We conceptually compare the behavior of diffusion-limited oxidation to that of diffusion-limited hydrolysis (DLH). With the mathematical framework and key material properties presented herein, any DLH phenomena following Fickian diffusion behavior can be understood, modeled, and predicted.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cohesive and adhesive degradation in PET-based photovoltaic backsheets subjected to ultraviolet accelerated weathering

Delamination between layers in photovoltaic (PV) backsheets is often reported in the literature, causing voids that can collect moisture, diminish module backside heat dissipation, and reduce the backsheet’s effectiveness as a physical barrier. While backsheets with weathering-resistant fluoropolymer outer layers have traditionally been used in modules, more recent backsheets using non-fluoropolymer outer layers, such as polyethylene terephthalate (PET), have been developed. These backsheets have shown signs of premature degradation, and their adhesion degradation, in particular, has not been widely studied. In the present work, the single cantilever beam (SCB) adhesion test was used to quantify the adhesion energy in two commercially available PET-based backsheets. To study the effect of minor changes in formulation, the backsheets were obtained from same manufacturer and product line but during different years. To study the effect of environmental variables on adhesion degradation, the backsheets were subjected to artificial weathering at controlled temperature, humidity, and ultraviolet (UV) radiation in an indoor weathering chamber, and the adhesion energy was quantified at several intervals of exposure time. Layering structure, composition, and adhesion failure mode were compared between the backsheets, using Raman and infrared spectroscopy and thermogravimetric analysis. The results show a large difference in initial (unexposed) adhesion energy between the backsheets, despite very similar structures and compositions. Following exposure, adhesion energy dropped significantly, primarily due to thermo-hydrolytic degradation of the polyurethane (PU)-based adhesive layers. Significant UV-induced adhesion degradation of the PET outer layer surface was also observed. The study represents an important step in understanding adhesion degradation in PET-based backsheets, suggesting ways in which adhesion integrity – and, correspondingly, module service life – can be improved.

14 SOLAR ENERGY↗
DOE OSTI2025

CRISPR/Cas9 editing of p-COUMAROYL-CoA:MONOLIGNOL TRANSFERASE 1 in maize alters phenolic metabolism, lignin structure, and lignin-first biomass processing

Valorization of lignocellulosic biomass for sustainable production of high-value chemicals is challenged by the complexity of lignin, a phenolic biopolymer. Beyond the classical lignin monomers derived from p-coumaryl, coniferyl, and sinapyl alcohol, grass lignins incorporate substantial amounts of monolignol p-coumarates that are produced by p-COUMAROYL-CoA:MONOLIGNOL TRANSFERASE (PMT). Here, the CRISPR/Cas9-mediated mutation of ZmPMT1 in maize enabled the design of biomass depleted in p-coumaroylated lignin and enriched in guaiacyl lignin. Lignin-first biorefining of stem biomass from zmpmt1 mutants by reductive catalytic fractionation (RCF) generated a lignin oil depleted in carboxylates and enriched in guaiacyl-derived alcohols, which are desirable substrates for bio-based polyurethane synthesis. Furthermore, the reported lignin engineering in maize is a promising strategy for designing a dual-purpose crop, providing both food and feed, along with a renewable feedstock for the production of plant-based chemicals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Exploring strain rate effects upon 3D materials using high speed in situ X-ray tomoscopy

Cellular materials are ubiquitous in our modern society. They may be stochastic gas-blown foams (e.g., polyurethane), foamed starches (e.g., cereals), or, in this case, 3D printed microlattices. Failure in these materials is often driven by surface or sub-surface defects, which may be nucleated at a surface roughness, an interior void, or inclusion interfaces that may not be typically observable. Obfuscating our understanding further, bulk materials are known to exhibit strain-rate-dependent mechanical response, making a subsurface understanding of damage even more critical. For the first time, an in situ uniaxial mechanical loading stage that simultaneously rotates specimens up to 18 Hz was fielded at a synchrotron for 3D tomographic imaging. This capability opens a plethora of materials science opportunities to explore strain rate effects in materials and examining deformation, fracture, and delamination’s (in composites) for a complete 3D picture (movie) of material response. We demonstrate the deformation of 3D printed polymer lattice structures, of three different material types, at 0.25, 1.1, and 2.2 s −1 strain rates. We successfully imaged the 3D deformation of these materials and can directly compare the same printed structure to the three material types at three strain rates, all in 3D. Material point method simulations were applied to one of the materials to better understand the role of voids on the 3D printed structure’s performance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Efficient microwave absorption with V n+1 C n T x MXenes

The availability of MXenes and other two-dimensional conductive nanomaterials with tunable surface chemistry has reshaped the field of electromagnetic protection. However, the high electrical conductivity and low dielectric loss of titanium-based MXenes lead to strong reflection of electromagnetic waves, even when combined with polymers to form composites. Here, we report on the ability of vanadium-based MXenes to provide broadband microwave absorption. Polyurethane composites with ~2 wt % V n+1 C n T x can absorb 90% of electromagnetic waves covering the entire X band. In addition, pure V n+1 C n T x films of submicrometer thickness can provide effective electromagnetic interference shielding. The free electron transport, surface terminations, native defects, and layers arrangement in composites have profound effects on electronic and dielectric properties of V n+1 C n T x MXenes. This study points toward a new frontier for development of thin and highly absorbing MXene-based electromagnetic protection materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Identification of Known and Novel Monomers for Poly(hydroxyurethanes) from Biobased Materials

Sourcing polymers from biobased materials is desirable for a transition to a more sustainable world. However, finding new monomers sourced from biobased molecules requires extensive experimental effort, due to the fact that most biomolecules lack the functional groups or properties needed to serve as a monomer in a particular polymeric system without chemical modification. In this work, we demonstrate a computational screening method to obtain monomers of a non-isocyanate polyurethane (NIPU), polyhydroxyurethane (PHU), from biomolecules. Our method generates candidate monomers from a list of 15 selected biobased starting molecules by performing chemical transformations that are standard to chemical catalysis and organic synthesis on these starting molecules and then screening the results for molecules with moieties that can be used as monomers for a PHU. Product molecules from two generations of reaction, a total number of 20,057, were analyzed automatically to identify molecules that have two or more epoxy or cyclic carbonate functional groups as candidates for further derivatization. These 21 candidate molecules were then subjected to another two generations of reaction, producing a set of 17,913 additional molecules. Further scrutiny of this set for desired functional groups characterizing PHUs and querying against the PubChem database was carried out, and 15 known molecules that are commercially available were identified, with the desirable features that they are predicted to be derived from biobased starting molecules in four or fewer steps. Moreover, molecule space generated from this process was primarily comprised of molecules that were not known to PubChem, indicating the framework also has the ability to generate novel candidate monomers that originate from biobased starting points.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Scale-Up of a Two-Stage Cu-Catalyzed Alkaline-Oxidative Pretreatment of Hybrid Poplar

A two-stage alkaline-oxidative pretreatment of hybrid poplar was investigated at scale (20 L reactor volume) with the goals of understanding how reaction conditions as well as interstage mechanical refining impact downstream process responses. The pretreatment comprises a first stage of alkaline delignification (alkaline pre-extraction) followed by a second delignification stage employing Cu-catalyzed alkaline hydrogen peroxide with supplemental O 2 (O 2 -enhanced Cu-AHP). Increasing pre-extraction severity (i.e., temperature and alkali loading) and pre-treatment oxidation (increasing H 2 O 2 loading) were found to increase mass and lignin solubilization in each stage. Lignin recovered from the first stage was subjected to oxidative depolymerization and led to aromatic monomer yields as high as 23.0% by mass. As a result, lignins recovered from the second stage Cu-AHP pretreatment liquors were shown to exhibit aliphatic hydroxyl contents more than six-fold higher than for a typical hardwood kraft lignin, indicating these lignins could serve as a biobased polyol for a range of polyurethane applications.

09 BIOMASS FUELS↗
DOE OSTI2025

Selective Hydrogenation of Furfural Acetone over a Cu Catalyst: Combined Theoretical and Experimental Study

The selective hydrogenation of biomass-derived hydroxymethyl furfural (HMF)-acetone-HMF (HAH) presents an alternative route to producing highly functionalized polyesters and polyurethanes. While HAH undergoes furan ring hydrogenation over Pd, Ru, and Ni catalysts, furan ring hydrogenation is not observed over Cu. Herein, we combine reaction kinetics experiments and density functional theory calculations to elucidate the selective hydrogenation behavior of HAH over Cu catalysts. We identified furfural acetone (FAc) as a suitable surrogate for modeling HAH hydrogenation over Cu surfaces and performed reaction kinetics experiments between temperatures of 313–393 K and a H 2 partial pressure of 55 bar. Similar to the behavior of HAH, hydrogenation of FAc follows a consecutive two-step hydrogenation pathway over Cu and does not undergo furan ring hydrogenation. The apparent activation energy barriers for hydrogenation of the aliphatic double bond (0.58 eV) and carbonyl (0.43 eV) of FAc measured in a continuous flow reactor setup are consistent with those reported in prior studies for batch HAH hydrogenation. Reaction orders with respect to each reactant, including H 2 and FAc, were determined to be nearly one. Density functional theory (DFT; GGA-PBE-D3) calculations on Cu(111) showed that the hydrogenation of the aliphatic double bond of FAc is more facile than the hydrogenation of the furan ring, which displays weak interactions with the Cu surface. We determined an apparent activation energy barrier for FAc hydrogenation (0.58 eV) that agreed with our DFT predictions (highest barrier for FAc hydrogenation of 0.57 eV). Finally, our DFT calculations further show that weak interactions between the furan ring and Cu surface are responsible for the selective hydrogenation behavior.

Biomass↗
DOE OSTI2013

Quantifying the Solubility of Boron Nitride Nanotubes and Sheets with Static Light Scattering and Refractometry

The dissolution of nanoparticles, particularly those containing boron, is an important area of interest for polymer nanocomposite formation and material development. In this work, the solubility of boron nitride nanotubes (BNNT), functionalized boron nitride nanotubes (FBNNT), and boron nitride sheets (BNZG) is quantified in toluene and THF with static light scattering, refractometry, UV vis spectroscopy, and physical observations. UV vis spectroscopy provides a method to determine the concentration and solubility limits of the solutions tested. Using light scattering, the second virial coefficient, A2, is determined and used to calculate , the solute solvent interaction parameter. The Hildebrand solubility parameter, , is then extracted from this data using the Hildebrand Scatchard Solution Theory. A list of potential good solvents based on the estimated value is provided for each nanoparticle. Single-walled carbon nanotubes (SWNTs) and prepolymers (EN4 and EN8) used to synthesize polyurethanes were also tested, because the published and molar attraction constants of these materials provided a selfconsistent check. The dn/dc of SWNTs and boron-containing particles was measured for the first time in this work. A solvent screen for BN-ZG provides additional information that supports the obtained and . Three systems were found to have values below 0.5 and were thermodynamically soluble: BNNT in THF, EN8 in THF, and EN8 in toluene.

Mutz, M↗
DOE OSTI2024

Characterization of spent nuclear fuel canister surface roughness using surface replicating molds

In this study we present a replication method to determine surface roughness and to identify surface features when a sample cannot be directly analyzed by conventional techniques. As a demonstration, this method was applied to an unused spent nuclear fuel dry storage canister to determine variation across different surface features. In this study, an initial material down-selection was performed to determine the best molding agent and determined that non-modified Polytek PlatSil23-75 provided the most accurate representation of the surface while providing good usability. Other materials that were considered include Polygel Brush-On 35 polyurethane rubber (with and without Pol-ease 2300 release agent), Polytek PlatSil73-25 silicone rubber (with and without PlatThix thickening agent and Pol-ease 2300 release agent), and Express STD vinylpolysiloxane impression putty. The ability of PlatSil73-25 to create an accurate surface replica was evaluated by creating surface molds of several locations on surface roughness standards representing ISO grade surfaces N 3 , N 5 , N 7 , and N 8 . Overall, the molds were able to accurately reproduce the expected roughness average (R a ) values, but systematically over-estimated the peak-valley maximum roughness (R z ) values. Using a 3D printed sample cell, several locations across the stainless steel spent nuclear fuel canister were sampled to determine the surface roughness. These measurements provided information regarding variability in normal surface roughness across the canister as well as a detailed evaluation on specific surface features (e.g., welds, grind marks, etc.). The results of these measurements can support development of dry storage canister ageing management programs, as surface roughness is an important factor for surface dust deposition and accumulation. This method can be applied more broadly to different surfaces beyond stainless steel to provide rapid, accurate surface replications for analytical evaluation by profilometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Depolymerization of polyesters by a binuclear catalyst for plastic recycling

Plastics play an essential role in modern society, however, the relentless growth of their production is threatening both human health and ecosystems. As a result, there are intensive efforts in developing recycling technologies to repurpose waste plastics into the building blocks for valuable materials. Here we show a binuclear complex that can catalyze the degradation of polyethylene terephthalate (PET)-the most widely used polyester globally-and a wide spectrum of other plastics including polylactic acid (PLA), polybutylene adipate terephthalate (PBAT), polycaprolactone (PCL), polyurethane (PU) and Nylon 66. Inspired by hydrolases, the group of enzymes that catalyze bond cleavages with water, the present catalyst design features biomimetic Zn-Zn sites which activate the plastic, stabilize the key intermediate, and enable intramolecular hydrolysis. This synthetic catalyst delivers activities of 36 mg PET d -1 g catal -1 toward PET depolymerization at pH 8 and 40 oC, and of 577 g PET d -1 g catal -1 at pH 13 and 90 oC for scalable PET recycling. We further demonstrate the closed-loop production of a bottle-grade PET. This work presents a practical and viable solution to the sustainable management of plastics waste.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Vertically aligned P(VDF-TrFE) core-shell structures on flexible pillar arrays

PVDF and P(VDF-TrFE) nano- and micro- structures are widely used due to their potential applications in several fields, including sensors, actuators, vital sign transducers, and energy harvesters. In this study, we developed vertically aligned P(VDF-TrFE) core-shell structures using high modulus polyurethane acrylate (PUA) pillars as the support structure to maintain the structural integrity. In addition, we were able to improve the piezoelectric effect by 1.85 times from 40 ± 2 to 74 ± 2 pm/V when compared to the thin film counterpart, which contributes to the more efficient current generation under a given stress, by making an effective use of the P(VDF-TrFE) thin top layer as well as the side walls. We attribute the enhancement of piezoelectric effects to the contributions from the shell component and the strain confinement effect, which was supported by our modeling results. We envision that these organic-based P(VDF-TrFE) core-shell structures will be used widely as 3D sensors and power generators because they are optimized for current generations by utilizing all surface areas, including the side walls of core-shell structures.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Reduction of ablated surface expansion in pulsed-power-driven experiments using an aerosol dielectric coating

The quality of warm dense matter samples created by magnetic compression can be largely affected by material ablation. When the ablated material carries currents, local instabilities can grow, which can lead to nonuniformities in the final magnetic pressure. Extending the previous work by Peterson et al., Awe et al., and Hutchison et al., the experiments reported here demonstrate that the expansion of the ablated material can be significantly reduced by using a simple aerosol spray technique. Coating the current-carrying surfaces with a 30–60-μm layer of polyurethane reduced the expansion of the ablated material by a factor of 2 and eliminated material ejections from sharp corners. Here, this technique, tested at the Michigan Accelerator for Inductive Z-Pinch Experiments pulsed power facility at the University of Michigan with currents up to 400 kA, could allow the production of homogeneous warm dense matter samples on pulsed-power drivers. Because of the simplicity of this method, this work brings forth an important contribution to pulsed-power-driven experiments designed to study nuclear fusion, material properties, and radiation science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗