Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma material interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Abradable dual-density ceramic turbine seal system

A plasma sprayed dual density ceramic abradable seal system for direct application to the HPT seal shroud of small gas turbine engines. The system concept is based on the thermal barrier coating and depends upon an additional layer of modified density ceramic material adjacent to the gas flow path to provide the desired abradability. This is achieved by codeposition of inert fillers with yttria stabilized zirconia (YSZ) to interrupt the continuity of the zirconia struture. The investigation of a variety of candidate fillers, with hardness values as low as 2 on Moh's scale, led to the conclusion that solid filler materials in combination with a YSZ matrix, regardless of their hardness values, have a propensity for compacting rather than shearing as originally expected. The observed compaction is accompanied by high energy dissipation in the rub interaction, usually resulting in the adhesive transfer of blade material to the stationary seal member. Two YSZ based coating systems which incorported hollow alumino silicate spheres as density reducing agents were surveyed over the entire range of compositions from 100 percent filler to 100 percent YSZ. Abradability and erosion characteristics were determined, hardness and permeability characterized, and engine experience acquired with several system configurations.

Clingman, D. L.↗
DOE OSTI2020

Effect of Impurity Atoms on Thermonuclear Yield

The presence of impurity atoms in an inertial confinement fusion (ICF) implosion can greatly affect the burning of the thermonuclear fuel. This is a serious concern for attaining ignition as high atomic number atoms, such as carbon, can mix into the hot spot and reach the deuterium–tritium (DT) fuel, absorb energy from the implosion, and radiate away that energy. The temperature of the DT fuel drops and reduces the reactivity of the fuel resulting in lower thermonuclear yield. Fuel impurities can also be a useful diagnostic as when higher-Z atoms, such as Ar, Kr, and Xe, are purposefully mixed into the fuel. From the spectra emitted by these atoms, the temperature and density of the fuel can be deduced. The long history of using such tracer atoms by the national ICF program shows the great advances in experimental technique, diagnostic instruments, and atomic-physics modeling over the past 50 years. A particular set of experiments, the “High-Z” campaign, is reviewed in depth as this was the most systematic study of tracer element composition and quantity ever reported. Difficulties in interpreting the results of those experiments due to the limited code capabilities at that time are discussed. A main concern for the High-Z campaign was the then current state of non-Local Thermodynamic Equilibrium (nLTE) atomic physics models. The present state of nLTE modeling and its implementation in Los Alamos’s multi-physics codes is discussed in this report. To further the understanding of the complex interaction of high-Z atoms in the gas, a survey of relevant existing experimental platforms at the National Ignition Facility (NIF) and the Omega Laser Facility are presented along with the current state of pertinent diagnostics at NIF and Omega. This review concludes with a discussion of the trade-off available between temperature and volume of the imploded ICF capsule with the goal of maximizing the total yield.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

Trace Element Abundances Measured in Concentric and Texturally Distinct Fine-Grained Rims Surrounding Allende Chondrules

Layered rims of dust-sized material surround some chondrules and other early formed nebular particles, such as calcium aluminum inclusions in chondritic meteorites. In the Allende meteorite most chondrules(~85%) are un-rimmed and in direct contact with the host matrix material [1]. When present, rim thickness appears correlated to underlying particle size in both the Allende and Murchison chondrites [1,2]. This diverse behavior strongly argues for pre-parent body formation of rimmed particles as they traversed distinct (cooler and/or dustier) nebular environments [1]. Nebular rim formation involves accretion of unequilibrated dust to chondrule surfaces, recording evidence for the formation of at least two separate particle populations (chondrules and dust) that interacted in the nebula, and therefore potentially record distinct nebular reservoirs (e.g. [3-5]). Additionally, some particles exhibit textural evidence for multiple rim layers, (e.g., [1], further investigated herein). Herein, we evaluate the chemistry of concentrically and texturally distinct chondrule rim layers to investigate the possibility of discrete rim formation events recorded by individual chondrules (Fig. 1A,B). Using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) we measure major, minor, and trace elements of the rims and particles in Allende. Samples were characterized in detail previously by electron microanalysis for their mineralogy, textures, particle size, and rim thickness(es) [1].

Chondrites↗
NASA NTRS1972

Surface magnetometer experiments - Internal lunar properties and lunar field interactions with the solar plasma.

The remanent magnetic fields measured to date on the moon are 38 plus or minus 3 gamma at Apollo 12 in Oceanus Procellarum; 103 plus or minus 5 and 43 plus or minus 6 gamma at two Apollo 14 sites separated by 1.1 km in Fra Mauro; and 6 plus or minus 4 gamma at the Apollo 15 Hadley-Apennines site. Measurements show that the 38-gamma remanent field at Apollo 12 is compressed to 54 gamma by a solar wind pressure increase of 7 x 10 to the minus 8th dyne/sq cm. The change in magnetic pressure is proportional to the change in plasma pressure, and the field is compressed primarily in the z (northerly) component. The electrical conductivity of the lunar interior has been determined from magnetic step transient measurements made on the lunar dark side. A range of monotonic conductivity profiles is calculated that provides a fit to the normalized data curve within error limits. Deeper than 90 km into the moon, the conductivity rises from 0.0003 mhos/m to 0.01 mhos/m at 1000 km depth. These conductivities, when converted to temperatures for an assumed lunar material of peridotite, suggest the existence of a thin outer layer (perhaps 90 km thick) in which the temperature rises sharply to 850 to 1050 K, then increases gradually to 1200 to 1500 K at a depth of about 1000 km.

Dyal, P.↗
DOE OSTI2020

Ultra-Fast High-Precision Metallic Nanoparticle Synthesis using Laser-Accelerated Protons

Laser-driven proton acceleration, as produced during the interaction of a high-intensity (I > 1 × 10 18 W/cm 2 ), short pulse (<1 ps) laser with a solid target, is a prosperous field of endeavor for manifold applications in different domains, including astrophysics, biomedicine and materials science. These emerging applications benefit from the unique features of the laser-accelerated particles such as short duration, intense flux and energy versatility, which allow obtaining unprecedented temperature and pressure conditions. In this paper, we show that laser-driven protons are perfectly suited for producing, in a single sub-ns laser pulse, metallic nanocrystals with tunable diameter ranging from tens to hundreds of nm and very high precision. Our method relies on the intense and very quick proton energy deposition, which induces in a bulk material an explosive boiling and produces nanocrystals that aggregate in a plasma plume composed by atoms detached from the proton-irradiated surface. The properties of the obtained particles depend on the deposited proton energy and on the duration of the thermodynamical process. Suitably controlling the irradiated dose allows fabricating nanocrystals of a specific size with low polydispersity that can easily be isolated in order to obtain a monodisperse nanocrystal solution. Molecular Dynamics simulations confirm our experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

The effects of pre-plasma scale length on the relativistic electron beam directionality

The effects of pre-plasmas on the electron beam directionality was experimentally and numerically investigated. Single material and layered targets made of Ti and/or CH were used to simultaneously measure high-energy (≥3 MeV) electrons along two directions, pre-pulse energy and pre-plasma density. The electron directionality is quantified by using a new parameter, the electron energy ratio of the total kinetic energies along the two directions. Measurements and radiation–hydrodynamic (RH) simulations show that a large (≥3.5 μm) plasma scale length at the critical surface enhances electrons along the laser axis, and such pre-plasma conditions could only be achieved with the CH targets. Particle-in-cell simulations were performed on the RH generated pre-plasmas from Ti and CH targets, and the results show that the CH target provided conditions for higher forward momentum gains by electrons. First, the CH target allowed longer distances for electrons to interact with laser. Second, the intense laser pulse modified the critical surface, but the resulting surface differed. The CH target resulted in a smooth surface where a retro-reflection was observed while the Ti target resulted in a rippled surface that scattered the reflected light. As results, the CH electrons gained higher forward momentum via a direct-laser-acceleration in the counter propagating laser fields. So the results presented in this article show a way of controlling the high-energy electron directionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

Effect of Cyclic Aeroconvective Heating on Flexible Thermal Insulations

This paper describes the effect of cyclic aeroconvective heating on the thermal performance of ceramic flexible insulations considered for potential use as thermal protection systems or thermal insulations for future hypersonic vehicles such as the Reusable Launch Vehicles (RLV's) and other applications where structures require thermal protection from severe heating. The thermal response of these materials after exposure to cyclic aeroconvective heating from a plasma arc is described. The thermal insulations evaluated were Composite Flexible Blanket Insulations composed of an outer layer of aluminoborosilicate fabric and alumina insulation. The insulations were evaluated with and without a high emissivity coating. These insulations were exposed to the plasma arc stream for nine minutes reaching surface temperatures of 1150 C and a heat flux of 10.5 W/sq cm. Insulations were exposed three, six, or nine times in order to demonstrate reusability and to determine the effect oi coatings on the surface durability of these insulations. Test results demonstrated the capability of these insulations to protect either composite or metallic structures from high heating environments. It is shown that high emittance coatings reduce backface temperatures. The durability of these insulations when impacted at low velocities was also demonstrated. The interaction of the coatings with the ceramic fibers was characterized. An analytical thermal model was utilized to correlate experimental thermal test results with calculated values.

Kourtides, Demetrius A.↗
DOE OSTI2022

Formation of carbon and oxygen rich surface layer on high purity magnesium by atmospheric carbon dioxide plasma

Carbon and oxygen-rich corrosion barrier layer formed on Mg by a simple and scalable CO 2 atmospheric plasma (CO 2 -AP) process. The reactive CO 2 -AP interacts with the Mg surface and forms a unique layered structure with the top MgCO 3 /MgO-intermixed particulates pillars and the bottom dense layer. The surface features were simultaneously formed on the nano-/micro-structured MgO layer by carbonate molecules, plasma-active CO 2 molecules, and/or other volatile organic compounds on the nano-/micro-structured MgO particle layer. The resulting surfaces after CO 2 -AP were either hydrophobic or hydrophilic and exhibited lower anodic current or high resistance for Mg corrosion. For the hydrophobic surfaces of CO 2 -AP treated Mg, molecular dynamic simulations were performed to understand the origin of hydrophobicity and identified that the amorphous carbon layers formed on the Mg surface are the source. The environmentally benign abundant-gas-based process enables the cost reduction associated with waste treatment, generation of by-product, and supply of raw material.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Open-Air Manufacturing of Efficient Large-Area Perovskite Solar Cells to Meet Stability and Cost Targets

This SETO-funded project (DE-EE0009516) developed a fully open-air manufacturing pathway for perovskite solar cells and modules, eliminating vacuum-based processing steps while improving device stability. Open-air ultrasonic spray deposition, solution combustion synthesis, rapid thermal processing, and atmospheric plasma curing were developed and optimized for all functional device layers — perovskite absorber, hole transport layers (HTLs), electron transport layers (ETLs), transparent conducting oxides (TCOs), and rear electrodes — without reliance on vacuum. Sprayed organic ETLs preserved perovskite crystal structure and enabled power conversion efficiencies exceeding 20%, and open-air processed TCOs and rear electrodes achieved optoelectronic performance comparable to sputtered alternatives at substantially lower manufacturing cost. Device stability was assessed through accelerated aging protocols aligned with IEC and ISOS standards, combined with high-throughput optical diagnostics that identified key degradation mechanisms and antagonistic interactions among heat, humidity, and illumination stressors. A comprehensive technoeconomic analysis quantified the cost and throughput advantages of open-air manufacturing over conventional vacuum-based processes, identifying vacuum deposition as the dominant cost driver and demonstrating a clear pathway toward the $0.02/kWh target. The project produced five peer-reviewed journal publications, eleven conference presentations, two patents/applications, and five Ph.D. dissertations.

14 SOLAR ENERGY↗
DOE OSTI2024

Orbital-Free Quantum Simulation Methods for Application to Warm Dense Matter (Final Technical Report)

Predictive simulations for prediction of condensed system behavior in state conditions far from ambient is increasingly crucial to DOE priorities. Warm dense matter (WDM) is the paradigm: temperature T > 1-15 eV, pressures P to 1 Mbar or greater. Experiments under such state conditions are difficult and costly. We summarize work driven by the need and opportunity to make free-energy density functional theory (DFT) as powerful a tool for ab initio simulation of matter under such extreme conditions as ground state DFT is for ordinary matter Advancing orbital-free DFT (OF-DFT) to eliminate the Kohn-Sham (KS) scaling bottleneck in such simulations is the other priority. The concurrent challenge for both goals is the intrinsic complexity of WDM. We summarize 15 years of successes and major progress on (1) free energy exchange-correlation functionals; (2) non-interacting free energy functionals (counterpart to T=0 Kohn-Sham kinetic energy density functionals); (3) rigorous results and constraints for free-energy DFT; (4) software for free energy DFT calculations in both conventional Kohn-Sham and OF-DFT form; (5) de-orbitalization of advanced orbital-dependent ground state functionals for use in OF-DFT; (6) demonstration calculations; (7) ancillary achievements (e.g. major review articles, secondary explorations motivated by primary goals).

36 MATERIALS SCIENCE↗
DOE OSTI2020

A pulsed-power implementation of “Laser Gate” for increasing laser energy coupling and fusion yield in magnetized liner inertial fusion (MagLIF)

Magnetized Liner Inertial Fusion (MagLIF) at Sandia National Laboratories involves a laser preheating stage,where a few-ns laser pulse passes through a few-micron-thick plastic window to preheat gaseous fusion fuel contained within the MagLIF target. Interactions with this window reduce heating e ciency and mix window and target materials into the fuel. A recently proposed idea called \Laser Gate" involves removing the window well before the preheating laser is applied. In this article, we introduce experimental proof-of-principle results for a pulsed-power implementation of Laser Gate, where a thin current-carrying wire weakens the perimeter of the window, allowing the fuel pressure to push the window open and away from the preheating laser path. For this e ort, transparent targets were fabricated and a test facility capable of studying this version of Laser Gate was developed. A 12-frame bright- eld laser schlieren/shadowgraphy imaging system captured the window opening dynamics on microsecond timescales. The images exhibit that the window remains largely intact as it opens and detaches from the target. A column of escaping pressurized gas appears to prevent the detached window from inadvertently moving into the preheating laser path.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Reassembly of Peptide Nanofibrils on Live Cell Surfaces Promotes Cell–Cell Interactions

Nature regulates cellular interactions through the cell-surface molecules and plasma membranes. Despite advances in cell-surface engineering with diverse ligands and reactive groups, modulating cell–cell interactions through scaffolds of the cell-binding cues remains a challenging endeavor. Here, we assembled peptide nanofibrils on live cell surfaces to present the ligands that bind to the target cells. Surprisingly, with the same ligands, reducing the thermal stability of the nanofibrils promoted cellular interactions. Characterizations of the system revealed a thermally induced fibril disassembly and reassembly pathway that facilitated the complexation of the fibrils with the cells. Using the nanofibrils of varied stabilities, the cell–cell interaction was promoted to different extents with free-to-bound cell conversion ratios achieved at low (31%), medium (54%), and high (93%) levels. Further, this study expands the toolbox to generate desired cell behaviors for applications in many areas and highlights the merits of thermally less stable nanoassemblies in designing functional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Si content in methacrylamide-containing A- b -(B- r -C) block copolymers and its impact on reactive ion etching properties

Block copolymers (BCPs) of an A-block-(B-random-C) architecture have been explored as materials for nanolithography because the composition and chemistry of the random block enables modification of thermodynamic and wetting properties to meet manufacturing criteria. Here, in this study, A-b-(B-r-C) BCPs created by an amidation reaction of polystyrene-block-poly(pentafluorophenyl methacrylate) (PS-b-PPFMA) with controlled amounts of Si add insight to previous conclusions about the dual contributions of BCP chemistry and reactive ion etch (RIE) gas chemistry on etch properties. We focus on two RIE etch characteristics: organosilicon etch resistance in H 2 /N 2 plasma etching and enhanced removal of non-styrenic structures in an Ar/O 2 etch. Consistent with previous studies, higher amounts of Si result in greater etch resistance under H 2 /N 2 RIE, where at least ∼10 wt. % Si is necessary to exhibit sufficient etch resistance. By contrast, Ar/O 2 etching resulted in etch rates independent of Si content. We observe previously unreported surface roughening aligned with morphological domains during the H 2 /N 2 etch of modified PS-b-PPFMA BCPs. Limited in the amount of allowable Si to attain equal surface energy between blocks, these BCPs are further disqualified in forming a Si-containing mask. However, in an Ar/O 2 etch, the same BCPs exhibit suitable etch contrast and smooth domain structures, forming a uniform PS mask. Ultimately, this study uses the chemical flexibility of these materials to demonstrate the mechanisms of interactions between BCP and etch chemistry that must be considered to design effective materials for pattern transfer applications.

Eom, Christopher J. [University of Chicago, IL (Un↗
DOE OSTI2026

Pulsed laser synthesis of mesoporous metal chalcogenide thin films

Mesoporous films of the metal chalcogenide B-FeSe were grown on MgO substrates by KrF pulsed laser deposition (PLD) in an argon background. At 100 mTorr, gated intensified charge-coupled device imaging and ion probe measurements showed that the plasma plume responsible for crystal growth initially comprised three components, with distinct expansion velocities. Plume interactions with the substrate heater and ablation target gave rise to complex dynamics, including collisions between the charged leading edge—rebounding between the substrate and the target—and slower-moving species in the plume interior. Film growth was dominated by species with kinetic energies ≤0.5 eV/atom. X-ray reflectivity revealed that films grown in this environment—with a substrate temperature of 350 ° C, a laser fluence of 1.0 J cm −2 , and a 7.5 mm 2 spot area—formed a porous framework with 15% porosity. Atomic force microscopy showed surface features that suggest pore sizes below 100 nm. X-ray diffraction indicated that the porous films were epitaxial with respect to the substrate and likely grew by oriented-attachment of gas-phase molecular clusters or very small nanoparticles, in contrast to the conventional epitaxy of vacuum films from atomic constituents. The in-plane orientation of the mesoporous films was B-FeSe [100]||[110] MgO, attributed to the soft landing of pre-formed crystallites on the MgO substrates, where protruding Se rows of B-FeSe aligned with corrugations of the MgO surface. In conclusion, this work implies that growth of candidate electrocatalyst materials by PLD in inert gas background may allow mesoporous frameworks with a single crystallographic orientation that expose specific crystal facets for electrochemical reactions and active site engineering.

cluster epitaxy↗
DOE OSTI2022

Mitigation of plasma–wall interactions with low-Z powders in DIII-D high confinement plasmas

Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in H-mode plasmas (I p = 1 MA, B t = 2 T, P NB = 6 MW, < n e > = 3.6–5.0 · 10 19 m –3 ) into the upper small-angle slot divertor for 2 s intervals at constant rates of 3–204 mg s –1 . The multi-species BN powders at a rate of 54 mg s –1 showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy W mhd by 5%. Rates of 204 mg s –1 of boron nitride powder further reduce edge localized mode-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an n = 2 tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. Furthermore, the results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Plasma technology for lignocellulosic biomass conversion toward an electrified biorefinery

Lignocellulosic biomass conversion to renewable, carbon-neutral materials, fuels, and chemicals is the cornerstone of the transition to a sustainable future bioeconomy. Green energy in the form of electricity needs to be coupled with or substitute conventional thermally driven processes to realize small-scale, economically viable and environmentally friendly biorefineries. Gas discharge plasmas enable the conversion of renewable electric energy, supplied in the form of an electric field, to chemical energy through the formation of a highly reactive environment that can induce several transformations related to agricultural waste valorization processes. Herein, we review the application of plasma technology to lignocellulosic biomass upgrade, aiming to provide the scientific background and technical challenges in this rapidly emerging research field. To bridge the gap between plasma science and biomass valorization technologies, we initially present the technical aspects of plasma reactors related to biomass processing and further discuss the advances in plasma processing for each biomass conversion technology, providing insights into the related plasma chemistry and interaction mechanisms. Here, we first focus on the low and medium-temperature biomass conversion processes, including biomass pretreatment and delignification to promote enzyme or acid-catalyzed hydrolysis to sugars and biomass liquefaction using plasma electrolysis. Then we discuss the high and very high-temperature conversion processes, such as plasma-assisted pyrolysis and gasification to syngas and plasma application to tar removal, combustion, and vitrification. Overall, this review provides knowledge at the interface of plasma science and biomass conversion technology to promote the interaction between the individual communities, which is crucial for the further advancement of the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Few-cycle optical field breakdown and damage of gallium oxide and gallium nitride

Both gallium oxide and gallium nitride have great potential for use as high power transparent conducting oxide materials for a wide range of optoelectronic applications. It is, therefore, important to determine the dynamic optical field breakdown for these materials. Here, we report laser damage thresholds for Ga 2 O 3 and GaN using 9 fs few-cycle pulses with a center wavelength near 760 nm. We determine laser-induced damage thresholds (LIDTs) for both single pulse and multi-pulse exposures, with multi-pulse LIDT showing significant reduction compared to single pulse LIDT (in some cases, >50%), possibly due to laser-induced defects. We show that Ga 2 O 3 and GaN have an ultrafast optical field breakdown of 23 and 18 GV/m when nearly polarized along their [010] and [111] planes, respectively, extending their suitability for high power applications to the ultrashort pulse regime. To accurately characterize the excited carrier density criteria in which apparent laser damage occurs, carrier excitation dynamics for the entire laser pulse interaction were simulated using a modified Keldysh ionization model. For the measured single-shot threshold fluences, the plasma critical density was surpassed by 2 orders of magnitude and 2D finite-difference time-domain simulations were employed to understand the pulse interaction near the surface.

Tripepi, Michael↗
DOE OSTI2024

Principles of two-dimensional terahertz spectroscopy of collective excitations: The case of Josephson plasmons in layered superconductors

Two-dimensional terahertz spectroscopy (2DTS), a terahertz analog of nuclear magnetic resonance, is a new technique poised to address many open questions in complex condensed matter systems. The conventional theoretical framework used ubiquitously for interpreting multidimensional spectra of discrete quantum level systems is, however, insufficient for the continua of collective excitations in strongly correlated materials. Here, in this work, we develop a theory for 2DTS of a model collective excitation, the Josephson plasma resonance in layered superconductors. Starting from a mean-field approach at temperatures well below the superconducting phase transition, we obtain expressions for the multidimensional nonlinear responses that are amenable to intuition derived from the conventional single-mode scenario. We then consider temperatures near the superconducting critical temperature T c , where dynamics beyond mean-field become important and conventional intuition fails. As fluctuations proliferate near T c , the dominant contribution to nonlinear response comes from an optical parametric drive of counterpropagating Josephson plasmons, which gives rise to 2D spectra that are qualitatively different from the mean-field predictions. As such, and in contrast to one-dimensional spectroscopy techniques, such as third harmonic generation, 2DTS can be used to directly probe thermally excited finite-momentum plasmons and their interactions. Our theory can readily be tested in cuprates, and we discuss implications beyond the present context of Josephson plasmons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗