Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pans”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The orbit of Phi Cygni measured with long-baseline optical interferometry - Component masses and absolute magnitudes

The orbit of the double-lined spectroscopic binary Phi Cygni, the distance to the system, and the masses and absolute magnitudes of its components are presented via measurements with the Mar III Optical Interferometer. On the basis of a reexamination of the spectroscopic data of Rach & Herbig (1961), the values and uncertainties are adopted for the period and the projected semimajor axes from the present fit to the spectroscopic data and the values of the remaining elements from the present fit to the Mark III data. The elements of the true orbit are derived, and the masses and absolute magnitudes of the components, and the distance to the system are calculated.

Armstrong, J. T.↗

Cost-effective optical switch matrix for microwave phased-array

An all-fiber (6x6) optical shutter switch matrix with the control system for microwave phased array has been demonstrated. The device offers the advantages of integrated configuration, low cost, low power consumption, small size, and light weight. The maximum extinction ratio (among 36 individual pixel) of this switch matrix at 840 nm is 24.2 dB, and the switching time is less than 120 microsec. In addition to phased array application, this low cost switch matrix is extremely attractive for fiber optic switching networks.

Pan, J. J.↗

High-speed electro-optic switch with -80 dB crosstalk

Special device modeling, design and layout, and precision processing controls were employed to fabricate new balanced-bridge 2x2 and 4x4 switches on X-cut, Y-propagation LiNbO3 substrate using Ti indiffused optical waveguides. The best of these devices achieved extinction ratio and crosstalk isolation of better than 93 dB electrically (46.5 dB optically). The new switches demonstrate good reproducibility with electrical crosstalk less than -80 dB.

Pan, J. J.↗

High angular resolution measurements of Algol

Algol (Beta Per) is an extensively studied triple system which includes an eclipsing pair. Using long baseline optical interferometry, the AB-C system of Algol has had its geometric and physical parameters determined with higher resolution and accuracy than obtained with other techniques. The orbital elements are determined, without the use of spectroscopic data, as follows: P = 680.05 d +/- 0.06 d, T = JD 2,446,931.4 +/- 1.5, e = 0.225 +/- 0.005, a-double-prime = 94.61 +/- 0.22 mas, i = 83.98 deg +/- 0.09 deg, omega = 310.29 deg +/- 0.08 deg, and Omega = 312.26 deg +/- 0.13 deg. The distance to Algol is determined as 28.2 +/- 0.8 pc. The absolute magnitude of the C component is 2.86 +/- 0.46 mag, and its mass is 1.50 +/- 0.11 solar mass. The observational results indicate the difference of the inclinations between the eclipsing pair and the wide pair to be within 1.6 deg. For the first time, the eclipsing of the close pair was observed interferometrically, and the results compare well with those from photometry.

Pan, Xiaopei↗

On domains of convergence in optimization problems

Numerical optimization algorithms require the knowledge of an initial set of design variables. Starting from an initial design x(sup 0), improved solutions are obtained by updating the design iteratively in a way prescribed by the particular algorithm used. If the algorithm is successful, convergence is achieved to a local optimal solution. Let A denote the iterative procedure that characterizes a typical optimization algorithm, applied to the problem: Find x belonging to R(sup n) that maximizes f(x) subject to x belonging to Omega contained in R(sup n). We are interested in problems with several local maxima (x(sub j))(sup *), j=1, ..., m, in the feasible design space Omega. In general, convergence of the algorithm A to a specific solution (x(sub j))(sup *) is determined by the choice of initial design x(sup 0). The domain of convergence D(sub j) of A associated with a local maximum (x(sub j))(sup *) is a subset of initial designs x(sup 0) in Omega such that the sequence (x(sup k)), k=0,1,2,... defined by x(sup k+1) = A(x(sup k)), k=0,1,... converges to (x(sub j))(sup *). The set D(sub j) is also called the basin of attraction of (x(sub j))(sup *). Cayley first proposed the problem of finding the basin of attraction for Newton's method in 1897. It has been shown that the basin of attraction for Newton's method exhibits chaotic behavior in problems with polynomial objective. This implies that there may be regions in the feasible design space where arbitrarily close starting points will converge to different local optimal solutions. Furthermore, the boundaries of the domains of convergence may have a very complex, even fractal structure. In this paper we show that even simple structural optimization problems solved using standard gradient based (first order) algorithms exhibit similar features.

Diaz, Alejandro R.↗

Genetic-evolution-based optimization methods for engineering design

This paper presents the applicability of a biological model, based on genetic evolution, for engineering design optimization. Algorithms embodying the ideas of reproduction, crossover, and mutation are developed and applied to solve different types of structural optimization problems. Both continuous and discrete variable optimization problems are solved. A two-bay truss for maximum fundamental frequency is considered to demonstrate the continuous variable case. The selection of locations of actuators in an actively controlled structure, for minimum energy dissipation, is considered to illustrate the discrete variable case.

Rao, S. S.↗

Improved frame synchronization schemes for INMARSAT-B/M SCPC and TDM channels

This paper proposes faster, more robust, frame synchronization schemes for various Inmarsat-B and Inmarsat-M communication and signalling channels. Equations are developed which permit frame synchronization strategies of the type specified by Inmarsat to be evaluated in terms of average true lock time, average false maintenance time, and average search time. Evaluation of the currently specified framing schemes shows that a significant performance improvement is obtained by optimizing the threshold parameters of the scheme. The optimization seeks a compromise between the conflicting requirements of maximizing true lock time and minimizing search time.

Pan, Si-Ming↗

Whirl measurements on leakage flows in turbomachine models

The beneficial effects claimed for whirl control devices demonstrate that the dynamic behavior of rotors is influenced by the fluid whirl in shaft and balance drum seals. The present paper reports results from two series of experiments, the first on the factors affecting the whirl at the seal inlet, and the second on the variation of whirl velocity along the seal. In both cases the LDA measurement technique required the clearance between the fixed and rotating parts of the models to be substantially greater than occurs in real machines, but the results are indicative nevertheless. Experimental and theoretical results are given for the radial distribution of whirl velocity in the gap between impeller shroud and pump casing. Results of tests with modified stator surfaces are also shown. This work leads naturally into the second series of experiments where some preliminary measurements of velocity distribution in the clearance between a fixed stator and a rotating shaft are reported for a range of inlet whirl conditions.

Addlesee, A. J.↗

Global ozone data from the meteor-3/TOMS ultraviolet spectrometer

A new TOMS instrument (Total Ozone Mapping Spectrometer) was launched from the Plesetsk Cosomodrome, Russia on August 15, 1991. The purpose of the joint project between the U.S. and Russia was to continue the long-term record of ozone measurements from Nimbus-7/TOMS (launched in October 1978). Ozone data from the two satellites compare very closely. When the orbital positions were nearly the same, the comparison over the entire globe showed an offset of 2 percent with a standard deviation of 5 percent. Comparisons were made with several ground based M124 and Dobson stations showing good agreement in absolute value and with the day-to-day variations seen by the ground stations.

Herman, J. R.↗

Effect of stratospheric aerosol layers on the TOMS/SBUV ozone retrieval

An evaluation of the optical effects of stratospheric aerosol layers on total ozone retrieval from space by the TOMS/SBUV type instruments is presented here. Using the Dave radiative transfer model we estimate the magnitude of the errors in the retrieved ozone when polar stratospheric clouds (PSC's) or volcanic aerosol layers interfere with the measurements. The largest errors are produced by optically thick water ice PSC's. Results of simulation experiments on the effect of the Pinatubo aerosol cloud on the Nimbus-7 and Meteor-3 TOMS products are presented.

Torres, O.↗

Fundamental and subharmonic excitation for an oscillator with several tunneling diodes in series

Connecting several tunneling diodes in series shows promise as a method for increasing the output power of these devices as millimeter-wave oscillators. However, due to the negative differential resistance (NDR) region in the dc I-V curve of a single tunneling diode, a circuit using several devices connected in series, and biased simultaneously in the NDR region, is dc unstable. Because of this instability, an oscillator with several tunneling diodes in series has a demanding excitation condition. Excitation using an externally applied RF signal is one approach to solving this problem. This is experimentally demonstrated using an RF source, both with frequency close to as well as with frequency considerably lower than the oscillation frequency. Excitation by an RF (radio frequency) source with a frequency as low as one sixth of the oscillation frequency was demonstrated in a proof-of-principle experiment at 2 GHz, for an oscillator with two tunnel diodes connected in series. Strong harmonics of the oscillation signal were generated as a result of the highly nonlinear dc I-V curve of the tunnel diode and a large signal oscillator design. Third harmonic output power comparable to that of the fundamental was observed in one oscillator circuit. If submillimeter wave resonant-tunneling diodes (RTD's) are used instead of tunnel diodes, this harmonic output may be useful for generating signals at frequencies well into the terahertz range.

SUBHARMONIC EXCITATION↗

Gravity gradient or gravity jitter induced viscous stress and moment fluctuations in microgravity

The dynamical behavior of fluids affected by the asymmetric gravity gradient and gravity jitter accelerations, in particular the effect of surface tension on partially-filled rotating fluids with a special example applicable to a full-scale Gravity Probe-B Spacecraft dewar tank, has been investigated. Results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient acceleration indicated one-up one-down and one-down and one-up oscillations of two bubbles in the cross-section of doughnut profiles in the vertical r-z plane of a rotating dewar, and an eccentric contour of a bubble rotating around the axis of the dewar in the horizontal r-theta plane. Results of slosh wave excitation along the liquid-vapor interface induced by gravity jitter acceleration showed an equivalent to the time-dependent oscillatory force which pushes a bubble in the combined bubble motion of down-and-up and leftward-and-rightward as the bubble is rotating with respect to a rotating dewar axis. Fluctuations of fluid stress forces, fluid stress moments, and moment arm of fluid moment exerted on the dewar wall of the container due to slosh wave excitations driven by gravity gradient acceleration or gravity jitter acceleration are also investigated.

Hung, R. J.↗

Sloshing dynamics modulated angular momentum fluctuations actuated by gravity gradient acceleration associated with spacecraft slew motion

The mathematical formulation of orbital spacecraft sloshing dynamics for a partially filled cryogenic superfluid liquid helium II in a dewar container actuated by the gravity gradient acceleration associated with slew motion is studied. The Advanced X-Ray Astrophysics Facility-Spectroscopy (AXAF-S) spacecraft is chosen as a practical example in this study. Explicit mathematical expressions which manage orbital galaxy gradient acceleration with slew motion which is acting on the spacecraft fluid systems are derived. The numerical computation of sloshing dynamics is based on the non-inertia frame spacecraft bound coordinates and the solution of time-dependent, three-dimensional formulations of partial differential equations subject to initial and boundary conditions. This study discloses the capillary effect of sloshing dynamics governed liquid-vapor interface fluctuations, angular momentum and moment fluctuations of fluid system, and also buble mass center fluctuations driven by the gravity gradient acceleration associated with slew motion which affects the stability of the orbital spacecraft fluid system in a microgravity environment.

Hung, R. J.↗

Spectroscopic detection of the secondaries of the Hyades interferometric spectroscopic binary theta(sup 2) Tauri and of the interferometric spectroscopic binary alpha Andromedae

We report new high-resolution, wide-wavelength-coverage CCD observations of the visual and near-infrared spectra of the interferometric spectroscopic binaries theta(sup 2) Tau (primary spectral type A 7 III) and alpha And (primary spectral type B8 IVpMnHg), which allow the first direct spectroscopic detection of their secondaries. We have measured primary and secondary radial velocities and used them to redetermine the spectroscopic orbits of the primaries, make an improved determination of K(sub 2) for theta(sup 2) Tau, and measure K(sub 2) for alpha And for the first time. The spectroscopic orbits combined with the interferometrically measured visual orbits of theta(sup 2) Tau and alpha And provide masses and distances, M(sub 1) = 2.1 +/- 0.3 solar mass, M(sub 2) = 1.6 +/- 0.2 solar mass, and d = 44.1 +/- 2.2 pc for theta(sup 2) Tau and M(sub 1) = 5.5 +/- 0.5 solar mass, M(sub 2) = 2.3 +/- 0.2 solar mass, and d = 34.0 +/- 1.3 pc for alpha And. The distance to theta(sup 2) Tau and a foreground correction of 0.07 +/- 0.05 mag set the distance to the center of the Hyades cluster at 45.5 +/- 2.5 pc, or m - M = 3.29 +/- 0.12. Indirect estimates of the mass of theta(sup 2) Tau's primary, made via the mass-luminosity relation and via the Hyades cluster turnoff mass, are consistent with these dynamical masses for its primary and secondary. But in the case of alpha And, the mass-luminosity relation suggests that our dynamical masses for its primary and secondary may be too large. For alpha And somewhat smaller dynamical masses (4.0 and 1.9 solar mass) and the correspondingly smaller distance (31 pc), required by the corresponding larger orbital parallax, provide results consistent with the mass-luminosity relation for normal stars.

Tomkin, Jocelyn↗

Sloshing dynamics modulated fluid angular momentum and moment fluctuations driven by orbital gravity gradient and jitter accelerations in microgravity

The dynamical behavior of spacecraft propellant affected by the asymmetric combined gravity gradient and jitter accelerations, in particular the effect of surface tension on partially-filled rotating fluids applicable to a full-scale Gravity Probe-B Spacecraft dewar tank has been investigated. Three different cases of orbital accelerations: (1) gravity gradient-dominated, (2) equally weighted between gravity gradient and jitter, and (3) gravity jitter-dominated accelerations are studied. The results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient-dominated accelerations provide a torsional moment with tidal motion of bubble oscillations in the rotating dewar. The results are clearly seen from the twisting shape of the bubble oscillations driven by gravity gradient-dominated acceleration. The results of slosh wave excitation along the liquid-vapor interface induced by gravity jitter-dominated acceleration indicate the results of bubble motion in a manner of down-and-up and leftward-and-rightward movement of oscillation when the bubble is rotating with respect to rotating dewar axis. Fluctuations of angular momentum, fluid moment and bubble mass center caused by slosh wave excitations driven by gravity gradient acceleration or gravity jitter acceleration are also investigated.

Hung, R. J.↗

Simulation of sloshing dynamics induced forces and torques actuated on dewar container driven by gravity gradient and jitter accelerations in microgravity

Some experimental spacecraft use superconducting sensors for gyro read-out and so must be maintained at a very low temperature. The boil-off from the cryogenic liquid used to cool the sensors can also be used, as the Gravity Probe B (GP-B) spacecraft does, as propellant to maintain attitude control and drag-free operation of the spacecraft. The cryogenic liquid for such spacecraft is, however, susceptible to both slosh-like motion and non-axisymmetric configurations under the influence of various kinds of gravity jitter and gravity gradient accelerations. Hence, it is important to quantify the magnitude of the liquid-induced perturbations on the spacecraft. We use the example of the GP-B to investigate such perturbations by numerical simulations. For this spacecraft disturbances can be imposed on the liquid by atmospheric drag, spacecraft attitude control maneuvers, and the earth's gravity gradient. More generally, onboard machinery vibrations and crew motion can also create disturbances. Recent studies suggest that high frequency disturbances are relatively unimportant in causing liquid motions in comparison to low frequency ones. The results presented here confirm this conclusion. After an initial calibration period, the GP-B spacecraft rotates in orbit at 0.1 rpm about the tank symmetry axis. For this rotation rate, the equilibrium liquid free surface shape is a 'doughnut' configuration for all residual gravity levels of 10(exp -6) g(sub 0) or less, as shown by experiments and by numerical simulations; furthermore, the superfluid behavior of the 1.8 K liquid helium used in GP-B eliminates temperature gradients and therefore such effects as Marangoni convection do not have to be considered. Classical fluid dynamics theory is used as the basis of the numerical simulations here, since Mason's experiments show that the theory is applicable for cryogenic liquid helium in large containers. To study liquid responses to various disturbances, we investigate and simulate three levels of gravity jitter (10(exp -6), 10(exp -7), and 10(exp -8) g(sub 0)) each at three predominant frequencies (0.1, 1.0, and 10 Hz), combined with a gravity gradient appropriate for the GP-B orbit. Dynamical evolution of sloshing dynamics excited fluid forces and torque fluctuations exerted on the dewar container driven by the combined gravity gradient and jitter accelerations are also investigated and simulated.

Hung, R. J.↗

Three-dimensional transient flow of spin-up in a filled cylinder with oblique gravity force

Three-dimensional transient flow profiles of spin-up in a fully liquid filled cylinder from rest with gravity acceleration at various direction are numerically simulated and studied. Particular interests are concentrated on the development of temporary reverse flow zones and Ekman layer right after the impulsive start of spin-up from rest, and decay before the flow reaching to the solid rotation. Relationship of these flow developments and differences in the Reynolds numbers of the flow and its size selection of grid points concerning the numerical instabilities of flow computations are also discussed. In addition to the gravitational acceleration along the axial direction of the cylindrical container, a series of complicated flow profiles accompanied by three-dimensional transient flows with oblique gravitational acceleration has been studies.

Hung, R. J.↗

Bolt cutter functional evaluation

The Aerospace Corporation has been implementing finite difference and finite element codes for the analysis of a variety of explosive ordnance devices. Both MESA-2D and DYNA3D have been used to evaluate the role of several design parameters on the performance of a satellite separation system bolt cutter. Due to a lack of high strain rate response data for the materials involved, the properties for the bolt cutter and the bolt were selected to achieve agreement between computer simulation and observed characteristics of the recovered test hardware. The calculations provided insight into design parameters such as the cutter blade kinetic energy, the preload on the bolt, the relative position of the anvil, and the anvil shape. Modeling of the cutting process clarifies metallographic observation of both cut and uncut bolts obtained from several tests. Understanding the physical processes involved in bolt cutter operation may suggest certain design modifications that could improve performance margin without increasing environmental shock response levels.

S. Goldstein↗