Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical interference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Compact Multi-Gas Monitor for Life Support Systems Control in Space: Evaluation Under Realistic Environmental Conditions

Advanced space life support systems require lightweight, low-power, durable sensors for monitoring critical gas components. A luminescence-based optical flow-through cell to monitor carbon dioxide, oxygen, and humidity has been developed and was demonstrated using bench top instrumentation under environmental conditions relevant to portable life support systems, including initially pure oxygen atmosphere, pressure range from 3.5 to 14.7 psi, temperature range from 50 F to 150 F, and humidity from dry to 100% RH and under liquid water saturation. This paper presents the first compact readout unit for these optical sensors, designed for the volume, power, and weight restrictions of a spacesuit portable Life support system and the analytical characterization of the optical sensors interrogated by the novel optoelectronic system. Trace gas contaminants in a space suit, originating from hardware and material off-gassing and crew member metabolism, are from many chemical families. The result is a gas mix much more complex than the pure oxygen fed into the spacesuit, which may interfere with gas sensor readings. The paper also presents an evaluation of optical sensor performance when exposed to the most significant trace gases reported to be found in spacesuits. The studies were conducted with the spacecraft maximum allowable concentrations for those trace gases and the calculated 8-hr. concentrations resulting from having no trace contaminant control system in the ventilation loop. Finally, a profile of temperature, pressure, humidity, and gas composition for a typical EVA mission has been defined, and the performance of sensors operated repeatedly under simulated EVA mission conditions has been studied.

Delgado, Jesus↗

Atomic scale interface engineering by modulated ion-assisted deposition applied to soft x-ray multilayer optics

Cr/Sc and Ni/V multilayers, intended as normal incidence soft x-ray mirrors and Brewster angle polarizers, have been synthesized by employing a novel modulated low-energy and high-flux ion assistance as a means of engineering the interfaces between the subnanometer layers on an atomic scale during magnetron sputter deposition. To reduce both roughness and intermixing, the ion energy was modulated within each layer. The flat and abrupt interfaces yielded soft x-ray mirrors with near-normal incidence reflectances of R = 20.7% at the Sc 2p absorption edge and R = 2.7% at the V 2p absorption edge. Multilayers optimized for the Brewster angle showed a reflectance of R = 26.7% and an extinction ratio of Rs/Rp=5450 for Cr/Sc and R = 10% and Rs/Rp=4190 for Ni/V. Transmission electron microscopy investigations showed an amorphous Cr/Sc structure with an accumulating high spatial frequency roughness. For Ni/V the initial growth mode is amorphous and then turns crystalline after {approx}1/3 of the total thickness, with an accumulating low spatial frequency roughness as a consequence. Elastic recoil detection analyses showed that N was the major impurity in both Cr/Sc and Ni/V with concentrations of 15 at. % and 9 at. %, respectively, but also O (3 at. % and 1.3 at. %) and C (0.5 at. % and 1.9 at. %) were present. Simulations of the possible normal incidence reflective properties in the soft x-ray range of 100-600 eV are given, predicting that reflectivities of more than 31% for Cr/Sc and 5.8% for Ni/V can be achieved if better control of the impurities and the deposition process is employed. The simulations also show that Cr/Sc is a good candidate for mirrors for the photon energies between the absorption edges of B (E = 188 eV) and Sc (E = 398.8 eV)

36 MATERIALS SCIENCE↗

Optical constants measurements of liquids for modeling aerosolized threats

Spectroscopic identification of aerosolized chemical threats is challenging due to the complex nature of the photon/particle interaction, as well as the diversity of possible particle sizes, morphologies, and compositions. Constructing a database of laboratory - measured transmittance spectra that covers each permutation is not practical. However, calculation of the spectra using the measured optical constants as a function of wavenumber, n(?) and k(?), for each of the liquids and/or solids composing the aerosol particles provides a viable alternative. These synthetic spectra (vis-à-vis laboratory-measured spectra) can be used to identify chemicals of interest and subtract out background interferents in field measurements. Using a well-established multiple pathlength approach, we measure the optical constants n/k for liquids that may be found as chemical species of interest or common background interferents aerosolized in plumes. These measurements are also used to generate several test case aerosol synthetic spectra.

Lockwood, Schuyler↗

Strain-concentration for fast, compact photonic modulation and non-volatile memory

A critical figure of merit (FoM) for electro-optic (EO) modulators is the transmission change per voltage, d T / d V . Conventional approaches in wave-guided modulators maximize d T / d V via a high EO coefficient or longer light-material interaction lengths but are ultimately limited by material losses and nonlinearities. Optical and RF resonances improve d T / d V at the cost of spectral non-uniformity, especially for high- Q optical cavity resonances. Here, we introduce an EO modulator based on piezo-strain-concentration of a photonic crystal cavity to address both trade-offs: (i) it eliminates the trade-off between d T / d V and waveguide loss—i.e., enhancement of the resonance tuning efficiency d v c / d V for the fixed EO coefficient, waveguide length, and cavity Q —and (ii) at high DC strains it exhibits a non-volatile (NV) cavity tuning Δ v c ,NV for passive memory and programming of multiple devices into resonance despite fabrication variations. The device is fabricated on a scalable silicon nitride-on-aluminum nitride platform. We measure d v c / d V =177±1MHz/V, corresponding to Δ v c =40±0.32GHz for a voltage spanning ±120V with an energy consumption of δ U /Δ v c =0.17nW/GHz. The modulation bandwidth is flat up to ω BW,3dB /2 π =3.2±0.07MHz for broadband DC-AC and 142±17MHz for resonant operation near a 2.8 GHz mechanical resonance. Optical extinction up to 25 dB is obtained via Fano-type interference. Strain-induced beam-buckling modes are programmable under a “read-write” protocol with a continuous, repeatable tuning range of 5±0.25GHz, allowing for storage and retrieval, which we quantify with mutual information of 2.4 bits and a maximum non-volatile excursion of 8 GHz. Using a full piezo-optical finite-element-model (FEM) we identify key design principles for optimizing strain-based modulators and chart a path towards achieving performance comparable to lithium niobate-based modulators and the study of high strain physics on-chip.

Wen, Y. Henry (ORCID:0009000685423628)↗

Acousto-optic filtering of lidar signals

The predominant part of the noise in lidar receivers is created by the background radiation; therefore, one of the most important elements of the receiving optics is a spectrally selecting filter placed in front of the photodetector. Interference filters are usually used to transmit a given wavelength. Specific properties of the interference filters, such as simple design, reliability, small size, and large aperture, combined with high transmission coefficient and narrow spectral band, make them the preferred spectral device in many cases. However, problems arise in applications such as the Differential Absorption Lidar (DIAL) technique, where fast tuning within a wide spectral region is necessary. Tunable acousto-optical filters (TAOF), used recently in astrophysical observations to suppress the background radiation, can be employed with success in lidar sounding. They are attractive due to the possibility for fast spectral scanning with a narrow transmission band. The TAOF's advantages are fully evident in DIAL lidars where one must simultaneously receive signals at two laser frequencies.

Kolarov, G.↗

Light scattering from ultracold atoms in optical lattices as an optical probe of quantum statistics

We study off-resonant collective light scattering from ultracold atoms trapped in an optical lattice. Scattering from different atomic quantum states creates different quantum states of the scattered light, which can be distinguished by measurements of the spatial intensity distribution, quadrature variances, photon statistics, or spectral measurements. In particular, angle-resolved intensity measurements reflect global statistics of atoms (total number of radiating atoms) as well as local statistical quantities (single-site statistics even without optical access to a single site) and pair correlations between different sites. As a striking example we consider scattering from transversally illuminated atoms into an optical cavity mode. For the Mott-insulator state, similar to classical diffraction, the number of photons scattered into a cavity is zero due to destructive interference, while for the superfluid state it is nonzero and proportional to the number of atoms. Moreover, we demonstrate that light scattering into a standing-wave cavity has a nontrivial angle dependence, including the appearance of narrow features at angles, where classical diffraction predicts zero. The measurement procedure corresponds to the quantum nondemolition measurement of various atomic variables by observing light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)

2D transition metal carbides, carbonitrides, and nitrides, known as MXenes, are a rapidly growing family of 2D materials with close to 30 members experimentally synthesized, and dozens more studied theoretically. They exhibit outstanding electronic, optical, mechanical, and thermal properties with versatile transition metal and surface chemistries. They have shown promise in many applications, such as energy storage, electromagnetic interference shielding, transparent electrodes, sensors, catalysis, photothermal therapy, etc. The high electronic conductivity and wide range of optical absorption properties of MXenes are the key to their success in the aforementioned applications. However, relatively little is currently known about their fundamental electronic and optical properties, limiting their use to their full potential. In this review, MXenes' electronic and optical properties from both theoretical and experimental perspectives, as well as applications related to those properties, are discussed, providing a guide for researchers who are exploring those properties of MXenes.

2D transition metal carbides↗

THE IMPACT OF QUANTUM INTERFERENCE BETWEEN DIFFERENT J-LEVELS ON SCATTERING POLARIZATION IN SPECTRAL LINES

The spectral line polarization produced by optically pumped atoms contains a wealth of information on the thermal and magnetic structure of a variety of astrophysical plasmas, including that of the solar atmosphere. A correct decoding of such information from the observed Stokes profiles requires a clear understanding of the effects that radiatively induced quantum interference (or coherence) between pairs of magnetic sublevels produces on these observables, in the absence of and in the presence of magnetic fields of arbitrary strength. Here we present a detailed theoretical investigation of the role of coherence between pairs of sublevels pertaining to different fine-structure J-levels, clarifying when it can be neglected for facilitating the modeling of the linear polarization produced by scattering processes in spectral lines. To this end, we apply the quantum theory of spectral line polarization and calculate the linear polarization patterns of the radiation scattered at 90 Degree-Sign by a slab of stellar atmospheric plasma, both taking into account and neglecting the above-mentioned quantum interference. Particular attention is given to the {sup 2}S - {sup 2}P, {sup 5}S - {sup 5}P, and {sup 3}P - {sup 3}S multiplets. We point out the observational signatures of this kind of interference and analyze its sensitivity to the energy separation between the interfering levels, to the amount of emissivity in the background continuum radiation, to lower-level polarization, and to the presence of a magnetic field. Some interesting applications to the following spectral lines are also presented: Ca II H and K, Mg II h and k, Na I D{sub 1} and D{sub 2}, the Ba II 4554 #Angstrom# and 4934 #Angstrom# resonance lines, the Cr I triplet at 5207 #Angstrom#, the O I triplet at 7773 #Angstrom#, the Mg I b-lines, and the H{alpha} and Ly{alpha} lines of H I.

79 ASTRONOMY AND ASTROPHYSICS↗

Density fluctuation measurements using beam emission spectroscopy on Heliotron J

This paper describes the measurement of the density fluctuation using beam emission spectroscopy in Heliotron J, having the non-symmetrical helical-magnetic-axis configuration. In order to optimize the sightlines, the numerical calculations are carried out to estimate the spatial resolution and the observation location. When a tangential neutral beam is used as diagnostic one, suitable sightlines from the newly installed diagnostic port are selected whose spatial resolution {Delta}{rho} is less than {+-}0.07 over the entire plasma region. Modification of the interference filter and the detection systems enables us to measure the radial profile of the density fluctuation. Each of the three coherent modes due to the fast-ion-driven magnetohydrodynamic instabilities has different radial structure of the density fluctuation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-color ghost interference with photon pairs generated in hot atoms

We report on an experimental observation of a two-photon ghost interference experiment. A distinguishing feature of our experiment is that the photons are generated via a non-degenerated spontaneous four-wave mixing process in a hot atomic ensemble; therefore the photon has narrow bandwidth. Besides, there is a large difference in frequency between two photons in a pair. Our works may be important to achieve more secure, large transmission capacity long-distance quantum communication.

74 ATOMIC AND MOLECULAR PHYSICS↗

Origin of fine oscillations in the photoluminescence spectrum of 2-dimensional electron gas formed in AlGaN/GaN high electron mobility transistor structures

An unambiguous identification of the fine oscillations observed in the low temperature photoluminescence (PL) spectra of AlGaN/GaN based high electron mobility transistor (HEMT) structures is carried out. In literature, such oscillations have been erroneously identified as the sub-levels of 2-dimensional electron gas (2DEG) formed at AlGaN/GaN heterointerface. Here, the origin of these oscillations is probed by performing the angle dependent PL and reflectivity measurements under identical conditions. Contrary to the reports available in literature, we find that the fine oscillations are not related to 2DEG sub-levels. The optical characteristics of these oscillations are mainly governed by an interference phenomenon. In particular, peculiar temperature dependent redshift and excitation intensity dependent blueshift, which have been interpreted as the characteristics of 2DEG sub-levels in HEMT structures by other researchers, are understood by invoking the wavelength and temperature dependence of the refractive index of GaN within the framework of interference phenomenon. The results of other researchers are also consistently explained by considering the fine oscillatory features as the interference oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling and optimization of photon pair sources based on spontaneous parametric down-conversion

We address the problem of efficient modeling of photon pairs generated in spontaneous parametric down-conversion and coupled into single-mode fibers. It is shown that when the range of relevant transverse wave vectors is restricted by the pump and fiber modes, the computational complexity can be reduced substantially with the help of the paraxial approximation, while retaining the full spectral characteristics of the source. This approach can serve as a basis for efficient numerical calculations or can be combined with analytically tractable approximations of the phase-matching function. We introduce here a cosine-Gaussian approximation of the phase-matching function that works for a broader range of parameters than the Gaussian model used previously. The developed modeling tools are used to evaluate characteristics of the photon pair sources such as the pair production rate and the spectral purity quantifying frequency correlations. Strategies to generate spectrally uncorrelated photons, necessary in multiphoton interference experiments, are analyzed with respect to trade-offs between parameters of the source.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental demonstration of quantum contextuality with nonentangled photons

We present an experimental test of quantum contextuality by using two-photon product states. The experimental results show that the noncontextual hidden-variable theories are violated by nonentangled states in spite of the local hidden-variable theories can be violated or not. We find that the Hong-Ou-Mandel-type quantum interference effect causes the quantum contextuality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reconstruction of spatial qutrit states based on realistic measurement operators

Spatial qudit states can be realized by using multislits to discretize the transverse momentum of a photon. The merit of this kind of spatial qudit states is that the implementation of higher-dimensional qudits is relatively easy. As we have recently shown, the quantum states of these spatial qudits can be analyzed by scanning a single interference pattern. This method of single scan tomography can also be applied at higher dimensions, but the reconstruction becomes more sensitive to smaller details of the scanned patterns as the dimensions increase. In this paper, we investigate the effect of finite measurement resolution on the single scan tomography of spatial qutrits. Realistic measurement operators describing the spatial resolution of the measurement are introduced and the corresponding pattern functions for quantum state reconstruction are derived. We use the pattern functions to analyze experimental results for entangled pairs of spatial qutrits generated by spontaneous parametric downconversion. It is shown that a reliable reconstruction of the quantum state can be achieved with finite measurement resolution if this limitation of the measurement is included in the pattern functions of single scan tomography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

We report on the performance, structure and stability of periodic multilayer films containing silicon carbide (SiC) and aluminum (Al) layers designed for use as reflective coatings in the extreme ultraviolet (EUV). We find that SiC/Al multilayers prepared by magnetron sputtering have low stress, good temporal and thermal stability, and provide good performance in the EUV, particularly for applications requiring a narrow spectral bandpass, such as monochromatic solar imaging. Transmission electron microscopy reveals amorphous SiC layers and polycrystalline Al layers having a strong <111> texture, and relatively large roughness associated with the Al crystallites. Fits to EUV reflectance measurements also indicate large interface widths, consistent with the electron microscopy results. SiC/Al multilayers deposited by reactive sputtering with nitrogen comprise Al layers that are nearly amorphous and considerably smoother than films deposited nonreactively, but no improvements in EUV reflectance were obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distributed Real-time Plume Monitoring for Deep Sea Mineral Extraction​

In the emerging industry of deep-sea mining for minerals and deposits (e.g. polymetallic nodules for nickel, cobalt, copper, and manganese), more data is required to understand the effects of sediment plume generation and predict the distribution of disturbed sediment. There are two main sources of plume generation, the first being at the active mining site where the “collector” directly removes the top layer of the sea floor. The other is the “midwater plume” consisting of unwanted sediment that was collected during extraction that is pumped back into the aphotic zone. The vast majority of plume generation is caused by the collector, causing detrimental and long-lasting impacts on seafloor ecosystems due to the lack of wave activity or strong currents at the sea floor. Therefore, it is crucial to invest in the infrastructure to support the study and constant monitoring over a large area of the sea floor where plume generation is present. Due to the limited number of usable channels and power requirements, current subsea wireless communications technologies are not well suited to instrumenting the large areas of the sea floor needed to monitor plume migration. The scope of this effort is to transition experimental demonstrations of high-bandwidth, full-duplex scalable underwater laser communications to the seafloor in an open ocean environment. Specifically tackling challenges associated with the dynamic nature of the subsea world, including but not limited to, deployment logistics, sustainability, and range. The goal is to enable the internet of underwater things for deep sea industries by broadening the capabilities of subsea communications. By using high-precision laser transmitters, many of the challenges current subsea optical systems face can be circumvented, such as power consumption, interference, and bandwidth limitations. This approach lends itself to wireless interlinking multi-node networks, in series or parallel, facilitating the implementation of a wide array of sensor types. This interlinking allows all the data gathered from the network to be processed through a single hardline uplink to the surface, lowering the complexity required for near real-time data processing. Additionally, the laser control systems produce metadata that can be used to help characterize the water column between the nodes. Combining data from various sensors such as turbidity, temperature, current velocity with metadata such as beam attenuation and deflection can produce a high-resolution model of sea floor conditions around an active mining zone. The resulting near real-time model can be used to optimize location and flow rate of the mining operation to minimize and quantify the environmental impact.

Mons, Ishan↗

Ultraviolet absorption of common spacecraft contaminants

Organic contamination of ultraviolet optical systems is discussed. Degradation of signal by reflection, scattering, interference, and absorption is shown. The first three processes depend on the physical state of the contaminant while absorption depends on its chemical structure. The latter phenomenon is isolated from the others by dissolving contaminants in cyclohexane and determining absorption spectra from 2100A to 3600A. A variety of materials representing the types of contaminants responsible for most spaceflight hardware problems is scanned and the spectra is presented. The effect of thickness is demonstrated for the most common contaminant, di(2 ethyl hexyl)phthalate, by scanning successive dilutions.

Colony, J. A.↗

Single mode wavelength control of modulated AlGaAs lasers with external and internal etalon feedback

Single mode lasing without mode hops has been obtained for VSIS and CSP laser diodes with an external etalon attached to the laser's front facet for up to an 8 C range CW and a 4 C range pulsed, with .07 nm/C tuning. Tests of thin tapered-thickness (TTT) laser diodes show CW and pulsed single mode lasing over 10 C and 2 C ranges, respectively, with .08 nm/C tuning. An analysis of the TTT structure reveals the equivalent of an internal etalon. The time-resolved pulsed behavior for both types of lasers show single mode lasing within the proper temperature ranges with minor modes present only early in the optical pulse, if at all. The external etalon produces noticeable interference fringes in the farfield pattern, while those of the TTT lasers are smooth. Ongoing CW lifetest results indicate stability to within one longitudinal mode after a few hundred hours of operation, along with at least several thousand hours lifetime.

Maynard, William L.↗