SEARCH · Engineering Papers

Results for “nonlinear mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1982

A spectral energetics analysis of atmospheric blocking

The spectral energetics of two blocking case studies from the winter of 1978-79 are calculated. One case occurred over the North Atlantic and the other over the North Pacific. The temporal evolution and geographical distribution of the energetics of the planetary-scale (zonal harmonic wavenumbers 1-4) and the intermediate-scale (wavenumbers 5-10) wave ensembles are examined to identify the physical mechanisms important in the blocking process. The Atlantic block was forced by the nonlinear interaction of intense baroclinic cyclone-scale waves with barotropic, ultralong waves. The Pacific blocking resulted from the baroclinic amplification of planetary-scale waves. In addition, at least two necessary conditions are required for the development of blocking. First, one of the forcing mechanisms must be in operation, and second, the phase of the antecedent planetary-scale waves must be such that the forcing mechanism can amplify them into a blocking pattern. In each of the cases studied, the blocking developed downstream of intense intermediate- or large-scale cyclogenesis.

Hansen, A. R.↗

NASA NTRS1983

Mechanics of composite materials: Recent advances; Proceedings of the Symposium, Virginia Polytechnic Institute and State University, Blacksburg, VA, August 16-19, 1982

The present conference on the mechanics of composites discusses microstructure's influence on particulate and short fiber composites' thermoelastic and transport properties, the elastoplastic deformation of composites, constitutive equations for viscoplastic composites, the plasticity and fatigue of metal matrix composites, laminate damping mechanisms, the micromechanical modeling of Kevlar/epoxy composites' time-dependent failure, the variational characterization of waves in composites, and computational methods for eigenvalue problems in composite design. Also discussed are the elastic response of laminates, elastic coupling nonlinear effects in unsymmetrical laminates, elasticity solutions for laminate problems having stress singularities, the mechanics of bimodular composite structures, the optimization of laminated plates and shells, NDE for laminates, the role of matrix cracking in the continuum constitutive behavior of a damaged composite ply, and the energy release rates of various microcracks in short fiber composites.

Hashin, Z.↗

NASA NTRS1982

Nonlinear force-free magnetic fields

The nonlinear properties of force-free magnetic fields are reviewed with particular reference to the mechanisms for the sudden release of stored energy in flares during the quasi-steady evolution of solar fields. It is shown that in the solar atmosphere, force-free fields with a nonconstant scalar function in the field equations are more likely to occur than those with a constant scalar function, and the nonlinear properties of these fields may give rise to many interesting physical effects. Consideration is then given to two possible mechanisms of field evolution: a model in which a force-free field in a medium of infinite electrical conductivity evolves in response to slowly changing boundary conditions brought about by photospheric motions in the solar active region, and a model in which a field in a medium of small finite electrical conductivity evolves in response to the slow Ohmic dissipation of the electric current.

Low, B. C.↗

NASA NTRS2004

Nonlinear filtering and limiting in high order methods for ideal and non-ideal MHD

The various filtering mechanisms and base scheme options of the newly developed adaptive numerical dissipation control in spatially high order filter schemes for the ideal and non-ideal magnetohydrodynamics (MHD) equations are investigated. These filter schemes are applicable to complex unsteady MHD high-speed shock/shear/turbulence problems. They also provide a natural and efficient way for the minimization of Div(B) numerical error. The type of spatial base scheme to be used in conjunction with our filter idea is very general. For example, spectral, compact and non-compact spatially central finite difference schemes are possible candidates. The adaptive numerical dissipation mechanism consists of automatic detection of different flow features as distinct sensors to signal the appropriate type and amount of numerical dissipation/filter where needed and to leave the rest of the region free from numerical dissipation contamination. The numerical dissipation considered consists of high order linear dissipation for the suppression of high frequency oscillation and the nonlinear dissipative portion of high-resolution shock-capturing methods for discontinuity capturing. The applicable nonlinear dissipative portion of high-resolution shock-capturing methods is also very general. The objective of this paper is to investigate the performance of using compact and non-compact central base schemes in conjunction with three commonly used types of nonlinear numerical dissipation for both the ideal and non-ideal MHD. This extended abstract shows the performance of three nonlinear filters in conjunction with a sixth-order non-compact spatial central base scheme. In the final paper, the high order compact spatial central base scheme will be illustrated and compared with the non-compact base scheme. The reason for the investigation of the high order compact spatial central base scheme over the non-compact base scheme is to evaluate if additional accuracy can be gained in regions of fine scale turbulence that are away from shocks/shears.

Yee,H. C.↗

DOE OSTI2024

Exploring nonlinear Rashba effect and spin Hall conductivity in Janus MXenes W 2 ⁢CO ⁢𝑋 (𝑋=S, Se, Te)

Rashba spin-orbit coupling (RSOC) facilitates spin manipulation without relying on an external magnetic field, opening up exciting possibilities for advanced spintronic devices. In this paper, we examine the effects of crystal momentum (𝑘) nonlinearity and anisotropy on the conventional Rashba effect, with a particular focus on their impact on the spin Hall conductivity (SHC) in a newly predicted family of 2D Janus materials, W 2 ⁢CO⁢𝑋 (𝑋 =S, Se, Te). Using first-principles density functional theory calculations, we confirm the dynamical and mechanical stability of the studied 2D materials. Strikingly, this materials family exhibits pronounced nonlinear Rashba spin splitting at the Γ point of Brillouin zone near the Fermi level, which cannot be adequately described by the linear-𝑘 Rashba model. Therefore, third-order momentum contributions (𝑘 3 ) must be incorporated into the Rashba Hamiltonian. Our analysis reveals that among the studied systems, W 2 ⁢COS exhibits the highest 𝑘 3 contribution of −45.9 eV Å 3 , despite having the lowest linear Rashba constant. Here, a detailed analysis of electronic structure reveals topologically nontrivial behavior in these 2D materials, yielding sizable SHC that is primarily governed by the nonlinear Rashba effect. Notably, these materials also exhibit large spin Hall angle (0.018–2.5 at E 𝐹 ), which is comparable to that of in bulk topological insulators like Bi 2 ⁢Se 3 and Bi 2 ⁢Te 3 , and surpassing those in narrow bandgap bulk semiconductors GeTe and SnTe, as well as heavy metals such as Pt. Sizable SHC, large spin Hall angles, and the ability to tune SHC via electric fields without altering the topological properties, rooted in the crystal field splitting, underscore the potential of these materials for spintronic applications.

Electronic structure↗

NASA NTRS1995

Use of an adjoint model for finding triggers for Alpine lee cyclogenesis

The authors propose a new procedure, designated the adjoint-based genesis diagnostic (AGD) procedure, for studying triggering mechanisms and the subsequent genesis of the synoptic phenomena of interest. This procedure makes use of a numerical model sensitivity to initial conditions and the nonlinear evolution of the initial perturbations that are designed using this sensitivity. The model sensitivity is evaluated using the associated adjoint model. This study uses the dry version of the National Center for Atmospheric Research Mesoscale Adjoint Modeling System (MAMS) for the numerical experiments. The authors apply the AGD procedure to two cases of Alpine lee cyclogenesis that were observed during the Alpine Experiment special observations period. The results show that the sensitivity fields that are produced by the adjoint model and the associated initial perturbations are readily related to the probable triggering mechanisms for these cyclones. Additionally, the nonlinear evolution of these initial perturbations points toward the physical processes involved in the lee cyclone formation. The AGD experiments for a weak cyclone case indicate that the MAMS forecast model has an underrepresented topographic forcing due to the sigma vertical coordinate and that this model error can be compensated by adjustments in the initial conditions that are related to the triggering mechanisms, which is not associated with the topographic blocking mechanism.

Vukicevic, Tomislava↗

DOE OSTI2020

Global gyrokinetic particle simulations of microturbulence in W7-X and LHD stellarators

Global gyrokinetic particle simulations of electrostatic ion temperature gradient (ITG) instability show that the most unstable eigenmode is localized to some magnetic fieldlines or discrete locations on the poloidal plane in the Wendelstein 7-X (W7-X) stellarator due to its mirror-like magnetic fields, which vary strongly in the toroidal direction and induce coupling of more toroidal harmonics (n) to form the linear eigenmode than in the Large Helical Device (LHD) stellarator. Nonlinear electrostatic simulation results show that self-generated zonal flows are the dominant saturation mechanism for the ITG instabilities in both the LHD and W7-X. Additionally, radial widths of the fluctuation intensity in both the LHD and W7-X are significantly broadened from the linear phase to the nonlinear phase due to turbulence spreading. Finally, nonlinear spectra in the W7-X are dominated by low-n harmonics, which can be generated both by nonlinear toroidal coupling of high-n harmonics and by linear toroidal coupling with large amplitude zonal flows due to the 3D equilibrium magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Quantum kinetics of anomalous and nonlinear Hall effects in topological semimetals

Highlights: • Linear and photogalvanic anomalous Hall responses are systematically derived. • Extrinsic mechanisms of AHE include Gaussian, diffractive, hybrid skew scattering. • Diagrammatic calculations are matched to semiclassical picture of AHE. • The Pancharatnam phase of multifold fermions determines the skew scattering amplitude. • Photon-induced interband scattering are accompanied by coordinate shifts. We present a systematic microscopic derivation of the semiclassical Boltzmann equation for band structures with the finite Berry curvature based on Keldysh technique of nonequilibrium systems. In the analysis, an AC electrical driving field is kept up to quadratic order, and both cases of small and large frequencies corresponding to intra- and interband transitions are considered. In particular, this formulation is suitable for the study of nonlinear Hall effect and photogalvanic phenomena. The role of impurity scattering is carefully addressed. Specifically, in addition to previously studied side-jump and skew-scattering processes, quantum interference diffractive contributions are now explicitly incorporated within the developed framework. This theory is applied to multifold fermions in topological semimetals, for which the generic formula for the skew scattering rate from the Pancharatnam phase is obtained along with the corresponding anomalous Hall conductivity.

36 MATERIALS SCIENCE↗

NASA NTRS1983

A proposed approach to the application of nonlinear irreversible thermodynamics to fracture in composite materials

The fracture criteria upon which most fracture mechanics is based involves an energy balance that is not appropriate for the fracture mechanics of viscoelastic materials such as polymer matrix composites. A more appropriate criterion based upon nonequilibrium thermodynamics and involving a power balance rather than an energy balance is proposed. This crierion is based upon a reformulation of the second law of thermodynamics which focuses attention on the total Legendre transform of energy expressed as a functional over time and space. This excess energy functional can be shown to be equivalent to the Rice J integral if the only irreversible process is the propogation of a single crack completely through the thickness of the specimen and if the crack propogation is assured to be independent of time. For the more general case of more than one crack in a viscoelastic medium integration over both time and space is required. Two experimentally measurable parameters are proposed which should permit the evaluation of this more general fracture criterion.

Lindenmeyer, P. H.↗

NASA NTRS1990

Formulation and validation of high-order linearized models of helicopter flight mechanics

A high-order linearized model of helicopter flight dynamics is extracted from a nonlinear time domain simulation. The model has 29 states that describe the fuselage rigid body degrees of freedom, the flap and lag dynamics in a nonrotating coordinate system, the inflow dynamics, the delayed entry of the horizontal tail into the main rotor wake, and, approximately, the blade torsion dynamics. The nonlinear simulation is obtained by extensively modifying the GENHEL computer program. The results indicate that the agreement between the linearized and the nonlinear model is good for small perturbations, and deteriorates for large amplitude maneuvers.

Kim, Frederick D.↗

NASA NTRS1999

Analysis of Composite Panels Subjected to Thermo-Mechanical Loads

The results of a detailed study of the effect of cutout on the nonlinear response of curved unstiffened panels are presented. The panels are subjected to combined temperature gradient through-the-thickness combined with pressure loading and edge shortening or edge shear. The analysis is based on a first-order, shear deformation, Sanders-Budiansky-type shell theory with the effects of large displacements, moderate rotations, transverse shear deformation, and laminated anisotropic material behavior included. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the panel. The nonlinear displacements, strain energy, principal strains, transverse shear stresses, transverse shear strain energy density, and their hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the nonlinear response to variations in the panel parameters, as well as in the material properties of the individual layers. Numerical results are presented for cylindrical panels and show the effects of variations in the loading and the size of the cutout on the global and local response quantities as well as their sensitivity to changes in the various panel, layer, and micromechanical parameters.

Noor, Ahmed K.↗

DOE OSTI2022

Effect of relative humidity on the nonlinear elastic response of granular media

We study the influence of relative humidity (RH) on the nonlinear elastic response of granular media. Previous work has shown that the nonlinear elastic response of consolidated granular media like rocks likely arises from two distinct mechanisms; however, we do not have a clear understanding of their physical origins at the microscopic scale. Here, we conduct dynamic acousto-elastic testing (DAET) on samples of glass beads under dry (~10%), ambient (~60%), and humid (~100%) conditions at room temperature and a constant static stress of 4 MPa. DAET allows us to retrieve the full nonlinear elastic response, including transient softening and hysteretic effects. We find that the elastic nonlinearity of humid samples is an order of magnitude larger than dry samples. Moreover, we find that all extracted nonlinear parameters increase with RH. This overall increase in nonlinearity is consistent with findings from previous studies and with the hypothesis that water adsorption on the grains makes the contact junctions weaker and prone to greater disturbances when subjected to dynamic stressing. Our results also suggest that, if indeed both mechanisms coexist, they are affected in a similar fashion in these glass bead samples and cannot be distinguished by varying RH.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Dissipative Phase Transition in the Two-Photon Dicke Model

We explore the dissipative phase transition of the two-photon Dicke model, a topic that has garnered significant attention recently. Our analysis reveals that while single-photon loss does not stabilize the intrinsic instability in the model, the inclusion of two-photon loss restores stability, leading to the emergence of superradiant states, which coexist with the normal vacuum states. Using a second-order cumulant expansion for the photons, we derive an analytical description of the system in the thermodynamic limit, which agrees well with the exact calculation results. Additionally, we present the Wigner function for the system, shedding light on the breaking of the 𝑍4 symmetry inherent in the model. These findings offer valuable insights into stabilization mechanisms in open quantum systems and pave the way for exploring complex nonlinear dynamics in two-photon Dicke models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2018

Analysis of the Influence of Layer Shifting on the Elastic Response and Damage Nucleation and Growth in Woven Composite Laminates

The influence of relative layer shifting on the elastic and damage response of plain weave composite laminates is analyzed using a continuum damage mechanics approach in combination with the finite element method. First, the homogenized properties of the woven composite as a function of the number of layers and of layer shifting are presented. Next, the damage development in various shifting configurations is studied using different damage constitutive models for the matrix and the fiber bundles. It is shown that the impact of layer shifting on both the elastic response and the nonlinear damage response is significant. Most notably, the model captures changes in the damage mechanisms within the woven composite that occur due to layer shifting, resulting in stiffer, more brittle behavior, which has been shown experimentally in the literature. Model results in the linear and nonlinear regimes are shown to be consistent with both an independent analytical model and reported experiments.

layer shifting↗

NASA NTRS2000

Simulation of Aluminum Micro-mirrors for Space Applications at Cryogenic Temperatures

Closed form and finite element models are developed to predict the device response of aluminum electrostatic torsion micro-mirrors fabricated on silicon substrate for space applications at operating temperatures of 30K. Initially, closed form expressions for electrostatic pressure arid mechanical restoring torque are used to predict the pull-in and release voltages at room temperature. Subsequently, a detailed mechanical finite element model is developed to predict stresses and vertical beam deflection induced by the electrostatic and thermal loads. An incremental and iterative solution method is used in conjunction with the nonlinear finite element model and closed form electrostatic equations to solve. the coupled electro-thermo-mechanical problem. The simulation results are compared with experimental measurements at room temperature of fabricated micro-mirror devices.

Kuhn, J. L.↗

NASA NTRS2004

Thermal-Structural Optimization of Integrated Cryogenic Propellant Tank Concepts for a Reusable Launch Vehicle

A next generation reusable launch vehicle (RLV) will require thermally efficient and light-weight cryogenic propellant tank structures. Since these tanks will be weight-critical, analytical tools must be developed to aid in sizing the thickness of insulation layers and structural geometry for optimal performance. Finite element method (FEM) models of the tank and insulation layers were created to analyze the thermal performance of the cryogenic insulation layer and thermal protection system (TPS) of the tanks. The thermal conditions of ground-hold and re-entry/soak-through for a typical RLV mission were used in the thermal sizing study. A general-purpose nonlinear FEM analysis code, capable of using temperature and pressure dependent material properties, was used as the thermal analysis code. Mechanical loads from ground handling and proof-pressure testing were used to size the structural geometry of an aluminum cryogenic tank wall. Nonlinear deterministic optimization and reliability optimization techniques were the analytical tools used to size the geometry of the isogrid stiffeners and thickness of the skin. The results from the sizing study indicate that a commercial FEM code can be used for thermal analyses to size the insulation thicknesses where the temperature and pressure were varied. The results from the structural sizing study show that using combined deterministic and reliability optimization techniques can obtain alternate and lighter designs than the designs obtained from deterministic optimization methods alone.

Johnson, Theodore F.↗

DOE OSTI2023

Demonstration of acoustic monitoring for structural health of microreactors: Through use of neural networks and resonant ultrasound spectroscopy

Nuclear microreactors prioritize modularity and portability and are intended to be a cost-effective technology for non-conventional nuclear markets. As such, the development of microreactors into a safe and feasible solution for energy security applications will necessitate the development of non-destructive technologies to monitor the integrity of inaccessible reactors components during operation. This demonstration applies linear and nonlinear acoustic techniques, in combination with machine learning, to detect and classify mechanical changes (stress and damage) in a test article which are broadly representative of potential operating challenges within a functioning microreactor. All necessary data has been collected for this demonstration, with minor experimental issues identified that can be addressed in follow-on work. Motivated by the expected conditions within a functioning microreactor, we have demonstrated our monitoring techniques on a core-block-like test article using an unstructured excitation source that approximates the noisy acoustic environment expected during reactor operation. At all stress states mechanically applied to the test article, a machine learning model using an artificial neural network was able to classify with 100% accuracy whether a 3D laser vibrometry point measurement was made on an intact or artificially defective test article. Further, model predictions about whether the defect interface was rough or smooth were 95% accurate, indicating the ability of acoustic techniques to recover defect characteristics. Resonant ultrasound spectroscopy (RUS) was also applied to the dataset to provide further quantitative insights about material properties. RUS analysis was ultimately hampered by several minor experimental and data issues, limiting results to certain cases for this demonstration. Last, analysis using nonlinear RUS exhibited sensitivity to changing levels of applied stresses for each intact and defective state. As presented in this demonstration, acoustic monitoring exhibits sensitivity to stress changes, which are of concern due to high thermal gradients expected during startup and operation. Further, our techniques distinguish between measurements made on intact and damaged test articles.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1972

Atmospheric Flight Mechanics Conference, 2nd, Palo Alto and Moffett Field, Calif., September 11-13, 1972, Informal Papers.

Limitations in the acquisition of nonlinear aerodynamic coefficients from free-oscillation data by means of the Chapman-Kirk technique, SAM-D control test vehicle trajectory plannning and flight test analysis, and determination of aerodynamic drag from radar data are among the topics covered in papers concerned with atmospheric flight mechanics. Other areas covered include fixed and rotary-wing aircraft, ordnance and reentry vehicles, and analysis and measurement techniques. Individual items are announced in this issue.

Source record↗