Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “next generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The Next Generation Virgo Cluster Survey (NGVS). XXIV. The Red Sequence to ∼10{sup 6}L{sub ⊙} and Comparisons with Galaxy Formation Models

We use deep optical photometry from the Next Generation Virgo Cluster Survey (NGVS) to investigate the color–magnitude diagram for the galaxies inhabiting the core of this cluster. The sensitivity of the NGVS imaging allows us to continuously probe galaxy colors over a factor of ∼2 × 10{sup 5} in luminosity, from brightest cluster galaxies to scales overlapping classical satellites of the Milky Way (M{sub g{sup ′}} ∼ −9; M {sub *} ∼ 10{sup 6} M {sub ⊙}), within a single environment. Remarkably, we find the first evidence that the red sequence (RS) flattens in all colors at the faint-magnitude end (starting between −14 ≤ M{sub g{sup ′}} ≤ −13, around M {sub *} ∼ 4 × 10{sup 7} M {sub ⊙}), with the slope decreasing to ∼60% or less of its value at brighter magnitudes. This could indicate that the stellar populations of faint dwarfs in Virgo’s core share similar characteristics (e.g., constant mean age) over ∼3 mag in luminosity, suggesting that these galaxies were quenched coevally, likely via pre-processing in smaller hosts. We also compare our results to galaxy formation models, finding that the RS in model clusters have slopes at intermediate magnitudes that are too shallow, and in the case of semianalytic models, do not reproduce the flattening seen at both extremes (bright/faint) of the Virgo RS. Deficiencies in the chemical evolution of model galaxies likely contribute to the model-data discrepancies at all masses, while overly efficient quenching may also be a factor at dwarf scales. Deep UV and near-IR photometry are required to unambiguously diagnose the cause of the faint-end flattening.

79 ASTRONOMY AND ASTROPHYSICS↗

Lubricant and seal technologies for the next generation of lunar roving vehicles

In a recent study commissioned by NASA it was determined that tribological failures can be life-limiting in many applications for the next generation of lunar rover vehicles and therefore warrant special consideration. This paper describes the technological issues and key findings of the study. Recommended technology development needs are also presented. Because the suitability of lubricant and seal concepts must be evaluated in the context of a specific application, these technology programs are tied to advanced development of key system components. The mobility subsystem mechanisms on rover vehicles plus selected components of attached tools were determined to be essential elements which warrant advanced development in order to enhance reliability and decrease maintenance requirements. Accurate assessments of EVA, logistic support, and spare parts requirements cannot be accomplished until the advanced development programs near completion.

Ramsey, Paul S.↗

Selection of the Ground Segment for the Next Generation Space Telescope (NGST) Flight Demonstrator (Nexus)

Nexus was a technology demonstrator project that was designed to bridge from the Hubble Space Telescope (HST) to its successor, the Next Generation Space Telescope (NGST). This paper focuses on the process used in designing the ground segment for Nexus and the lessons learned in its development. Ground station cost drivers were: (1) Contact time, (2) Cost of transporting data between the ground stations and control center, and (3) Cost savings via ground automation. We found that reducing the communication requirement in just the first 100 days could have reduced the total ground station cost by 40%. Contact time cost dwarfed the cost trade between automation development and off-shift operations personnel. Real-time Telemetry and Control (T&C) system analysis was divided into: (1) Potential reuse of the Nexus real-time (T&C) system for NGST, (2) Feasibility of using a 'Finite State-Based Modeling' product, and (3) Selecting a Commercial Off the Shelf (COTS) versus Government Off The Shelf (GOTS) products. We found that each of the products evaluated in detail (ASIST, EPOCH 2000, and ITOS) could adequately support basic mission requirements. Lessons learned were: (1) Include operations at the beginning of the mission, and (2) Develop an operations concept as soon as possible.

Gal-Edd, Jonathan↗

Next Generation GPS Ground Control Segment (OCX) Navigation Design

In February 2010, a Raytheon-led team was selected by The Air Force to develop, implement, and operate the next generation GPS ground control segment (OCX). To meet and exceed the demanding OCX navigation performance requirements, the Raytheon team partnered with ITT (Navigation lead) and JPL to adapt major elements of JPL's navigation technology, proven in the operations of the Global Differential GPS (GDGPS) System. Key design goals for the navigation subsystem include accurate ephemeris and clock accuracy (user range error), ease of model upgrades, and a smooth and safe transition from the legacy system to OCX.We will describe key elements of the innovative architecture of the OCX navigation subsystem,and demonstrate the anticipated performance of the system through high fidelity simulations withactual GPS measurements.

Bertiger, Willy↗

Development of the Next-Generation Caustic-Side Solvent Extraction (NG-CSSX) Process for Cesium Removal from High-Level Tank Waste

This paper describes the chemical performance of the Next-Generation Caustic-Side Solvent Extraction (NG-CSSX) process in its current state of development for removal of cesium from the alkaline high-level tank wastes at the Savannah River Site (SRS) in the US Department of Energy (USDOE) complex. Overall, motivation for seeking a major enhancement in performance for the currently deployed CSSX process stems from needs for accelerating the cleanup schedule and reducing the cost of salt-waste disposition. The primary target of the NG-CSSX development campaign in the past year has been to formulate a solvent system and to design a corresponding flowsheet that boosts the performance of the SRS Modular CSSX Unit (MCU) from a current minimum decontamination factor of 12 to 40,000. The chemical approach entails use of a more soluble calixarene-crown ether, called MaxCalix, allowing the attainment of much higher cesium distribution ratios (DCs) on extraction. Concurrently decreasing the Cs-7SB modifier concentration is anticipated to promote better hydraulics. A new stripping chemistry has been devised using a vitrification-friendly aqueous boric acid strip solution and a guanidine suppressor in the solvent, resulting in sharply decreased DCs on stripping. Results are reported herein on solvent phase behavior and batch Cs distribution for waste simulants and real waste together with a preliminary flowsheet applicable for implementation in the MCU. The new solvent will enable MCU to process a much wider range of salt feeds and thereby extend its service lifetime beyond its design life of three years. Other potential benefits of NG-CSSX include increased throughput of the SRS Salt Waste Processing Facility (SWPF), currently under construction, and an alternative modular near-tank application at Hanford.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Completeness map evaluation demonstrated with candidate next-generation cardiac CT architectures

Purpose: In this report, the authors introduce the general concept of the completeness map, as a means to evaluate the completeness of data acquired by a given CT system design (architecture and scan mode). They illustrate the utility of completeness map by applying the completeness map concept to a number of candidate CT system designs, as part of a study to advance the state-of-the-art in cardiac CT. Methods: In order to optimally reconstruct a point within a volume of interest (VOI), the Radon transform on all possible planes through that point should be measured. The authors quantified the extent to which this ideal condition is satisfied for the entire image volume. They first determined a Radon completeness number for each point in the VOI, as the percentage of possible planes that is actually measured. A completeness map is then defined as a 3D matrix of the completeness numbers for the entire VOI. The authors proposed algorithms to analyze the projection datasets in Radon space and compute the completeness number for a fixed point and apply these algorithms to various architectures and scan modes that they are evaluating. In this report, the authors consider four selected candidate architectures, operating with different scan modes, for a total of five system design alternatives. Each of these alternatives is evaluated using completeness map. Results: If the detector size and cone angle are large enough to cover the entire cardiac VOI, a single-source circular scan can have {>=}99% completeness over the entire VOI. However, only the central z-slice can be exactly reconstructed, which corresponds to 100% completeness. For a typical single-source architecture, if the detector is limited to an axial dimension of 40 mm, a helical scan needs about five rotations to form an exact reconstruction region covering the cardiac VOI, while a triple-source helical scan only requires two rotations, leading to a 2.5x improvement in temporal resolution. If the source and detector of an inverse-geometry (IGCT) system have the same axial extent, and the spacing of source points in the axial and transaxial directions is sufficiently small, the IGCT can also form an exact reconstruction region for the cardiac VOI. If the VOI can be covered by the x-ray beam in any view, a composite-circling scan can generate an exact reconstruction region covering the VOI. Conclusions: The completeness map evaluation provides useful information for selecting the next-generation cardiac CT system design. The proposed completeness map method provides a practical tool for analyzing complex scanning trajectories, where the theoretical image quality for some complex system designs is impossible to predict, without yet-undeveloped reconstruction algorithms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Next Generation RivGen Power System: Kvichak River, AK Overwinter Ice Study

The University of Alaska Fairbanks (UAF) Alaska Hydrokinetic Energy Research Center was tasked with developing a real-time data telemetry / remote power generation system to monitor frazil ice conditions in the Kvichak River in support of the U.S. Department of Energy funded "Next Generation MHK River Power System Optimized for Performance, Durability and Survivability" project. A real-time telemetry system was requested because of the short time span between the end of the frazil ice season when the instruments would be recovered, limited vessel availability and the project end-date. To meet the project objectives, UAF designed and assembled a remote power/real-time data telemetry system that included an auto start propane generator, a small PV array, a small battery bank and line-of-sight radios as well as two sonar systems to monitor river velocity and water column acoustic backscatter strength. Both sonars included internal batteries for powering the instruments in case of failure of the shore based power system. The sonars, deployed in ~5 m of water on the bed of the Kvichak River, adjacent to the Village of Igiugig, Alaska were tethered to shore via a waterproof armored cable that conveyed power to the subsurface instruments and data from the instruments to the shore based telemetry system. The instruments were programmed to record data internally as well as to transmit data serially over the cables to the shore based system. The system was in-place between November, 2016 and June, 2017. While the real-time data telemetry system was not successful and the remote power generation power system was only partially successful, the system design included sufficient redundant power in the form of internal instrument batteries to enable the collection of nearly three months of overlapping velocity and backscatter data (from November through February) and a record of acoustic backscatter strength spanning the entire ~150 day frazil ice season between November, 2016 and ~April, 2017. This submission includes the overwinter ice study plan, raw data, and report.

16 TIDAL AND WAVE POWER↗

Microstructural Characterization of Next Generation Nuclear Graphites

This article reports the microstructural characteristics of various petroleum and pitch based nuclear graphites (IG-110, NBG-18, and PCEA) that are of interest to the next generation nuclear plant program. Bright-field transmission electron microscopy imaging was used to identify and understand the different features constituting the microstructure of nuclear graphite such as the filler particles, microcracks, binder phase, rosette-shaped quinoline insoluble (QI) particles, chaotic structures, and turbostratic graphite phase. The dimensions of microcracks were found to vary from a few nanometers to tens of microns. Furthermore, the microcracks were found to be filled with amorphous carbon of unknown origin. The pitch coke based graphite (NBG-18) was found to contain higher concentration of binder phase constituting QI particles as well as chaotic structures. The turbostratic graphite, present in all of the grades, was identified through their elliptical diffraction patterns. The difference in the microstructure has been analyzed in view of their processing conditions.

01 COAL, LIGNITE, AND PEAT↗

Bridging Atomic Solvation Environment with Electrochemical Properties for the Bis(trifluoromethylsulfonyl)imide-Based Divalent Cation Electrolytes for the Next-Generation Energy Storage Systems

A deep molecular-level understanding of the multivalent electrolyte and its correlation with the electrochemical properties is crucial for designing optimized electrolytes for next-generation rechargeable batteries. Comprehensive knowledge of the atomic level of the solvation structure and its connection with electrochemical stability and ion transport properties is especially critical. However, the interaction of these three components coupled with clear atomistic insights is lacking in the literature. Here, our current contribution evaluates representative electrolytes with the bis(trifluoromethanesulfonyl)imide (TFSI) anions for multivalent cations of Mg, Ca, and Zn, at different ionic conditions with and without a cosolvated environment in ether-based solvent. Two critical problems are investigated: first, resolving the solvation structures in the electrolyte solutions as a function of concentrations through pair distribution function analysis and the corresponding electrochemical transport properties; second, unmasking the quantitative correlation of the atomistic environment with both electrochemical kinetics and cation dependence. We discovered that the magnesium- and calcium-based electrolytes display versatile coordination lengths but poor average anodic stability due to ion pairing with TFSI - . On the contrary, the zinc-based electrolytes show the shortest solvent coordination lengths, shielding the Zn cation from rigid solvent interactions and resulting in the highest anodic stabilities. Calcium-based electrolytes exhibit the longest and most concentration-independent coordination lengths. This work provides valuable insights into the molecular structural and electrochemical features of diverse multivalent electrolyte systems with cations in various solvation environments, emphasizing the importance of the solvation structure and construction in designing high-performance electrolytes.

cation coordination↗

Sample Results from the Next Generation Solvent Program Real Waste Extraction-Scrub-Strip Testing

Savannah River National Laboratory (SRNL) performed multiple Extraction-Scrub-Strip (ESS) testing using real waste solutions, and three Next Generation Solvent (NGS) variations, which included radiologically clean pure NGS, a blend of radiologically clean NGS and radiologically clean BOBCalixC6 (NGS-MCU), and a blend of radiologically clean NGS and radiologically contaminated BOBCalixC6 from the MCU Solvent system. The results from the tests indicate that both the NGS and the NGS-MCU blend exhibit adequate extraction, scrub and strip behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sample Results from the Next Generation Solvent Program Real Waste Extraction-Scrub-Strip Testing

Savannah River National Laboratory (SRNL) performed multiple Extraction-Scrub-Strip (ESS) testing using real waste solutions, and three Next Generation Solvent (NGS) variations, which included radiologically clean pure NGS, a blend of radiologically clean NGS and radiologically clean BOBCalixC6 (NGS-MCU), and a blend of radiologically clean NGS and radiologically contaminated BOBCalixC6 from the MCU Solvent system. The results from the tests indicate that both the NGS and the NGS-MCU blend exhibit adequate extraction, scrub and strip behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Results From The Salt Disposition Project Next Generation Solvent Demonstration Plan

Strip Effluent Hold Tank (SEHT), Decontaminated Salt Solution Hold Tank (DSSHT), Caustic Wash Tank (CWT) and Solvent Hold Tank (SHT) samples were taken throughout the Next Generation Solvent (NGS) Demonstration Plan. These samples were analyzed and the results are reported. SHT: The solvent behaved as expected, with no bulk changes in the composition over time, with the exception of the TOA and TiDG. The TiDG depletion is higher than expected, and consideration must be taken on the required rate of replenishment. Monthly sampling of the SHT is warranted. If possible, additional SHT samples for TiDG analysis (only) would help SRNL refine the TiDG degradation model. CWT: The CWT samples show the expected behavior in terms of bulk chemistry. The 137Cs deposited into the CWT varies somewhat, but generally appears to be lower than during operations with the BOBCalix solvent. While a few minor organic components were noted to be present in the Preliminary sample, at this time these are thought to be artifacts of the sample preparation or may be due to the preceding solvent superwash. DSSHT: The DSSHT samples show the predicted bulk chemistry, although they point towards significant dilution at the front end of the Demonstration. The 137Cs levels in the DSSHT are much lower than during the BOBCalix operations, which is the expected observation. SEHT: The SEHT samples represent the most different output of all four of the outputs from MCU. While the bulk chemistry is as expected, something is causing the pH of the SEHT to be higher than what would be predicted from a pure stream of 0.01 M boric acid. There are several possible different reasons for this, and SRNL is in the process of investigating. Other than the pH issue, the SEHT is as predicted. In summary, the NGS Demonstration Plan samples indicate that the MCU system, with the Blend Solvent, is operating as expected. The only issue of concern regards the pH of the SEHT, and SRNL is in the process of investigating this. SRNL results support the transition to routine operations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Next Generation Anodes for Lithium-Ion Batteries: Thermodynamic Understanding and Abuse Performance

The objectives of this report are as follows: elucidate degradation mechanisms, decomposition products, and abuse response for next generation silicon based anodes; and Understand the contribution of various materials properties and cell build parameters towards thermal runaway enthalpies. Quantify the contributions from particle size, composition, state of charge (SOC), electrolyte to active materials ratio, etc.

25 ENERGY STORAGE↗

Beyond the Lambertian limit: Novel low-symmetry gratings for ultimate light trapping enhancement in next-generation photovoltaics

This project aims at addressing the efficiency limit and high fabrication cost of current light trapping methods by developing novel low-symmetry gratings (LSG) for next-generation thin c-Si photovoltaic (PV) cells. The LSG design achieves light trapping enhancement exceeding the 4n 2 Lambertian limit and can be fabricated over large areas using low-cost, single-step nanoimprint techniques. We further explored the use of deposited high-refractive-index glass materials for low-temperature LSG processing, which enables direct imprint sculpting of even complex grating geometries in glass without requiring an additional pattern transfer step, which minimizes processing cost and surface damage to PV cells. In the project, we have demonstrated fabrication and integration of sub-wavelength LSG with thin c-Si wafers and bifacial solar cells with low defect density. Optical absorption measurements indicate that LSGs demonstrated superior absorption enhancement compared to their traditional symmetric counterparts as predicted by our simulations. Efficiency enhancement was observed in solar cells integrated with LSGs although fabrication yield of the LSG-integrated cells remains a challenge

14 SOLAR ENERGY↗

Electroformed Nickel Mirrors for the Next Generation Space Telescope

This paper summarizes the work to date on a novel mirror fabrication technique being developed at the Marshall Space Flight Center for potential use on the Next Generation Space Telescope (NGST). This technique involves forming an extremely lightweight mirror by electroplating nickel and nickel based alloys onto a highly polished precision mandrel. The resulting mirror shell can then be backed up with or attached to a lightweight structure to produce a mirror element that is on the order of 15 kg/sq m areal density. Since the mirrors are fabricated from a mandrel (or master), subsequent mirrors can be made with very high economy; this technique is particularly suited to segmented mirrors schemes whereby large apertures are achieved through the deployment of smaller segments. Control of the electroplating process is the key element for producing high quality optics; bath chemistry and real time control of the plating current density yields uniform grained electroforms with zero residual stress. To accomplish this, a special electronic sensor was developed whereby the residual stress can be monitored as the nickel is electrolytically deposited. This information is used in a feedback loop to modulate current density which, in turn, directly governs the residual stress. Details pertaining to this and other aspects of the fabrication of a half meter mirror will be published along with test results and metrology data.

Redmon, John W.↗

Formal Verification for a Next-Generation Space Shuttle

This paper discusses the verification and validation (V&2) of advanced software used for integrated vehicle health monitoring (IVHM), in the context of NASA's next-generation space shuttle. We survey the current VBCV practice and standards used in selected NASA projects, review applicable formal verification techniques, and discuss their integration info existing development practice and standards. We also describe two verification tools, JMPL2SMV and Livingstone PathFinder, that can be used to thoroughly verify diagnosis applications that use model-based reasoning, such as the Livingstone system.

Nelson, Stacy D.↗

Next Generation Spacecraft, Crew Exploration Vehicle

This special bibliography includes research on reusable launch vehicles, aerospace planes, shuttle replacement, crew/cargo transfer vehicle, related X-craft, orbital space plane, and next generation launch technology.

Source record↗

NASA SPLICE Project: Developing the Next Generation Hazard Detection System

The SPLICE project is continuing NASA's efforts to develop precision landing GN&C technologies for future lander missions. One of those technologies is the next generation Hazard Detection System (HDS), which consists of a new Hazard Detection LIDAR and Hazard Detection Algorithms. The HDS is a modular system that will be adapted to fit specific mission needs in the future. This abstract presents the design approach and current challenges for the SPLICE HDS.

Restrepo, Carolina↗