Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nevada”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Remote sensing applications to hydrologic modeling in the southern Sierra Nevada and portions of the San Joaquin Valley, volume 1

The author has identified the following significant results. Characteristics of LANDSAT MSS imagery present problems in using satellite radiation measurements to estimate the shortwave albedo of an alpine snow cover. Every 15 minute USGS quadrangle contains over 100,000 pixels which poses a computation problem if each pixel is to be evaluated individually. The sampling interval may be sufficiently great to mask some effects of terrain and vegetation on reflectance. Three frames of LANDSAT imagery are needed for complete coverage of the study area, yet less than one third of the area coverage from each frame covers an area of interest. Because of distortions inherent in the imagery, information regarding spacecraft altitude, attitude, and position must be statistically derived with respect to ground control points in the image whose geodetic locations are known. An inspection of shade points indicates that up to one third of the most heavily snow covered areas may saturate in bands 4 through 6. LANDSAT's 9 day repeat cycle is not optimum for snow cover reflectance modeling because the most pronounced changes in albedo occur most nearly following a new snowfall. Such a snowfall, occurring between overpasses, is inadequately represented by extrapolation from the previous overpasses.

Dozier, J.↗

Detection and mapping of hydrothermally altered rocks in the vicinity of the comstock lode, Virginia Range, Nevada, using enhanced LANDSAT images

The author has identified the following significant results. LANDSAT images enhanced by the band-ratioing method can be used for reconnaissance alteration mapping in moderately heavily vegetated semiarid terrain as well as in sparsely vegetated to semiarid terrain where the technique was originally developed. Significant vegetation cover in a scene, however, requires the use of MSS ratios 4/5, 4/6, and 6/7 rather than 4/5, 5/6, and 6/7, and requires careful interpretation of the results. Supplemental information suitable to vegetation identification and cover estimates, such as standard LANDSAT false-color composites and low altitude aerial photographs of selected areas is desirable.

Ashley, R. P.↗

Discrimination of hydrothermally altered rocks along the Battle Mountain-Eureka, Nevada mineral belt using LANDSAT images

The author has identified the following significant results. Limonitic alteration halos associated with two copper prophyry deposits were successfully mapped at Battle Mountain. Alteration halos from both a hypogene system at Copper Canyon and a supergene system at Copper Basin are recognizable in the composite. Both copper porphyry deposits are located in sedimentary rock units that commonly have ferruginous coatings; yet, in most cases, the hydrothermally derived limonite was distinguishable in the CRC from sedimentary limonite. Large format playback images with pixel sizes from 200 to 400 micron m provided details of spatial resolution and color separation unachievable on enlargements from 70 mm film chips. Details of the alteration halos could be resolved only in the large format images. Two aspects of the alteration halos of the porphyry copper deposits were not mapped on the CRC. The optimum CRC image for the area studied consists of MSS 4/5 as blue, MSS 4/6 as yellow, and MSS 6/7 as magenta using diazo films. The disseminated gold deposits at Gold Acres are not depicted in the CRC image.

Krohn, M. D.↗

Preliminary results of penetrator field test program, Tonopah, Nevada, 16-28 April 1979

Subscale (0.63 scale) penetrators impacted various sizes of volcanic rocks resting on and within compacted plays sediments. All penetrators were identical in size, shape, weight, and impact velocity. Although minor variations in impact angle were documented, the final orientation of the buried penetrators was primarily a consequence of the size, shape, and depth of the rocks encountered during impact. In situ measurements of impacted penetrators revealed that surface and buried layers of rocks having diameters up to 3 times the penetrator diameter caused only small ( 10 deg) angles of deflection. Only large single rocks greater than 10 times the penetrator diameter caused deflections appreciably greater than 10 deg. The large deflection angles followed by the penetrator were strongly influenced by fracture planes that developed in the rock as it broke apart. No catastrophic failure of the penetrator occurred during these tests. A cross section of the path of each penetrator through the ground is shown together with details on orientation before, during, and after the tests. Comparisons are made with results of previous subscale penetrator tests, and conclusions are drawn with respect to full-scale Mars penetrator performance.

Blanchard, M. B.↗

Application of snowcovered area to runoff forecasting in selected basins of the Sierra Nevada, California

The author has identified the following significant results. Direct overlay onto 1:1,000,000 prints takes about one third the time of 1:500,000 zone transfer scope analysis using transparencies, but the consistency of the transparencies reduce the time for data analysis. LANDSAT data received on transparencies is better and more easily interpreted than the near real-time data from Quick Look, or imagery from other sources such as NOAA. The greatest potential for water supply forecasting is probably in improving forecast accuracy and in expanding forecast services during the period of snowmelt. Problems of transient snow line and uncertainties in future weather are the main reasons that snow cover area appears to offer little in water supply forecast accuracy improvement during the peroid snowpack accumulation.

Brown, A. J.↗

Genesis of the Smartville arc-ophiolite, Sierra Nevada foothills, California

Rare earth element analyses of metavolcanic rocks from the Smartville, Calif. ophiolite divide the uniform suite of pillowed and massive lavas into the lower part consisting of massive, brecciated tholeiites, an intrusive dike-sill complex, and part of a plutonic suite. The tholeiites are light REE depleted with a (Ce)N range of 6.5 to 26.0 and (Yb)N of 6.0 to 30.0; it is suggested that the tholeiites were produced by partial melting of a LREE depleted source similar to MORB. The upper part of the volcanic pile is comprised of basaltic-andesitic flows and interbedded coarse to fine volcanic sediments; these 'calc-alkaline' rocks are light REE enriched with the (Ce)N range of 17.0-28.0 and (Yb)N of 8.0 to 12.0. Finally, petrographic investigations of volcanic sediments and sulfide ore deposits in the lava show that the ophiolite formed near a group of active submarine and subareal volcanoes.

Menzies, M.↗

NASA technology transfer in the southwest states - Arizona, Colorado, Nevada and Utah

Features of the NASA Regional Application Program for providing state and local land management agencies an opportunity to assess the usefulness of emerging remote sensing technology are described. The Program guidelines necessitated configuring software for local facilities, assuring that the aggncy involved furnished manpower, and applying the technology to local needs. The study focused on the southwestern U.S., particularly for purposes of water management, federal/state ownership/policy, energy development, environmental impact issues, timber and range inventory, fire control, and urban expansion. Demonstration projects were conducted in various topics, according to the state surveyed, with the success of the projects determined by the willingness of the agencies to continue with the technology, which happened in several cases.

Norman, S. D.↗

Mineralogical Mapping in the Cuprite Mining District, Nevada

The airborne imaging spectrometer (AIS) has provided for the first time, the possibility to map mineralogical constituents in the Earth's surface and thus has enormously increased the value of remote-sensing data as a tool in the solution of geologic problems. The question addressed with AIS at Cuprite was how well could the mineral components at the surface of a hydrothermal alteration zone be detected, identified and mapped? The question was answered positively and is discussed. A relatively rare mineral, buddingtonie, that could not have been detected by conventional means, was discovered and mapped by the use of AIS.

Goetz, A. F. H.↗

Field Utilization and Analysis of AIS 128-channel Imagery Using Microcomputers: Application to Yerington, Nevada Field Area

Geologists in exploration need to be able to determine the mineral composition of a given outcrop, and then proceed to another in order to carry out the process of geologic mapping. Since April 1984 researchers have been developing a portable microcomputer-based imaging system (with a grey-scale of 16 shades of amber), which were demonstrated during the November 1984 GSA field trip in the field at Yerington, NV. A color-version of the same technology was recently demonstrated. The portable computer selected is a COLBY 10-Megabyte, hard disk-equipped repackaged-IBM/XT, which operates on either 110/220 VAC or on 12VDC from the cigarette lighter in a field vehicle. A COMPAQ PLUS or an IBM Portable will also work on modified software. The underlying concept is that the atmospheric transmission and surface albedo/slope terms are multiplicative, relating the spectral irradiance to the spectral color of the surface materials. Thus, the spectral color of a pixel remains after averaged log-albedo and log-irradiance have been estimated. All these steps can be carried out on the COLBY microcomputer, using 80 image lines of the 128-channel, 12-bit imagery. Results are shown for such an 80-line segment, showing the identification of an O-H bearing mineral group (of slightly varying specific characters) on the flight line.

Lyon, R. J. P.↗

Interpretation of AIS Images of Cuprite, Nevada Using Constraints of Spectral Mixtures

A technique is outlined that tests the hypothesis Airborne Imaging Spectrometer (AIS) image spectra are produced by mixtures of surface materials. This technique allows separation of AIS images into concentration images of spectral endmembers (e.g., surface materials causing spectral variation). Using a spectral reference library it was possible to uniquely identify these spectral endmembers with respect to the reference library and to calibrate the AIS images.

Smith, M. O.↗

Comparison of the 1984 and 1985 AIS data over the Singatse Range (Yerington), Nevada

The Singatse Range is composed of a series of 53 types of volcanic, plutonic, metamorphic, and sedimentary rocks. In addition the Jurassic plutonic rocks are also of economic interest for their copper mineralization which is contained in a porphyry dike swarm. The 1984 and 1985 flight results from the Airborne Imaging Spectrometer (AIS) instrument flown in the NASA/JPL C-130 aircraft are contrasted and compared. The 1984 data are less noisy than the 1985, in which many sets of vertical stripings from bad detectors can be seen. Significantly however, enough of the hydrothermal alteration patterns can be seen in each line at the mutual crossing points that one can say that the specific targets were detected in both year's flights. The spectra of both years are corrupted by the second-order effect from the grating, but 0-H bond absorption at essentially correct wavelengths for sericite and/or kaolinite can be seen.

Lyon, R. J. P.↗

Detection and mapping of volcanic rock assemblages and associated hydrothermal alteration with Thermal Infrared Multiband Scanner (TIMS) data Comstock Lode Mining District, Virginia City, Nevada

Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the Virginia City area on September 12, 1984. The data were acquired at approximately 1130 hours local time (1723 IRIG). The TIMS data were analyzed using both photointerpretation and digital processing techniques. Karhuen-Loeve transformations were utilized to display variations in radiant spectral emittance. The TIMS image data were compared with color infrared metric camera photography, LANDSAT Thematic Mapper (TM) data, and key areas were photographed in the field.

Taranik, James V.↗

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain and Kane Springs wash volcanic centers, southern Nevada

Mineral coatings, including desert varnish on volcanic rocks of the semi-arid Basin and Range province are composted of amorphous, translucent films of Fe, Mn, Si, and Al rich compounds. Coatings are chiefly thin films that impregnate intergranularly to depths of about 0.1 to 0.3 mm, rarely deeper. Sixteen coating sections and subsurface interiors were probed by SEM; 20 samples were scanned by infrated spectrometry; 10 samples were scanned for visible-near IR spectra; inductin coupling plasma analyses were collected on 34 samples; 2 desert varnish surgaces were investigated by optical density slice imagery; a few XRD analyses were conducted in addition to the 50 reported in the last period; thin section observation continued; and imagery processing focused on classification techniques. In late May, approximately 10 field days were spent at the Stonewall and Black Mountain study sited conducting more detailed mapping and observation base on imagery results and collecting spectra with the Collins Field Spectrometer. Approximately 100 spectral analyses were collected and are currently being processed.

Taranik, James V.↗

Evaluation of AIS-2 (1986) data over hydrothermally altered granitoid rocks of the Singatse Range (Yerington) Nevada and comparison with 1985 AIS-1 data

The Airborne Imaging Spectrometer-2 (AIS-2) flights along 2 subparallel lines (bearing 013) were designed to traverse 3 major rock assemblages - the Triassic sedimentary sequence; the granitoid rocks of the Yerington batholith and the Tertiary ignimbritic ash flow and ash fall tuffs. The first 2 sites are hydrothermally altered to a quartz-sericite-tourmaline mineralogy. The first AIS-2 data set showed numerous line dropouts and a considerable number of randomly distributed dark pixels. A second decommutation reduced the dropout essentially to near zero and the dark pixels by about 75 percent. Vertical striping was removed by histogram matching, column by column. A log residual spectrum was calculated which showed the departure of a 2 x 2 pixel area from the spatially and spectrally averaged scene. A 1:1 correlation was found with the log residual AIS-2 data and a large open pit area of gypsum. An area with known sericite agreed with the overflight data, and an area known to be free of any significant amount of O-H bearing materials showed no evidence of any in the AIS-2 log residuals.

Lyon, R. J. P.↗

Mapping hydrothermally altered rocks in the Northern Grapevine Mountains, Nevada and California with the airborne imaging spectrometer

Seven flightlines of Airborne Imaging Spectrometer (AIS) data were analyzed for an area of hydrothermally altered rocks. The data were reduced to reflectance relative to an average spectrum, and an automated procedure was used to produce a color coded image displaying absorption band information. Individual spectra were extracted from the AIS images to determine the detailed mineralogy. Two alteration types were mapped based upon mineralogy identified using the AIS data. The primary alteration type is quartz sericite pyrite alteration which occurs in northwest-trending zones in quartz monzonite porphyry. The AIS data allow identification of sericite (muscovite) based upon a strong absorption feature near 2.21 micron and weaker absorption features near 2.35 and 2.45 micron. The second alteration type occurs as a zone of argillic alteration associated with a granitic intrusion. Montmorillonite was identified based on a weak to moderate absorption feature near 2.2 micron and the absence of the two absorption features at longer wavelengths characteristic of sericite. Montmorillonite could be identified only where concentrations of sericite did not mask the montmorillonite spectrum.

Kruse, Fred A.↗