Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutral beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

The Impact of Return-Current Losses on the Observed Emissions from Solar Flares

Electrons accelerated in solar flares are expected to drive a co-spatial return current in the ambient plasma when they escape the acceleration region. This return current maintains plasma neutrality and the stability of the beam of streaming electrons. The electric field that drives this return current also decelerates the energetic electrons in the beam. The corresponding energy loss experienced by the accelerated electrons can affect the observed properties of the X-ray and radio emissions from flares and the evolution of the thermal flare plasma. I will discuss the properties of the flare emissions expected in a classical, steady-state model. As part of this discussion, I will examine Gordon Emslie's 1980 conjecture that return-current losses result in a maximum brightness for the hard X-ray emission from flares.

Holman, Gordon D.↗
NASA NTRS2016

Post-Test Inspection of NASA's Evolutionary Xenon Thruster Long-Duration Test Hardware: Discharge and Neutralizer Cathodes

The NEXT Long-Duration Test is part of a comprehensive thruster service life assessment intended to demonstrate overall throughput capability, validate service life models, quantify wear rates as a function of time and operating condition, and identify any unknown life-limiting mechanisms. The test was voluntarily terminated in February 2014 after demonstrating 51,184 hours of high-voltage operation, 918 kg of propellant throughput, and 35.5 MN-s of total impulse. The post-test inspection of the thruster hardware began shortly afterwards with a combination of non-destructive and destructive analysis techniques, and is presently nearing completion. This paper presents relevant results of the post-test inspection for both discharge and neutralizer cathodes. Discharge keeper erosion was found to be significantly reduced from what was observed in the NEXT 2 kh wear test and NSTAR Extended Life Test, providing adequate protection of vital cathode components throughout the test with ample lifetime remaining. The area of the discharge cathode orifice plate that was exposed by the keeper orifice exhibited net erosion, leading to cathode plate material building up in the cathode-keeper gap and causing a thermally-induced electrical short observed during the test. Significant erosion of the neutralizer cathode orifice was also found and is believed to be the root cause of an observed loss in flow margin. Deposition within the neutralizer keeper orifice as well as on the downstream surface was thicker than expected, potentially resulting in a facility-induced impact on the measured flow margin from plume mode. Neutralizer keeper wall erosion on the beam side was found to be significantly lower compared to the NEXT 2 kh wear test, likely due to the reduction in beam extraction diameter of the ion optics that resulted in decreased ion impingement. Results from the post-test inspection have led to some minor thruster design improvements.

Electric Propulsion↗
NASA NTRS2021

Post-test Inspection of NASA’s Evolutionary Xenon Thruster Long-Duration Test Hardware: Discharge and Neutralizer Cathodes

The NEXT Long-Duration Test is part of a comprehensive thruster service life assessment intended to demonstrate overall throughput capability, validate service life models, quantify wear rates as a function of time and operating condition, and identify any unknown life-limiting mechanisms. The test was voluntarily terminated in February 2014 after demonstrating 51,184 h of high-voltage operation, 918 kg of propellant throughput, and 35.5 MN-s of total impulse. The post-test inspection of the thruster hardware began shortly afterwards with a combination of non-destructive and destructive analysis techniques, and is presently nearing completion. This paper presents relevant results of the post-test inspection for both discharge and neutralizer cathodes. Discharge keeper erosion was found to be significantly reduced from what was observed in the NEXT 2 kh wear test and NSTAR Extended Life Test, providing adequate protection of vital cathode components throughout the test with ample lifetime remaining. The area of the discharge cathode orifice plate that was exposed by the keeper orifice exhibited net erosion, leading to cathode plate material building up in the cathode-keeper gap and causing a thermally-induced electrical short observed during the test. Significant erosion of the neutralizer cathode orifice was also found and is believed to be the root cause of an observed loss in flow margin. Deposition within the neutralizer keeper orifice as well as on the downstream surface was thicker than expected, potentially resulting in a facility-induced impact on the measured flow margin from plume mode. Neutralizer keeper wall erosion on the beam side was found to be significantly lower compared to the NEXT 2 kh wear test, likely due to the reduction in beam extraction diameter of the ion optics that resulted in decreased ion impingement. Results from the post-test inspection have led to some minor thruster design improvements.

Ion engine↗
DOE OSTI2026

NOvA's Current and Future Sterile Neutrino Searches

The NOvA experiment's most recent search for eV-scale sterile neutrinos under a 3+1 model simultaneously analyses muon neutrino and neutral current datasets from the NuMI beam at its Near ($\sim$\qty1{km} baseline) and Far (\qty{810}{km} baseline) detectors to look for oscillations consistent with a sterile neutrino. The analysis is systematically limited in the region of parameter space where $Δm^2_{41} \gtrsim 1~\mathrm{eV}^2$. This region of parameter space is preferred by sterile neutrino interpretations of current experimental anomalies and so improving sensitivity here is high-priority. These proceedings present our current search strategy, and discusses future plans to include data from a second beamline, the Booster Neutrino Beam, to improve our sensitivity in systematics-dominated regions of parameter space.

Lister, Adam [Wisconsin U., Madison; Virginia Tech↗
DOE OSTI2021

Magnetic Field Amplification by a Nonlinear Electron Streaming Instability

Magnetic field amplification by relativistic streaming plasma instabilities is central to a wide variety of high-energy astrophysical environments as well as to laboratory scenarios associated with intense lasers and electron beams. We report on a new secondary nonlinear instability which arises for relativistic dilute electron beams after the saturation of the linear Weibel instability. This instability grows due to the transverse magnetic pressure associated with the beam current filaments, which cannot be quickly neutralized due to the inertia of background ions. We show that it can amplify the magnetic field strength and spatial scale by orders of magnitude, leading to large-scale plasma cavities with strong magnetic field and to very efficient conversion of the beam kinetic energy into magnetic energy. The instability growth rate, saturation level, and scale length are derived analytically and shown to be in good agreement with fully-kinetic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

I/asterisk/ /6s 4P/ collisional quenching - Application to the IF 491-nm laser

Measurements of the rate constants for quenching of the excited I (6s 4P) states by Ar, Xe, CF39I, UF6, and NF3 are described. Each rate constant is determined by recording the exponential time decay of the excited IF or excited I2 (342 nm) fluorescence in the afterglow of the e-beam-excited plasmas containing Ar, CF3I, NF3, and the desired quenching gas. In addition, further experimental evidence in support of neutral channel formation of excited IF in e-beam-pumped Ar/CF3I/NF3 mixtures is presented. Details of the experimental apparatus and gas handling procedures are given, and the kinetics model developed to interpret the experimental data is described.

Hutchison, S. B.↗
NASA NTRS1978

Wave production in an ultrarelativistic electron-positron plasma

In this paper we calculate the eigenmodes associated with an ultrarelativistic electron-positron beam traversing a low-energy electron-positron plasma under physical conditions that may exist along open magnetic field lines above pulsar polar caps. We assume that both beam and plasma are cold and charge neutral, and that magnetic field strength and particle density decrease as the cube of (1/R). In the superstrong magnetic fields near the stellar surface where cyclotron frequencies exceed plasma frequencies, electrostatic waves and associated transverse low-frequency waves are driven unstable by the two-stream type particle distribution. At larger distances above the stellar surface the slow beam cyclotron wave is driven unstable. At even greater radial distance (approximately when particle energy density exceeds magnetic energy density) both the Ordinary and Alfven modes become unstable. All of these instabilities can lead to generation of radiation. If the particle distribution as generated at the stellar surface, assumed to consist of two streams, is modified only by plasma effects, then electrostatic and associated transverse waves may only be unstable near the stellar surface. The beam cyclotron mode which is driven by a two-stream or an inverted particle distribution may be stable.

Hardee, P. E.↗
NASA NTRS1992

Laboratory astrophysics under the ultraviolet, visible, and gravitational astrophysics research program: Oscillator strengths for ultraviolet atomic transitions

The conditions within astrophysical environments can be derived from observational data on atomic and molecular lines. For instance, the density and temperature of the gas are obtained from relative populations among energy levels. Information on populations comes about only when the correspondence between line strength and abundance is well determined. The conversion from line strength to abundance involves knowledge of meanlives and oscillator strengths. For many ultraviolet atomic transitions, unfortunately, the necessary data are either relatively imprecise or not available. Because of the need for more and better atomic oscillator strengths, our program was initiated. Through beam-foil spectroscopy, meanlives of ultraviolet atomic transitions are studied. In this technique, a nearly isotopically pure ion beam of the desired element is accelerated. The beam passes through a thin carbon foil (2 mg/cu cm), where neutralization, ionization, and excitation take place. The dominant process depends on the energy of the beam. Upon exiting the foil, the decay of excited states is monitored via single-photon-counting techniques. The resulting decay curve yields a meanlife. The oscillator strength is easily obtained from the meanlife when no other decay channels are presented. When other channels are present, additional measurements or theoretical calculations are performed in order to extract an oscillator strength. During the past year, three atomic systems have been studied experimentally and/or theoretically; they are Ar, I, Cl I, and N II. The results for the first two are important for studies of interstellar space, while the work on N II bears on processes occurring in planetary atmospheres.

Federman, Steven R.↗
NASA NTRS1985

Theoretical and Experimental Beam Plasma Physics (TEBPP)

The theoretical and experimental beam plasma physics (TEBPP) consists of a package of five instruments to measure electric and magnetic fields, plasma density and temperature, neutral density, photometric emissions, and energetic particle spectra during firings of the particle injector (SEPAC) electron beam. The package is deployed on a maneuverable boom (or RMS) and is used to measure beam characteristics and induced perturbations in the near field ( 10 m) and mid field (10 m to 100 m) along the electron beam. The TEBPP package will be designed to investigate induced oscillations and induced electromagnetic mode waves, neutral and ion density and temperature effects, and beam characteristics as a function of axial distance.

Roberts, W. T.↗
NASA NTRS1986

Theoretical and Experimental Beam Plasma Physics (TEBPP)

The theoretical and experimental beam plasma physics (TEBPP) consists of a package of five instruments to measure electric and magnetic fields, plasma density and temperature, neutral density, photometric emissions, and energetic particle spectra during firings of the particle injector (SEPAC) electron beam. The package is developed on a maneuverable boom (or RMS) and is used to measure beam characteristics and induced perturbations field ( 10 m) and mid field ( 10 m to 100 m) along the electron beam. The TEBPP package will be designed to investigate induced oscillations and induced electromagnetic mode waves, neutral and ion density and temperature effects, and beam characteristics as a function of axial distance.

Roberts, B.↗
NASA NTRS1975

Dynamic sampling of laser-induced vapor plumes by mass spectrometry

Mass spectrometric techniques and instrumentation for the dynamic sampling of laser-induced vapor clouds during their submillisecond expansion periods are discussed. Illustrations are drawn primarily from the results of pulsed-laser heating of some oxides and graphites; these include comparisons of incident laser beam pulses with the resultant pulses of positive ions and selected neutral species. Observed characteristics of vapor pulses from graphite are shown to correlate with calculated surface temperature response. Dynamic velocity measurements of individual vapor species are described and, from these velocities, vaporization temperatures are derived and compared using four gas dynamic models for vapor expansion into vacuum. Additional measurements indicate that the laser beam may interact directly with the neutral vapors to produce ions.

Lincoln, K. A.↗
DOE OSTI2025

Drift-cyclotron loss-cone instability in 3-D simulations of a sloshing-ion simple mirror

The kinetic stability of collisionless, sloshing beam-ion (45° pitch angle) plasma is studied in a three-dimensional (3-D) simple magnetic mirror, mimicking the Wisconsin high-temperature superconductor axisymmetric mirror experiment. The collisional Fokker–Planck code CQL3D-m provides a slowing-down beam-ion distribution to initialize the kinetic-ion/fluid-electron code Hybrid-VPIC, which then simulates free plasma decay without external heating or fuelling. Over 1 – 10 μs, drift-cyclotron loss-cone (DCLC) modes grow and saturate in amplitude. The DCLC scatters ions to a marginally stable distribution with gas-dynamic rather than classical-mirror confinement. Sloshing ions can trap cool (low-energy) ions in an electrostatic potential well to stabilize DCLC, but DCLC itself does not scatter sloshing beam-ions into the said well. Instead, cool ions must come from external sources such as charge-exchange collisions with a low-density neutral population. Manually adding cool ∼1keV ions improves beam-ion confinement several-fold in Hybrid-VPIC simulations, which qualitatively corroborates prior measurements from real mirror devices with sloshing ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

Erectable beam experiment

The erectable beam applicability to the MAST/STEP experiment is summarized. High manual assembly rates were demonstrated in neutral buoyancy tests and it is suggested that use of an erectable beam would eliminate extension/retraction complexity associated with deployable beams. The erectable beam assembly aid is easily adaptable to general truss configurations and structural appendages could be accommodated with the use of actuators. The ACCESS flight experiment precedes MAST by 2 to 3 years and will provide mature, space proven assembly/disassembly technology on which to base the MAST experiment.

Heard, W. L., Jr.↗
NASA NTRS1981

Phenomena induced by charged particle beams

The injection of energetic particles along the Earth's magnetic field lines is a possible remote sensing method for measuring the electric fields parallel to the magnetic field with good time resolution over the entire magnetic field. Neutralization processes, return-current effects, dynamics of the beams, triggered instabilities, and waves must be investigated before the fundamental question about proper experimental conditions, such as energy, intensity and divergence of the beams, pitch-angle injection, ion species, proper probes and detectors and their location, and rendezvous conditions, can be resolved. An experiment designed to provide a better understanding of these special physical processes and to provide some answers to questions concerning beam injection techniques is described.

Beghin, C.↗
DOE OSTI2024

Light Meson Spectroscopy with GlueX and Beyond

The GlueX experiment at Jefferson Lab was specifically designed for precision studies of the light-meson spectrum. For this purpose, a photon beam with energies up to 12 GeV is directed onto a liquid hydrogen target contained within a hermetic detector with near-complete neutral and charged particle coverage. Linear polarization of the photon beam with a maximum around 9 GeV provides additional information about the production process. In 2018, the experiment completed its first phase, recording data with a total integrated luminosity above 400 pb?1. We highlight a selection of results from this world-leading data set with emphasis on the search for light hybrid mesons. In the mean time, the detector underwent significant upgrades and is currently recording data with an even higher luminosity. The future plans of the GlueX experiment to explore the meson spectrum with unprecedented precision are summarized.

Austregesilo, Alexander↗
NASA NTRS1979

Development of inflatable structures for Electron Echo V

The sounding rocket experiment, Electron Echo V, was designed to carry three devices to study the neutralization effects of the rocket upon electron beams emitted into the earth's magnetosphere. One was a 500 square foot current collector screen built on a framework of inflated 'mylar' tubes. The other two were 30 foot long Langmuir probes consisting of inflated tubes with sensor pads at various intervals. These devices were designed to be deployed at an altitude of 92-118 mi (148-190 km) by compressed gas carried in the payload. The development of these large (by sounding rocket standards) inflatables and the methods of packaging and deployment are described.

Oliver, J. A.↗