Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ab initio anharmonic thermodynamic properties of cubic Ca Si O 3 perovskite

We present an ab initio study of the thermodynamic properties of cubic CaSiO 3 perovskite (CaPv) over the pressure and temperature range of the Earth's lower mantle. We compute the anharmonic phonon dispersions throughout the Brillouin zone by utilizing the phonon quasiparticle approach, which characterizes the intrinsic temperature dependence of phonon frequencies and, in principle, captures full anharmonicity. Such temperature-dependent phonon dispersions are used to calculate ab initio free energy in the thermodynamic limit (N → ∞) within the framework of the phonon gas model. Accurate free energy calculations enable us to investigate cubic CaPv's thermodynamic properties, e.g., thermal expansivity, Grüneisen parameter, bulk modulus, heat capacity and thermal equation of state, where anharmonic effects are demonstrated. Furthermore, the present methodology provides an important theoretical approach for exploring phase boundaries, thermodynamic, and thermoelastic properties of strongly anharmonic materials at high pressures and temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Asymmetric ferroelectricity by design in atomic-layer superlattices with broken inversion symmetry

In atomic-layer superlattices constructed using three constituent phases, CaTiO 3 , SrTiO 3 , and BaTiO 3 , the stacking sequence of the atomic layers is found to control the symmetry of the high-temperature dielectric response. In such a superlattice when a nanostructured asymmetric strain is programmed into the lattice via the stacking order, the natural symmetry at high temperatures is removed and a polarized sample is obtained in which the polarization increases as the temperature is lowered. Here, in contrast to a ferroelectric characterized by a bistable ground state with two equal and opposite electronic polarizations, our experiments show evidence of asymmetric ferroelectric correlations that set in when such a sample becomes hysteretic below a temperature T x , with two unequal polarization states. We further show that both the magnitude and direction of this ferroelectric asymmetry can be controlled by the engineered atomic-layer stacking order and periodicity of the superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Slow spin relaxation in single endohedral fullerene molecules

Well-protected magnetization, tunable quantum states, and long spin-relaxation time are desired for the use of magnetic molecules in spintronics and quantum information technologies. In this work, endohedral fullerene molecules M@C 28 with different transition-metal cores were explored through systematic first-principles calculations and spin dynamics analyses. Many of them have bias-tunable structure, stable magnetization, and sizable magnetic anisotropy energy. Furthermore, some of them may have spin-relaxation time up to several milliseconds for their quantum spin states at high temperature (~10 K) after full consideration of spin-vibration couplings. In conclusion, our results suggest that these M@C 28 provide a rich pool of single-molecule magnets for diverse applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

X-ray atomic mapping of quantum dots

We report a model-independent atomic-mapping technique for quantum dots (QDs) by combining Bragg reflection x-ray standing wave (XSW) and grazing incidence diffraction (GID) measurements. In this study, we choose GaAs capped InGaAs QDs/GaAs(001) as a model system to show the locations and arrangements of indium atoms within the QDs along various [hkl] directions. This technique directly reveals the actual amount of positional anisotropy and ordering fraction of indium atoms within the QDs by probing the (1¯11), (111), (311), (1¯31), (113), and (1¯13) crystallographic planes. We find that indium atoms are outwardly shifted along the [001] direction by small fractions of the lattice constant, 0.04a GaAs and 0.06a GaAs from Ga sites for 50- and 150-Å GaAs capped InGaAs QDs, respectively. We observe that an improved coherency factor of the indium atoms within the QDs by 45–60% along the [001] and [011] directions reduces the photoluminescence linewidth by 22%, thus making the QDs efficient for QD-laser and optoelectronic device applications. Here, we also find that the position and ordering of In atoms along the (113) and (1¯13) planes are most sensitive to the thickness of the GaAs cap layer. Our XSW-based results are supported by numerical calculations using a QD-macroscopic structural model based on our GID study. We thus show that this atomic-mapping technique will be useful for studying various quantum structures and tuning their properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal fluctuations and carrier localization induced by dynamic disorder in MAPbI 3 described by first-principles based tight-binding model

Halide perovskites are strongly influenced by large amplitude anharmonic lattice fluctuations at room temperature. We develop a tight binding model for dynamically disordered MAPbI$_3$ based on density functional theory (DFT) calculations to calculate electronic structure for finite temperature crystal structures at the length scale of thermal disorder and carrier localization. The model predicts individual Hamiltonian matrix elements and band structures with high accuracy, owing to the inclusion of additional matrix elements and descriptors for non-Coulombic interactions. We apply this model to electronic structure at length and time scales inaccessible to first principles methods, finding an increase in band gap, carrier mass, and the sub-picosecond fluctuations in these quantities with increasing temperature as well as the onset of carrier localization in large supercells induced by thermal disorder at 300 K. Finally, we identify the length scale $L^*= 5$ nm as the onset of localization in the electronic structure, associated with associated with decreasing band edge fluctuations, increasing carrier mass, and Rashba splitting approaching zero.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Persistence of negative vacancy and self-interstitial formation energies in atomistic models of amorphous silicon

We use classical potential atomistic modeling to demonstrate that negative vacancy and selfinterstitial formation energies are inherently present in amorphous silicon (a-Si). Our conclusions are based on comprehensive calculations of vacancy and self-interstitial formation energies in nine different models, ranging in size from 1000 to 2744 atoms and formed by quenching liquid Si at rates between 10 10 and 10 12 K/s. We account for a range of possible reference energies corresponding to different choices of reservoirs for atoms inserted into or removed from our models. Moreover, we show that successive addition of either vacancies or self-interstitials does not deplete the number of negative formation energy sites. Instead, it further lowers defect formation energies. Furthermore, these findings lead us to conclude that a-Si is not a structure at or near a local enthalpy minimum nor can it be brought to a local enthalpy minimum through the introduction of constitutional defects.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Data-centric framework for crystal structure identification in atomistic simulations using machine learning

Atomic-level modeling performed at large scales enables the investigation of mesoscale materials properties with atom-by-atom resolution. The spatial complexity of such cross-scale simulations renders them unsuitable for simple human visual inspection. Instead, specialized structure characterization techniques are required to aid interpretation. These have historically been challenging to construct, requiring significant intuition and effort. Here we propose an alternative framework for a fundamental structural characterization task: classifying atoms according to the crystal structure to which they belong. Our approach is data-centric and favors the employment of Machine Learning over heuristic rules of classification. A group of data-science tools and simple local descriptors of atomic structure are employed together with an efficient synthetic training set. We also introduce the first standard and publicly available benchmark data set for evaluation of algorithms for crystal-structure classification. Further, it is demonstrated that our data-centric framework outperforms all of the most popular heuristic methods—especially at high temperatures when lattices are the most distorted—while introducing a systematic route for generalization to new crystal structures. Moreover, through the use of outlier detection algorithms our approach is capable of discerning between amorphous atomic motifs (i.e., noncrystalline phases) and unknown crystal structures, making it uniquely suited for exploratory materials synthesis simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Gaussian approximation potential for amorphous Si : H

Hydrogenation of amorphous silicon (a–Si : H) is critical for reducing defect densities, passivating midgap states and surfaces, and improving photoconductivity in silicon-based electro-optical devices. Modeling the atomic-scale structure of this material is critical to understanding these processes, which in turn is needed to describe c–Si/a–Si : H heterojunctions that are at the heart of modern solar cells with world-record efficiency. Density functional theory (DFT) studies achieve the required high accuracy but are limited to moderate system sizes of 100 atoms or so by their high computational cost. Simulations of amorphous materials have been hindered by this high cost because large structural models are required to capture the medium-range order that is characteristic of such materials. Empirical potential models are much faster, but their accuracy is not sufficient to correctly describe the frustrated local structure. Data-driven, machine-learned interatomic potentials have broken this impasse and have been highly successful in describing a variety of amorphous materials in their elemental phase. Here, we extend the Gaussian approximation potential (GAP) for silicon by incorporating the interaction with hydrogen, thereby significantly improving the degree of realism with which amorphous silicon can be modeled. We show that our Si : H GAP enables the simulation of hydrogenated silicon with an accuracy very close to DFT but with computational expense and run times reduced by several orders of magnitude for large structures. Here, we demonstrate the capabilities of the Si : H GAP by creating models of hydrogenated liquid and amorphous silicon and showing that their energies, forces, and stresses are in excellent agreement with DFT results, and their structure as captured by bond and angle distributions are in agreement with both DFT and experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Visualization of defects in single-crystal and thin-film PdCoO 2 using aberration-corrected scanning transmission electron microscopy

Single-crystal delafossite PdCoO 2 is known to have an extremely low intrinsic impurity concentration of ~0.001%, demonstrating extraordinarily high conductivity with a mean free path of ~20 μm at low temperatures. However, when grown as thin films, the resistivity at room temperature increases by a factor of 3–80 times, depending on the film thickness. Using scanning transmission electron microscopy, we identify different classes of defects for the single crystal vs epitaxial thin film. The dominant defect for single-crystal PdCoO 2 is found to be ribbonlike defects. For the thin films, we identify different types of defects arising in epitaxial thin films mainly due to substrate termination that disrupt the lateral connectivity of the conducting planes. Further, our results are consistent with the high conductivity of single crystals and increased electrical resistivity of the thin films compared to that of single crystals, suggesting that selecting a proper substrate, improving surface quality, and reducing the step density are the keys to enhance the film quality for utilizing PdCoO 2 as a platform for future applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Crystal structure of vancomycin bound to the resistance determinant D -alanine- D -serine

Vancomycin is a glycopeptide antibiotic that for decades has been a mainstay of treatment for persistent bacterial infections. However, the spread of antibiotic resistance threatens its continued utility. In particular, vancomycin-resistant enterococci (VRE) have become a pressing clinical challenge. Vancomycin acts by binding and sequestering the intermediate Lipid II in cell-wall biosynthesis, specifically recognizing a D-alanine-D-alanine dipeptide motif within the Lipid II molecule. VRE achieve resistance by remodeling this motif to either D-alanine-D-lactate or D-alanine-D-serine; the former substitution essentially abolishes recognition by vancomycin of Lipid II, whereas the latter reduces the affinity of the antibiotic by roughly one order of magnitude. The complex of vancomycin bound to D-alanine-D-serine has been crystallized, and its 1.20 Å X-ray crystal structure is presented here. This structure reveals that the D-alanine-D-serine ligand is bound in essentially the same position and same pose as the native D-alanine-D-alanine ligand. The serine-containing ligand appears to be slightly too large to be comfortably accommodated in this way, suggesting one possible contribution to the reduced binding affinity. In addition, two flexible hydroxyl groups – one from the serine side chain of the ligand, and the other from a glucose sugar on the antibiotic – are locked into single conformations in the complex, which is likely to contribute an unfavorable entropic component to the recognition of the serine-containing ligand.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evolution of structure and spectroscopic properties of a new 1,3-diacetylpyrene polymorph with temperature and pressure

A new polymorph of 1,3-diacetylpyrene has been obtained from its melt and thoroughly characterized using single-crystal X-ray diffraction, steady-state UV–Vis spectroscopy and periodic density functional theory calculations. Experimental studies covered the temperature range from 90 to 390 K and the pressure range from atmospheric to 4.08 GPa. Optimal sample placement in a diamond anvil cell according to our previously presented methodology ensured over 80% data coverage up to 0.8 Å for a monoclinic sample. Unrestrained Hirshfeld atom refinement of the high-pressure crystal structures was successful and anharmonic behavior of carbonyl oxygen atoms was observed. Unlike the previously characterized polymorph, the structure of 2°AP-β is based on infinite π-stacks of antiparallel 2°AP molecules. 2°AP-β displays piezochromism and piezofluorochromism which are directly related to the variation in interplanar distances within the π-stacking. The importance of weak intermolecular interactions is reflected in the substantial negative thermal expansion coefficient of -55.8 (57) MK -1 in the direction of C—H∙∙∙O interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

ZrH2 as measured on ARCS for NXS2021

This data is for ZrH2 in an Al can it is measured at room temperature. This data was used for the Neutron and Xray scattering school in 2021. It was measured on the ARCS direct geometry spectrometer at the spallation neutron source. The .nxs files are event files that can be read and processed with Mantid. The nxspe files are auto reduced files that can be read with Mantid, Dave, or Mslice. Both types of files are hdf5 and can be read with any tool that reads hdf5.

MATERIALS SCIENCE↗
DOE OSTI2023

Electronic and Vibrational Coherence in Heterogeneous Electron Transfer (Final Report)

Interfacial electron transfer reactions constitute key physical phenomena central to a variety of energy related transport and conversion processes such as catalysis, photocatalysis, photovoltaics, energy storage, molecular electronics, etc. Heterogeneous material systems like organic/inorganic interfaces are of particular interest because they provide great potential to tailor properties according to application specific requirements. While electron transfer dynamics has been studied intensively in heterogeneous systems many questions remain unanswered. The significance of electronic-vibrational coupling and coherence is one aspect that has yet to be fully explored. The objective of this project is to develop and implement new ultrafast spectroscopic techniques based on pump four-wave mixing spectroscopy (pump-FWM) for studying the dynamics of vibrational coupling and coherence in heterogeneous electron transfer (HET) at molecule/semiconductor interfaces. The implementation of the spectroscopic setup allows to explore different four-wave mixing techniques and thus to identify a suitable approach to study the significance of vibrational as well as electronic coherence in HET.

14 SOLAR ENERGY↗
DOE OSTI2020

User Access to Scientific Facilities via 5G: A Cyber Security Thought Experiment

5G is more than an over-the-air radio technology upgrade. It is a strategy to extend Mobile Network Operator service offerings beyond traditional voice, instant messaging and Internet access. 5G Mobile Network Operators will offer new telecommunication services that include enhanced guarantees of confidentiality, integrity and availability. How could such services change the way Science collaborations connect scientists to supercomputers and other scientific facilities? Current scientific collaborations implicitly trust cloud service providers to securely store and process data. The perceived risks of outsourcing Science data security are counterbalanced by assurances that cloud providers operate at a scale that allows them to implement security measures impractical for Science collaborations (e.g. continuous system administrator behavioral monitoring and strict individual separation of duties). If that is true for a cloud service provider like Amazon Web Services (2018 revenue: $25.7 billion), could it also be true for Mobile Network Operators like Verizon Wireless (2018 revenue: $91.7 billion) or AT&T Mobility (2018 revenue: $71.3 billion)? DOE Leadership Class supercomputer facility users currently access them from the public Internet via Secure Shell. The sponsors and operators of the supercomputer facilities have determined that the public Internet path between the Scientist’s Device and the Login Node does not natively provide enough confidentiality or integrity to protect those communications. Therefore, the facilities achieve additional confidentiality and integrity by requiring Secure Shell encryption across those untrusted network paths. Using 5G Network Slice technology, a Mobile Network Operator may offer communication services between supercomputer users and facilities that natively provide confidentiality and integrity guarantees. Sponsors and operators of supercomputer facilities may determine that these guarantees provide enough confidentiality and integrity to protect those communications. If so, a 5G Network Slice could replace an SSH session running over the public Internet. Finally, this use case could be extended to other Office of Science user facility access requirements. Consider microscopy instruments at (e.g.) the Center for Nanoscale Materials or the Environmental Molecular Sciences Laboratory. The embedded systems controlling such instruments may not always support encrypted network access technologies like SSH. 5G Network Slices may offer an alternative to current VPN or SSH tunneling techniques, with additional benefits like guaranteed minimum bandwidth.

5G↗
DOE OSTI2023

A Study on the Synthesis and Proton Transport Behavior of Multilayered ZSM-5 Zeolite Nanosheet Membranes Laminated on Polymer Substrates

Single crystalline ZSM-5 ZNs with thicknesses around 6 nm were obtained by secondary growth of silicalite nanoparticles using diquaternary bis-1,5(tripropyl ammonium) pentamethylene diiodide (dC5) as a structure-directing agent (SDA). The dC5 could be effectively removed from the ZN pores by either high-temperature calcination or UV irradiation in air at room temperature but not by the piranha solution treatment. Ultrathin ZN-laminated membranes (ZNLMs) were fabricated by sandwiching a UV-activated multilayered ZN film between two recast Nafion® layers (ZNLM-Nafion) and by filtration coating from a suspension of thermally activated ZNs on a nonionic porous PVDF (ZNLM-PVDF). The ZNLMs on both supports demonstrated the ability of highly proton-selective ion conduction with low resistances in aqueous electrolyte solutions. The ZNLM-PVDF with PVDF binder was structurally stable, and it achieved a comparably low ASR but much higher proton selectivity compared with a Nafion membrane of same overall thickness. However, detachment between the ZNLM and Nafion layers occurred when the ZNLM-Nafion operated in aqueous electrolyte solutions. Results of this study show the potential for developing ZNLMs as efficient proton-conducting membranes without using expensive ionic polymer matrices. However, the development of polymer-supported ZNLMs is hindered by the current inefficiency in preparing well-dispersed suspensions of open-pore ZNs. Future development of efficient methods for synthesizing open-pore ZNs in dispersed states is key to realizing high-performance ZNLMs on polymers.

36 MATERIALS SCIENCE↗
NASA NTRS1973

A study of lunar models based on Apollo and other data

The research concerned with the interpretation of lunar data developed during the Apollo Program is reported. The areas of research include: X-ray emission spectra and molecular orbitals of lunar materials, magnetic properties of lunar rock, lunar features, thermal history and evolution of the moon, and the internal constitution and evolution of the moon.

Source record↗
NASA NTRS1987

Spectroscopic comparison of effects of electron radiation on mechanical properties of two polyimides

The differences in the radiation durabilities of two polyimide materials, Du Pont Kapton and General Electric Ultem, are compared. An explanation of the basic mechanisms which occur during exposure to electron radiation from analyses of infrared (IR) and electron paramagnetic resonance (EPR) spectroscopic data for each material is provided. The molecular model for Kapton was, in part, established from earlier modeling for Ultem (pp. 1293-1298 of IEEE Transactions on Nuclear Science, December 1984). Techniques for understanding the durability of one complex polymer based on the understanding of a different and equally complex polymer are demonstrated. The spectroscopic data showed that the primary radiation-generated change in the tensile properties of Ultem (a large reduction in tensile elongation) was due to crosslinking, which followed the capture by phenyl radicals of hydrogen atoms removed from gem-dimethyl groups. In contrast, the tensile properties of Kapton remained unchanged because radical-radical recombination, a self-mending process, took place.

Long, Edward R., Jr.↗
NASA NTRS1989

High resolution spectroscopy of the 11.3 micron emission band

High resolution spectra of the 11.3 micron emission band in M82 and NGC 7027 were obtained using the University of Texas IR echelle spectrometer on the IRTF in April 1988. The spectral resolution was 0.004 micron, with coverage from 11.0 to 11.6 microns. Spectra were measured at ten positions along a 10 min. long slit. Analysis of the data is still in progress, but initial results show no clear evidence of narrow structure within the feature. The analysis will involve comparison of the observed spectra to laboratory and predicted spectra of Polycylic Aromatic Hydrocarbons (PAHs) and Quenched Carbonaceous Composite (QCCs) to determine which may be responsible for the emission. The spectra will be examined with a goal of determining whether the emission is caused by molecular or solid state material. The data are also examined for evidence of variations in the shape and strength of the 11.3 micron feature with position on the sky. In NGC 7027 the 10 min. long slit went across the edge of the ionized nebulae, allowing comparison of emission from both ionized and neutral regions.

Achtermann, Jeff M.↗