Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “module efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Study on the spectral efficiency of SFH-GMSK in land mobile telephone communication by direct simulation

A spread spectrum system, slow frequency hopping with GMSK (Gaussian minimum shift keying) modulation (SFH-GMSK), is proposed for mobile telephone communications. The system performance is evaluated using computer simulation and is compared with an unspread system. Results show that under multipath fading conditions, when the signal-to-noise ratio (SNR) is greater than 15 dB, slow frequency hopping gives some bit error rate improvement over the unspread system. Theoretical predictions indicate that a system efficiency of 20-65 users per cell can be achieved in the cellular configuration. Joint use of SFH-GMSK and FM is also investigated. It is shown that FM interference can cause serious degradation to the SFH-GMSK performance.

Bao, H.↗

Space shuttle/food system study. Volume 2, Appendix G: Ground support system analysis. Appendix H: Galley functional details analysis

The capabilities for preflight feeding of flight personnel and the supply and control of the space shuttle flight food system were investigated to determine ground support requirements; and the functional details of an onboard food system galley are shown in photographic mockups. The elements which were identified as necessary to the efficient accomplishment of ground support functions include the following: (1) administration; (2) dietetics; (3) analytical laboratories; (4) flight food warehouse; (5) stowage module assembly area; (6) launch site module storage area; (7) alert crew restaurant and disperse crew galleys; (8) ground food warehouse; (9) manufacturing facilities; (10) transport; and (11) computer support. Each element is discussed according to the design criteria of minimum cost, maximum flexibility, reliability, and efficiency consistent with space shuttle requirements. The galley mockup overview illustrates the initial operation configuration, food stowage locations, meal assembly and serving trays, meal preparation configuration, serving, trash management, and the logistics of handling and cleanup equipment.

Source record↗

A compact roller-gear pitch-yaw joint module: Design and control issues

Robotic systems have been proposed as a means of accomplishing assembly and maintenance tasks in space. The desirable characteristics of these systems include compact size, low mass, high load capacity, and programmable compliance to improve assembly performance. In addition, the mechanical system must transmit power in such a way as to allow high performance control of the system. Efficiency, linearity, low backlash, low torque ripple, and low friction are all desirable characteristics. This work presents a pitch-yaw joint module designed and built to address these issues. Its effectiveness as a two degree-of-freedom manipulator using natural admittance control, a method of force control, is demonstrated.

Dohring, Mark E.↗

Flow characteristics of various swirl-can module designs

Flow measurements were performed on each of six swirl-can combustor module designs under simulated combustor operating conditions to find the design which exhibited a small recirculation zone, intense air mixing, and good fuel distribution in its wake. Conditions that are favorable for producing low oxides of nitrogen emissions and high combustion efficiency were investigated. The recirculation zone, the turbulence intensity and the fuel distribution pattern are obtained in the wake region of the center module of a three module array. The most promising swirl-can module design incorporates two air swirlers which discharge air in opposite directions (contraswirl), mixes the fuel and air upstream of the inner swirler, and has a flow area blockage of 64.3% for the three module array.

Mularz, E. J.↗

High efficiency low cost solar cell power

A concept for generating high-efficiency, low-cost, solar-cell power is outlined with reference to solar cell parameters, optical concentrators, and thermal control procedures. A design for a 12.5-kw power module for space operation is discussed noting the optical system, spectrum splitter, light conversion system, cell cooling, power conditioner, and tracking mechanism. It is found that for an unconcentrated array, efficiency approaches 60% when ten or more bandgaps are used. For a 12-band system, a computer program distributed bandgaps for maximum efficiency and equal cell currents. Rigid materials and thin films have been proposed for optical components and prisms, gratings, and dichroic mirrors have been recommended for spectrum splitting. Various radiator concepts are noted including that of Weatherston and Smith (1960) and Hedgepeth and Knapp (1978). The concept may be suitable for the Solar Power Satellite.

Bekey, I.↗

Effects of temperature, CO2/O2 concentrations and light intensity on cellular multiplication of microalgae, Euglena gracilis

Microalgae culture is likely to play an important role in aquatic food production modules in bioregenerative systems for producing feeds for fish, converting CO2 to O2 and remedying water quality as well as aquatic higher plants. In the present study, the effects of culture conditions on the cellular multiplication of microalgae, Euglena gracilis, was investigated as a fundamental study to determine the optimum culture conditions for microalgae production in aquatic food production modules including both microalgae culture and fish culture systems. E. gracilis was cultured under conditions with five levels of temperatures (25-33 degrees C), three levels of CO2 concentrations (2-6%), five levels of O2 concentrations (10-30%), and six levels of photosynthetic photon flux (20-200 micromoles m-2 s-1). The number of Euglena cells in a certain volume of solution was monitored with a microscope under each environmental condition. The multiplication rate of the cells was highest at temperatures of 27-31 degrees C, CO2 concentration of 4%, O2 concentration of 20% and photosynthetic photon flux of about 100 micromoles m-2 s-1. The results demonstrate that E. gracilis could efficiently produce biomass and convert CO2 to O2 under relatively low light intensities in aquatic food production modules. c2005 Published by Elsevier Ltd on behalf of COSPAR.

Euglena gracilis/drug effects/growth & development↗

Bandwidth efficient coding for fading channels - Code construction and performance analysis

The authors apply a general method of bounding the event error probability of trellis-coded modulation schemes to fading channels and use the effective length and the minimum-squared-product distance to replace the minimum-free-squared-Euclidean distance as code design parameters for Rayleigh and Rician fading channels with a substantial multipath component. They present 8-PSK trellis codes specifically constructed for fading channels that outperform equivalent codes designed for the additive white Gaussian noise channel when v is greater than or equal to 5. For quasiregular trellis codes there exists an efficient algorithm for evaluating event error probability, and numerical results on Pe which demonstrate the importance of the effective length as a code design parameter for fading channels with or without side information have been obtained. This is consistent with the case for binary signaling, where the Hamming distance remains the best code design parameter for fading channels. The authors show that the use of Reed-Solomon block codes with expanded signal sets becomes interesting only for large values of E(s)/N(0), where they begin to outperform trellis codes.

Schlegel, Christian↗

Exploiting the cannibalistic traits of Reed-Solomon codes

In Reed-Solomon codes and all other maximum distance separable codes, there is an intrinsic relationship between the size of the symbols in a codeword and the length of the codeword. Increasing the number of symbols in a codeword to improve the efficiency of the coding system thus requires using a larger set of symbols. However, long Reed-Solomon codes are difficult to implement and many communications or storage systems cannot easily accommodate an increased symbol size, e.g., M-ary frequency shift keying (FSK) and photon-counting pulse-position modulation demand a fixed symbol size. A technique for sharing redundancy among many different Reed-Solomon codewords to achieve the efficiency attainable in long Reed-Solomon codes without increasing the symbol size is described. Techniques both for calculating the performance of these new codes and for determining their encoder and decoder complexities is presented. These complexities are usually found to be substantially lower than conventional Reed-Solomon codes of similar performance.

Collins, O.↗

Crew Time Requirements in Future Space Greenhouses - What Can We Infer from Current Analog and Space Missions?

Efficient crop production will be required to advance humanity’s presence in space, and for this, accurate predictions of crew time in future space greenhouse modules will be crucial to design and operate these plant growth systems, and schedule crop production. Crew time estimates will also be critical for deciding priorities of automating different aspects of space crop production. Because it is difficult to capture in operational environments, crew time for plant cultivation has only been sporadically recorded in past analog and space missions. We propose a methodology for efficient categorizing and reporting of crew time in space plant growth systems: first identify the different tasks needed to operate the greenhouse module, second define a representative time period for data collection, third accurately report crew time for individual tasks - and their occurrence, and fourth use collected data to improve greenhouse modules and plant growth system designs. Using data from various analog facilities and from the Veggie hardware on ISS, and assumptions for different mission scenarios, we discuss how crew time for plant cultivation can be reduced with adequate choices of crops, automation, artificial intelligence (AI) and virtual assistants, and sufficient crew training. This has major implications for the design of future space greenhouse modules. For example, missions on future space stations or during interplanetary travel would save significant crew time by including leafy greens and microgreens for astronaut’s diet supplement, with automated watering, health and environmental checks, as well as AI managing maintenance schedules, and a virtual assistant for repair activities. This work was funded by NASA Space Biology through NASA postdoctoral program / USRA, by NASA’s Space Biology and Human Research Programs, and by the European Union Horizon 2020 program via the COMPET-07-2014 - Space exploration – Life-support subprogram (reference number: 636501).

Lucie Poulet↗

Crew Time Requirements in Future Space Greenhouses: What Can We Infer from Current Analog and Space Missions?

Efficient crop production will be required to advance humanity’s presence in space, and for this, accurate predictions of crew time in future space greenhouse modules will be crucial to design and operate these plant growth systems, and schedule crop production. Crew time estimates will also be critical for deciding priorities of automating different aspects of space crop production. Because it is difficult to capture in operational environments, crew time for plant cultivation has only been sporadically recorded in past analog and space missions. We propose a methodology for efficient categorizing and reporting of crew time in space plant growth systems: first identify the different tasks needed to operate the greenhouse module, second define a representative time period for data collection, third accurately report crew time for individual tasks - and their occurrence, and fourth use collected data to improve greenhouse modules and plant growth system designs. Using data from various analog facilities and from the Veggie hardware on ISS, and assumptions for different mission scenarios, we discuss how crew time for plant cultivation can be reduced with adequate choices of crops, automation, artificial intelligence (AI) and virtual assistants, and sufficient crew training. This has major implications for the design of future space greenhouse modules. For example, missions on future space stations or during interplanetary travel would save significant crew time by including leafy greens and microgreens for astronaut’s diet supplement, with automated watering, health and environmental checks, as well as AI managing maintenance schedules, and a virtual assistant for repair activities. This work was funded by NASA Space Biology through NASA postdoctoral program / USRA, by NASA’s Space Biology and Human Research Programs, and by the European Union Horizon 2020 program via the COMPET-07-2014 - Space exploration – Life-support subprogram (reference number: 636501).

Veggie↗

Space qualified Nd:YAG laser (phase 1 - design)

Results of a design study and preliminary design of a space qualified Nd:YAG laser are presented. A theoretical model of the laser was developed to allow the evaluation of the effects of various parameters on its performance. Various pump lamps were evaluated and sum pumping was considered. Cooling requirements were examined and cooling methods such as radiation, cryogenic and conductive were analysed. Power outputs and efficiences of various configurations and the pump and laser lifetime are discussed. Also considered were modulation and modulating methods.

Foster, J. D.↗

Proton-radiation damage in Gunn oscillators

The irradiation effects of 22 MeV protons on the electrical characteristics of GaAs continuous-wave Gunn oscillators was studied. The radio frequency power output was reduced by 3 decibels at proton fluences in the neighborhood of 1.5 x 10 to the 12th power protons/sq cm. Conductance measurements indicate that the carrier removal rate at high electric fields remained roughly 40 percent less than at low fields. Diode efficiencies of two device groups were found to be monotonically descreasing functions of fluence. Frequency modulation noise was generally unaffected by radiation, but the magnitude of the noise in the noise power spectrum increased significantly. These effects are partially accounted for, in a qualitative fashion, by a model of electron traps having field-dependent net-carrier capture rates and various response times.

Johnson, J. W.↗

Automated aray assembly, phase 2

A manufacturing process suitable for the large-scale production of silicon solar array modules at a cost of less than $500/peak kW is described. Factors which control the efficiency of ion implanted silicon solar cells, screen-printed thick film metallization, spray-on antireflection coating process, and panel assembly are discussed. Conclusions regarding technological readiness or cost effectiveness of individual process steps are presented.

Daiello, R. V.↗

Burner liner thermal/structural load modelling

The objective of this program is to develop a thermal data transfer computer program module for the Burner Liner Thermal-Structural Load Modelling Program. This will be accomplished by reviewing existing methodologies for thermal data transfer and selecting three heat transfer codes for application in this program, evaluating the selected codes to establish criteria for developing a computer program module to transfer thermal data from the heat transfer codes to selected stress analysis codes, developing the automated thermal load transfer module, and verifying and documenting the module. The overall objectives of this thermal transfer module are that it handle independent mesh configurations, perform the transfer in an accurate and efficient fashion and that the total system be flexible for future improvements.

Maffeo, R. J.↗

Space platform expendables resupply concept definition study

NASA has recognized that the capability for remote resupply of space platform expendable fluids will help transition space utilization into a new era of operational efficiency and cost/effectiveness. The emerging Orbital Maneuvering System (OMV) in conjunction with an expendables resupply module will introduce the capability for fluid resupply enabling satellite lifetime extension at locations beyond the range of the Orbiter. This report summarizes a supplemental study to the original Phase A study and is presented as addenda to that study.

Source record↗

Space platform expendables resupply concept definition study. Volume 1: Executive summary

NASA has recognized that the capability for remote resupply of space platform expendable fluids will help transition space utilization into a new era of operational efficiency and cost/effectiveness. The emerging Orbital Maneuvering System (OMV) in conjunction with an expendables resupply module will introduce the capability for fluid resupply enabling satellite lifetime extension at locations beyond the range of the Orbiter. This report summarizes a Phase A study of a remote resupply module for the OMV. Volume 1 is the executive summary.

Source record↗